Access The Network And Sharing Center
Mar 23, 2008
Just recently I turned on my laptop that runs Windows Vista Home premium and it won't identify the network. I haven't changed any of the settings on my laptop and it just started doing this. It will connect to my wireless network, but it says the Access is Local Only. There is a strong signal and everything and my roommate that has the exact same computer has no problem connecting and getting online.
Whenever I access the Network and Sharing Center and click on the red X to find out what the problem is, a window pops up and says "There might be a problem with one or more network adapters on this computer. It gives me 3 options for repair: Restart the DHCP client service. Plug a cable into the network adapter "Local Area Connection". Automatically get new IP settings for the network adapter "Wireless Network Connection" I have tried all three of these and none of them work.
View 7 Replies
ADVERTISEMENT
May 18, 2008
I click on view full map in Network and Sharing center on Vista, and I can see all the XP computers (because I installed the LLTD fix) sometimes I can click on the computers, sometimes I can't. I don't know why that is. Next, clicking on "View computers and devices" only shows my Laptop and router. Sometimes the other computers show up too, usually after a few tries or refreshes. When the XP computers do show up, and I double click to try to view the shared folders, I get the following error:
"Windows cannot access \Computer Name. Check the spelling of the name. Otherwise, there might be a problem with your network. To try to identify and resolve network problems, click Diagnose. Error code: 0x80070005 Access is denied."
Clicking on diagnose says this: "Windows did not find any problems with this computer's network connection." My firewalls are set to allow computers on the network. I've even turned them off and just let Windows Firewall do it's thing. I really don't understand the spelling error. I think if that can be fixed,
the network would work just fine.
View 5 Replies
View Related
Mar 23, 2008
I have 2 laptops running Vista Home Premium and a Desktop running XP Home -- all are using the same WORKGROUP workgroup. Laptop 1 can see the desktop and access files without issues. Laptop 1 can see laptop 2 in the "Network and Sharing Center", but cannot access any files on it. Laptop 2 cannot see the desktop at all, nor can I type the "\desktop" path to get to it. Laptop 2 can see Laptop 1 and access the files without issues.
Laptop 1 and Laptop 2 have all the same settings that I could think of. Network and File Sharing settings, workgroup definition, etc. In fact they are basically the same laptops. I have been trying to get this to work for days now. I have rebooted all machines at some point a few times.
View 5 Replies
View Related
Oct 17, 2008
The control panel opens fine. I can access all items in the control panel except "Network and sharing center" and the "User accounts" (I can't access this sections via the taskbar either). What happens when I open one of the two items is I get a popup saying the following; WINDOWS EXPLORER HAS STOPPED WORKING. I used to be able to access these items. And one day, I just coulodn't anymore... I'm using Vista Ultimate x64
View 9 Replies
View Related
May 19, 2008
I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
View 7 Replies
View Related
Oct 27, 2007
thats wat my problem is but I'm able to go online just its acting weird and also the network status thing has a red x instead of being filled in with blue
View 9 Replies
View Related
Jul 30, 2008
Network discovery
my selection on network discovery is custom i need it to say ON so it can find devices on the network.
I select on and apply but it goes back to custom any ideas
(it has sp3 too)
I hate to reload as there is a lot of work to do after its reloaded.
View 2 Replies
View Related
Mar 23, 2008
I have a laptop with Vista Home Premium & built in wired and wireless networking. The wireless is detected and seems to work fine, but when I go to Control Panel>Network & Sharing, the screen opens, but none of the links are ever clickable. and the screen will not respond to the minimize (-) or close (X) buttons. I am logged in to an account with admin rights, and never get a prompt asking for elevation when the network & sharing screen opens.
View 9 Replies
View Related
Feb 6, 2010
I am running Vista Business x32 on my laptop & last night everything on my laptop was working fine, and then this morning my wife says she cannot connect to the internet. I go and search for connections, 5 found including my router > hit connect and get a pop up cannot connect,> Diagnose > but still no luck (problem still exists).
So I open up the Network & Sharing Center only to find that it is blank. No network location (public/private), no sharing options, nothing. I noticed that there was an update last night so I system restored back to Monday, but still same problem. I am stumped. Attached is an image of my Network & Sharing Center. my 2 other desktops are connecting fine (a Vista and a Win7).
View 5 Replies
View Related
May 29, 2008
I have one the strangest bugs ever created; and no one else seems to get it. I cannot detect any (very very few; not even my XP Machines, will explain
soon) of my computers on any network (wireless) I connect to. When I installed Vista bare clean, it did detect my netword computers, even the XP ones. But now, I feel like I should reinstall Vista. But, I really don't want to restore all (I have over 40gb) of my data. That would just take forever. Is there anyway at all to restore ALL Vista's Networking features/software to normal. Or back to default. I cannot restore using System Restore. I have been having this for about a month now, and it really messes me up! Over a week of using it, I just cannot detect any of my Networks. I can in Ubuntu; but not in Vista (my primary OS). I really love Windows. But, this is one of the worst glitches I have ever had with it.
Is it possible to reinstall Vista's Network and Sharing Center? I really want to detect my XP machines again. You might say, install LTDD (??) onto the XP machines. Well, the problem is, it still does not work. When I was using this PC a while ago, they were detected fine. But now, I cannot find any PC (hardly any; dunno why) on my network. This even happens at my Local Library. My friend searched, and he found over 200.
View 9 Replies
View Related
Jun 17, 2008
My internet connection is thwarted when Vista detects Multiple Networks in the Network and Sharing Center. I want to select the "unidentified network" and delete it but there is no option to do this. The ISP is no help. Anyone run across this problem? ENVIRONMENT: Broadband connection direct from the modem. Not using wireless. Only one internet connection. Not on a network. Have not updated to SP1 yet.
View 8 Replies
View Related
Oct 27, 2009
Our main wireless internet connection has stopped working on one of the Dell laptops. It works fine on the other and the Mac. When attempting to connect, a "login dialog" appears where it asks for the user, pass and domain. I remember this happening to both Dells (Vista) when we first got the wireless router and the workaround was to manually create the connection.
I'm not sure what has happened to cause this laptop to stop connecting automatically, but I thought a good fix would be to manually create the connection again. Problem is, when I go to the Network window and click on "Network and Sharing Center" a new window briefly appears then disappears. Why is it doing this & how can I fix it??
View 5 Replies
View Related
Jun 18, 2008
For as long as I've had my new pc with 32-bit Vista I've had problems with the Network and Sharing Center. The problem never bothered me enough to really do too much about it but now, after a year of it I'm fed up and trying to fix it. So the problem is that I cannot open up the Network and Sharing Center properly. I click it, it takes about 5 minutes for the folder that pops up to be filled with any form of information, and then when the thing finally loads, not a single item inside the folder window is click-able. Under "Sharing and Discovery" there are the options for "Network Discovery," "File Sharing," etc. I can't click the drop-down arrows for any of those options nor can I click any of the options on the side of the window. I can't even close the window without going into Task Manager and sometimes that doesn't even work so I have to reboot the computer.
View 6 Replies
View Related
Mar 8, 2009
I posted this in general, but it does not appear there so I am posting it here too. I have a desktop PC with VISTA and a laptop with VISTA. The DT is connected to a router via a cable. The laptop is connected to the router via wireless. I have set all permissions that I can find and share wherever I can find. I can't access files on either PC from either PC. I get the message "Windows can not access \Lu-PCC" or what ever folder I try to access. I can get into the folder alled "public", but my files are not in that folder on either PC. The permissions for Lu-PCC is everyone full control, change and read
View 9 Replies
View Related
Mar 23, 2008
Have Vista and Xp Pro computers on network (Workgroup). Am able to see and access files from Vista unit. Can see XP Pro unit but am not able to (Access it) Access Denied. Have setup identical usernames and passwords on both, but am getting nowhere.
View 4 Replies
View Related
Feb 20, 2009
I'm trying to "go to " my other computer on my network. When I open "Network sharing center" it just keeps "indentifying". It first says I have public network, then it finds my network and for a second or 2 "it's idle. Then it starts identifying again. It would seem to me that it should identify, then be idle for me to "go to" the other computer.
View 7 Replies
View Related
May 6, 2008
I have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
View 9 Replies
View Related
May 20, 2008
from the two vista I can't see the pc with xp, but pc anywhere works! from vista with password sharing I can't access to vista without password sharing (request username and password, I type the username but the pc doesn't have any password and I get access denied) from xp I can't see all vista...
View 8 Replies
View Related
Jul 14, 2008
I have a computer running vista premium and a computer running xp home. Vista is nfts file system and xp is fat32 file system. Both are connected to a linksys wired router, both are online. I went to set up files sharing and thought I did. When I check my view network in vista I can see the xp machine and and vista machine. I have no acces to the xp machine. Is this because the xp machine is fat32 file system and vista is nfts. I was just checking some other post on another forum and found that fat32 can read ntfs and vice versa.
View 4 Replies
View Related
Sep 22, 2008
I have a home network with 2 desktops connected. 1 running XP Pro the other running Vista Ultimate. I am trying to set up file and printer sharing, but the Vista machine can not see the XP one, or the network printer. The printer is connected to the XP machine. The network groups are the same, but I can not see the pc or the printer.
View 4 Replies
View Related
Apr 4, 2009
I cannot seem to figure out with my network sharing. I have a wireless network with 2 laptops running Vista home premium and 1 xp-pro laptop all behind a linksys router. At this point I have all computer seeing and sharing (only from public folders) fine. I want to be able to share one of the partitons that I created on one of the Vista laptops(home premuim) as a share for backup, but other Vista laptop won't let me have access to it. It does however let me have access to the public sharing folder though. How can I access this Drive/partition?
Network discovery is on, file sharing is on, printer sharing is on, password protection is on, all computers have same corresponding usernames and passwords, properties of the particular partition in question is configured to share. All computers have the same workgroup name. What I am trying to do, in a nutshell, is to be able to use that one partition for backup images for all 3 computers(has a very large drive on that specific laptop) So I even though about maybe mapping that it into the public sharing folder, a workaround, if you will, but I'm not sure if it would give me the available premissions to be able to do what I need it for.
View 6 Replies
View Related
May 28, 2009
I have a File Sharing Problem. Here is the situation. Both Computers DELL and HP Desktops Running Vista Home Premium. Connected to the Network. Wited Connected. Details on both computers... Work Group = OFFICE
Network Discovery = ON
File Sharing = ON
Public Folder Sharing = ON
Password Protected Sharing = OFF
Media Sharing = ON
The HP Computer can see all Files and Folders on the DELL. Example Documents, Pictures, Music etc. I can open all these folders, add, delete etc. No Problems....
View 9 Replies
View Related
Aug 18, 2008
I have a HTPC running vista ultimate 32bit, 250gb OS drive and 1tb mirror storage drive (need some fault tolerance since my pics and music will be stored here.) I would like to have this machine also act as a mini server and be able to share out the folders housing my music and my pictures. ( makes it easier for me to dump off my recently taken pics from vacations that i may have dumped onto my laptop, and now that i am back home would like to dump back to the vista machine.) This machine is also part of a domain (a whole other nightmare to get vista to join my domain) My server is running windows 2003 standard.
I set folder permissions and and i just can't seem to get passed the access denied. when trying to open up one of the vista shared folders. from the domain controller i mapped the folders that i need and i can open them but can not make any changes or create new directories. what am i doing wrong? I know i am no expert when it comes to networking but xp has never given me this much of a headache. *the reason it is on a domain and not a workgroup - is to broaden my skill and familiarity with working with servers, Domain controllers and Active Directory*
View 9 Replies
View Related
May 14, 2008
I have spent 2 weeks on this now. I recently installed Vista Ultimate on my main pc (PC1), and using the default sharing wizard, shared a series of folders to the 'Everyone' group, as I allow my private home network to access my shares anonymously. Everything was working fine for the first few days, PC2 and PC3 where able to successfully access the shares, until one day it just stopped working and when PC2/PC3 attempted to access the shared folders via ‘Start > Network’ or UNC Path \VISTA , it would say “Access is Denied”. Having said that, to make it more complex, the shares are accessible if you type the folder share name, ie \VISTAMovies.......
View 9 Replies
View Related
Jul 3, 2008
i have all m network sharing turned on, I have followed a bunch of online tutorials. I still cannot share or recieve files on my vista computer. It works fine for my XP computer, just type in the path and its done. Not so with the Vista machine.
View 9 Replies
View Related
Feb 7, 2009
My main computer that has the printer installed is vista 64bit. The other computers around the house are XP pro 32bit. I can see the printer but when I try to print it says it does not the driver. I go to install additional drivers but it won't let it happen. I have a canon MP780 AIO printer. Can anyone tell me what needs to be done? I have googled but not found my answer.
View 6 Replies
View Related
May 8, 2008
I've searched online and know this problem exists for others, but couldn't find a solution. When I click on network and sharing it either doesn't open, or opens with a blank window then freezes. Anyone have a solution? If it matters, my eventual goal is to enable file sharing so that I can begin the process of transferring my files to a mac. So if there is an alternate way to enable this, plz let me know.
View 5 Replies
View Related
Mar 23, 2008
Have Vista Ultimate on 1 machine and XP Pro on the other. Was able to share files from XP to Vista but not, after all the trying, the other way. About a month ago I becan me unable to share either way. Can see each computer from either one. Have been reading various comments from poeple like me who are in the same boat. Have not had a clear indication on what to do. It seems to me that if Microsoft wants to push Vista then they have to catter to us relatively DUMB ones who are going to buy Vista.
Most poeple want to share their misic etc on their network and with the present layout that is not going to happen. It is alright if you are an IT Tech or System Administrator who has trained for this but the average person is not. Maybe all you Brains could come up with a Wizard to help us Dumb poeple out. Have had Vista from the beginning and have never had control of sharing .
View 4 Replies
View Related
May 6, 2009
I want to share folders on the network. One folder is the Documents folder. I go through the motion of sharing it and it shows that it is shared.
View 4 Replies
View Related
Mar 23, 2008
I am running Vista Ultimate - my computer is directly networked to the main computer and is set up for printer - file - etc sharing. Attached to the main computer is a Lexmark X5470 multi purpose printer. From my machine I can print with no problem at all , but I cannot get the scanner to operate!. In my network sharing centre - the printers are shown as X 5470 as a printer and also a seperate X 5470 as a Fax.
View 4 Replies
View Related
Mar 7, 2009
I am having an issue with accessing the host pc. I have shared a couple of folders on the host pc but when i try to access it from two other pc in our office i get an error of access denied. from the host pc i can access the files shared on the other two pc's. From pc 1 i can access the files on pc 2 and the same goes for pc 2 accessing pc 1 fils with no problem. ITs just when i try and access the host pc from pc 1 or pc 2 i can and i get the error saying access is denied. I have went onto the host pc and took off the firewall and also deleted the McAffee secuirty software and also when in and made sure the settings are on for file shairing but still nothing.
View 5 Replies
View Related
