Starting Up: Ran Fixboot And Fixmbr In Comand Prompt: Nothing
Apr 25, 2010
Have a HP dv5-z pavillion and I have a problem. 1st when I hooked up my external monitor to the laptop got "Atikmag driver has stopped responding but has recovered" a lot and then the computer would do a crash dump and restart. This Happened every once in a while only when monitor connected. BUT now I have different problem, I get sent to System Recovery Opitions and vista will not start up. I have attached the error readings.
Ran Fixboot and Fixmbr in Comand Prompt: Nothing
Ran Memory Diagnotics tool: Nothing
Problem Event Name: StartupRepairV2
Problem Signature 01: AutoFailover
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 6
Problem Signature 04: 917518
Problem Signature 05: NoRootCause
Problem Signature 06: CorruptVolume
Problem Signature 07: 0
Problem Signature 08: 1
Problem Signature 09: Chkdsk
Problem Signature 10: 0OS Version: 6.0.6000.2.0.0.256.1Locale ID: 1033
View 9 Replies
ADVERTISEMENT
Aug 12, 2008
how to make a batch file where you could start, disable, stop and manual for a service from the command prompt? for example instead of going to services.msc and right clicking on a service then clicking on properties then making the startup to be manual,automatic or disable. I could do with a batch file where i would just launch the batch file and it would make the startup to manual and then disable the service that i want to disable.
View 9 Replies
View Related
Oct 22, 2009
I'd like to verify that the MBR is Vista pure to overcome th near disaster escribed in DD 10 fails to resize | Forums. Does Vista have a fixMBR command that eliminates 3rd party crap from the MBR and leaves the partition table intact?
View 7 Replies
View Related
Feb 23, 2009
i got vista installed in AHCI sata mode i got xp installed in IDLE sata mode when i tried to boot up vista, it tries to boot up xp instead and bsod occured i used vista eRecovery i typed bootrec.exe /fixboot and it didnt work it still tries to boot into xp, i typed bootrec /scanos , it only scanned my D:Windows XP OS only.......
View 9 Replies
View Related
Sep 4, 2008
I messed up big time. I was increasing my virtual memory in my PC and when i was there set my C: to active. When i rebooted my PC i got a BOOTMGR is missing. So i went into repair via Vista installation disks and through the command prompt typed 'Bootsec /fixboot' then rebooted.
Then it said booting but didn't move. Then i decided to give up and do a reinstall, at expanding files i got the error Windows cannot install required files. Make sure all files required for installation are available and restart the installation. Error Code 0x8007000.
View 6 Replies
View Related
Dec 28, 2009
I don't see any way to get a DOS command line for VISTA. Is itg possible using VISTA?
View 9 Replies
View Related
Aug 23, 2009
how do you IM from command prompt? I've heard of it, and tried one method, but it didn't work. i used: net send <IP address here> message here. it may be wrong, but ive read that's how to do it. i tried it with a friend last night, but nothing worked. it just said it couldn't find the file.
View 6 Replies
View Related
Feb 21, 2009
Just trying to startup my laptop but all it is doing is showing the green bar going forward and nothing else happens, I can boot into safe mode ok and have also tried last known good config and booted from the Vista disk to do a restore, but still doesn't work.
I have also gone into msconfig and disable all non microsoft services and everything in startup.
View 9 Replies
View Related
May 4, 2009
Since getting the new machine, I have had continuing problems with keeping my extra dvd drive and HDDs operating (Code 43). After getting that solved I started experiencing problems with the HDDs not starting (Code 10). The dvd drive is always recognized, starts fine and stays running. Now my HDDs either will not start or aren't recognized. On the HDDs that don't start, I get a Code 10 error.....with a little more diagnostics I get an error message that Windows can load the driver software, but the software encounters a problem when trying to run. The driver is a Windows driver 6.0.6001.18000, not a third party driver.
I have extensively verified that ALL my hardware is Vista 64 bit compatible, is operating properly, all my drivers are up to date, all cables are tight, etc. In short, I have proven that this is not a hardware failure. I have even had one dvd and one HDD connected (on different Oxford boards) and operating correctly, but after an overnight reboot, the HDDs cannot be started because of the driver software problem.
The drive manufacturer, Western Digital, refuses to support EIDE drives connected via bridsgeboards to Firewire. The computer manufactuerer (HP) is equally clueless and their Tech Support doesn't even seem to understand the problem. They cop-out by saying it's a Microsft problem. And because Vista is pre-loaded, I don't have OEM disks to try a clean install....I can only do a System Restore.
View 4 Replies
View Related
Feb 13, 2010
the thread title says it all: I'm looking for a lightweight bootable command prompt which supports ntfs drives and supports x64 command line tools. Something like Freedos x64 or command.com x64 (if they existed which unfortunately they don't).
So far, all I can do is to boot into Windows' own command shell, but this is far from being lightweight. Every Linux supports booting into a pure command line mode, so there must be something similar for Windows with x64 support. Basically, the recovery console would suffice if it allowed using external command line tools, but afaik this is not the case.
View 9 Replies
View Related
Jan 1, 2008
How to disable the User Account Control Prompt for certain applicationDate: 12-29-2007 Article: KB946932
Result
Sometimes, you want to disable UAC prompt for certain application on a Windows Vista computer. You do not want to disable UAC for the whole computer.
Resolution
Using the tool and steps below, you may disable UAC prompt for the specific application. This does not disable the User Acount Control feature for the whole computer.
View 9 Replies
View Related
Jan 1, 2010
While re-installing Vista Home Premium recently, I seem to have lost the C-Prompt which I always found on the start menu under "system tools". Can anyone tell me how to get it back? I never had this happen before but I cannot seem to locate it.
View 9 Replies
View Related
May 15, 2009
Is there a way to bypass the security prompt under windows vista? Every time when I run the setup.exe I got a security prompt asking if I want to proceed further. I need to develop an application that will run a silent update in the background, and therefore I need to bypass the prompt to ensure the setup process will be executed without interruption. I have done quite a few research and couldn't find a solution to work around,
View 9 Replies
View Related
Jun 30, 2008
When I delete mail from my deleted items folder, I am always asked "are you sure." Is there a way to turn this prompt off?
View 5 Replies
View Related
Apr 19, 2008
When I want to open my C drive, it will prompt me to open my c drive with what program... How come it is like this as I thought when I double click, it will auto open to show the content in my C drive.
View 4 Replies
View Related
Nov 5, 2007
For power users Command Prompt is where you go to get work done quickly and efficiently. If you spend a lot of time using Command Prompt, why not customize the appearance and operation to your preferences? There are actually a few Command Prompt customizations that will make it more useful and good looking.
Just follow these steps to customize your Command Prompt:
Click on the Start Button and key in Command Prompt and hit Enter.
Once Command Prompt has started, right click on the top left icon in the menu bar and select Defaults. Alternatively you can select Properties if you want to have different settings for different Command Prompt shortcuts.
You will now see the four tabs of options to customize. The sections that I always work with are Font, Layout and Colors. To get started, click on the Font tab. Here you will be able to change the font and size used. If you would like a micro prompt as shown below, select Raster Fonts and size 4x6.
On the Layout tab you can specify the size and location of the window as well as the buffer. I usually only change the Screen Buffer Height setting. This controls how many previous command lines are saved and can be scrolled back up through. Increasing this value is useful if you are looking at a large directory with more than 300 files. I always increase the Height value to the max which is 9999.
The Color tab is where you get to have the most fun changing the look of your Command Prompt. Just select what you want to change the color for and then change the color.
Back on the Options tab I recommend turning on Quick Edit Mode. This allows you to easily highlight text without having to go to Edit -> Mark and copy it by just right clicking. Then you can paste it by simply right clicking once more....
View 0 Replies
View Related
Dec 20, 2008
When I start my laptop up, just normally, I log in. I have that thing where I have to log in using a username and password, something that I downloaded and put into my registry. Anyway, all the time, when I log in, it takes forever to load up, it just stays as welcome and doesnt load. I left it for half an hour and it still hadnt loaded! So, I turned it off and on again, and it worked. But, a couple of times, I had to turn it off and on about 5 times ,and when it didnt load, I had to start it again in safe mode. THEN it worked. But, I hate safe mode!
View 9 Replies
View Related
Jun 20, 2008
I have a Dell Inspiron running Vista. Had no problems until recently when the screensaver started to refuse to work. Even when I go to screen saver settings and select preview the screensaver just comes on for less than a second and goes off again.
I have got a wireless mouse but have always used it, I have tried unplugging it, but to no avail. I have also tried a selective startup with only microsoft programs on startup, but still no joy.
View 6 Replies
View Related
Jun 9, 2009
When I try to re-start Windows, the computer shuts down and try to start but instead beeps three times and don't start, then I have to press the power button to shut it down and wait about 10 minutes before starting again.
I have Windows Vista x64 on an Asus P6T Deluxe Intel X58 motherboard with 12GB RAM and an Intel i7 Extreme processor 965 with a Sceptre widescreen 22" monitor and a Thermaltake V1 cooling Fan with 800 watts power supply
View 6 Replies
View Related
Dec 13, 2008
Earlier today my computer had updates to intall so i clicked to install updates and shut down. This evening when I went to turn on my computer it said that iy had to run disk chk as it did this it said that file after file was corrupt and repairing this took a few minutes. After this the normal log in screnn appeared. I clicked on my name typed in my password then the screen went black and the pop up went as follows
Windows Activation
Reinstall Windows
Windows must be reinstalled to activate. Insert the windows installation DVD or CD into your computerto begin the reinstallation process.
I placed the cd in and nothing happened. I then started in safe mode and tried a system restore, but then I found I have no system restore points anymore. I tried to start with last known good start up but the same message appeared. I do not want to have to do a clean install as I have important work on my computer which isn't backed up.
View 6 Replies
View Related
Jul 8, 2008
I just installed a new video card MSI NX8800GT on a new Packard Bell that came with Vista pre-installed. I checked power supply which was sufficient (400w). Everything went smoothly also when installing the drivers which came on an MSI CD. When restarting the PC he blocked when he was on the desktop screen. After that it has been impossible to restart the pc. He blocks even before he starts uploading vista.
View 7 Replies
View Related
Mar 23, 2008
For some reason, Vista crashes as soon as a DVD (hardware or virtual) starts to play (BCCode e3). LiveTV and AVI play without any problem.I deinstalled some programmes, one of which was Nero 6 Express.This Nero was incompatible, but wanted to try it anyway. Although i cannot pinpoint the cause of the crashes, but i suspect my Nero experiment. Anybody any 'serious' clue of how to fix this?
View 4 Replies
View Related
Apr 12, 2009
Upon starting my computer I'm getting error 0xc0000428, ntoskrnl.exe is missing verified signature or something like that.
I am unable to use the startup repair from the recovery disc - I get an error called StartuprepairV2. I can not use system restore, and using cmd to copy the file from the DVD to my hard drive does not work (the file is still missing the digital signature). Bootrec doesn't fix the problem.
I have read somewhere that if startup repair does not work, you can update your vista version as a workaround. However I can not upgrade unless I delete SP1 first, but I don't know how to do that when I can't start windows.
Is there a way I can remove SP1 using command prompt ran from the recovery DVD? Or any other solution anyone can think of? (except for doing a clean install)
View 4 Replies
View Related
Mar 5, 2009
I'm trying to access 'cmd' but it wont let me. 'This has been disabled by the administrator for some reason. I am the administrator...
How can I enable this again?
View 6 Replies
View Related
Jun 9, 2008
for a regualr user's dos prompt (c:windowssystem32cmd.exe), how could one enable receive of drag and drop from explorer?
View 9 Replies
View Related
Mar 7, 2010
What is the administrator command prompt for 'defrag.exe' in 'cmd'? I am being asked when trying to open defrag.exe in cmd. It seems windows defrag was hijacked by DiskeeperLite, a downloaded program I thought was free, but turned out to be a mistake. When I want to run defrag now, I am asked to reinstall it via add or remove programs, which is not available in my Vista Home Premium, SP2, 32 bit. Is there a way to recover it? If not, that's not all bad, because I have 'Defraggler', which works quite nicely.
View 9 Replies
View Related
Jan 18, 2008
Got a question here: If Password protected sharing is off in Networking and Sharing Center in Vista...
why am I still getting a login prompt on my WinXP computer?
My network map:
The dashed line is a wireless connection; the solid line is a wired connection. "Nnet" is the wireless router. The switch is the hub which is a part of the wireless router. Michael-PC is Vista, and mdoccomputer is WinXP.
View 9 Replies
View Related
Apr 3, 2008
If I want to update my computer time to any one of five locations given to me by MS, I have to click the mouse six times. Is there a command prompt that will get me to that sixth click?
View 8 Replies
View Related
Mar 26, 2008
In the old good days there was a 'deltree' command (DOS & Win98) to delete folder with subfolders from the command line. Now, I need that to do in Vista. How to do that?
View 7 Replies
View Related
Oct 27, 2009
So I am trying to download a image burning software, however my husband has turned control freak and put an admin password and it keeps asking me for it. I dont care about the password I just want to know if there is a program I can download/install without being prompt for the password? Or is there a program already on vista that can burn iso discs?
View 6 Replies
View Related
Nov 5, 2007
Here are a few tips that will help you become a Command Prompt Pro:
Turn on Quick Edit Mode. This will allow you to easily select, copy and paste all with just your mouse and a right click. Details Here
When typing in a file or folder name, type in part of the name and then hit the TAB key to bring up matches. Use SHIFT +TAB to go the other direction.
When searching for a file, type in dir part_of_filename* to look for the file in the folder. To search sub directories as well, append the /s flag as well. Example: dir exp* /s
Use the up arrow to go back over past commands. Alternatively you can hit F7 and go directly to the command ......
View 0 Replies
View Related
