I had SpeedFan on my laptop but I didnt understand how to use it so i uninstalled it and now my laptop doesnt use its fan like it used and it overheats too much now. It also did not create a restore point before it installed. Is there a way to fix it?
I put in a new 120mm fan at the front of my case yesterday to increase air flow, and it does seem to be making a difference, just it's quite noisy. I've used speedfan to lower it to 60%, which makes it barely audible, but still good cooling.
The only problem now is that speedfan doesn't keep these settings after a restart, so is there a way/a program that can do this, so I don't need to do it through speedfan each time my PC starts up.
I booted vista and ran speedfan and It says my GPU temp is 0 degrees celsius. I thought, that can't be right, and I ran GPUZ and it says it is at 38 degrees. Is there a way I can get speedfan to say the actual temp? Because I would like to use speedfan
Not a problem but I bought a gateway computer that has an AMD Phenom quad core with 3gigs of ram.It came with Vista Home premium installed on it. OK so I dislike Vista so I rounded up all My drivers and bought another Harddrive and installed XP on it.Both os run very good with the exception that on XP the AMD runs about 8 degrees C hotter than on Vista.On Vista it idles at about 42c and on XP about 50c. I contacted AMD and they said it was within specs.I am wondering if anyone else has ever come across this situation.I used Speedfan and My bios to arrive at these temperatures. I have built a lot of computers before but I always used Pentium and I never realized how much hotter AMD runs.
i am running on Vista basic 32bit. the problem is that when i go to add a favorite on IE8, this message shows up. C:/Users/Name/Favorites/New Folder/Favorites/New Folder/Favorites refers to a location that is unavailable. is there any way to change it back to just favorites as it is driving me up the wall!
For some reason my shortcuts have program icons on them. I used a Windows teaking program awhile ago to remove the shortcut arrows and I dont think thats the problem cause' its been fine until now.
I've been "using" this forum for a long time, as a guest. I finally decided to register My problem is, I downloaded and tried to use Vista Visual Master (v1.0.2) to change my boot logo as mentioned in this forum. I also had to change the input languge to en-US. It didn't workout anyway. After closing the program i realised that my explorer settings have been changed (While browsing locally, every single folder opens another window.)
As well as my OEM info beeing deleted. So I opened the Folder Options to change the settings to the default position. I clicked Apply then OK. I logged off and on again and opened Computer. I double-clicked Local Disk and it opened another window. So I decided to download the theme program again. I downloaded it but i encountered an error saying that windows has blocked the destination (which is the Temp. folder) and now i can't even save a file I downloaded from the internet. I think this is a self-protection behavior becouse of the changed settings. P.S. I also tried to reset folder and desktop options from regedit.
I got my Vista computer 12 days ago and am trying to transfer stuff from my old XP. I created several "users" for different purposes and imported all my old messages from OE6 with no trouble. After a week I decided I didn't need all those users and now want to consolidate and move the old as well as the newest messages from to one users account to another.
I was doing fine as long as I drug the .eml files into an open Mail folder. But since the old Sent Items folder was very large I tried dragging it (after copying it to the Public area and changing the ownership) directly into the Windows Mail Local Folders area. When I opened up Windows Mail it did in fact show all of my old messages. But it wouldn't open any of them, and worse yet, it won't let me delete the phantom messages. If I drag any the .eml versions of those messages into the folder they show up as duplicates, and those are both readable and deletable. I need to know either how to find and delete the phantom files, or else how to recreate the Sent Items folder.
My friend is having a computer issue and I am her computer techie friend trying to help her fix it. I'm in a different city than she is, so sadly I can't see what the problem is, but I am computer savvy enough to know how to gain information from her. The problem: She said that the other day she clicked on a pop up (sounds like a vista-related pop up) that said something about a Hard Drive or Hardware…she wasn't 100% sure. She clicked 'continue' on the pop up and ever since those settings (for whatever it was) went into place, her visual graphic settings have been messed up.
It seems like her wallpaper is streched and larger than before (dosen't all fit on the screen) and her text and such when she surfs the net is larger than normal. She defined it as being "big and strechy". She is using an HP laptop on Vista. We tried messing with Display and Wallpaper settings -- tried all the different options (resolution, etc) and had no luck. Furthermore, we tried a restore….but the restore was unsuccessful. On what is likley an unrelated note (but I'll throw it in anyways), her HP Recovery drive is getting pretty full. She thinks it has something to do with it since it hasn't been like that, but I don't think it relates to the graphics problem. why her desktop background wallpaper is big and strechy and why her text when surfing the internet is so large?
Vista told me on Monday that my computer had new updates available. So, being the normal computer guy I am, I looked to see what they were. Mostly Security stuff for the system. So, I said sure lets update. Well, in the process, Vista turned off my system restore, and now takes about 10 min to come up after a reboot or shutdown. When I try to run or load programs, the system hangs up, and task manager has it at 100pct CPU use. Now I am going to do a total format and reinstall. My printer does not even work correctly now and it is only 3 months old. It ran great when I first got it. I think I am going to load up vista again and totally turn off the updates so it does not even temp me. OMGosh I don't want to but only thing I can do. TY Microsoft for wasting yet another weekend on redoing my computer.
I turned on my computer and it went into this menu where i could run a startup repair program or start windows normally. I started the repair program to try and fix whatever was wrong but it found nothing wrong. I told me to remove any new camera devices or media devices. I had not recently installed anything new, but i disconnected all my devices anyways. It still will not start correctly. I hit F8 in startup, and tried to boot in safe mode, but it keeps freezing on this file named windows/system32/drivers/crcdisk.sys. What is this crcdisk.sys file. im not bothered about keeping any existing files, i just want to be able to use and access the dekstop and internet again!
Video is REALLY funky. Using Vista Ultimate x64. Winodws that are opened all have terrible application windows. They come up but are very distorted and have lines and weird graphics jotting off in all directions. Whenever an application window is moved below the start bar, there is a weird triangle that is generated from left to right corners and extending upwards into the screen about 300 pixels or a 3or4 inches. Opening the start menu also has this affect, which makes the lower right side of the menu to become unreadable. This all started with pixels popping up all over the screen that i assumed were dead pixels until they started moving and flashing in conjunction with cursors, movies, or any other moving content onscreen. Although I have not tried another monitor, I am fairly certain that the result would be the same. The "broken" pixels started getting bigger, until, like now, they are 5 to 12 pixels per blotch. This morning I got the first bluescreen. 0x50. I will update with parameters when I get home. I have tried: Installing old, and new video drivers. When I do this vista stops the installation and says the file is failing. I have contacted NVidia and they have ensured me that I have the right one. I have also tried booting to my old OS on the 80 IDE.
Hi there, earlier i realised that my vista default font is different, i.e. the font for icons, on dialog boxes and even in firefox etc have got bolder in places and also not as fine.
How can i restore the default fonts? Ive checked the appearance options and it still says they are Segoe UI (thats the default font right?)
I am reading in this NG and all over the internet that cleaning the registry is a no, no. I am also informed that the registry can/does get all messed up/cluttered with all sorts of stuff, from removed programs, old pointers, etc, over time. So what/how do you fix this if you shouldn't use a registry cleaner???
I did something stupid with my system, and I really want to get it fixed basically I followed this instruction to install the new theme files.
'VistaOSX '09 Uninstall by =patrickgs on deviantART' (http://patrickgs.deviantart.com/art/VistaOSX-09-Uninstall-100318778)
I restarted my system after the 3rd step now my system is missing authui.dll browseui.dll imageres.dll shsvcs.dll themeui.dll uxtheme.dll
the files still exist in my system32 folder, just under a backup filename now whenever i start my system (i tried safe mood and command prompt),it will always end up in a black screen with my white mouse pointer.I can go into the system recovery options fine, but there no system restore points exists.
My problem has been going on for a while but has recently gone over the edge and caused me some big problems. I play Second Life and from time to time, it would freeze up my computer but yesterday, the screen of the laptop just went black and I had to hard reboot my computer, only for it to come up with the Vaio screen looking horrible graphically. Then it would commence to the normal boot up and then to a black screen and it stayed there all night. I've tried removing everything with Second Life off of my computer and it still won't boot up completely.
I tried leaving it on overnight to see if would bypass the black screen but it wouldn't. How should I go about fixing this? I can try getting my hands on the Vista DVD and or the recovery disks from my girlfriend. I would honestly just like to know what caused the problem and how to fix it because you can easily learn from your mistakes by fixing it. Oh, another interesting tidbit is that my brother used the computer beforehand to do some research then left it on and when he came back, the screen was black and when he rebooted it, the screen was messed up and he did a system restore to bring it back to normal but if I tried that now, it would still only boot up in safe mode and not regularly.
I love Age of Empires 2 (I own the Conquerors Expansion, Gold Edition). Only problem is that I recently got Windows Vista and have been experiencing these three problems:
1) The colors sometimes get messed up and the graphics become skewed. The most noticable example of this is when the grass becomes mixed with red blotches.
2) I'm having trouble connecting online with other players, regardless of their operating systems. My friends and I used to quickly and easily connect together but now the systems (mine and theirs) tend to crash.
3)Regular crashes about an hour or two into playing
I had two 100 name distribution lists in Outlook Express; when all data was transferred to new computer with VISTA, the lists were all messed up. Appears Windows Mail removes anywhere from the 1st three letters from the addresses. I seems to fix those I know what the real address should be but they keep changing (& getting between 50 & 100 undeliverables).
This is not a proud thing to admit but i have changed the layout of the keys onmy keyboard but i must of left a few letters out.without checking i had done them all right the programm said for changed to make place restart your computer which i did,now the problem i know my password to log into vist but with the keys changed i dont know which is where--- stop laughing
I wanted to create a partition to test Windows 7 on. At the time, I didn't know Partition Magic didn't play very nice with Vista... or 7 for that matter, so I went ahead and ran it... BAD idea. I suddenly started getting these odd invalid partition table errors and it kept saying it couldn't make the partition. I then restarted the computer which was an even worse idea because then it took me to the grey screen that talked about repairing the OS.
I didn't wanna do that. So instead I just booted into a tiny version of XP from a CD and pulled the files off that I wanted and started to reformat the drive. I then got an error saying it couldn't reformat it. It did erase all the files though..................
I wanted to use Partition Magic to partition my hard drive, so I used the boot CD. When I loaded it up, it said that there were 2 errors in my hard drive and it could fix them, so I pressed fix. Unfortunately, I was running Vista and I only know now that they're incompatible. However, now my hard drive is completely screwed! If I plug my hard drive into my computer, my computer refuses to do anything after POST, it doesn't boot a CD or run anything from the hard drive. I unplugged my hard drive and it's booting CDs now, even though my CD was the primary boot device anyway. All I want to do now is just get my hard drive fixed, I have all my data backed up, so I don't care if I lose everything on it!
i got hit with the "antivirus soft" virus a few days ago. i was able to run mcafee in safe mode and it didnt find it. on the next boot up, windows suggested i boot to an earlier save state. i did and how when i boot up on a normal vista boot up, i can't run anything. i can't even look through any of my files or folders. when i try to, i get the "not responding" message and i can't do anything. my question is this: is this something a defrag in safe mode can solve or do i have to reformat my laptop?