I'm trying to help out my sister on her laptop (Compaq Vista 32bit). Here are the problems:
Can not access Windows Security Center.. It comes up on the tool bar red with the X. When you try to open it either off the tool bar or even through the Control Center you get: A "open with" window to select the program to open "rundll32.exe". I have tried the tutuorial on this site to change security center from disabled to automatic, this did not work, it defaults back to disabled. Will not start up the Microsoft Security Essentials antivirus program automatically on startup. You must manaul start and either run as adminstrator to start or go through the "open with window" process. All program starts require to go through the "open with window" approach and some that does not work and you need to right click on the program and "run as administrator" to start the program (i.e. intenet exployer). I have manually run Microsoft Security Essentials and removed numerous virus and trojans.
I'm getting "a program needs your permission to continue" how do I add the program to a trusted list so I dont get this any more. Im bouncing around lots of different programs and its driving me crazy, I need to stop this for selected programs that I trust like putty
I have 2 situations here but I think they are related.
1. I have a couple programs that every time I go to start them I get "A program needs your permission to continue"I have to click "continue" so they will run.
2. i have several programs that on their desktop icons have the "Firewall Shield" on them. (shield divide into 4 colors)
How do I get the shields to go away?
How do I get the "need permission" message to stop coming up?
We installed an application on a Vista Enterprise machine. When the person that installed it is logged on, he can run the program by clicking the .exe, but a service that calls the program fails, and displays a message that says Run-time Error 429 ActiveX component cannot create object. If anyone else is logged on and runs the program by clicking the .exe, they get this same error. I think that the object in question is NTSVC.ocx, but can't be sure.
I have not come up with anything in regards to this. UAC is turned off on this machine. If you right click, select properties, the privilege level checkbox is unavailable - even when the original installer is logged in.
The following is a consistent warning that when this event happens it causes a hang in the os. Was wondering if anyone knows where I can find a driver that can take the place of the nvidia nforce sata control driver as the issue is caused by this driver....
I recently removed spyware off of a system Dell Inspiron 530s Running Windows Vista Home Basic.
I used Malware Bytes, and once removed, the computer wouldnt go on line.
I had the owner open up the Services Console and discovered that Security Center, Workstation, Server, and Windows Defender Services were disabled.
I changed the start-up types on these services and for each service I got an error stating that the service cannot start because of windows resource protection service.
I then had the owner run the sfc /scannow and got the same windows resource protection error....
My pc was infected a virus recently and it blocks me from turning my security center. I went through a virus scan and deleted it successfully but somehow I still cannot turn on the security center. How could I do to solve this?
Is it possible to disable the Security Center Alerts on Vista (no icon, no notifications) via command line or by script? Turning off UAC by modifying a certain registry entry turned out to be easy (using the reg.exe command line utility), however I can't find a way to do the same for the Security Center Alerts. I am willing to write some scripting code if that is what it takes.
so i ran reliability and performance monitor and it said that security center did not record an antivirus software. however, when i check security center itself, it says everything is on and has the green light beside avast! home edition. I have updated everything and tried reinstalls, but it does not help. I am running a vista home premium 64 bit on a toshiba L300.
I just updated Norton 2007 and installed Norton 2008, now Security Center notifies me that I don't have anti-virus protection, but norton appears to be operating correctly?
I am having some problems with my computer. I had a trojan, that I now have got rid off, but the thing is that I can't turn on the secutiry center. I get this message:
Every single time I log in to Windows, that bloody little pop-up comes in the notification area saying that my UAC is off and that this is a horrible problem.I know it's off. I turned it off. Why the hell would I be unaware of that?
So my question is, how do I stop that annoying notice coming up every single time I start Windows?
The security center in my computer was disabled, firewall, defender and update. I reset it to active (auto). After I restart the computer those function were disabled again. Even my Norton antivirus software were disabled and the system won't allow to install again. Is this cause by a virus? If so is there a free program in Microsoft web site to remove it. Norton or McAfee said they can remove the malware for a fee ($100.00) even though I am using their software. Or I have to format the computer and reinstall everything. Can someone out there went through the similar problem please share your exprience and solution?
i have a vista pc.since acquiring it,it has never ever downloaded updates even though it is set up to do it automatically.they all show as failed.As i write this,windows security centre is not responding as usual.Sometimes task manager will close it,but task manager has no minimize or close tab itself.
I've lost access to the Security Center page. All components, i.e., Firewall, Defender, etc. are still individually accessible and working fine with my Norton 360 v2. However all links to the Security Center page: Welcome Center, Control Panel, and Help & Support no longer work. I've tried the System File checker and System Restore utilities to no avail.Short of reinstalling Windows Vista and its SP1, is there anything else I can try?
The new Windows Security Center in Windows Vista can be just as annoying as the security centers in previous versions of Windows. I am an advanced of a computer user to know that I do not have anti-virus software installed. I don't need the Windows Security Center to remind me that all the time.
Thankfully there is a new easy way to disable the security center messages.
Click on the Security Center/Windows Security Alerts logo in the system tray.
Click Change the way Security Center alerts me.
Select I do not want notification messages from Security Center.
Security Center reports my firewall (Online Armor) as turned off when its working. I have tried rebuilding and deleting the WMI Repository it seems to work for a few days then Security Center reports online Armor is turned off.
I have DL a trogen and it seems to affected my browsers. My email works as well as quicken and Limewire as well as other update programs, but both of my browsers say they cannot display any webpages. Also, my security service center cannot be started.
After recently downloading recommended updates to my Windows Vista Ultimate system when I use MS I.E. to browse I get a red screen with the warning "Personal Security Alert New Data Base Update is Available. Viruses Detected on your PC. Following this is a signup sheet to subscribe ($$) to their Personal Security System. I can't get away from this screen without starting over with IE and once again the same thing happens! My ISP gives me a free McAfee Firewall and Virus Detection System which I have installed. I have turned off MS firewall and Anti Virus System. McAfee has scanned my system and reported it is clean.
I am currently having a problem with my Vista machine. Only recently I noticed Security center, Windows update, Windows defender, and windows firewall weren't functioning. The services to run these programs aren't there. For example, the security center service isn't in services. System restore is a no go as, well, that got disabled to My guess is a virus or some sort of malware got onto my pc and played riot. I got AVG internet security. I am hoping that I don't have to do a clean install.
When I start up my computer, there is a pop up that says that Windows Firewall is turned off. I click the button to turn it on and then a screen pops up that says "Security Center cannot turn on Windows Firewall." I then click on "Turn on Windows Firewall manually." It then says that it isn't using the recommended settings to protect my computer. I click "update settings now" but then it says that it was unable to make the requested updates. I use Windows Vista and I've had my computer for a year now. This only happened the other day and I have Symantec installed as my anti-virus program. How can I turn Windows Firewall on again?
How do I get Vista to stop annoying me about opening programs either at startup or when I open them manually? I've trying opening the security center and telling Vista not to alert me or display tray icon. But when I start up, I still get a publisher-not-verified warning about a program I want to run. And when I try to open it manually (or another app that contains an internal server), Vista (shield.exe) stops and asks me if I want to run it. If I take the checkmark out of "Always warn about this type of program," it's there's the next time anyway. I'd like to disable all this stuff. How do I go about it?
Whenever i log into my pc i get a warning from Windows Security Center sayin that AVG anti virus is turned off, when avg is actually running and the tray icon is showing in the system tray. Ive clicked on turn on now but Windows Security Center keeps comming up when i log in and i cant see whats wrong. Im running windows vista home premium 32-bit and AVG 8 free ...
Machine has an issue with the Security Center. Cannot launch most programs but can navigate the internet. Permissions problems prevent me from starting security center services. I know I can wipe the machine but there are some things I would like to retrieve... one being the Office 2007 PID.
I have vista 64 bit home premium. I have disabled UAC because I find it to be highly annoying. Another thing I find highly annoying is; no matter how much I try to stop it; vista always seems to think I am a moron and sets EVERY SINGLE ONE OF MY FILES to read only. Now I heard if you disable security center/windows defender you can un-readonly everything. I tried that; didnt work; yes I reset to make it active. Then I reactivated them; still didnt work. I tried a document on how to manually turn off Read Only; but even then it didnt work. Once; I dont know how; I managed to turn it off; but every single time that I installed something new it went to read only. It is REALLY annoying; and I swear this is pissing me off something chronic. I cant be a heavy computer user when I cant even do basic system operations since vista seems to think I am a straight jacket. Belive me though; if I dont find a way to turn it off; this computer will be dead and I will be in a striahgt jacket. I want either a way to EFFING TURN THIS OFF. or a patch offical or unoffical I DONT CARE I just want this read only stuff OFF. Now if you think I am overacting. It is hard to live with winamp constantly not showing your last playlist; or opera showing pages you had open when I first transfered the config files across. Trying to change settings on open source programs that refuse to change thanks to this ahem of a system that I cant disactivate. When I do; it turns itself BACK ON .
I am currently using Vista Home Premium. I had a problem with one of the current updates and had to use system restore. After the restore everything worked fine except that Mc Afee Security would no longer function, with the exception of the Firewall. Mc Afee indicated that the secuerity center was more than 30 days out of date. My system restore was set for less than 24 hours. Is this a normal situation and is there any way to prevent it in the future?
I have Microsoft windows defender installed. In Vista's Reliability and Performance Monitor, I continually get this message:"The security center has not recorded an anti-spyware product." on control panel->security, defender is recognized! the defender update/work fine... how do i get rid of the above "error" in In Vista's Reliability and Performance Monitor?
I just installed a fresh installation of Enterprisex64 a couple days ago. As I've been building up the system I mapped a drive to another computer on my network and continued to setup the new PC. Last night after installing a couple different DVD Burning programs (Roxio10 & Nero 8) I rebooted a couple times and noticed that my Security Center was turned off. I went into the services, turned it to Automatic and restarted the service.
Then I continued my work on building my system and realized I couldn't connect to my mapped drive, only to realize I could no longer see other computers on my network via Network Neighborhood or by \computername. My other computers on the network can see each other, just not this new box...........
I just installed and-virus and firewall software but Vista Security Center reports no anti-virus software installed. The anti-virus software reports all is well. Also before installing this I turned off Windows Firewall but still noticed that Vista is reporting Windows Defender running and active. I thought Defender is the firewall. I must be mistaken.
