Restoring Flight Sim X
Oct 24, 2009I want to restore Flight Sim X because of the stupid freeware I got. But I dunno how to keep my missions!
View 6 RepliesI want to restore Flight Sim X because of the stupid freeware I got. But I dunno how to keep my missions!
View 6 RepliesI got FSX Deluxe today and after running both disks and installing the game I get a notice saying: "Flight Simulator cannot run because the version of Microsoft DirectX(R) installed on your computer is incompatible. Please reinstall DirectX 9.0 by running Flight Simulator Setup, or download the current version from www.microsoft.com/directx."
I have downloaded the November 2008 Update from several websites and I am able to run them and get to the point that it brings up the "Installing Components" screen and then a notice comes up saying: "Setup has detected one or more DirectX component files are in-use by an application. Please exit all applications before running DirectX setup agian." After that it brings up a screen saying that the installation has failed with a "finish" button. I have closed all files and tried agian, restarted my computer and tried, turned my computer all the way off let it sit and read it a story and tried agian, I have combed through the processes in Task Manager and removed any that I believe could have been using DirectX and tried all the combinations above agian.
I am running a Dell Inspiron 1525 with 32 bit Vista Ultimate, and haven't had problems with any other games up to this point (World of Warcraft, Age of Empires, Halo, ect.). I am sorry if this is a repeat thread, I've been all over the place looking for possible answers and haven't found anything.
I am running vista on a brand new computer which has Ge-Force8800GS card, 2 Gb DDr memory and Intel core2duo processor. My problem is with Flight sim X. I am finding that the graphics on Vista in FSX are much worse than on my old XP setup. I have a 17in Medion flat screen monitor and have tried every resolution setting on it but no better. I have also downloaded service packs1 & 2 but no improvement.
View 7 Replies View RelatedI just bought a new PC. I went with the 64 bit vista, 8mb ram, good nvidia video card. When I install th eflight simulator X. It outo launches. I choose to create a desktop icon but it is not created. AFter I close the sim for the 1st time, I can not find it anywhere, not in program files, etc.
View 6 Replies View RelatedEverything about Microsoft Windows Flight Simulator works fine, except there is no sound whatsoever. What may be the cause of this? I haven't used the simulator in a while, and this is the first time on Vista Home Premium.
View 4 Replies View RelatedI have installed Flight simulator X the deluxe version. When I go to play it, it says (not enough room on hard drive to run. it says it only need 14 gb free to run it.
View 5 Replies View RelatedI have a dell 530s slim tower Inspriation desktop. All I want to do is be able to use the Windows Flight Sim Acceleration software. The card that comes with the computer doesn't have enough Horse power. I need a card that would be like a ge Force3 Radeon 8500 or better. The problem is getting a card that will fit in the case and slot. I'm told its a half card or slim profile. What will work? I would rather not spend more than $75. Is this doeable for something realiable. The Flight Sim without loading the Acceleration software that provides carrier ops, pylon racing etc. As I am a retired Marine Corps attack/fighter pilot it would be nice to try these.
View 9 Replies View RelatedMy wife's Emachine PC (produced just prior to Gateway's takeover of Emachines) originally came with Vista Home Premium on it. Because of some classes that she was taking, it was an absolute MUST that she had XP on it (she wouldn't even consider a virtual machine go figure?). So, we removed Vista and installed XP. Now that the class is done, her XP load is going screwy because of all kinds of garbage that my step-son did on it via various less-than-savory websites, and she wants Vista back. Between then and now we moved and we haven't the first clue where any of the restore CDs or DVDs are - BUT - there is a partition on the hard drive that was created by PC Angel. Is there any way that we can get the data from that partition back into place on the C drive and have a usable, bootable OS without having to jump through hoops or shelling out money for a new restore CD/DVD ? It would appear by the folder structures there and everything that I've seen in them that it's a full blown setup of Vista Home Premium.
View 9 Replies View RelatedA bit of confusion had occured during a repair of windows to fix the "Black Screen of Death (KSOD)" issue. I was told to use a Vista installation disk to repair a Dell laptop, as we no longer have the original disks. There was a question as to which version of windows was already on the hard drive and I chose the wrong one. (Not my fault, Dell gave me the wrong info).
The result was that, apparently, the old Windows (Vista Home Premium) was moved to c:windows.old and the new version (Vista Home Basic) was installed into c:windows. Therefore, all of his applications are no longer available. Is is possible to restore the old windows by booting to a command prompt and renaming the directories? The oringinal installation disks did not use a license key and I fear that, eventually, Genuine Advantage will ask for a license key. This is his only machine and I really want to help the kid out.
So I had a virus and long story short I was made to restore my system from the OS Disc that came with my laptop. Somehow I royally screwed things up and deleted my back-up restore drive D. All I have in the Computer Folder is Drive C and the D drive is now my DVD/CD drive. In addition all I had when Windows started up was an icon for the recycle bin. It seems everything is wiped out. I backed-up my personal files but none of the software. So, how can I fix this? How do I create a new back-up restore partition?
View 7 Replies View RelatedI saved my personal files (documents I created in Microsoft Word) to a DVD-RW. My computer began freezing repeatedly so had to be fixed - thus wiping out my documents. So now I can't find anywhere how I restore them to my computer.
View 9 Replies View RelatedI hope this is the correct group. I've been running XP Pro for quie some time and recently installed Vista using Partition Magic and have also installed Vista BootPro. I planned a full migration of all of my data from XP today but cannot boot into XP for some reason. I was going to export or save vital data from XP, so this is quite a bummer. I cannot enter Safe Mode nor use Last Known Good Config options for XP. My box makes it up to the "Starting Windows" screen and hangs there. After exporting the data I require from XP and saving to disk I was going to manually install all of my progs into Vista (Quite a plan for the 4th, huh?)Is there a method to utilize an XP Restore Point from Vista to enable me to boot into XP?
View 9 Replies View RelatedI was wondering, since a system restore is basically restoring your system to a state it was at before, does it have anything to do with files you have deleted/moved etc. (will a system restore undo file deletions?), or does it have only to do with things like the registry? (restoring key entries in the registry) What does it have to do with and not to do with? Secondly let's say you purchased a dell, it's going to be at factory condition, meaning it has windows and a bunch of other stuff on it. You install a fresh copy of windows via a windows cd, thereby deleting every driver and utility on there and have only a seemingly useless thing.
1. Will a system restore bring your computer back to factory condition? (the way it was when you bought it)
2. I also guess you can do a system restore if and only if you have a system restore point. How do you make one and how can you tell you've made one before? (in other words how can you tell you made one at a certain point and how it is like? Or, if someone else made one for you, how can you check this and what the restore point is like?)
I had to re-install Vista after a system crash. I was able to access the restore drive via DOS and pull out the pst (Office 2003) files and copy them to a USB drive. I only had 1 pst file on my system but Vista backed it up to 7 different files. Now when I try to add these files to the restored system I get an error saying the file is not a a personal folders file. I used SCANPST on the largest backed up file and it recovered some of my email but when I try to use SCANPST on the other 6 backup files it says the files are
not personal folders files.
I am able to backup my C drive to my D drive with no problems. The problem I have is that I cannot restore my C drive from the D drive that I have it backed up on. I tried to do it from both the desktop, and from the original install CD, and also a rescue disk that I created. I keep getting an error message telling me to restart. Nothing works that I try. Do any of you know what the difference is between True Image 11 and TI 2009?
View 9 Replies View Relatedi need to restore my computer back to the factory settings. problem is i don't have the disc everybody keeps mentioning. i use to have another computer with windows xp on it. i restored that computer without a disc no problem. is there a way to restore vista basic to factory settings without a disc?
View 7 Replies View Relatedmy understaning is that you can back up the contents of the Windows Live Mail folder to back up your email. (ie, you can later copy that back into your Windows Live Mail folder to restore) But it seems doing so borks the Vista indexer. For example, if I:
1) back up my Windows Live Mail folder
2) load a "clean" Vista image back onto the PC
3) copy the backup into the Windows Live Mail folder
When I do this, the contents of the Windows Live Mail folder are no longer included in the Vista index. Am I doing something wrong? Shouldn't the restored copy have the same index behavior?
My first time here and I've been looking through the very informative posts in this thread. I did not, however, find the answer to my particular problem. Apologies if I've overlooked it. Before sending my Sony for repair I created a system backup image on an external usb drive. When I start the Windows Recovery Environment and select 'Windows Complete Restore', it shows the name of the backup, the date it was created and the location where it is going to be restored to. Interestingly this shows a long, seemingly random number, followed by C: I can't change it. Immediately underneath there is an error message that reads: The Windows Recovery Environment needs to be loaded from a hard disk, but Windows needs to format that disk to restore your computer. Reboot from a CD or DVD and try the restore again. I did not get a Windows DVD with my computer. I do have a recovery DVD that I made when I got the computer but that doesn't seem
View 5 Replies View RelatedI inadvertently deleted a Folder is there any way I can restore the folder and its contents? I do not have a backup of my mail.
View 9 Replies View RelatedI had to rebuild my workstation. I performed a backup, but not a system recovery. Just want my files. It backed up all my files, but when I try to restore them using the restore client, it only shows a small subset of the files I had under my user directory. However, if I look at the ext. disk I backed them up to, I see hundreds of zip files. If I look into those files, I see all my missing files. How come I cannot see all these files in my restore client? Is there a way to fix this? P.S. I have taken ownership of these files using my new account.
View 7 Replies View RelatedPrior to reinstalling my Vista due to some troubles I made a backup on my F: drive. Having now reinstalled Vista I try and 'Restore'. From Windows Backup I get "There was an unexpected error: Backup has not been set up on this computer. An administrator must first create a backup before you can restore files (0x810000EE)Backup will now close. However if I look on my F drive I see my backup set and date made.
View 6 Replies View RelatedThis is a minor annoyance with the recycle bin. After accidentally deleting the recycle bin icon and restoring it. It displays as empty even when it is full. If I hit F5 the bin shows its correct status.
View 5 Replies View RelatedI currently am using vista 64 bit premium operating system. I have completed a system restore and when I try to save or view my favorites folder it does not work? After the restore I found my "favorites" folder in my "downloads" folder. When I try to use the "favorites" shortcut I can view my history, but my favorites are blank? If I go to my "favorites" folder in my "downloads" folder the favorites I have saved show up in there, but I cannot open them?
View 3 Replies View RelatedI wonder if anyone can help me regarding this problem. Incidentally I have read and tried the suggestions on the sticky on sleep mode problems but I feel this does not match my problem.
I have the computer booted and then I can connect to the internet OK when I leave the computer and put it into sleep mode this works OK, however when I return and wake it up I cannot get an Internet or email connection and the only way is to restart the system. Can anybody give me any ideas?
I've noticed that if you follow these steps, the cursor isn't on the file anymore:
1) Open a folder with some files.
2) Click on a file. Pressing the arrow keys should move the file selection around (I call this the cursor).
3) Minimize the window.
4) Restore the window.
5) The cursor isn't on the file anymore. The current selected file has a gray background. Pressing arrow keys have no effect on the file selection. Does anyone know how to fix this?