ICS: Ping In CMD Gives A "destination Host Unreachable" On Both Computers
Sep 8, 2009
there's 2 wired NICs, one getting internet from my dorm room, the other going out to my other pc. the second is an Asus EEEPC 1000HE, running Vista Business x32. I've tried a myriad of static, dynamic, IPv6 on/off, windows firewall off/on, etc. ping in CMD gives a "destination host unreachable" on both computers. wireshark doesn't show any traffic going to or from the PCs. I've spent about 3 weeks tinkering with this.
View 9 Replies
ADVERTISEMENT
Nov 10, 2008
I have 2 Vista machines...one behaves somewhat normally, but another that doesn't want to play nice. I can access the Internet, ping local XP machines, but when I try to access several NON-PC machines that are wireless...that is where the trouble begins. I am just trying to ping that machines locally and they wont respond fully. I mean, they don't time-out...then just give the dreaded "Destination Host is Unreachable" which is not true as other machines on the network can see them.I have tried to add ARP entries manually (which it won't let me do) It is driving me bonkers and I have been looking high and low for a solution. It just doesn't make any sense to me, especially since I have another machine that works just fine
View 4 Replies
View Related
Feb 23, 2010
I've been pulling my hair out over this one. I suspect it may have had malware infection, ran combofix, TrendMicro Sysclean, reset IPv4, disabled IPv6, reset the Winsock, uninstalled Expired Norton 360, installed Microsoft Security Essentials, tried it with the Firewall on and off, checked the registry for as many Winsock Redirectors and firewalls I could think of. I don't know of anything I've missed, I'm hoping someone here can think of something.
I can ping IP Addresses, but cannot ping any name, not even localhost. The DNSCache is caching names but it won't answer for application that resolves names, Including IE, Google Chrome, Firefox, tracert, nothing! It can browse the Internet with all installed browsers, if it uses my proxy server, since the proxy resolves names for the browser, but if it depends on the DNS Resolver Service it won't work. It is Vista basic that belongs to a customer and is not a member of a domain. I've posted pings, ipconfig /all, and net start below.
C:UsersTest>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 timetracert yahoo.com
Unable to resolve target system name yahoo.com.
Windows IP Configuration
Host Name . . . . . . . . . . . . : dana-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid......................
View 9 Replies
View Related
Jul 5, 2008
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Now I tried the following:.........
View 9 Replies
View Related
Feb 12, 2009
When i try to delete a mp3 file it tells me that its is denied(like as in thread title) i have restarted computer to make sure that it is not running in any thing but it wont let me. i am trying to delete it because nortan has detected a virus on it.
View 4 Replies
View Related
Feb 11, 2009
You know when you download something and that box comes up and asks you where you want to save? How do you change the destination if you check the little box that says "always save to this location"?
View 5 Replies
View Related
Mar 26, 2007
I am running Vista Ultimate on one PC and XP Pro SP2 on another. I am the only user and have full admin rights on both (I checked) They are connected by a wired home network. I can see and browse the XP PC from the Vista PC, install programs from the XP PC onto the Vista PC - no problem BUT.... when I am using the Vista PC and try to copy a file across from the XP PC I can see the file appear in the Vista folder (using drag & drop) but then I get the dreaded "Destination Folder Access Denied....You need permission to perform this action" you can only click 'RETRY.'or 'CANCEL'....of course RETRY just repeats the error window and Cancel removes the file that you have dropped into the destination folder. As I am the owner with full rights over the folder, does anyone know what this message means and how to set whatever 'permission' is required?
View 9 Replies
View Related
Aug 13, 2009
Trying to extract some files to c:program files folder. Login as administrator user. I'm the admin I should have every right to add file anywhere I'd like to, but of course I'm trying to delete system32 folder etc. the access denied is a good call..
View 6 Replies
View Related
Mar 30, 2008
How do i gain access to my folders when i'm already logged in as administrator. The folder path :Users\AppDataRoamingMicrosoftWindowsStart Menu, doesn't exist. I see it in the Guest folder but not for individual users. I also have trouble in other situations besides just favorites.
View 9 Replies
View Related
Apr 9, 2008
In particular, when saving an email attachement, in this case a word file, the default location is the Documents folder. How could I change this in Vista so that whenever I do a Save As, it points to my, lets say, Temp folder instead?
View 4 Replies
View Related
Sep 8, 2009
I download several .zip files a day, and when I extract them, the default destination folder is Documents. Is there any way to change the default to another folder? I am using Vista Home Edition.
View 5 Replies
View Related
Mar 27, 2010
I downloaded Comodo anti virus protection onto my vista homa basic laptop on recommendation of family but it proved to just be a big mess up and i swapped to another anti virus instead but It wont let me delete the folder after uninstalling it, I have tried turning user account control off and have also tried changing the ownership and even looked to see what permissions i do have, I have full control over the folder yet every time i try and delete it i just end up with the error note saying destination folder access denied, and that i do not have permissions to delete this file I don't know what to do I have tried everything I have found through forums too but nothing
View 6 Replies
View Related
Sep 24, 2008
Permission from who? I'm the only account/admin on my computer. This is not the only time I have received some kind of error message reporting to me I need permission/higher access--it's also happened when I tried to "Immune" my computer from known viruses using Spybot - Search & Destroy.
View 5 Replies
View Related
Dec 9, 2008
I edit my external HD sometimes to change names of my files & I get this message.
Destination Folder Access Denied, then I have to click Continue, then in user accounts control it says windows needs your permission to continue & I have to click Continue again. XP didn’t give me this run around, what’s the deal with Vista? I’ve searched but can’t find a fix for this.
I’m the Admin & can’t understand why Vista is treating me like a child & making me double check what I tell it to do. Isn’t my computer a PC or is it now owned by Vista!! That’s frustration coming out but I have other small issues about user unfriendly Vista where XP was user friendly.
View 9 Replies
View Related
Mar 23, 2008
I have Vista Home Premium, I am trying to add a Maxtor Shared Stroage II 320 GB Hard drive that is networked connected. I have installed the supplied software. The drive is up and running. I can access the drive but anytime I try to Move, Copy or send any file to the drive I get the following: "Destination Folder Access Denied, You need permission to perform this action." I have been on the phone with Seagate for hours, they have never seen this before. I have shut off my firewall, USC, Antivirus but no help.
View 5 Replies
View Related
Mar 23, 2008
I have a netgear box to box vpn which is working perfectly. I have tested the connection using xp computers at either end and they can ping each other, and the routers at each end no problem. Vista machines can ping other xp machines on the local network and also can ping google for instance, but cannot ping through the vpn to either the remote router or remote computers. The request simply times out. I have tried turning the firewall off and removing AV software.
View 5 Replies
View Related
Jan 20, 2009
I have problem with my MS/PING playing WoW and im very sure that is something about Vista. Why? becouse i just bought a new pc and i was playing with a btter ping and i had Win XP. At first i was playing with high latency. But then a friend of mine told me about some kind of trick with some .Net framework stuff he gave me, and my ping went below 100 after i installed it. Like magic. Now i have Vista 64 in my new pc, and i just cant believe that im playing at 360+ ping Again. I have been very carefull downloading only what is necessary, I mean, im not installing every crap i see on the inet. Im running task manager and i cant see anything strange or unusual.
View 5 Replies
View Related
Mar 23, 2008
I can ping my Vista Home Premium machine from my XP machine, but I can not ping from the Vista machine to the XP machine. What is wrong? The network setup:
XP-machine
ipconfig:
ip = 192.168.15.100
sub=192.168.15.255
gateway=192.168.15.1
arp -a shows the ethernet mac-adresse for the Vista machine
Connection to internet: Yes
No security is setup regarding IPSec.............
View 6 Replies
View Related
Aug 5, 2008
I have a Vista Home Primium computer on my home network. I noticed that i cannot connect to it from my other Windows xp computers yet from my vista computer i can connect to the WinXP computers. In looking into this further i realized that i cannot even ping my own ip address from the vista machine or any other machine on the network. However i can ping the loopback address 127.0.0.1.
I have so far tried disabling the windows firewall reinstalled network card drivers disabling IPV6 support within the dapter checked all ip configuration settings and ensured all computers are on the same workgroup and all seems to be ok..........
View 4 Replies
View Related
Sep 23, 2009
I was using my computer fine at first but decided to restart since I've had it on for 100 hours without a real shutdown (I was using hibernate). When I rebooted I was unable to access the internet using any programs such as IE, ff, msn, etc.. but I was still able to ping Google and get a <100ms response.
What happens when I open IE for example is that it simply says that it cannot connect to the internet. When I close it I get "Internet Explorer is not responding" twice in succession. I then get a warning telling me that it was blocked by DEP. So I disabled DEP and restarted but I still had the same problem just without the DEP warning.
This is very annoying because this is on my uni laptop and I need to use these programs almost daily in and out of class, so reinstalling is a last resort option. I'm currently running a previously installed version of Ubuntu on the same machine with no problems with the internet so I can eliminate any possibilities of it being a hardware problem.
View 1 Replies
View Related
Aug 23, 2008
T1 is a Vista machine that the is isolated on my home network in that no other PCs (2 XP, 1 Vista) on my network can reach him except T1 can reach the Windows shares on *all* of the other PCs. T1 has no problems browsing the Internet. I cannot ping T1 from the other PCs. Windows firewall is disabled on T1. I have disabled IP6 and the link layer discoveries butthat did no good.
View 9 Replies
View Related
Jun 16, 2008
I have Vista basic edition. At the CMD command line, I cannot ping anything successfully (e.g., www.cnn.com, www.google.com).However, with my broswer, my Internet connection is working fine.
View 9 Replies
View Related
May 27, 2008
I'm running Windows Vista Ultimate with IPv6 and Teredo installed and enabled, but it seems I am unable to ping any hosts on the local network (which consists of one other XP SP3 machine) or internet. Both computers are connected to a standard router (Dell TrueMobile 2300, which is
IPv4 only I believe). Still, an IPv4 router should not matter considering Teredo should be enabled on both computers. Running ipconfig returns the following:...........
View 5 Replies
View Related
Mar 23, 2008
I have an XP laptop (Wireless) and a Vista desktop (Wired) connected through a liksys wireless router. I can't get the xp machine to ping the vista machine. All firewalls are disabled and neither machine has any anti-virus or software. They both have connections to the internet and can even share files.
On the vista machine I have the network discovery turned on, the network is set to private and I have all the sharing options turned on. I even unchecked the "local area connection" to unprotect it from the firewall. (Even though the firewall is off). What would keep vista from responding to pings?
View 5 Replies
View Related
Jan 16, 2009
I owned a Asus N50Vn-C1S with Vista Home Premium 32-bit since a month now and a week ago I've been having some weird wireless problem. Sometimes my wireless works properly when i turn on the laptop for an hour or so, after 45 minutes it start getting slower and so on till it stop working. The weird part is that i can make ping to any website so it's not a DNS issue. I have the latest Intel 5100 AGN wireless drivers and the Device Manager said that it works properly.
When this happens I've tryied to flush the DNS via Command Prompt, tryied to change ip address (i use static IP, DHCP disable), tryied to turn off and on the wireless card via switch and Fn+F2, tryied to disable and enable the wireless network connection, tryied to let Vista repair it via Diagnose and Repair connection, tryied to turn off and on my wireless router and modem and nothing works! The only thing that works is if i restart Vista (logging off doesn't fix it either, only restarting OS). Firewall Off and AVG antivirus disabled. Already tryied to change the auto tuning tcp/ip level of Vista.
I think is some Vista issues because i tryied to see if it was my wireless router by using my other laptop (with XP) and it worked just fine. When this happens i am unable to use the browser or any other internet activity like MSN, Skype or even a Weather gadget with the exception that i CAN make a ping to any websites flawlessly! I was wondering if anyone had this problem or could give me any ideas, maybe a misconfiguration (Not very good using Vista, I've only tryied what i know that works on XP). it isnt range problem because I've tryied to be as closed to the wireless router as posible. I have a DI-624 D-Link Wireless Router and it works flawlessly with every other pc's and laptops of my house.
View 4 Replies
View Related
Mar 23, 2008
I have VISTA Home Premium. I recently uninstalled Symantec Security. After that, I could not access my home network. Now, I cannot even ping my own machine.
View 4 Replies
View Related
Jun 11, 2008
I've got a Vista laptop that normally resides within my company domain. I take it home periodically and I'm trying to print to my home computer. The laptop is Vista Ultimate and the home PC is Vista Home Premium. For some reason I can't see the home computer from the laptop. I also can't ping the home PC, but I can connect to the Internet. The laptop is on a WAN connection. If I click on the full map view in Network and Sharing center the laptop can see the home computer there. I assume this has to do with the laptop not being in the same workgroup as the home computer, but I'm unsure on how to work around that.
View 4 Replies
View Related
Mar 29, 2008
I'm still using Windows 98SE and I'm very happy with it. I had the
hard drive replaced 2 years ago, but that's been the only major
problem.
I've been reading this forum for a couple of months now and have
noticed the quantity of problems have increased quite a bit.
I back up important files regularly to Iomega, but fear one of these
days this system will come crashing down.
I'd like to replace my computer with a really good one (no concern for
cost), but fear a never ending battle with a VISTA OS. I also do not
like the prospect of deleting all the junk pre installed programs that
usually comes with a new computer.
Should I wait 6 months or a year until they clean up VISTA or should I
take the plunge now.
Once again, I'm happy with 98 but fear an irretrievable collapse.
View 9 Replies
View Related
Mar 23, 2008
I'm having some issues with acquiring an IP address via DHCP. When I statically set the address and try to ping anything I get General Failure as a result each time. This is the case when I ping 127.0.0.1 as well. I tried using a USB wireless card instead with the same results which is why I do not believe it is a hardware problem.
I have restarted in safe mode with networking which provides the same result. I've checked for any software firewalls that the user may have installed but found nothing. It is a Sony VAIO, so I can't rule out the Sony hid one somewhere and I just can't find it.
The machine is running Windows Vista Home Premium. When in the network and sharing center, there is a link between 'This computer' and (when the address is not static - unidentified network or when static - Network 2) but the next link has a red x through it. When I tell it to diagnose the problem it responds with "There might be a problem with one or more network adapters on this computer" and reccommends that I try to use wireless instead.wireless has the same problem,
View 9 Replies
View Related
Mar 23, 2008
Approximately a month ago or so I noticed that my box does not always go to sleep on its own....I can manually put it to sleep and it will stay asleep no matter how long I leave it...As soon as I hit any key on the keyboard it will of course wake instantly....There are also times that it will go to sleep on its own and once again it will stay asleep.....If I do a restart and walk away and then come back 5 to 10 minutes later it is asleep as it should be per the settings....I have researched the crap out of this issue and all settings seem to be correct and indeed must be if it does go to sleep on its own...I am running Vista business 32bit, Intel core2 6600, 4gigs DDR800 Intel Bad Axe D975XBX2 motherboard...
I have been running this machine since Vista was rc1 and of course when the official release was made I then purchased and installed Vista business.....I have had this minor glitch before and it always seemed to cure itself after a week or sometimes 2 weeks...that is probably why I have not worried about it too much....Am I missing something ?? I have of course looked in event viewer but I am not always sure what I am looking for....Who knows maybe SP1 may fix it once and for all but since this machine is constantly kept up to date with every fix needed or posted on win update then I do not really know how much of a difference I will see...This machine has always been smoking fast and rock solid but if it became even faster I do not think I will argue...
View 7 Replies
View Related
Dec 23, 2008
No networking. Nothing. Can not ping router, dns, other IP's, etc. The whole reason I upgraded to Vista Home Premium 64 was so that I can use the now 4+ gigs of ram I have (for some virtualization stuff I do) and mess with DirectX 10.
Anyway, vista installed flawlessly. The only only device that didn't install in the device manager was the ACPI (or whatever it's called) from the motherboard. For 2 whole days I have tried to get online using either of those network card. I have tried the following:..........
View 6 Replies
View Related
