I have enabled hidden files and protected System files in Explorer. There's about 5GB difference between the listed files and folders and the space used in drive properties. Does Vista REALLY hide things like the hibernation file? (Cos I can't see one on the C drive - pagefile is there but no hibernation file)
View 5 RepliesA multitude of files, folders and sub-folders have disappeared (all from my "Documents"). Miscellaneous sub-folders within folders have disappeared, while other sub-folders remain intact. At first I was completely lost, as the files were there not 30 minutes prior... After assuming the worst and thinking that they had corrupted or been deleted due to a virus, I:
- Made sure my folder options were set properly (I can view all hidden files)
- Thoroughly checked the recycle bin
- Did numerous searches
- Downloaded Google Desktop and searched some more
- Ran various "undelete" and "recovery" programs with no results
- Did a system restore...........
I have enabled viewing hidden files and folders. Still, some folders and files are hidden from me! Here is an example: I navigate to eMule folder, which should contain Incoming folder, but does not. I start up eMule, go to Tools and select Go To Incoming Folder and the folder opens up normally showing the files I have downloaded. This problem also exists with a game I own. I'm not able to view the map files I have created with the game. Yet when I start the editor and choose to open a previous map file, it is nicely there in the folder it is supposed to be in.
View 5 Replies View RelatedCan someone explain why I can't see these files? See http://www.jamielawson.com/personal/VistaIssues/hidden_psc_files.jpg JPG for more information. If I can't attached I will have to post on my website and repost a link. running Vista Ultimate 64 If you feel this post would be better served elsewhere (security, network sharing).
View 6 Replies View RelatedI have a problem. In the Folder Options/View/Advanced Settings my windows Home premium, dont show "Show hidden files" only "do not Show hidden files" ?? I Run as Administrator. I need see my Hidden Files...
View 5 Replies View RelatedI can't see hidden files due to a worm. I delete this worm but the problem is remaining!
View 4 Replies View RelatedI had some pictures in a folder, and as they were private photos I didn't want anyone else to see, I had decided to hide them, because I didn't know how to password protect them. They were in the pictures section of "My Computer," and now when I go to look at the pictures, I can't find them, and don't know how to get them back.
View 4 Replies View Relatedi am the only account on my computer and have all admin rights set so that i can get anywhere i want. I have the "hidden folder" option enabled. When i go to view certain hidden files such as cookies or doc temp, it doesnt allow.
View 4 Replies View RelatedI somehow managed to make all of my files hidden. Then I tried to show hidden files and now files I've never seen before are on my computer. A remember pressing a read-only button (I think). My brother said I have to go to each folder one by one and change them to not be hidden, but I don't know which ones are supposed to be showing and which ones aren't. Also, is there a way to make them show without having to go one by one; since I hid them all at once, that to me would seem logical.
View 9 Replies View RelatedI am unable to view Hidden Files and Folders,From Control panel I have set the flag to show hidden files and folders, click apply and OK but when I go to the folder where there should be another folder with my files in it there is nothing, If I copy this folder to my USB hard drive and then look at it with another computer it shows the folder and files.
View 9 Replies View RelatedEven if you turn on show hidden files in Windows Explorer some files will remain hidden. These files are super hidden. Set the registry value below to 1....
View 0 Replies View RelatedI have two programs that save files to different subfolders in their Program Files folders. These programs can access these files without a problem. However, I am unable to access these files through Explorer by browsing or searching. Even when I logged in as the administrator and searched in Explorer, none of these files were found. How can they be that hidden? I need to access them. How can I access them? Vista Home
2 accounts, 1 admin, 1 user
1 program installed under admin, as Vista program and ran as user
1 program installed under user, as XP SP2 compatiable and ran as admin
except hiding Hidden+System files, of course.
View 9 Replies View RelatedRecently I upgraded my computer. I have some hidden files on my external from my old system (XP). I cannot, for the life of me get these files to open.
Here is what I have tried:
- Changing ownership (after disabling the easy sharing folder option)
- Working with the admin command prompt (every time it said the folder on my external was a bad or syntactically incorrect entry).
- Changing user permissions.
- Logging in on safe mode and trying the above things.
The files show up as green text, and even after all of these attempts (and copious head-against-wall banging) I cannot open the files. Every program I try to open them with says “You do not have permission to access this file”. A similar message is displayed every time I try to move or change the files.
I have been able to open a few of the files (since the problem began) even though they do not seem to be different file types or status’.
I read a few threads similar to this, but every method has failed, and my problem seems a little different given the XP to Vista nature of the problem and the green text nonsense.
Basically i keep my thoughts personally secret as well as my files in PC, so i want to know how to hide hidden files and folders during search in Vista,when other person try or accidently saw those files and locations in my PC. I am using Vista 32 bit Ultimate version. I tried some options in index that didn't understand much about it to hide hidden folders and files during search. I don't want to show the search results that i made those folders and files hidden to be visible in search.
View 5 Replies View RelatedI have just purchased a new high capacity hard drive that I wish to install in my PC. I think this question has been asked before but all seem to want to copy their existing drive onto the new drive. I just want to start brand new fresh and clean. Dont want to transfer anything. I think I may have hidden virii or trojans in my old drive that I just want to be shed of.
how do I ensure that when I install the new drive it will be designated as c: I also have a d: drive that I use for music and data storage. Should I unplug the d drive while installing the new drive? I intend to install Vista Ultimate on the new drive. Also, microsoft authenticate this new installation of Vista given that it is on a brand new drive? I assume microsoft does some hardware checking to ensure any reinstallation is on the same and not a completely different computer.
I performed a Clean Install of Windows Vista Ultimate, on a new computer. I loaded all of my software in preparation of switching my production system from WXP to Vista. I then noticed something about the disk space.
I have 232 GB drive and C Properties indicated I was using 69 GB. Looking at the drive with Windows Explorer (Folder options are set to show all files), I tag all files and the properties show I am using 19 GB of storage. That is correct, as it is similar to the amount of storage used on several Vista beta systems. So, where is the missing 50 GB?
I found a program, WinDirStat (http://windirstat.info/) which confirms I am missing 50 GB as it does the same math I do and it labels the missing amount as Unknown. That is not terrible useful, as one would like to know what the actual files are.
I did all of the usual cleaning up (Disk Cleanup, clear the Recycle bin, remove all System Points and turn of Shadow Copies). The System Volume Information folder has only 20 KB of files in it. I surfed the Internet looking for other file management software which would show the missing files. I did not find any.
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
Right now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
i have all these temp files in the temp folder and they keep appearing and multiplying. The first time i found them the folder was near 8gb and i deleted all of them no problem. Now they are back again and it's getting close to 4gb but i can't delete them this time.
I couldn't find anything on google. The only two things that came up was something to do with some Offline Explorer Pro program and the other one was that some guys hard drive was failing. One of my drive did recently fail on me but it's not in the computer anymore.
I am having issues sharing files located on the C drive of my host computer. Both computers are running Vista Ultimate SP1. I have set up the sharing, but I get access denied when I attempt to access the files. what I need to change to fix this?
View 5 Replies View RelatedI have twp PC's a Vista Ultimate with two drives and XP Pro with two hard drives. I can access the files on the XP PC from the Vista PC, and I can access the files on the second drive (D: Drive) on the Vista PC from the XP{ PC. BUT I cannot access the files on the C: Drive of the Vista PC from the XP PC. When I look into the properties dialogue box for each drive on the Vista PC I see differences in the security options, where on the D: Drive I get "Everybody" as the Group/user name but for the C: Drive I get "Authenticated users".
View 4 Replies View RelatedI've been trying to back up my laptop since I bought it last year, but the
first time I did it, it said "backup failed" (I didn't look at why, just gave
up) and since then, every week when it does its sad little attempt to back
up, it says "last backup failed".
I finally decided to give it another crack tonight, but when I looked at the
D drive, it said that I only had 1.28GB free of just over 5GB. I looked in
the file to see if there was anything I could get rid of so I could start
from scratch, but apparently there's nothing in there apart from the little
RECOVERY file (87kb) which it says I shouldn't touch, so I'm not going to!
I am completely computer deficient and I have no idea about anything! I'd
be really grateful if someone could give me a clue (in Vista Backup for
Dummies terms) as to what's happening here and how I can FINALLY back up my
laptop, and maybe even begin to love it like I should!!
I have all of my personal folders on the D drive. Following a reinstall of Vista64 I again pointed the location of my personal folders back to the D drive (where the folders remained). I was able to take care of all of them except the Downloads folder which does not have a location tab. I am sure it was there on previous installs. What can I do?
View 4 Replies View RelatedI'm trying to reorganize files, folders, and new drive and cannot find any way to move files from one drive to the new one. I've tried everything and a couple of new little programs that are supposed to give me "ownership". Nothing will work for me. Right now I'm trying to move my Audible Books from old to new drive and cannot. I can't even delete them! I've turned UAC off and no change. Vista has me stumped.
View 9 Replies View RelatedI have a program which enables me to save embedded flash files to my hard drive. I just got a lap top, with Vista installed, and for some reason I am unable to see swf files that I save. They *are* there, because if I try to re-save the same file to the same folder, I get the file already exists message.
I never had this problem with XP, so I'm thinking it's something about Vista settings. I've already tried enabling show invisible files and checking "read only" in folder options.
I have a train collection and have a program called TrainTracker that I use to keep track of the pieces in my collection. I have the program on my home PC, which runs Widows XP, but when I bought my laptop about a year ago with Windows Vista Home Premium, I copied the program from my PC (Windws XP) onto a jump drive and pasted it onto my laptop (Vista). Everything was going according to plan.
Now I take my laptop where my trains are and I add a bunch of pieces and I want to copy the file from my laptop (Windows Vista) onto a jump drive, so I can then paste it onto my PC (Windows XP) and have the updated TrainTracker, with all the additions I've made. Well, when I copy it from Vista onto a jumpdrive, all it will copy is the original program which I transferred from my PC onto my laptop. It won't copy the new items I've added onto the program.
My son has done some college work at home and saved it directly to a brand new 4GB FAT32 USB flash drive, which he Ejected before removal. Now he is at college, and can't open the files. The directory structure is visible, but when he tries to open a file (for example a PNG), Windows reports the file is corrupted. He has emailed on of the files to me, and I get the same result. All the utilities I can find seem to focus on lost or deleted files, not corrupted ones.
View 4 Replies View Relatedthis is driving me crazy! I have now experienced this 3-4 times. It happens all of a sudden, and is scary. Some or most of my data suddenly disappears from my user folder (C:/users/username). First time it happened immediately after I installed Spyware Doctor, back in April, when they first released the x64 version. I have since restored all the data, and uninstalled Spyware Doctor. However, it happened again. The last two times, it just happened. I simply noticed that I had much more free space on my C drive (40GB more than the day before).
Last weekend, it mostly affected my photos, but other folders were missing also. I am running x64, on a HP machine with 6GB RAM. Luckaly, I perform multiple backups (TrueImage and Ghost), as well as Mozy. In each case I was able to restore all data, but it takes time, and more importantly, I don't trust my computer. I live in a fear - will my data be there tomorrow??? Or, has anyone else experienced anything similar?
i was copying some file and folders to my other hard drive and by mistake I deleted all my documents!!!, and now i do not have any thing in my document folder. I restored my system but i didn't get them back.
View 9 Replies View Related
Here are some necessary specifications:
Cable Modem: Arris CM450
Router: Linksys Wireless-G Router WRT54GL (DD-WRT software)
Firmware: DD-WRT v24-sp2 (07/22/09) std - build 12548M NEWD Eko
1TB Lacie NetworkSpace Ethernet drive
Laptop: Acer Aspire 5633WLMi
Windows Vista Home Premium 32-bit + Service Pack 2
802.11 a/b/g Wireless LAN: Intel RPO/Wireless 3945 ABG
The issue:
My 1TB LaCie NetworkSpace is attached to my Linksys WRT54GL router via Ethernet cable.
Whenever I try to copy files from my NetworkSpace over onto my laptop(wirelessy), my cable modem disconnects from the internet and 3 green LEDs start to blink (Power, Online and Cable).
I am left with no internet access.
However, as soon as the file has finished copying my modem reconnects to the internet again. All LEDs go back to their normal state again and I regain access to the internet..........