there's about 3 backups on that partition on my C: drive it has 9GB free this varies some days sometimes it goes up and down though I don't understand why my system restore was put from 15GB to 5GB and this is fine for me I defragment and disk clean alot I have 15GB of music and pictures when I first got the laptop there was about 9GB already filled so where has the rest of the space gone? all my friends laptops have 120GB and they have about 100GB left what's happend to mine and how can I get it back?
I tried to reformat vista home P. I followed all the steps to get to the advance boot option, selected Repair Your Computer, It went directly to log me on, there was no click Dell Factory Image Restore, no Yes, reformat hard drive and restore system software to factory conditions. It took me to the standard log on window. I tried this 3 times with no luck for a reformat to factory condition.
This is a tough one for me to explain but I will try very hard. I guess this started around late summer 09. I turned on my computer and it would run chkdsk over and over again. I let it go over night once and it was still scanning the hard drive over and over. Around Christmas time I reinstalled vista and still it would run chkdsk on every boot. Only this time, it ran once and then vista loaded fine. It would stop responding often and run slow but it was better. I manually turned off chkdsk but it made the computer run worse over time.
It would just not do anything so i would have to hold on the power button and turn it back on. The hard drive light will just stay on and the drive will sound a little different than usual. No clicking or metal on metal noise, just a different type of busy noise until you open something. Also you could use the disk clean up but not the defrag. It will say you should defrag volume so i would click defrag now. It would just show you the spinning blue circle and say analyzing but then say you should degrag volume again. So it won't defrag either. System restore also does not work.........
I have an Acer notebook with Vista SP2 oem . I intend to upgrade the internal drive from 80 to 500 GB but as the machine came with an early version of Vista home premium pre-installed I do not have a Vista cd to reinstall the os only a recovery dvd. I have a free version of Macrium reflect that I use to make an image of the comlete C: drive. Is it possible to swap hard drives and copy this image to the new hard drive without any prior formatting or os loaded on it.
I just got a brand new Vista x64 desktop PC today, and I've been spending all day getting everything installed and properly set up. I just can't decide what to do with the system restore feature though. In the Windows scheduler I've blocked it from running after system startup, settling for a supposed once a day restore point creation.
Unfortunately that's not really how things work in the real world - I feel like I can't do a damn thing without Vista deciding it had better spend yet another ten minutes creating a new restore point. Obviously a lot of that is due to all the day one application installs I've been doing, but even on my previous Vista PC (a laptop), I would usually see several restore point creations every day through what constitutes normal PC use for me...........
I backup up data to a remote Western Digital drive using the Vista Backup verything seems fine. I selected to backup all files on the "Back Up Files" menu except TV Shows, Compressed Files and Additional Files. My question is, If this hard drive dies and no longer lets me access it (which is what happened to my last XP computer) can I save registry and all other files that will let me restore to another hard drive with the least amount of hassle? Also is there anyway I can save profiles and passwords and the like. Ideally, I'd like to backup my entire hard drive and be able reinstall it to a new hard drive if this one dies. When my XP hard drive died I had my documents saved but had a real problem with this other information.
Would someone know of any utility or method to restore a SATA hard drive's factory full capacity size? During partitioning my drive, it went from 595GB (640GB Drive) to only 32GB. Since it is a 64-Bit system, I can't find a utility to restore the drive's full capacity.
I cant do system restore it say somthink about the c drive ihave done a scan its telling me that the c drive is ok Also the spell has gone please help cause Im pulling my haie out Im using vista and internet explorer.
First off, after restarting my computer one day, I found it to either not get past the loading screen or freeze 5 minutes after if i could log on. I tried a few things that did not work and went to do a system restore from the windows repair tools upon booting up. When i tried to restore i get the message that a system restore cannot be done because the C drive had errors. It prompted me to do a disk consistency check upon restart which i did. After trying a few times i find that it always freezes at 7% through, and will not move. Finally, i tried booting into safe mode, only to find that it too freezes when it is loading files, always at windows/system32/drivers/crcdisk.sys. The computer is only 2 months old, bought brand new at best buy. A rocketfish 550watt power supply and Geforce 9800 video card were installed by the employees, but no other hardware was replaced or tampered with.
i have vista home os system its a dell inspiron 1501 2 gigs of ram and a 80 gig hard drive but when i log onto my system it says i have a 60 gig hard drive can anyone help i just want to find out why it does this
The Hard Drive LED light on my Sony Vaio keeps blinking EVERY SECOND. When it's really quiet I can hear it too, it's constantly writing. Constantly. I did my research - read all the threads on the net and so far I have disabled:
Windows index Windows defender Windows search Superfetch System Restore Readyboost Defragmenter I have uninstalled google desktop.
The system is totally virus and spyware free, and the anti-virus is not scanning (schedule scan disabled). All Vista updates are installed. Nothing has helped. I've run out of things to disable. I'm running Vista Business SP1, Dual Core 2.2 Ghz, 3 Gb RAM.
Why can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
I have a ASUS laptop running Vista Home Premium, 64 bit OS. I have several programs that I use but no loner have the insall disks for. Should I have to reformat in the future I would hate to lose them. Here's what I'm thinking: Buy a extrenal hard drive. Seagate, 1Tbit, usb, cost $90.00. Copy my hard drive to it. If I need to reformat. Reinstall Vista from my recover disk that came with the computer. Then copy files from external drive. Bingo. All my old programs would be there and working. Question is: Can this be done? What file/folders do I need to copy to the external drive?
After installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
I have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
Is it possible to copy my entire hard drive onto an external hard drive. Vista Premium, all the data, etc. and what would be a good software to accomplish this?
I have an external hard drive, I reformated it so I could use Vista's backup.Now it seems that when my brother inlaw tries to put some music files(Itunes) that the hard disc is unavailable to his computer. At this stage it seems that Vista has conned me into destroying a perfectly good WD harddrive!I have created a second partion on the hard drive and I am reformatting that, as I write this, but the only formatting option seems to be this NTFS, and that is what I had already formatted the ExtHD to so I think this formatting will be to no avail!From what I can figure I need to format into FAT but I tried a quick format an ex-fat option was there, but the problem was the same. I am becoming more frustrated with Vista, seems I just keep running into things that should be simple and aren't!
I am Using Vista Ultimate 64. I would like to tranfer my entire drive incuding all files and the Operating system From my current IDE HDD to a new SATA Drive of the sames size (500 Gig) I need the IDE Drive for an older computer ( The 40 Gig IBM Deathstar still functions great, but all programs seem more bloated these Days)
Anyway I went to Administrative Tools and Formated the New Drive NFTS with no Drive Letter. But I cannot get it recognized as a transfer device when I go to system backup. Can I use 'C' on the second and soon to be only drive? If I have to use E or F for now can I change it back later. would that affect the file system? I intend to Low level Format the IDE and try cloning the old machine's XP Drive (32 bit) to it in the second place.
Not sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
I am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
I wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
I am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories 2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option 3.. At the command prompt type vssadmin list shadowstorage and Press Enter (NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
The mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
when booting up from a vista cd I accidentally had my usb external hard drive plugged in and the drive has been emptied and replaced by windows there are sintimental photos etc on the drive can anyone help me to restore them
I was wonder if anyone know a solution for the following problem. I have a ethernet hard drive and I've never had a problem until using vista and windows server 2008. both operating systems are unable to browse the drive, instead it completely crashes explorer.exe. Windows server 2003 & XP have never had trouble.
i bought a kit for an old hard drive. i got it to work once ealier today, and now it doesn't work. when i plug it into the usb, it will not successfully install. the kit is a rocketfish hd 35, the hard drive is seagate u8 model st313021a. the "remove hardware" icon appears in the tray, but no designated lettered drive appears on the computer.
the hard drive was part of an older tower that i couldn't get to boot. it's strange because just today i accessed the hard drive and located old pictures, music and other files that i hadn't seen in a few years. had i known this would have happened i would have started saving right away. i thought i had it working.
