I've been trying to upgrade from Home Premium to Ultimate, but the only available button is the clean installation, which I don't want to lose my files. I went to the help and support and checked to see if Premium to Ultimate was available without doing the clean installation, and yes, I should have the upgrade button. But why don't I have it?
View 5 RepliesI had already upgraded my xp media center to vista home premium. I want to reinstall it but don't want 2 partitions if i don't need them. xp was backed up along with other program that came with the computer at time of purchase on partition D: FAT32. my question is do i need this or is it safe now for me to delete it via computer management? I want to run my computer partition free.
View 5 Replies View RelatedI recently updated my main Vista Ultimate PC with SP1 without problems but have 2 more PC's with Vista Home Premium full retail O.S. I would like to format the hard drives in each while installing Vista and wondered if I needed to install the latest Intel motherboard drivers/software before installing SP1 from a purchased stand alone disk or if I would be better off to just install Vista and then SP1 with it's built-in Intel drivers, then update them later if needed?
I am on a dial-up internet connection and don't want to download SP1 twice more! Both of these PC's have the same Intel DG965WH m-board, same DVD multi-drives, same Core2 Duo processors, same 3 GB's of DDR2 800 Mhz RAM, same nVidia 7600 GT GPU's, same IDT onboard audio. All of the above are listed on Microsoft's Hardware Compatibility site as Vista Certified.
I recently updated my main Vista Ultimate PC with SP1 without problems but have 2 more PC's with Vista Home Premium full retail O.S. I would like to format the hard drives in each while installing Vista and wondered if I needed to install the latest Intel motherboard drivers/software before installing SP1 from a purchased stand alone disk or if I would be better off to just install Vista and then SP1 with it's built-in Intel drivers, then update them later if needed? I am on a dial-up internet connection and don't want to download SP1 twice more! Both of these PC's have the same Intel DG965WH m-board, same DVD multi-drives, same Core2 Duo processors, same 3 GB's of DDR2 800 Mhz RAM, same nVidia 7600 GT GPU's, same IDT onboard audio. All of the above are listed on Microsoft's Hardware Compatibility site as Vista Certified.
View 5 Replies View RelatedI own a product key for vista premium and I later upgraded to ultimate online. I do not own an ultimate product key and I want to reinstall vista on a clean hdd. What can I do to install ultimate? (I have a confimration number of my "ultimate upgrade" order but it's not shown even on digiital locker")How can I install ultimate on a clean hdd if I own a premium product key but I bought an upgrade to ultimate?
View 6 Replies View RelatedI apologize for the length of this diatribe. Here we go. I bought a new computer two years ago. It. came with Vista Home Premium 32 bit. I upgraded to Vista Ultimate 32 bit. No problem. I saved a full image of Ultimate to an external HD using Acronis. I did a clean install of Win 7 Beta when it was released. I decided to remove the Win 7 Beta and go back to Vista Ultimate using the Acronis Image. The Acronis image of Vista Ultimate destroyed my boot sector and I could not go back to the Vista Ultimate image so I did a repair using the Win 7 repair DVD I had made. That fixed the boot problem.......
View 9 Replies View RelatedSeems that a number of individuals have had issues with upgrading legitimate copies of Vista Home Premium to Vista Ultimate. Using the upgrade media provided, the upgrade seems to fail during the last few steps by indicating rather cryptically that a component could not be configured. There is no indiation as to which component didn't get configured.
Now, I do not understand why this should happen. I used the upgrade advisor which indicated to me that the recommended version of Vista was Ultimate and there were no hardware/software/driver issues identified. Why can't I just upgrade then? Why do I have to disable all drivers except for the video, keyboard, and mouse to get a good upgrade? All drivers are Vista certified - I have no hardware whatsoever that isn't certified with Vista and am assuming that this certified hardware comes with certified drivers.
I have been unsuccessful so far in updating my system. I would really love to see Microsoft take ownership here and supply us with an upgrade disk that does what it indicates on the box. I should not have this much difficulty upgrading my system. After all, Microsoft developed the upgrade system and is selling it to the general public. Just insert the disk, add the key, and click install. What could be easier?
Does anyone have any suggestions? I do not really want to go through the hassle of disabling all drivers - if that is required, then instructions should have been included with the update disk on how to do this. Will Microsoft change this and provide a cleaner install DVD. If not, can I get my money back? Should I upgrade to something else?
Is there any way to upgrade from home premium 64 to ultimate 64? I feel kind of silly asking this question because it seems like it should be so simple, but I cannot figure it out.
View 6 Replies View RelatedI bought a new HP dv7-1175 yesterday and need to upgrade it to Ultimate from my July 2008 disk from my MSDN subscription (Vista with SP1 x64 and x86). When I put in my (valid) activation code is just says "An error has occurred" and to restart the installation. When I bypass the activation and choose the Ultimate x64 it disables the upgrade option. I do not want to do a fresh install because I know what a driver hassle people are having with that option and I am more of an XP experienced installer.
View 7 Replies View RelatedIs there an upgrade from Home Premium 64 to Ultimate 64? If so, would it be
available through an MSDN download?
I'm trying to get my new HP dv7 laptop set up to join my home office domain
so I can transfer files, etc. Home Premium won't allow domain membership! My
son-in-law (network engineer) told me I need Ultimate for that. I don't
really want to do a new install from scratch and have to do clean reinstalls
on all my existing software.
I've recently needed to reformat my hard drive due to a problem, when I originally received my computer it came with Home Premium which I had upgraded to Ultimate. I have reinstalled Home Premium and have all my programs reinstalled and setup as they should be. Now when I try to reinstall the Ultimate version, whether from the boot cd or from within Home Premium I get the message that 'upgrade is disabled'. I was led to believe
that I could upgrade from Home Premium to Ultimate. I do not remember if I ran into this problem when I first purchased the Ultimate software because it was installed on the computer prior to any software installations.
This might be a silly question, but I need some advice. I have Vista Home Premium 32 bit, and since the release of windows 7, the price of Vista Ultimate has dropped dramatically. My questions are these. What would be the benefit of upgrading to vista ultimate on a home PC or should I just upgrade to Windows 7?
View 8 Replies View RelatedTwo days ago, I purchased a PC equpped wit Vista Home Premium. As I need Vista Business as a minimum for other applications, I purchased an upgrade to Ultimate as well. Today I wanted to install the upgradeand everything seemed to go fine, but everytime my PC is restarted, it boots into Home Premium again. Being 50 now, I am a mouse clicker and not an expert if it comes down to software and installation problems. I am sur it is a configuration problem, but I do not know where to start.
View 7 Replies View Relatedi have several 32bit vista ultimates on other machines. the 64bit machine has Home Premium and i'd wanted to go ultimate on it as well. i saw "Anytime Upgrade" and using the name only postponed the upgrade till i had funds and time to do the upgrade. surprise 1, anytime refers to paying for the upgrade. i was sure to use the 64bit machine to order and postponed my expectations on using the ultimate features until the DVD arrived to me in alaska.
since the upgrade order process said it was scanning my machine i was sure i'd get the 64bit disk. surprise 2, disk was the 32bit DVD tho it was plus SP1 so i guess it did scan my machine in some fashion. in the package the instructions on ordering 64 bit media are given. use this web site and order. you'll have to pay even more and wait even longer but you'll get the ultimate upgrade ultimatly. surprise 3 the web site after putting in the product key from the ultimate upgrade dvd package gives the error "No Offer Found"
I had a copy of Ultimate laying around the house and decided for some stupid reason to upgrade the OS yesterday. It's been a nightmare. After 10 hours I've reinstalled many, many programs and have been able to get the to launch all of them with the exception of Outlook. I've searched for a solution and have had no luck following a solution to the problem I'm encountering.
I'm getting the following error message:
>>> Cannot open your default e-mail folders. An unexpected error has occured. MAPI was unable to load the information service mspst.dll. Be sure the service is correctly installed and configured.<<<
I have successfully used Outlook 2007 for the past 6 months on my home PC. The problems I am encountering began immediately following the upgrade to Ultimate (32 bit--I thought I'd have less problems with drivers going 32 bit route than trying 64). I am hoping to salvage my contacts and calendar if at all possible (I have them backed up on an external drive but it's not current about 6 weeks old...I see an Outlook.pst in Windows.old but I cannot open it). I've had to reinstall Office Ultimate 2007 and I have run repair three times. All the Microsoft Windows Ultimate updates are installed. Not sure if this is related but the Office Ultimate Disc 2 will not install properly.
I have a full version of Home Premium and have been running it for a year or more.
I bought Vista Ultimate upgrade. However when I try and install and upgrade
to Premium I get a message saying.
You need a newer version of this software to upgrade.
I am running Vista SP1. It offers to do a clean install, which I do not want.
What does Ultimate want? It is so vague.
If it is an upgrade it certainly does not need a clean install.
I have a disc and a code of Vista Ultimate, can it be used to install Home Basic/Premium? Or I need a seperate disc of Home Basic/Premium?
View 4 Replies View RelatedJust finished my upgrade from Home Premium x64 SP1 to Ultimate x64 SP1. I've been lurking here on the forum for a while now and having seen quite a few folks having problems with their upgrades, I thought a post sharing the steps I took, which resulted in a Smooooth and problem free upgrade, might be of interest to some.
In no way am I advocating or recommending ANY of the steps that are shown here (i.e. turning off the firewall, etc.).
First phase:
-Purchase and download the upgrade to my hard drive (shoparhive.com was less costly than digital locker). Since I live 40 miles away from the nearest store, I preferred the digital download.
-Extract the .iso file using winrar to an empty folder on the desktop.
-Performed full system virus scan.
-Performed full system spyware scan.
-Performed full system backup to the removable HP media drive.
-Burn the downloaded iso file to dvd, and the extracted files to another dvd.
Second phase:....................
I had already upgraded my xp media center to vista home premium. I want to reinstall it but don't want 2 partitions if i don't need them. xp was backed up along with other program that came with the computer at time of purchase on partition D: FAT32 my question is do i need this or is it safe now for me to delete it via computer management I want to run my computer partition free.
View 5 Replies View RelatedPurchased an HP notebook with premium and set it up but did not activate yet. Then purchased an Ultimate Upgrade with anytime upgrade. Installed the upgrade using the key from the bottom of the PC when it asked for the current product key. No errors. Finishes the upgrade and restarts and still is running Home Premium. Why did ultimate not take? We need ultimate to login to a domain.
View 9 Replies View RelatedI have XP Home on my computer, and it works great. Should i do a clean install for best results? The only problem would be reinstalling many programs. I am unsure about the back-up and reinstalling method, and getting the programs to work as they did in XP.
View 8 Replies View RelatedI understand this can be done online. The information says that I need the Anytime upgrade disk to complete the process. Is this so? Sorry to be stupid but need to know the steps involved. If I dont have an anytime upgrade disk, how do I get one?
View 9 Replies View RelatedDo I need an upgrade version of Win-7? if so, which? Or do I simply wipe off WinXP and install a Win7 Home Premium full fresh install?
View 4 Replies View RelatedCurrently I am running Windows Vista.
I find that I am able to boot up the Windows 7 Upgrade DVD (from Vista). Can I perform a Clean Install from the DVD ? This is because I learn that a lot of fellows have problems in upgrading from Vista.Besides, if we can perform a clean install from the Upgrade DVD, what will be the difference between an Upgrade DVD and a Standard one ?
My ageing Thinkpad with XP Pro died so I've decided to build a new custom desktop from scratch. Can I install Vista Ultimate upgrade directly without having to install XP first? I would like to have a clean install of Vista, not an upgrade. Also since XP Pro license was activated on the Thinkpad, do I need to call MS and get another activation key??
View 5 Replies View Relatedevery time i try and install vista ultimate x64 it freezes almost right after it loads all the files (when it gets to the screen with the typical blue vista background). i've tried pulling out one memory dimm at a time (i read in a thread that was one guys problem) but still nothing happened (i did this many times to test all the dimms), i've tried plugging my hd and cd drive in different sata ports, and still no dice. i'm at a real loss as to what my problem is, and how to fix it
View 4 Replies View RelatedIt's easy - and you need install Windows only once. Basically two little things one must do - a regedit and a commandline command. First install Windows clean with the upgrade disc BUT during the install routine DO NOT type in the Product Key and DESELECT the Automatically activate when online checkbox. Once Windows is installed, do the regedit:...............
View 9 Replies View RelatedI did a new install with vista business. 'upgrade' . The reason for this was a new hard drive. I couldn't -then- see the point of installing xp then vista then start the long hard migration process. I was told of a work around, so I did. Now I'm getting 'activation' notices which when I try I get "this is an upgrade pack not a clean install" failed Now I have XP disks/codes here which are genuine -can I phone MS and would they allow me to quote a XP product key rather than having to go through the whole process again? All software legit and above board - can send pics to prove ;-)
View 4 Replies View RelatedI want to do a true clean re-install of Vista Ultimate, and wipe out all data on my hard drive (not a clean lite re-install). When I select drive D I'm told it's too small to use for the install. I'm unable to resize this drive.
View 5 Replies View RelatedI have some problems regarding a clean instalation of Vista x64. Some time ago my HDD has broken and I have bought a new one. So I have to instal Vista which I got when I was buying my laptop. It´s Asus n80, GeForce 9m series (not sure which one) 512mb, 4gb RAM, Intel 2.0 GHz Dual Core, not sure which motherboard but preaty sure it´s Gigabyte´s. So the problem is next;
I insert the Instalation CD in the DVD-ROM, I check the option, in BIOS for "boot from ´CD/DVD Drive´", the instalation beggins, I check the language, upgrade/custom (i choosed ´custom´), i accept the terms and then one of the following two happens:
1st. Starting Setup screen appears and then it freezes.. Actualy it doesen´t freeze, ´cause the "working cursor" is still moving but nothing happens.
2nd. Setup process beggins and when "expanding Windows files" beggins the setup just stops and this error code appears: Windows could not format a partition on disk 0. The error occurred while preparing the partition selected for installations. Error code: 0x80070057
I'm interested in upgrading my computer from Vista Premium to Vista Ultimate. Can someone be as so kind at to tell me how to do this? Also will I loose anything in the upgrade? I'm interested in purchasing the upgrade version from a best buy or something like that.
View 7 Replies View Related