I have a Texas Instruments Card Reader DRIVER:[ PCIxx12 Integrated FlashMedia Controller Driver (64-BIT)], but I cannot access SD CARDS. When I put my 2GB SD Card in it asks me to format, but when I try to format it, It says It cannot format, thus making the card useless.
View 9 RepliesI have been using an SD card in my laptop for portable storage for ~6 months. Suddenly, I have started getting an error message saying that "Disk is write protected." The tab on the SD card is in the unlock position. I have tried using the properties window to change it but their is no option to change it from Read Only or Change Permissions. If I click on a folder on the SD card and try to change it via the Properties Windows the window says that it is "Read Only" but when I uncheck "Read Only," it says I can't
because the disk is Read Only. And again I can't find any option to change
ownership or permissions.
This morning I was able to access my SD card for my camera with no problem. But then all of a sudden I went to download some pictures that I had taken afterwards and the computer doesn't recognize the card. When I unplug it from the reader it does the ejection sound but when I plug it in it gives an error sound (three small low grade beeps). I put the SD back in my camera and the pictures are still there. Why is Vista not recognizing the card all of a sudden?
View 9 Replies View RelatedI have been trying to format an SD card into FAT32 so that I can use it in my new Karaoke machine. When right clicking on the directory and choosing format, it show the FAT32 but does not complete when I click on it coming up with the error message 'cannot complete the format'. I have also tried this on my laptop which runs XP but the same message comes up. I have checked and the lock for writing is not on. Does anyone have any idea how to go about this. A friend said to use the compatability wizard to do this but on looking at this I still do not know what to do
View 4 Replies View RelatedI am using an HP a1700n with Vista Home Premium. I cannot for the life of me figure out why my SD card reader will not read any cards. All of my drivers are up-to-date (I believe... I'm not sure exactly which device I am looking for in device manager). I downloaded and installed what I was told might be a fix (Texas Instruments PCIxx 20), to no avail. I would hate to have to buy an external card reader when I have a 9-in-1 built-in... and assuming I did, if this is a Vista problem, no guarantee even that would work
View 8 Replies View RelatedI just installed a new MB (Biostar MCP6P M2+) and CPU AMD 64 x2 Brisbane 4200+ 2.2ghz. overclocked to 2.8ghz. and installed Vista x64 Premium OS. I was trying to import some pictures into Picasa from an SD card via a multi card reader on my Canon MP130 printer and the program froze. I shut it down. When I tried to use my multi card reader attached to the MB it wanted to format my disk??? is this because I am using a x64 system? After a few more attempts my entire system froze. I hard rebooted and when the POST comes up it only shows the CPU info and stops?
View 8 Replies View RelatedSince I have upgraded the PC to Vista, I cannot use anymore WinTV-HVR-1300 (PCI) (Same issue with PCTV Dual hybrid - PCI-Express). Vista simply hangs while booting, the last driver loaded is crcdisck.sys. If I remove the WinTV card Vista works perfectly. With WinXP all was working fine. I tried to remove all the cards from the PC... the issue happens when I insert the WinTV or the PCTV card... Of course I also tried to change some settings in the BIOS without success.
View 7 Replies View Relatedwhat is pci e. iam looking for new graphic card. and i saw pci-e. i have a ecs nettle mother board. HP and Compaq Desktop PCs*-* Motherboard Specifications, MCP61PM-HM (Nettle)* also. can i use a vid card that is more that 256 mb
View 9 Replies View RelatedI have a lot of misc. cds that a friend who passed away made. They are pics & music mostly. Some slide shows too but I can't get them to open anywhere.
I told his wife I'd go through them but impossible if my computer won't read them. I believe most of them were made on XP and I have Vista. Called Gateway but they didn't know. I tried a couple on an HP with XP and they all were read. Does anyone know if this is a Vista problem or is it my computer?
My warranty is up in May so I'm hoping if it's the computer I'll have time to get it fixed under warranty.
Another Vista Ultimate 32bit weird prob I have. Whenever I insert any disc be it CD/DVD, and I double-click on the DVD icon to open it, I keep getting "Prepare this disc" option to Live format the disc. The disc could be anything a closed session disc, a manufacturer disc, I keep getting this prob. So only two ways to go ahead.
1. I've DOpus - Directory Opus, an alternative to Windows Explorer in which I can Sometimes view the disc, though not always
2. The best way I've figured out is for me to simply click "Next" and wait for Windows to tell me that it cannot format my disc and then I can access the contents.
3. Auto-run registry fix doesnt cure it. (updated after flavirus replied)
Any Ideas why this is happening? I uninstalled the drivers of my drives, I've two, Sony DVD-writer SATA and Lite-on DVD-writer IDE. In WinXP I didn't have this prob with these drives, so i know this is a software issue.
I have an emachine w3619 with dual core 2160 intel, 1.5 gig ram and windows vista 32 bit home premium. Recently my cd/dvd drive stopped reading cds. When i went into device manager it said the device was functioning properly and the drivers were up to date. I uninstalled the cd/dvd rom drive and restarted that did not fix the problem either. I deleted the upper and lower filters through regedit as some people had mentioned this did not fix the problem for me. My cd/dvd rom shows up in "computer" but always acts as if the drive is empty. Anyone else had the same problem?
View 5 Replies View RelatedWhen I try to open a CD (*not* a CD-R or -RW) in Explorer, it often pops up a window asking how I want to format it. This is kind of silly for a non-writeable disc. If I click Cancel, it won't open the disc. Instead I have to let it try to format the disc and give up before it will open. A while back I called Dell support and was told to uninstall the CD drive and reboot. This fixed the problem once, but when I tried it again more recently it didn't help. I also tried turning on the Shell Hardware Detection service. That seemed to fix it for a while, but the problem has returned. Anybody have any ideas how to fix this? The system is running Home Premium and the drive is a PBDS CD/DVD burner. Autoplay is disabled. The dialog box that pops up is titled "Burn a Disc". It says "Prepare this blank disc", and has an edit box labeled "Disc title".
View 9 Replies View RelatedI have just added a 1.5 terra octet hard disk to my system and am unable to format it correctly. When I ask Vista Pro to do a straightforward format it blocks at 73% (roughly 1 terra). I have tried 3 times to get the same result so I thought that I would outsmart the system by making two partititions one of 976.56go and the second of 420.70go but although the first partition was accepted and formatted, the second format is blocked at 11%.
View 6 Replies View Relatedtried formatting a Memorex CD-RW disc this a.m. and after waiting, waiting, waiting got error msg that msw couldn't complete the format.
View 4 Replies View RelatedEvery time I open an email pdf attachment it cant be readed and it gives me the following message:this file does not have a program associated with it for performing this action. Create an association in the set association control pannel.
View 9 Replies View RelatedI have looked around this forum about CD problems, but no thread corresponds to my problem. I have Vista Ultimate x64. My DVD is TSST CDDVDW SH-223F ATA. I have a problem to read a contents of CDs. I can see DVDs, but CDs not. These CDs are originals from software producers and magazines. Under Win XP I have no problem to read all medias.
View 9 Replies View RelatedI have copied all my internet favourites folders in from Windows XP (IE7). I didn't use a password in XP and still don't in Vista.
Now, I can't organise or add-to any of the folders in Vista. It says they are read-only.
When I display the properties of the folders, they have a green square (mixed content) in the read-only tick-box. I switch it off and accept the prompt which says that it will apply to files and sub-folders.
But when I go to use them they are still read-only, and when I look at their properties, they are unchanged - still flagged with mixed content. And I still can't organise or add to them.
I have a computer that was just upgraded to Vista and I can't find the outlook express I've tried to use the windows mail but it wont let me see my mail either. Is there any way that I can get my outlook express back up to check my mail from work! I've searched my computer and can't find anything...
View 9 Replies View RelatedMy company has an Excel application we have developed and we use an Installer program to distribute it. The installer default is to install the program into a Program File that is named. This works flawlessly on xp but on any computer that has Vista installed, the file opens in Read Only, which defeats our entire application. The read only format can not be changed in any of the obvious ways (under Properties etc). This is a huge problem for us. Is there any way around it?
View 5 Replies View RelatedI'm messing around with this motherboard my dad had RMA'd to see if I can turn it into a usuable computer. Works fine but the one thing that's got me perplexed is the DVD drives plugged into it. The DVD writer seems to "read when it wants to", which is really weird. A lot of the time, it just won't read anything but sometimes it does read discs (I even burnt a disc using it). The drive is there in Windows Explorer and the BIOS also catches it but I can't get it to boot from the DVD drive (but it DID boot once so I managed to install Windows from it). In Windows I put discs in and it makes no attempt to read them...unless it suddenly WANTS to read them and then does. Does this make any sense? A drive almost literally reading discs when it feels like it wants to read them.
View 6 Replies View RelatedI recently solved the problem where my External HDD came up as a CD Drive but now it says the permission is read only,
View 7 Replies View RelatedI am running Windows XP media center edition and have just bought an upgrade DVD to Vista. I have 2 DVD players on my machine but neither of them run the DVD. The only file that appears visible is a readme file and that says "This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification."
When I boot from the DVD drive with the Vista DVD in it it starts the installation but the product key I have only allows for an upgrade and tells me I have to launch it from my current operating system. I am tearing my hair out at this stage.
I had a hp pavillion with XP and I put music and photos on a cd-r disc. Now I have a new hp pavillion wirth Vista on it. I can not read my cd-r disk on the vista computer. Actually its not one cd its many. They are still readable on the old computer. The new computer reads store bought cds and dvds. I have seen many people having this trouble but no solutrions.
View 8 Replies View Relatedjust installed Vista Home edition. I'm set up as administrator, but yet my Word and Excel files are appearing as Read Only. When I check the Properties, the read only box in the attribute is not checked.
View 8 Replies View RelatedIf i put any memory device in, it says i must format the disk before i can use it...but I have alot of information on them and its pointless to delete information that i want to see. If i click on the properties of the disk it says i have 0% unused information. I turned auto play off and even uninstalled ROXIO. With ROXIO deleted, the cd drive now says i must insert a disk but there is already one in there. The other drives still say the same as they did before ROXIO was deleted. This problem started off as the cd drive only messing up sometimes. Then it stopped working completely. Within a few weeks i couldnt use any of the drives. Ive tried many diagnostic tests and no luck.
View 6 Replies View RelatedI am running Windows XP media center edition and have just bought an upgrade DVD to Vista. I have 2 DVD players on my machine but neither of them run the DVD. The only file that appears visible is a readme file and that says "This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification."
When I boot from the DVD drive with the Vista DVD in it it starts the installation but the product key I have only allows for an upgrade and tells me I have to launch it from my current operating system. I am tearing my hair out at this stage.
I’m currently having issues with transferring from a USB HD. I have 70GB of video files across 10 seasons/folders on my usb hd. I’m able to copy all but about 8 files. The files are 350MB each. They all have the same format in the naming structure “[1x18] Episode Name”. I’ve tried copying them using XP (I get a cyclic redundancy check error), Vista Business and Vista Ultimate. I’ve tried copying them to a NAS, another HD, and My internal HD. I’ve tried opening as going save as, but always get the “cannot read from disk”. I can play the files with no problems. I’ve also defrag’d the drive. I’ve tried copy/cut. I’m also able to cut within the USB HD but not copy.
View 4 Replies View RelatedMy DVD/CD drive will not read any disc's, I just get a message saying insert a disc
View 4 Replies View RelatedIf my performance score on Vista for the memory of four gb's reads 5.9. How can it read it on windows 7 as 7.1
View 4 Replies View RelatedMade my first movie in WMM. This is my "Classroom video", where I am learning to use the software. Question: What video format would be best to burn to DVD+R for viewing on home theater or standard DVD players?
View 9 Replies View RelatedI want to format my c drive in windows vista, I went to disk management,and right click the drive but it is greyed out??.. I want to do a clean install of vista.
View 8 Replies View Related