I am having trouble booting up my computer. Vista SP1. My computer hangs occasionally during start up. And usually when i just turned it on, it gives a few long beeps and nothing happens on the screen. Could it be having problems with the CPU or my screen?
View 9 RepliesI am unable to send email. Using Vista. Have emptied outbox as suggested in other posts. Outbox was emptied without difficulty, sent to drafts, then deleted. Created new email - tried to send - still couldn't. Error message - unable to connect to smpt server. Have gone to tols - accounts - servers - re-entered info.
View 7 Replies View Relatedok lets try again.......my newsreader windows mail just suddenly stopped
working with "unable to connect to server"....i have deleted norton using
their program - no change.....i have deleted my news accounts and set them up
again - no change
this is bogus...for what i spent for freaking vista and a new computer to
have something stupid like this to have happen.
I brought a laptop of mine over to my gfs today and connected it to anexisting network that her roommate has setup. I have not had any luck getting it to connect either by wireless connection, connecting to an ethernet cable to a wireless router which goes to the modem, or connection to the ethernet cable which goes directly to the modem.
I had no problems with this laptop at my place connecting to wireless or wired and both places use comcast cable for internet.
I've been searching forums all day looking for clues. I have seen a lot of talk of MAC addresses, unable to contact your DHCP server, ip renewing etc. But nothing seems to work. It defaults to a 169.254.*ip which I believe means it cannot connect to the DHCP server.
I have been using a legal version of windows vista business with SP 1 and have installed all the recent updates. Just a few days ago some of the applications that I often use dont work any more. The applications are freecall ( a voip software ), Bit Comet and DC++ . I have searched many forums on all the above mentioned applications and also many Windows vista forums but still am not able to figure out what has gone wrong or why am unable to fix this issue. Some of the things that I have tried,
1) Tried system restore by restoring the system to a week earlier settings. This didnt work out.
2) uninstalled the firewall ( comodo ) I had on my comp. Disabled windows firewall . Even this didnt work.
3) I had VMWare installed and hence I thought that it had disturbed the network settings . So later i also uninstalled this VMWare application.
4) Then after reading some posts in other forums, I ran services.msc then disabled UpnP and SDSP . Even this didnt work out.
5) Now I have only my windows firewall turned on with exceptions to all the applications mentioned above.Even now it does not work out.
For the Dc++ thing, am unable to connect to the university Hub.
I am unable to connect to internet using my wireless. I have tried resetting the router and rebooting the laptop. Each time I try connecting to internet the system throws and error " the dependency service or group failed to start". I have tried using vista's diagonse and repair option, but no luck. I have tried restarting the wireless, troubleshooted drives. On doing the ipconfig /renew at the command prompt the following was seen. " No operation can be performed on wireless network connection while it has its media disconnected.No operation can be performed on bluetooth network connection while it has its media disconnected. An error occured while releasing interface loopback pseudo-interface1" On futher diagnoses i have notice that DHCP clinet service is stuck in the "STARTING" state. I am unable to stop and restart it. I have logged using the administrator.
View 9 Replies View RelatedWhen I try to connect an external USB hard drive or a USB memory stick to my laptop, Vista throws up a message saying: ???Windows needs to install driver software for your Unknown Device???. I let Vista search, but Vista cannot find the required driver. However, when I connect the same external USB hard drive or a USB memory stick to my desktop PC, also running Vista Ultimate, Vista has no problems recognizing the device and installing the required driver automatically and without throwing up any messages. I suspect that some Vista service(s) on my laptop might be disabled or not functioning properly, but I cannot find out which one could be the cause. Perhaps someone here could point me in the right direction.
View 9 Replies View RelatedI am unable to connect to any wireless network. When diagnosing why i cant connect, i am simply told 'you are unable to connect'. additionally, when directly connecting through a cable, I still cannot use internet, however my AOL instant messenger will work fine. I have tried restarting my computer and router with no success. All settings have been set to match my home network. I am lost as to what the problem could be.
View 9 Replies View Relatedave had a this acer lap top for 2 months.. using charter cable for internet access.. ethernet cable cannection.. 3 weeks ago stopped being able to to connect to the internet... charter says it is the computer.. i am able to user the wireless connection fine.. have taken the laptop to the electronics store and it connects to their lan good and surfs.. but at home it will not get a valid ip addresss. per the cable company, the problem is the computer.. also when connected i am not able to select private network in network and sharing..
View 8 Replies View RelatedI am testing Vista RC1 on my work laptop. I have to map several drives on my machine to the company SCO server in order to get some software to run. However, i am able to ping the SCO server but unable to connect to any of the network drives with my username and log on. I am also an administrator on this system, and cannot even map with the admin password.
View 5 Replies View RelatedI am having Windows Vista and Ubuntu. Ubuntu gets connected with LAN as soon as i plug in wire and also connects to the wireless network in my home ( via router ). But windows shows no sign of network connection. Could some guide me what should i do even to give you guys detail of technical problem since i am not a windows user but desires my laptop to be connected to internet !
View 7 Replies View RelatedI have an hp with vista hp 32bit and recently I am unable to connect to the Internet. My Internet icon has a red X over it and it says connection:unknown the dependency service or group failed to start. I have no idea why this is happening. I tried system restore but an errormessage says it's unable to restore. I ran the antivirus (norton 360) and 3 Trojans were found and destroyed. Still doesn't work. Ran the cmd prompt and tried the sfc /scannow fix and nothing was found. I'm flatout of ideas.
View 6 Replies View RelatedI'm running a visa 32 bit laptop and a Windows xp PC on a network and im trying to send files from the laptop to the PC. My laptop is unable to connect to the internet and I think the problem is that I have a virus so I'm just going to reformat the whole thing. I want to send my laptop files to my PC, but when I go to the network and sharing center on the laptop to turn public folder sharing on, the whole window just freezes when I apply the setting. The workgroup names are the same. Is there anything else that I have to do to be able to share the files?
View 9 Replies View RelatedI can't get the drivers to install on vista for my new motorola cell phone, so I can import music to the phone. I already tried going to motorola's website and downloaded a newer version of the software, it still doesnt work.
The phone will not connect to the computer. Its a motorola v3m phone from verizon wireless. Any one else seen this problem? have a fix?
This just started. Other symptoms:
Disk Manager: "unable to connect to virtual disk service"
Internet: "Connection Status Unknown, not enough storage is available to complete this operation"
Speakers: "The audio service is not running"
Quick Launch Toolbar: Cannot start Windows Explorer, but other apps ok.
Internet is up and running fine, can still get email and visit web pages.
Yesterday, tried to run VS C# Express for the first time, and could not open a project without getting a error message. So, I ran the following script usin subbinacl:
cd /d "%programfiles%Windows Resource KitsTools"
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%*.* /grant=administrators=f /grant=system=f
What's happening?
I just bought Windows Vista Home Basic to use on a MacBook, and created a partition using a program called BootCamp, which allows the use of Mac OS X as well as Windows XP or Vista. I installed Vista and was excited to use it but then I was unable to connect to the wireless router in my house. I'm not sure why, but the Mac OS X part of my computer is using the internet through the router, but the Windows Vista will not pick up the signal from the router. Does anyone have a similar problem or solution?
View 5 Replies View RelatedNow, I've seen that there have been a couple of posts up on the internet concerning this issue and it's frustrating to find that there is no solid answers out there. Hopefully we can get something moving from this thread. Recently I decided to move from Vista x32 to Vista x64 due to memory upgrade limitations. Upon loading up Vista x64 I discovered that while my media sharing worked just fine I was unable to setup my 360 to be an MCE.Upon researching all of the solutions posted out there and trying them all, I decided to do some controlled tests to see if I could replicate the issue. EACH series was conducted on FRESHLY loaded installations of Vista Ultimate and here's the results. Setup parameters
MCE: Xbox 360 Elite Edition
MCPC: Intel based Core 2 Duo System with 4GB RAM @ 3.00Ghz (DP35DP)
The base connectivity is a 3COM unmanaged 10/100 switch connected into a Cisco ASA 5505 which is bridged to QWEST DSL via a Cisco 678 DSL modem. All drops in the residence have been checked for interference and signal quality, all passing with flying colors. A Server 2008 based Active Directory Domain is present in this configuration with GPO enforced to the Computers via a link to the OU that contains all PC's. There is also an Exchange 2007 server present in this configuration. When each test is completed, the XBOX is wiped to factory defaults to ensure a fresh approach.....
I've been running Ultimate x64 and had occasional freezing problems. I'm pretty sure those are related to a memory issue. Normally I just have to hard reset the system and everything is fine. But yesterday I had a lock-up, hard reset and somehow the date was changed to 18 Apr, 2066. I obviously couldn't connect to the internet, so I reset the date to 2009 and restarted. No change.
My software subscriptions think they have expired, and I'm at a complete loss here. I require the internet and that software on that system for work and have no idea what to do. I believe as soon as I get the connection up, my subscriptions will talk to their online server friends and all will be fine (hopefully), so that's why this thread is here.
I'm having a problem with Vista's networking. A lot of my friends who still have XP are able to use remote desktop and tunneling services easily, where as I am unable to on my Vista machine. It's quite ironic cause I'd think Vista (newer than XP) would have better networking capabilities. But that aside, I've followed the instructions in order to install Tunneling on Vista (Since MS removed it from Vista) by going to programs and features and adding the telnet feature. This seemed to work somewhat, but now I'm trying to use SSH Tunnel Client to connect to a server and I'm unable to. Overall it seems Vista is locked up tight. Is there any information I can get in order to open up Vista in order to do what I want to do. I've looked at a lot of Q&A's, tutorials and how tos, but most of them explain very basic things. What steps do i need to take in order to connect to a server using SSH in Vista?
View 4 Replies View RelatedI have purchased a new wireless adsl router Aztech dsl605ew. I tried to connect wifi with my vista dell laptop but message shown that: Windows cannot connect to xxx. I used my other xp laptop to connect and I'm able to connect to the internet via wifi.
View 5 Replies View RelatedI just formatted my Computer because i had some problems, and after it, this problem appeared. Something like that appears for me on the Blue Screen: A problem has been detected and Windows has been shut down to prevent damage to your computer. DRIVER_IRQL_NOT_LESS_OR_EQUAL. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or softwre manufacturer for any Windows updates you might need. If the problem continues, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
View 6 Replies View Relatedi want to connect my pc to my tv using hdmi and also keep my desktop monitor using vga but be able to view both screens identically. my mobo is a gigabyte ga-73pvm-s2h and im using the onboard nvidia geforce7100 /nforce 630i graphics. at the moment the only way i can connect tv and monitor is by using the nvidia control panel but i cant set diferent resolutions for each screen and run them both identically so whichever screen i set as the main is fine but when i look at the second screen res is wrong.. is there a way to have both screens running simutaneously with different resolutions(my monitor is 15" and tv 32")or a setting in windows to allow this rather than having to change the main screen all the time?
View 9 Replies View RelatedAfter 'Optimize Soeed Up your PC' which supposes to be 'speed-up,' Vista, however when turned the PC/Vista backed on, only Blue Screen, thus I can NOT access Vista.
View 8 Replies View RelatedHad some issues with my mouse (USB device not recognized), and had an occasional time where computer would not respond after going into sleep mode and I'd have to hit the power button. Seemed to become more frequent, and then this. Only recent event was installing SP1 for Vista, but problem was already appearing prior to that.
I'm not able to boot the computer, getting the "carpet texture" on my screen and it freezes up, not able to finish booting. Ran dell diagnostics, indicated no hardware issue and no new hardware installed. I do have a blue tooth phone now, but have not syncd them up. Ran memory diagnostic tool, no memory issues..............
5zsJHA.248@TK2MSFTNGP06.phx.gbl> This problem has only occurred using Windows Movie Maker version 6.6. I have posted a query on that group, also. The bottom of the screen normally contains the"go"or"do it" button when "publishing" a movie. On my Samsung wide screen monitor that button is BELOW the bottom of my screen. I've tried different screen resolutions. how to make the screen smaller height wise? I have tried to adjust the vertical position of my monitor, but that adjustment only moves the screen a small amount. I am at the max resolution of 1068 x 1050. Other resolution choices seem to drive the bottom of the screen even further down.
View 4 Replies View RelatedMy set-up is very simple yet I cannot connect to a device. I have a Router which has three connections via ethernet.
1. Vista Machine
2. XP Machine
3. Music Server (systemline)
The problem I have is that my Vista machine will not connect to the music server - I cannot see the shared folders. My XP machine connects to it no problem, e.g. if I enter the location (
My new computer has Windows Vista, old computer had Win XP. I want to trnasfer all my data files from the XP machine to the Vista Machine. I konw about master and slave drives, whne I opened the Vista Machine, it has only two SATA connectors in the motherboard an one with the 40-pin? connector the ribbon goes to the DVD-ROM. can i connect my IDE drive to the motherboard using the DVD-ROM ribbon? should I set the XP drive as slave?
View 6 Replies View RelatedI am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
I know this is a Vista news group but I haven't been able to find a Windows 7 group so maybe one of you guys can answer my question. I have the power settings to never put computer or screen to sleep and there is no screen saver setup. When I leave my computer alone for awhile the screen goes black. This never happened with Vista when setup this way why is Windows 7 doing this?
View 9 Replies View RelatedSomething very odd happened today. I was as usual loading a large file ( 5.4gb ) in to Photoshop and as PS was doing it's business I noticed everything jumped over to my second monitor and the main monitor went blank. Moments later the image on the second monitor turned into a garbled fragmented mess before going into power save mode from which I couldn't get out of. Very strange.....Forced a warm boot. As the system had just been turned on so I can sort of rule out a heat issue - possibly & ram test OK. My workstation is mainly off line but two days ago I had to ftp something and I do remember vista installing an automatic update for windows update (without my permission) which I was very annoyed about, shame on you MS.....and after rebooting I saw a few reg. modifications come up on screen. Could this be the cause of this odd behavior. It's been fine since I had the warm boot - any ideas as to what's going on.
View 9 Replies View RelatedI've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.