Physical Dump Due To Hardware - Won't Start In Safe Mode
May 9, 2007
all of a sudden..it begins a "physical dump". The first time it did it. It said it was due to hardware. I went through my hardware list and it all appeared to be fine. Suddenly...it did it again. This time the message was just a bunch of numbers (I didn't write them down. but I'm sure it will happen again and I'll get it.) Long story short. I went to several friends and everything they tell me to do seems to be making things worse.
My computer won't start in safe mode, or normal mode..right now it will only start when I choose "The last configuration that worked". Even then...my computer will work fine for a week and then BOOM. acts strange for several days..off and on. I have no idea what's wrong with it. I've run so many programs that I don't know what I've tried and what I haven't.
View 14 Replies
ADVERTISEMENT
Feb 9, 2009
When my computer boots up, about 5 seconds after the desktop loads, my screen turns blue with the Physical Memory Dump Error
Stop: 0x0000008E (0xC0000005, 0xEDACCB75, 0xeB6E67F0, 0x0000000)
It boots up in safe mode fine, I have tried system restore and ran multiple virus/malware scans.
View 14 Replies
View Related
Jan 14, 2005
I'm wondering if anybody out there knows what this error is? My pc 'crashed' and told me: "Begining Dump Of Physical Memory" I'm running Windows 2000.I'll be much grateful for any 'right' reply.. since I have limited knowledge of computers.
View 9 Replies
View Related
Aug 15, 2010
well, I managed to screw up my winxp reinstall in a big way. I'm very upset over it since its my sis-in-laws computer. Before, she could not access the internet, but at least she could boot up WinXP and play games, access her email and all of her programs on the desktop...now...nothing but the following popup error message:
Error: One of the files containing the system registry data had to be recovered by use of a log or alternate copy. The recovery was successful
then the popup disappears and sends me to a blue screen (long) message starting with this:
A problem has been detected and windows bios has been shut down to prevent damage
View 5 Replies
View Related
May 11, 2006
Everytime I perfom a Spyware Scan on my daughters computer it reboots automaticly, with a short blue screen flashing up. And when I run a microsoft update scan the computer reboots in the same manner during that scan. Everytime the HD is getting scaned it reboots in the middle of it, with a short flash of a blue screen that talks about physical memory dump. Can somebody help me there. By the way I reformated the HD already and reloadet everything new on that HD, because it had the same problem before. Could it be the BIOS or a setting.
View 7 Replies
View Related
May 22, 2008
Over the past 48 hours my computer has begun to give me the following error:A problem has been detected and windows has been shut down to prevent damage to your computer.Driver_IRQL_NOT_LESS_OR_EQUAL.I have not installed any new programs in about two weeks.I have tried to fix this myself by running spyware scans (spybot and adaware) as well as AVG virus scans.All turned up nothing.I also run "clean-up" regularly to get rid of my temp internet files, etc and ran that as well.I also checked my hard disk for errors and had them automatically fixed.If there is any other information you need, please let me know and I will do my best to provide it asap.
View 7 Replies
View Related
Jan 13, 2007
I have an older somputer I use to Host Games online...seemed fine last few nite .however the last 2 oe 3 times I have started it...it takes forever to start and a screen appears saying sorry for any inconveinince but windows could not start..etc etc..gives options to start in Normal mode safe mode or last known good configuration..wich is what I tried after turning it off and back on again..still nothing..I can get it to start in safe mode....but it wont boot up in normal mode..just hangs at "Windows XP" screen...Its an older Pentium4 Dell Dimension4300.
View 6 Replies
View Related
Oct 24, 2007
I run Windows XP and keep finding that when I leave my PC unattended for more than 10 minutes I get a blue screen with a scary message regarding the dumping of physical memory. The error codes in the message are as follows:
stop 0X0000008E, 0XBA40721F, 0XEBC267C, 0X00000000, videoprt.sys - address BA40721F base at BA401000 Date Stamp41107d08
View 6 Replies
View Related
Jan 16, 2006
Everything will freeze, completeley and then it will go to a blue screen that says something like
HARD DRIVER ERROR:BEGINNING DUMP OF PHYSICAL MEMORY
which scares the living **** out of me, so I turn off the power manually from the power strip connected to my computer and switch it on again, sometimes, It'll start up and after it shows the Hardware and Window XPs loads, It goes to another blue screen that says HARD ERROR, instead of having me log in.
l0s71
View 4 Replies
View Related
Jun 13, 2005
I am a computer science/engineer major and I know somewhat a lot about computers, but this is my first time seeing this blue screen. My computer will start up to the compaq screen then goes to windows xp and then it flashes a blue screen for a split second. I was able to freeze it, but do not know how i did it, but it said something about a cretain system32 file is corrupt. there is a corrupt hive. complete physical memory dump complete. contact tech support or system administrator. right now, I am out of town and i have been reading about it and they say something about using a recovery console. I do not have my XP disk with me. I was wondering could I use anyone's XP disk and how do i fix this problem with no disk or using a XP disk?
View 10 Replies
View Related
Sep 18, 2006
My computer keeps crashing and the blue screen comes up, saying pyhsical memory dump technical info 0.0000008e (0.c0000005, 0.aa66dc02 0.aaza8az8,0.00000000)
View 1 Replies
View Related
Feb 26, 2008
when my PC boots it up it goes to a black screen giving options such as safe mode etc. All of these options end up with the computer going to a bluescreen and the following message: STOP: c0000218 (Registry File Failure) The registry cannot load the hive (file): SystemRootSystem32ConfigSOFTWARE It is corrupt, absent, or not writable. Beginning dump of physical memory Physical memory dump complete. have no disks at all with laptop. And my knowldge goes as far as being able to use the internet.
View 3 Replies
View Related
Mar 1, 2005
this is the best way I know to explain all of this. I am running a 3 yr old Gateway with Windows xp and Sp 1 & 2. I have always stayed up to date with my Windows updates deleting cookies, defrags and so on. I am running Avast anti virus and Armor 2 Net firewall. I have noticed over a period of about a mth that my system has been getting pretty slow to boot up and load up web pages. Now I am having to manually start my PC and I have to do it in safe mode F8 and click on debugging mode. If I don't do it this way then everything loads up and then my PC just turns itself off. I have PC doctor and I have done a complete diagnostic test and I have gone to antivirus.com and did a virus scan there as well as with my Avast. I am thinking that I may have to totally take everything out and reinstall everything back in. The only thing is -is that I don't know what to type in to get the whole thing going. Also I have been getting a message but only sometimes that says RTL cannot locate HPOIPMO7.exe (HPOIMO7.exe) I haven't a clue what this is. Might it have anything to do with what is going on. I don't mean to write a book here but there is one other thing, the other day I had a window pop up that said that windows needed me to reinstall my xp software and when I tried it said that the version that I was already running was newer than the cd software I was trying to install and wouldn't accept it.
View 7 Replies
View Related
Sep 17, 2009
An infinite loop it seems. i was trying to start my pc in safe mode, to delete a .exe file from C:WindowsSystem32 which was suggested by a post to fix the "windows not genuine problem". To be able to do that, i ran msconfig and selected /safeboot under BOOT.INI tab. now everytime i try to reboot my pc it asks me to select an operating system (windows xp pro/microsft windows) if i select windows xp then it asks me to select a startup mode (safe/normal/last successful) and then no matter what i select it will reboot it self, and do the same again. If i select microsoft windows (instead of xp) then it shows MS Windows 98 screen and then goes into DOS prompt. from what i have read in some of the threads is that, i have a virus which is preventing my pc to boot in to safe mode, and because i have selected /safeboot from msconfig windows will only boot in safe mode, meaning i am stuck. the workaround these threads were suggesting was to find the boot.ini file and rename it to something else, which would fix the problem, because this file holds the info about in which mode your pc should boot. i tried to rename this file from command prompt (i cant get into windows, thats why), using "ren c:oot.ini boot.ini" but it says file name invalid. i think this is because its a hidden file. then i tried "attrib -h boot.ini", but it says attrib cannot be used in DOS mode.
View 10 Replies
View Related
Oct 13, 2009
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
View 11 Replies
View Related
Jun 7, 2010
Computer restarts before login screen unless I interupt boot to choose debugging mode (or set it using msconfig). I've disabled everything in msconfig with no change. I've removed all hardward except the minimum. No change. The error I get if I prevent auto restart during boot is a "Multiple_IRP_Complete_Requests) error. This problem started without anything being installed or removed. If I go in to the BIOS and disable ANY devices (i.e. sound), then the Debugging mode trick to get the computer started doesn't work which seems backwards.
View 5 Replies
View Related
Dec 14, 2006
I recieved the following message after a forced restart after windows updates were installed: "We are sorry for any inconvenience but Windows was unable to start successfully" My options are to start in Safe Mode , Last known config or normal. Safe Mode is the only thing that works. Also System Restore would not work Also System Recovery from Sony Vaio Recovery Wizard would not work
View 8 Replies
View Related
Mar 6, 2008
It never would start windows normal but would in safe mode,so now i did a diskcheck and restarted now it gets hung up on the system32driversagp440.sys...at least thats the last one that pops up before it freezes.
View 4 Replies
View Related
Jul 15, 2010
stop working was a Microsoft update error or i deleted something wrong using regseeker. I had to install another system but i want to use my old windows media version. Every time i try to use my old system it automatically boots on safe mode. I press F8 on when i'm booting up and press run windows normally but it still runs in safe mode. I can't do anything. I tried checking the disk for errors and nothing helped. I tried too restore my system right after the system failure but for some reason there were no restore points. I took some screen shots of the 1st few system and application errors shown in the event viewer.
View 4 Replies
View Related
Dec 19, 2005
I have been trying to get a game to run on my computer, while attempting to do this I stupidly shutdown some tasks and then my computer shutdown. When I tried to restart it, I got a screen to say do I want to start in safe mode or normally or whatever. If I want to start in safemode it tells me to use the arrow keys but when I attempt to use them they don't work. It does a bit of a countdown and then trys to start in normal windows mode but it can't.
View 3 Replies
View Related
Sep 5, 2007
I woke up this morning and my pc won't start. It just keeps rebooting and taking me to the safe mode startup menu. I tried starting normally and it just reboots. I have been able to start in safe mode with networking as well as just safe mode.
View 4 Replies
View Related
Sep 29, 2007
My laptop is not working at all It's a Dell with windows xp When you switch it on, the start button doesn't work, and neither do any of the desktop icons Only the task manager works nothing else. And also, how do you start a computer in safe mode, And will that help
View 3 Replies
View Related
Oct 25, 2006
My computer, when started up in normal mode, just goes to a blank red screen....no icons, no nothing. The only way you can get anything to work in normal mode is by way of the task manager. In safe mode, however, I have access to everything except for sound. I have gone through the Microsoft website and ran all of the virus tests and scans. They say they find things and that they have removed them, but after restarting, it's the same old thing!! I'm pretty sure it's some sort of virus
View 4 Replies
View Related
Feb 14, 2005
I know a bit about computers but i ain't the best an ain't bragging. But i know a problem when i have one. I wanted to get into safe mode in windows but cant. I press f8 then select my operating system then the drivers start to load windows in safe mode. The problem i get is it hangs on one driver, so I'm thinking this driver could be missing or is corrupt. I have run chkdsk an have use the options to fix all errors but windows still wont start in safe mode. I checked for Virus and Spy-ware but still no joy. Also if this driver is missing or corrupt i cant replace it because i cant get into safe mode. I have also tried the sfc /scannow in cmd but keep getting the message please insert windows xp disk in CD drive D:
View 2 Replies
View Related
Nov 10, 2008
I got this message in the dreadful blue page this morning when starting my laptop (Acer), running WinXP Home. It does not respond when trying to start (F8) in safe mode etc. What should I do? I am not really tech-savy..I also cannot explain why this thing happened. Is this a virus/malware? it happened after i connected an external hard disk of a friend to my laptop last night. My girlfreind's laptop had exaclty the same thing when restarting last night...both laptops with the same error message above.
View 1 Replies
View Related
Oct 8, 2005
The problem is that windows freezes on a blank screen after the Loading windows screen. There were about 10 viruses on the computer, they have since been removed remotely. They included trojans, spyware and adware, and also W32.Conycspa.G@mm. However the computer can still only be booted in safe mode.
View 8 Replies
View Related
Aug 28, 2008
Right now I'm trying to fix a computer that recently became effected with the "Anitvirus XP 2008" virus. Its gotten so bad that we can't get onto the desktop, and when we press "f8" to start safe mode, the option will come up, but when we click "start in safe mode" the computer restarts itself. It's done this every time. I was digging around on the internet and I found something that said that I have to make a bootable cd. Is this right?
View 5 Replies
View Related
Aug 17, 2005
This all started in the "98 Forum" I had 98 and would only start in Safe Mode. I seemed to have fixed that. Then I tried to install XP. I unistalled the whole Battery Scope deal from Safe Mode. Then I restarted. It started in Normal Mode and stated it was going to re-install the Battery Scope. Then it worked just fine.
Then I started getting cute. Instead of leaving it as is, I tried to install windows XP:I have got past the part with the Serial Number and I am now at the actual installation. It has completed "Collecting Information," "Dynamic Update," and "Preparing Installation."
View 11 Replies
View Related
May 11, 2005
i am working on a friends computer .she installed a program and all was ok after that . she turned off the computer and went on holiday for a week . came back started the computer and received an error message
"Windows cannot start " if windows doesnt start normally . windows will restart " a mesage similiar tothis ..and she receives the same message everytime .. ( she isnt available ATM for me to get hte exact error msg ) i have tried to get into safe mode to remove this program . but safe mode isnt available . i have tried F5 on start up . and safe mode isnt in the options ..& the same with F8 no option to enter windows in safe mode . what would anyone suggest to try next ?
View 5 Replies
View Related
Dec 11, 2008
I've tried several times to start in safe mode on XP. All of the guides I've referenced say F8 is the key. However, when I boot, the only functions I see on the screen that only lingers for a moment are F10 and esc.I've tried the tapping method also. Nothing.I'm talking about an hp notebook
View 4 Replies
View Related
Nov 10, 2005
A guy in the office was transferring images from his digital camera to his PC when the screen froze. He now can't start up his OS unless in safe mode. I've tried "last known good configuration", used an old restore point, checked for clashes in Device Manager, done a diagnostic startup using msconfig and still no joy. The machine is out of warranty and we can't find the recovery disks anywhere. Also, because the software was preinstalled there's no original disc to do an XP repair job on it. What more can I try?
View 3 Replies
View Related
