While switching from V&S to XP forum, my Welcome to beach & log out have disappeared. I assume I'm still logged in as I can post this message. Have tried "reload" button & going "home" & returning & still not there.Only "tech republic: 10 things..."there. or perhaps a temporary glitch as log in area under repair (which I wasn't aware of)?
View 3 RepliesMy WinXP SP2 computer restarts its self just as it logs in to any account.
I woke up to find my computer had an error on it. It had been on all night and connected to the internet (if that helps you understand the situation). The error was something like this:
Explorer.exe - Application Error
The instruction at "0x0105b1fe" referenced memory at "0x000000000". The memory could not be "read". Click on OK to terminate the program.
and 'Explorer.exe' was something else a couple times (if I saw it I would remember)
I kept clicking 'OK' and It would keep appearing, then the start menu and taskbar would disappear and appear. The warning kept appearing. I restarted properly and then the computer would keep restarting after "Windows is starting up...".
I tried going into Safe Mode and Safe Mode in Command Prompt and still restarts when I get to logging in.
I thought if I got to MS-DOS, I could launch System Restore and go back to a previous state, but it's easier said then done.
I have tried to boot from a Win98 CD, but I couldn't locate the C:WINDOWS directory.
I've tried to boot from a Office 2000 Pro CD that had Word, Excel, and Outlook. I could brouse around the CD in Command Prompt, but that didn't help much.
Now, I'm onto booting from an WinXP upgrade CD. I've tried reinstall Windows, and when Windows Installation is just about done, the computer restarts and I had to restart all again. When I start up now, it is WinXP without Service Pack 2.
In Microsoft Windows XP Recovery Console, I have tried to open System Restore ("C:WINDOWSSystem32Restore
strui.exe"), but I just get 'The command is not recognized. Type HELP for a list of supported commands.'
Does anyone know how to open System Restore in Microsoft Windows XP Recovery Console? Or even if is possible. Am I even on the right path?
Can anyone give me any hints as to WHY this error happened and what to do now to get my pc started properly?
I also have my all my files on a partitioncalled D: and I am willing to try to reinstall Win2K again and upgrade to XP. One more question is if I format or reinstall on the C: drive, will it effect the D: partition?
Hibernate and Standby were working fine on the machine. But since about a week. Both the Standby and Hibernate feature are not working. The detailed explanation is given below. I have three account profiles all set to admin. The computer does go on standby or hibernate when on the welcome screen but only if no one is logged on. If I have logged on, and then i select standby or hibernate nothing happens. After this if i try to shut down the computer it kind of hangs halfway through the shutdown process. It seems that it is trying to hibernate and shutdown at the same time.
If I have not requested for a hibernate or standby, and then try to shutdown the computer. It shuts down properly. if I log-off to the welcome screen and no other account is logged on then also the hibernate and standby work fine. I have tried to run system restore, but when it boots up in the restore process, i get a message that no changes have been made try another restore point... i have tried many points but it does not work.... am totally confused. I have also reinstalled the patch on the Microsoft website for XP where a machine with more than 2Gb of ram needs to hibernate.
Article 871211 is titled "How to check if you are logged in as an administrator and if a group policy is in place for your computer". When clicking on the link to the article, a message appears stating "The article you requested is currently not availble". Been trying for three days.Does anyone have this article or can shed some light on how to check if you are logged in as an administrator? Need to be able to do this in a script.
View 7 Replies View RelatedComputer I have came with Windows XP pro. It had one account available called Administrator. I wanted to change this and found it would not let me change the name. So I opened another account (with my name) and gave it administrator privileges. As far as I know, you can have more than one administrator account. Every thing seemed OK until I logged out. When I came to log back in, only one account (this time mine) was available.Problem is that there seems no way to get back in to the Administrator account. Since most of the files went to that account when I used the files and settings wizard, it effectively stops me using the files.
View 6 Replies View RelatedOk I think a family member has been logging onto my PC without my permission. I have put password access into my PC but I think they have somehow gotten around it. So I changed my password BUT is there any software that can tell me what date and time someone logged onto my system?
View 7 Replies View RelatedIs there a way to enable control alt delete while logged in but switched user?
View 14 Replies View RelatedThis tweak gives a user the opportunity to use it for good or bad. It enables the user to re-password any account without having to know the existing password and also shows you every account that exists on the machine (even the ones that are hidden). This is a good tool to use if you forgot a password to say your administrator account and you needed to be logged into the admin account for any reason.To view all of the user accounts:1) While logged onto the computer, click on Start>Run>and type in CMD. 2) From the command prompt window, type in net users. This will show you every account that is made onto the computer whether it is hidden or not.To change an account password:1) While logged onto the computer to an account that has administrative rights, click on Start>Run>and type in CMD.
2) Type in net user then the name of the account then * and press enter. heres an example: net user administrator * or net user "Joe Smith" * . Put the name in quotes if it contains spaces.3) From there it should ask for a new password. Type in your new password (type very carefully - the command window won't display what you type) and once more to confirm it.
I have found out that I have a corrupted user account. I have created a new account and am trying to now delete corrupted account but I can't as it always stays logged on. When I start the computer it goes straight to the corrupted account and will only let me switch users.
View 6 Replies View RelatedI contacted Nero about the lightscribe icon not showing up in Nero Ultra 7 and these are the directions they sent me....where do you find local securitypolicy in Windows XP home edition??? How can I find the "Devices: Restrict CD-ROM access to locally logged-on user only". they have listed? Double-click on the entry "Devices: Restrict CD-ROM access to locally logged-on user only". Choose the option "Disabled". Confirm this change by clicking on "Apply and "OK".
View 4 Replies View RelatedEven though I'm logged in as adminon my PC (Windows 2000), I can't change anything andhave no access to the controll panel. I need to change the date and time on my PC, it's stuck on December 2002. I also can't change or delete any wallpaper, no access. I've had this problem for a while, postet it here and didn't get help, haven't been able to solve it, yesterday my PC finally blue screened with a STOP error. I booted from CD and re-installed Windows 2000, so I could at least gain access, but I need help with these issues,
View 12 Replies View RelatedMy laptop has begun flashing a blue error screen prior to restarting at random. This is not following any hardware or new driver installation; the only software I have installed recently is Bloodshed Dev C++.I had a hard drive failure on this same laptop about 6 months ago; since then I installed a new hard drive, reinstalled XP Pro, all drivers and programs, and it has run without a hitch since then for the duration of the last 6 months...until today.I disabled automatic restarts and the blue screen error It looks to me like a driver error, but I have not updated or installed any new drivers or devices recently. I was hoping to avoid reinstallation of all drivers- could any of you point me towards a more specific fix? I'm not aware of what "w22n51.sys" is for, or the most obvious source for repair.
View 1 Replies View RelatedIn attempting to flash ugrage my bios, I received the above message. Prior to attempting the flash upgrade, I disabled all anti-spywares, anti-virus and the firewall.Previous bios upgrades qere done without a glitch.I tried going into system/advanced/DEP and allow the *exe but without success.I am running XP-SP2 on a Dell Inspiron E1705 Avast, Spybot S&D, Adaware SE Personal, Comodo Personal Firewall, all disabled. I am the Admin and the system owner.
View 7 Replies View RelatedI just purchased a new Media Center PC running MCE 2005. Circuit City installed Norton Internet Security program.Currently, it says that Supervisor is logged on/Parental Control is OFF. I am currently the only user, but I would like to setup at least 2 other users. I have setup a Passport, but I have not set a password for my user account. I am confused on whether I need to setup the password in Norton Security or in Windows User Accounts where I setup my passport account? I understand that I can have Norton control user accounts or Windows control user account. Which one am I likely to have the least problems with? If I
select Windows to manage the user accounts, do I setup my user accounts with passwords before I run Norton to assign account types to user accounts? There does not seem to be a forum for Norton Internet Security that I can post too?
Since this is a very new PC, I want to make sure I do not do anything wrong. I have read the info on how to setup Norton Security, but I am still confused on where I log on and off (Norton has a log on/off option) and where I setup the accounts first. Since I have not setup what account
manager I am going to use I am not sure that Norton is configured properly.
I lose internet connectivity after a variable period of time of being logged into my computer. I can actually ping and do tracerts to verify that I can "see" the internet. But, my any other methods of accessing the internet do not work! I can't surf using a web-browser, my IM clients do not work, and I can't play any of the online games. I can still share files with computers on my local network.
View 2 Replies View Relatedi shut down my Pc normally at my work and when i started today morning and put my user name and login , a windows apears with the following message. WINDOWS CANNOT LOAD THE USER'S PROFILE BUT HAS LOGGED ON WITH THE DEFAULT PROFILE FOR THE SYSTEM DETAIL- THE SYSTEN CANNOT FINE THE PATH SPECIFIED how can i get my profile back to work normally as before.
View 2 Replies View Related