I have a Dell 1100 Inspirion laptop & can't use it, an error states that I have a bad image & winsrv.dll is not valid. It also advised me to check my installation disk. I have Windows XP Home Edition. Can you help me boot my windows so I can try to fix the problem. All I have is a blue screen with the error messages everytime I tried to turn on my laptop.
View 12 RepliesSo two days ago my computer suddenly decides that when I arrive back home it would want to start running like a win 95. Thus, I promted to shut it down. Once it arrived to the loading screen after the reboot nothing occurred. I then decided to wait... 30mins later it goes black and then the message arrives: "Winlogon.exe-Badimage The Application or DLL C:/Windows/System32/sfc.dll is not a valid windows image. Please check this against your installation disk settings." I have alot of stuff on my computer I need for work, is the only option to deleted everything and re add XP?
View 8 Replies View RelatedWhen right clicking my windows XP desktop and selecting properties I get the following error:"Rundll32.exe - bad image" The application or DLL C:windowssystem32 hemeui.dll is not a valid windows image. Please check this against your installation diskette."This error began occcuring after installing new video drivers for my 128 DDR ATI Radeon 9700 TX video card. I have tried uninstalling and reinstalling the drivers, and returning to an older set of drivers. No luck. While in safe mode I get the same error.On a potentially related note, attempting to access system performance settings from system properties also gives the same error.Otherwise everything else on my system appears to be working perfectly fine.
View 11 Replies View RelatedThe machine is a Dell Dimension 2350 wiith 512 ram, XP Home. The full error message is "The application or DLL C:Windowssystem32DNSAPI.dll not a valid Windows image. Please check this against your installation diskette." I ran a windows install and selected repair. This got the system booted up. I then loaded Avast A/V and removed many viruses. then I downloaded windows updates, after I installed SP 2 and the system reboots the error message above comes back and windows is stuck at a black screen. Is it possible to copy the DLL using repair console and if so where to find DNSAPI.dll?
View 3 Replies View RelatedI just installed an HP Deskjet 5740. I could not find the install disk, so I installed the drivers and software through the HP Support Website. Now I am receiving an error box that will NOT close. It reads the following: hpcmpmgr.exe - Bad Image. The application or DLL c:WINDOWSsystem32msxml4.dll is not a valid Windows image. Please check this against your installation diskette. I tried to run the HP software updates but that would not work.
View 4 Replies View RelatedI keep getting the following message: The application or DLL E:WINDOWSsystem32SHFOLDER.dll is not a valid Windows image. Please check this against your installation diskette. I also keep getting the following message: The application or DLL E:WINDOWS system32WSOCK32.dll is not a valid Windows image. Please check this against your installation diskette.
View 1 Replies View Relatedwhats the best way to replace the native Win XP boot gui screen with my own graphic message display when XP Boots?
View 3 Replies View RelatedI got a pretty serious problem i just got done reformating tonight and i goto get service pack 2 and i install it it says restart when its doen so i do and i get You receive a "Stop: c0000135" and "winsrv was not found" error message everytime i try to boot up ive tried last known good config and safe mode all of them come up with the same message the only thing i havent tried is chkdsk but i dont think that will do anything.
View 1 Replies View RelatedI was wondering if there is a good way to store a disk image of a hard drive either within that drive or on a server and have it overwrite the booting drive on every boot? I work at schools with computer labs and sometimes the kids mess up the computers and we have to run a Ghost Multicast session to wipe the drive. But everyone has been asking me for a way to wipe the computers clean on each boot? File loss is not an issue, as kids save their work to thumbdrives and network shared folders.
View 5 Replies View RelatedI've been assigned to go through the computers in my school lab and delete (or turn off) the images that some students have set to flash on for a few seconds at start up. What would be the best way to do this?
View 3 Replies View RelatedI am trying to help a friend with their laptop. It is a fairly new Dell laptop (about 2 years old) running Windows XP. They don't know if one of there kids downloaded something with a virus or what caused the issue. I have never dealt with this sort of issue before. When trying to boot the computer, one receives the following error after the Windows XP splash screen: "The application or DLL C:WINDOWSsystem32DNsapI.dll is not a valid Windows Image. Please check this against your installation diskette."
View 11 Replies View RelatedI currently have 2 x 250GB hard drives; the first with XP and Vista on separate partitions, and the second for data/media. Is it safe to restore an OS disk image without removing the partitions i.e. restoring an XP disk image back to its original partition whilst keeping the Vista partition intact. I'm trying to find a safe/efficient way of backing up my OS's by saving disk images to an external hard drive, so if something goes wrong, ie doesn't boot, I can restore an image via the other OS.
View 1 Replies View RelatedI have been in the recovery console, I have tried making a winpe boot disk "Failed due to errors" tried fixing the MBR, even tried to connect to it remote with regedit to make some changes in the registry with out success. I have even installed another copy of win xp on another drive and booted the system up with the 250gig in it and changed the drive letter in there. After taking the one drive out and booting with the 250gig it still has a letter of "C:" and still the same login loop.
View 9 Replies View RelatedI recently purchased a 160 GB SimpleTech SimpleDrive (external-USB) for backup purposes. The enclosed software StorageSync (Pro) did a satisfactory job of backing up, although a little slow (1 hr - 40 min for 11.5 GB, no compression).
Neither the on-line manual or website gives information whether a restore is possible from a catastrophic-type incident of the O/S, requiring restoration from a bootup procedure. There's no instruction about preparing a "Recovery CD." I have Ghost 9.0; would this be more advisable to backup the image file; and would Ghost see the external HD from its Recovery CD?
I am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
View 14 Replies View RelatedAfter browsing through many of the threads here I have decided to post my own as I am unable to come to any conclusions. MSI, Pentium 4 1.9GHz, 2x60 GB HD (Maxtor ???), 2x256MD DDR-266, It won't boot at all - none of the F8 boot options work, which I have tried several times after recieving the following error
View 10 Replies View Relatedworking on a dell dimension 4600 with the product key reading "Windows XP Professional 1-2CPU" i am re-installing widows xp pro on there and its saying the product key is not valid.
View 13 Replies View RelatedIt pops up when I try to start different programs. Games, movies, whatever.
View 1 Replies View RelatedI have a Dell 8400, XP Home Edition SP 2 that came pre-installed. I purchased a retail XP Pro SP2 upgrade. It won't install. I get the message: The pid is not valid for this version of Windows XP. Provide the pid that came with the Windows XP upgrade CD. I know its not from the Product Key I'm giving it being invalid, because when I intentionally type it in wrong, I get another kind of error message about a bad PID. Also, I purchased the retail from a large office supply chain. So, why can't I use a retail upgrade XP Pro on top of a OEM XP home?
View 3 Replies View RelatedI am trying to install windows and it says that certain files are "not vaid windows xp file image", or some nonsense like that. I click retry it will continue. I get to the actual windows installation screen and it comes up with some fatal error, its different every time.I am using a real genuine copy of xp sp2.
View 9 Replies View RelatedI downloaded it ran it and rebooted but I am still having the same issue. I am trying to install a program and still get This is not a valid win32 application. All the EXE Icons look like the old MS Dos Icon's. I am currently scanning the machine but am most of the way through and no viruses have been found.
View 4 Replies View RelatedThis is my first post so I'm likely to appear stupid. I'm of average computer competence but love the things. Short story is this:I have an accounting program in which I have data files for each year of my business. These have been successfully backed up for years on CD and now JumpDrive, and stored on the desktop with a shortcut for easy access.I downloaded and installed SP2. Now when trying to open a file, I get the message C:XXXXXXXXX is not a valid Win32 application. It always was before so what changed?I cannot back up my current files because that is the name I've always used. The computer doesn't recognize the name as valid so I have no security. An ancillary problem is that years ago, my adorable husband somehow associated my old data file to be opened with MusicMatch. (We don't even discuss this.) I managed a workaround so that I got the files to open with their program application even though I could never change the icon from MusciMatch. No harm no foul. No longer. Post SP2, the danged thing went back to opening MusicMatch, ignoring my old workaround. Messing with it for hours got it to where I'm now getting the invalid file messagel.
View 3 Replies View RelatedError comes up saying that D: is not a valid win32 application .
View 1 Replies View RelatedI cannot access the C drive, get the above error message. Also, when doing a right click "OPEN" and "EXPLORE" are not written correcly, I can only see some weird characters. Could it be a virus?
View 8 Replies View RelatedTrying to open the command prompt in XP and all I get is "c:windowssystem32cmd.exe is not a valid win32 application".
View 14 Replies View RelatedI have moved my lexmark x1100 all in one to another pc I am now getting the message 'the handle is invalid ' what does this mean and how do I fix it?
View 6 Replies View RelatedIf I have a Windows XP Pro CD in English with a valid key, and that I change my CD for a Windows XP Pro French CD, will the key still be valid?
View 7 Replies View RelatedWhen trying to install XP over 2000 I get the following error.no valid system partitions were found etc.Can someone tell me how to fix this.
View 14 Replies View RelatedThis is Bhaskar and I am very new to this website, Can anyone help me with the following problem? I have XP Operating System, FAT32 file system and when ever I load my PC, it will scan the C drive and stops at this particular file called " pagefile.sys first allocation unit is not valid. The entry will be truncated.39 percent completed." and nothing happens later :-(
View 14 Replies View RelatedThis just started to happen to me yesterday after an update was installed automatically from Microsoft.
View 9 Replies View RelatedI'm trying to run Regedit. I type REGEDIT and I get an error message saying "Regedit is not a valid Win32 application"It runs msconfig and sfc /scannow but not regedit. It did before. The only thing I have done differently is install more ram today.
View 4 Replies View Related