Basically the thread title explanes it all, I am building a new computer and wondering if i can have vista 64 bit and xp 32bit on the same HDD in a dual boot format.I am no computer noob, I am in training to be a network manager and deal with a server 2003 and open SUSE Linux dual boot system at school.
View 1 RepliesI just bought this pc and build it myself and was wondering one thing.SPECS:AN8 SLI
AMD 64 4000+ @ 2.4 OCZ Performance 2GB DDR 400 (PC 3200) EVGA 7800 GTX Sound Blaster Audigy ZS Platium Maxtor MaXLine III 7L300S0 300GB 7200 RPM 16MB Cache Serial ATA150 SeaSonic S12-600 ATX12V 600W
I was running a dual boot of windows XP and Ubuntu Linux prior to installing Vista beta 2. Now, after upgrading windows XP to vista beta 2 i no longer have the boot screen that allows me to chose between my linux boot and my vista. Any way i can get back into linux? I did not make a boot disc for linux.
View 6 Replies View RelatedI just had a new system built last week and loaded XP x64 as my operating system. I am seeing a huge decrease in my framerate while gaming and was told on another forum that XP x64 is probably the culprit. I thought that going 64 bit would be an improvement over 32
View 3 Replies View RelatedSo i'm upgrading my dad's computer right.For some reason I thought he had 2x1gb modules in it already and he was complaining about it being slow. I know its full of spyware and what not, so I went and bought another 2gb kit and brought win xp 64 w/ me.I go and and wipeout the machine, install xp 64 and boot it up. I then realize that this machine only had 512MB in it. I open it up (yah I know should have checked first) and see that his MB only has 2 slots in it. So I end up pulling out the 512 dimm and installing the 2 1gb modules.My question is now, is should I leave him be... or is it actually better for him to run win xp 32 bit edition seeing as we only have 2GB ram.His cpu btw is a pentium D dual core 2.66 GHz, which is 64 bit processor.
View 3 Replies View RelatedCan I install the 32bit version of Windows XP Pro on a system with the following specs?Processor: Intel Core 2 Duo E6600 Socket 775 2.4GHz RAM: 2GB DDR Hard drive: 1x500GB SATA2 Graphics: XFX GeForce 7900GS 256MB DDR3 PCIE Dual DVI 450/1.32
Motherboard: ASRock S775 VIA PT880 Ultra ATX Audio Lan Sound: onboard (for now)
I am using Pentium 3 system with Window XP Professional. I need to know that whether my operating system is Winddows XP 32bit or 64bit? How can I know about it?
View 4 Replies View RelatedI'm trying to make a dual boot system Vista/XP with my HP Media Center purchased in 2007 with Vista pre-installed. Inside Vista I created the partition for XP (disk D and rebooted with the 'XP Pro SP2' inside. After selecting its correct partition for installing it copies all files on hard disk and it reboots in order to start its installation, upon rebooting and starting first time from hard disk, it says that there is an error in the system and stops. If I install only XP on the system it works correctly even though some newest hardware is not recognized. I had already made a dual boot two years ago with a 2007 XP Student Edition and it smoothly. If it is due to the XP version being too old that maybe cannot deal with the boot record created by Vista
Or perhaps such an old XP cannot recognize a boot hard disk that is not C:?
Is there a way to bypass this point (perhaps fixing the boot record) in order to continue correctly the installation?
Thank you,
Al
I originally had Vista Business edition on my laptop and decided to dual boot with XP. So far I created a partition on the same drive (C: ) as Vista and installed XP on it. how do I choose between Vista and XP when my computer boots up? When I turn on my computer it boots straight into XP and doesn't show that menu where it gives me a choice of which OS I want to boot
View 1 Replies View RelatedCan i put Vista on a computer as a second operating system and dual boot with XP? Is there a risk of Vista interfering with the XP partition
View 2 Replies View RelatedIs it possible to have a Vista based system and then load XP on the same system and switch between the two. I know mac's have something similar to this but i have an HP dv7 pavilion notebook with an AMD Turion x2 Dual-core mobile RM-70 2ghz processor, 4 gb of ram, ATI Radeon HD 3200 graphics chip set, and 156GB of free harddrive space
View 7 Replies View Relatedjust ordered a new pc that is on its way pre loaded with WIN XP PRO SP2. It also come with a free VISTA BUSSINES upgrade. I want to set up a dual boot system when i get my VISTA disk. should i use partition magic and set up a new partition for vista or is there a better way of doing this
View 2 Replies View RelatedI initially started with XP and created a separate partition for Vista, installing Vista on the other partition, Vista sees the (XP) Earlier version of windows. When I choose XP, I get the following error: NTOSKRNL.EXE is missing or corrupt. If I repair the XP with fixmbr - I end up screwing up Vista. Then when I repair Vista, it end's screwing up XP
View 3 Replies View Relateddoes ne1 know if vista can dual boot with xp no problems yet only wonderin cuz we are very close to vista, and i want it. i cannot use my dorm room internet with vista cuz of bs security shit.
View 1 Replies View RelatedI'm currently running Vista on a raid 0 array, and want to dual with XP. I have two partitions, one with vista and the other that I tried installing XP on. After it finishes the initial installation and restarts it says to press any key to boot from the CD. I wait without pressing anything and than it says that there was an error reading the disk. If I remember correctly, after it restarts it goes strait into windows setup. This happens every time I try restarting, but I can get back into vista by putting the hard drive to boot first. In vista I can see the other partition where XP was installed, and inside is just a folder titled WINDOWS and it seems like all the windows files are in there
View 5 Replies View RelatedI'm having problems dual booting XP with Vista. My first problem is that I can't see the space I create from when I shrink the volume on the XP install screen. I have 2 HDs, both over the 137 GB limit (or whatever it is) so I assume it may be related to that. Also the main HD has a separate partition for Vista.
I don't really use the one HD so I was going to just install XP on that and be done with it. Well when I went to do that, it said that it couldn't recognize the formatting on the C drive or it may be damaged and would need to reformat it to continue. I canceled out of it and then my pc wouldn't boot. I had to put the Vista cd in to repair it
I'm thinking about unplugging the C drive and then trying again. Or would that cause problems when I plugged it back in?
I loaded a second disk drive with Vista Beta 2 and have XP on another drive.Problem is I don't see Vista as an option to boot from? What is the name of the file(s) I have to edit to get this to work?
View 1 Replies View RelatedI have a new laptop that came with Windows Vista. I have been trying to load it with Windows XP because Windows Vista didnt work. I am pretty sure a format and clean install will wreck my warranty, hence the dual boot. So far, I have been able to partition and install XP SP-2 to a partition. I've booted into XP fine but my Vista partition is not available. I think that the partition table or MBR has been corrupted.
So to repair this, what I did was boot up from the Vista recovery DVD and run the 'startup repair' option to reload the bootloader for Vista and thus, enable dual booting. When I rebooted I got a black screen saying 'Invalid Partition Table' or something to this effect. I tried repairing the MBR and so on and so forth from the console on the recovery DVD but this proved to be pretty much totally fruitless. So I went through and did an install of Windows XP once again, to my other drive partition I had created. So I am basically where I started.
I had vista and xp in dual boot and decided i was going to delete the vista partition, well apon restarting my comp,i get a real quick Invalid boot something or other, cant read all of it before it disapers, and then nothing, it wont boot into xp.i have done a fixboot and i did a bootcfg/rebuild and still nothing
View 14 Replies View RelatedI wish to set up a dual boot arrangement using :existing 300GB HDD and new 1000GB HDD
existing Win XP pro and new Win Vista existing Wireless Broadband and new ADSL2+ without physically changing plugs on the internet and allowing access to the alternate HDD from each selected boot. Also is there an online training facility where I can learn more about programming system modules and changing startup files and defaults. I did do a Microsoft course years ago on NT4 but my notes and memory have gone astray
I had partitioned my HD to run XP (pro sp3) and Vista. Not liking vista, I deleted it and merged the two partitions into one, XP. Now when I boot I still get the option to boot to vista or an earlier OS. There is only one OS so I thought that would just be gone. Its not. How do I get rid of that screen at start so it just boots into xp, I'm being careful because I tried to reverse them when I partitioned it and ended up with a real jumbo
View 2 Replies View Relatedim not sure if the way round iv done things was stupid or not, I have my machine, with XPPro installed on, bought another H/D and installed vista 64 on it, however i installed vista with the xo drive unplugged, and i cant work out how to get an OS choice on boot
View 6 Replies View RelatedProblem: I am unable to connect to the internet.I have a new build dual boot system with Vista x64 SP 1 Home Premium on C: drive Seagate 120G 7200, XP Home Edition SP 2 on E: drive Seagate 160G 7200. A third Seagate 500G is for games, etc. Vista was installed first and the internet connection works. XP works well except I cannot make an internet connection. I have a Linksys WRB54G router which takes its internet connection from my cable company's modem. I have 4 ethernet connection points: 1 goes to a desktop, another goes to a notebook, the third goes to the computer in question and the fourth is unused. This router also has wireless capability. My build chassis is a Thermaltake "Kandalf" LCS, 1000W CoolerMaster, XFX 790i Ultra MB, Core2 Duo E8500 at 3.16 GHz, 4gig Corsair DDR3 in two 2gig sticks, two XFX 9800GX2 in quad SLI, a cd/dvd drive, and a floppy, kb, and mouse. Motherboard has two ethernet ports, one in use (Vista).I am not familiar enough with networking to know how to proceed. The Connection Wizard is no help, 'specially since I don't know what I am doing.
View 4 Replies View RelatedA couple days ago, I was running Vista and XP on two seperate hard drives on my desktop. I have since deicded to use the Vista hard drive for data storage and have removed it from my desktop.However,whenever I boot up my desktop, my computer still goes to the black windows uploader screen and askes me to choose and "Earlier version of windows" (the XP) or my non-existant Vista.
View 2 Replies View RelatedI installed XP x64 (Yes, I know, that was a mistake) on my machine a while ago and was tired of having to put up with all the incompatibility issues that had been arising, whether it was not having iTunes work properly to even some of my favorite software just not loading and prompting me with error messages.
View 4 Replies View RelatedI'm going to build a new computer. It will have a new 500 GB Seagate 7200.11 32 MB cache. I want to reuse my current 500 GB Samsung Spinpoint 7200 RPM 16 MB cache, which is currently used only for backup storage. What's the best way to have both XP and Vista on the new computer (which is also possible to do)?Vista on the new Seagate; XP on the the old Samsung (will all my files be wiped out during the installation?)The reverse of the above XP on 100GB partition on the new Seagate; Vista on the remaining 400GB; use the old Samsung as I have been all this time. XP will only be used to run Internet Explorer 6 and minimal web design tools.
View 1 Replies View RelatedI will be formatting my drive now and I want to install XP and Vista so that I can choose which one to load at the start of booting up. How would I do this? Do I need to create two partitions, install both operating systems on the separate drives and then done? Or is there more to it? Which operating system should I install first, if there is any difference
View 1 Replies View Relatedi have xp, and i have a vista disc, i was wondering if i could dual boot with vista so i don't have to format my hd when loading vista as i don't want to lose all my applications.
View 7 Replies View RelatedI have been trying to dual boot my 2 operating systems which are on 2 separate sata drives for some time. I have read around and can't find a solutions that seems like it should or would work for me. I have 3 hard drives 2 sata and 1 ide, the ide just has music mp3's. I used to dual boot my 2 XP operating systems just fine by changing the boot.ini but I can't find the correct way to choose the numbers with my new Vista installation
View 4 Replies View RelatedI have a four year old eMachines that has expired and isn't worth repairing. I would like to use the OEM Windows XP Home restore disc from this computer to dual-boot my Vista machine (HP Pavilion a1730n). Is this:
1. possible?
2. ethical?
I want to do this because I can't use many of my programs on the Vista machine. If I can dual-boot the eMachines restore disc I can use Windows Home until vendors catch up with Vista.
I had Windows Vista in my laptop. I thought of going for XP/Vista Dual Boot. I took XP CD and booted from it and installed XP in my D Drive (Vista was in C Drive). Later on I didn't see XP/Vista Dual Boot option so I modified boot.ini file and though I am able to see Vista option now but still Vista fails to boot. XP is booting fine.
View 2 Replies View Related