True Image Vs. GHOST
Feb 10, 2006what is difference between True Image and GHOST
View 1 Replies
ADVERTISEMENT
Go Back Or Ghost Or Acronic True Image Or ?
Sep 29, 2006solution to a System Restore that will no longer do so on my pooter a two year old XP Home sp2. Used to, doesn't now and used so rarely don't know what might have caused the problem. I was able to complete "cured" the problem-still no Sys Restore.
So began to try a different approach to recover in time of problem. But have become confused about which is the better approach. Something like Go Back or something like Ghost or Acronis True Image. I am not locked into any of those-but they seem to be most often mentioned.
Acronis True Image Or Symantec's Norton Ghost?
Jul 31, 2005I have XP Home on my computer and am useing XP's backup program and system restore to keep out of trouble but after reading alot of post on this newsgroup I have decided I need a better way to back up my OS. I would like to know which is the best and easiest to use Acronis True Image or Symantec's Norton Ghost
View 28 Replies View RelatedCannot Make Drive Images With Either Norton Ghost Or Acronis True Image 11
Jun 3, 2010Using Norton Ghost 9 and Acronis TrueImage 11 on Windows XP service pack 3. Disk cacheing is turned off on all drives and external Drive S is set optimized for quick removal.
Windows - Delayed Write Failed Windows was unable to save all the data for the file S:System Volume Information racking.log.tmp. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere. System Restore is turned off on all drives. When I attempt to write an image of 1.5-TB internal drive R onto external USB 1.5-TB drive S, Ghost hangs permanently at 2% with no error message.
Acronis Error on attempting to write image of 1.5-TB internal drive R onto 1.5-TB external USB drive S: ERROR E00070021 Unable to create volume snapshot
Ghost Lines When Dragging An Image
Apr 14, 2005When I try and drag an image off of my CF or any other card, I get ghost lines that trail the images into My Pictures. They dissappear if I minimize the screen and then re-maximize it. Just downloaded updated Nvida Video drivers. I have Windows XP Prof. with Service Pack 1
View 1 Replies View RelatedGhost Image On Desktop After Repair Of OS
Nov 5, 2006I am having this odd graphics glitch on my desktop after I recovered the OS from a system32 file corruption. I used the recovery console to repair the corrupted .dll file, and everything is working properly now except that every once in a while when I right click to bring up an options window on anything (desktop or program icon) and then left click on one of the available options, a ghost image of the option I clicked will remain on the desktop. It doenst interfere with program functionality, but is just more of an eyesore. I have updated all my drivers I can think of and run scandisk on the RAID setup.
View 4 Replies View RelatedCreate Self Installing Ghost Image For XP?
Mar 31, 2005I currently use Norton ghost to make backup images. Can I use it to create self installing backup images so that a user can just pop in a disk and sit back and let it install
View 11 Replies View RelatedBootable Dvd From Norton Ghost Image
Aug 10, 2007I've created a Norton Ghost (v10.0) image of my winxp os disk. Whan I want to do is to make it to a bootable dvd, so whenever I want to reinstall it all I need is to boot from the ghost image and it recovers my os partition. But I can't figure out how to do that.
the files I've got from Norton Ghost: winxp_image.v2i NG Recovery Point Storage.ini computer_name.sv2i
Does Not Show Up As Ghost 2003 Image
Jul 3, 2005I am trying to clone my work machine to use on a dual boot system on my new machine. My old works machine has to run win 98 for some of the works programs to be able to run. When I use ghost 2003 and try to clone to an
external drive it goes ok but does not show up as a ghost image there fore cannot restore on new machine partition running win 98. What am I doing wrong.
Ghost Image Complications- I Need To Transfer Data
Mar 26, 2005I need to transfer data, settings and programs from one notebook to another. Should I expect trouble if I make a ghost image of the hard drive on the original notebook, image it on to the new notebook and install all the drivers for the new notebook? There are a few large programs and alot of critical data and settings, so if this method works, I would like to do it this way. The old notebook will have Mandrake installed, so the XP license will continue to only be used on one computer.
View 6 Replies View RelatedHow To Take A Ghost Image Of My Entire Show It In Sceenshots?
Mar 31, 2010how i take the image of my Xp
View 2 Replies View RelatedSlipstream Applications / Super Ghost Image
Sep 7, 2005I'm interested in creating images for my XP workstations, however I would like to maintain 1 images for multiple machines. Does anyone know of any process of slipstreaming, applications such as Office, IE, ...etc into an XP install? Or how about using Ghost to create 1 image that can be applied to machines with different hardware configurations
View 1 Replies View RelatedUpdate Not Updating On A Norton Ghost Image
Apr 8, 2008i created a norton ghost image of a machine, which i deployed onto a new pc. my problem is that when i go to run windows update, it runs through the process, finds a lot of updates, but then fails to run the update. the pc i took the image off would have had the latest updates, but on the new pc it looks like the windows update wont work.
View 3 Replies View RelatedHow To Make A USB DRIVE Bootable For Ghost Image
Jul 5, 2010make a USB DRIVE bootable for ghost image
View 1 Replies View RelatedRestore Ghost Image, Boot Up But Login Loop
Jan 19, 2008I have been in the recovery console, I have tried making a winpe boot disk "Failed due to errors" tried fixing the MBR, even tried to connect to it remote with regedit to make some changes in the registry with out success. I have even installed another copy of win xp on another drive and booted the system up with the 250gig in it and changed the drive letter in there. After taking the one drive out and booting with the 250gig it still has a letter of "C:" and still the same login loop.
View 9 Replies View RelatedXp Ghost Image- Start Window Normal Screen
Feb 14, 2005I did I make a ghost image of my xp system (7 gigs), and I want to use that image to install on 2 other systems.BUT,as you know xp takes an image your system so you can not put ehe hard drive into another ssystem and have it work. I install in on to a different system, and in took great(installed with on problems) but know as soon as I restart I can here it but it goes driectly to the safe mode,last best configuration,start window normal screen.
View 1 Replies View RelatedHow To Make A Good Ghost Image On A Samsung P500?
Nov 14, 2007I am just in the process of producing a (ghost) image on a Samsung p500. This is for our student Higher Education courses at our college. What came to mind was that i have never seen a post that specifies the features of a good (ghost) image. Im a trainee Helpdesk Engineer at the moment so im sure my images could be improved
View 1 Replies View RelatedDid't Start After Creating Ghost Image- Corrupt NTOSKRNL.EXE
Nov 9, 2007Norton ghost Image.Well i have been successfully creating images for IBM,DELL and other PC's and restoring them as well using Norton ghost 2003.I have been assigned to create a new Image for MSI type.I have successfully created the image using Norton ghost 2003 after Syspreping the machine..Well when i restore the image everything goes fine and the image is successfully restored,but when i start the pc,it give me a message"Windows could not start because the following file is missing or corrupt NTOSKRNL.EXE
View 3 Replies View RelatedWinXP~ Ghost 2003 Image Being Checked PC Turns Off, Why?
May 25, 2008I have Windows XP with SP2 formatted to NFTS. My Ghost program is Ghost 2003. I have been using this program for a number of years now with good results Ghosting the entire C Drive onto my slave drive that is formatted to FAT32. I now find that the slave is getting rather full and now need to Ghost the C Drive image onto and external hard drive.
View 3 Replies View RelatedConverted The C-Drive To NTFS: Ghost Image Still Work OK?
Jul 3, 2005I did a ghost image of my C-Drive as a FAT32 using Nortons Ghost. I have since converted the C-Drive to NTFS. Will this ghost image still work OK if I need to restore my operating system (Windows XP Pro)?
View 2 Replies View RelatedNorton Ghost Image Restored Accidentally To Wrong Hard Drive
Nov 28, 2007I have two hard drives connected to my system. I will refer to them as A and B. I had previously taken a Ghost image of drive A and wanted to restore this image to the drive. However, both the drive were connected to the system when the restore occurred and the image got restored to drive B. Hence I have lost the data I had on drive B. The operating system in use is Windows XP. The version of Ghost used is Norton Ghost 2001
View 4 Replies View RelatedIllegal Copy - Not True -correct ?
Jun 23, 2006I keep getting the message that my copy of Windows XP Pro is an illegal copy. This is not true and how do I correct it. The program came with the computer from ACER installed at factory.
View 9 Replies View RelatedTrue Duplicate Files - Delete?
Jul 18, 2006I want to purge my system from "true" duplicate files. However, when I tried to do so in the past, I ran duplicate file finders, and deleted files which were supposedly duplicates. I then had to locate and reload a number of them because I began to have inconsistencies in my system. My system presently shows a large number of duplicates, but how can I be assured they are before I delete them?
View 3 Replies View RelatedGet True Color(32bit) For Professional?
Jul 28, 2005For some reason in my color settings menu I have no option for True Color. Is there a way to get True Color(32bit) for Windows XP Professional?
View 8 Replies View RelatedSvchost.exe Process Using More Memory Than Explorer.exe - Is True?
Aug 4, 2005I was recently informed that if a svchost.exe process is using more memory than explorer.exe, it's a dud. Is this true? Also, I have six svchost.exe processes running at once, is this normal ?
View 1 Replies View RelatedWorking Through Previous Thread - CA True Vector Program
Apr 14, 2007I am having intermittent, but annoying system problems. I was working this through a previous thread, which stopped getting responses. That thread was located at http://forums.techguy.org/windows-nt...tem-crack.html The symptoms include: Microsoft Outlook, refusing to open, giving an error message that it requires the windows installer program. Additionally, Firefox intermittently refuses to open, giving memory errors. The CA True Vector program shuts down.What I have done to date: Ran checkdisc, which did not indicate any problems. Uninstalled and reinstalled the CA suite.
View 14 Replies View RelatedZone Alarm Pro TRUE VECTOR Stops IE Explorer
Aug 7, 2005In january of this year, I bought zone labs, zone alarm pro, after using free zone alarm for over 1 year. It ran flawlessly until the 1st of August,2005.After the latest update,(from zone labs) I received an error message (every time I logged on to the internet)that IE 6.0 was encountering errors and would have to close.Then the program would not close due to its inability to respond. I had to use task manager to close it, and that did not always work. The next error message came on right after that and stated that True vector had shut down; as soon as that message displayed another came up asking if I would like to restart True Vector. I clicked 'yes' on this and thereafter my ISP's connection (earthlink) completly froze up. Task manager again used to log off of earthlink. I googled True vector, and found that it was something included in zone alarm pro. They said the problem had been fixed, but I do not think so.After using 'add remove programs' to rid myself of zone alarm pro,and editing my registry to the best of my ability, everything returned to normal: ISP loaded normally and ran correctly. Zone labs will not deal with my problem, (would not even allow me to contact them unless I used their expensive phone support).So, as of now, my system is up and running wonderfully, without zone alarm pro; but I do not feel that winxp, service pak 2's firewall is adequate. What to do?
View 6 Replies View RelatedCannot Create Image To USB HD With Drive Image 7
Dec 3, 2006I am trying to create a full HD image of my Dell c800 Laptop using Drive Image 7 (circa 2003) to an USB HD. I have tried twice and received failures about my HD having bad sectors OR locked sectors. I ran check disc with repair and did not find any problems. Re-ran check disc from the boot disc that came with the application and found no problems with the disc. Tried again for a backup and received the same error. I am thinking it is one of the programs I have loaded has a locked sector or one of my processes that loads during boot is the problem?
View 14 Replies View RelatedHow To Replace Boot Gui Image With Own Image?
Jul 13, 2007whats the best way to replace the native Win XP boot gui screen with my own graphic message display when XP Boots?
View 3 Replies View RelatedLogon.exe-Bad Image / Not A Valid Image
May 3, 2006So two days ago my computer suddenly decides that when I arrive back home it would want to start running like a win 95. Thus, I promted to shut it down. Once it arrived to the loading screen after the reboot nothing occurred. I then decided to wait... 30mins later it goes black and then the message arrives: "Winlogon.exe-Badimage The Application or DLL C:/Windows/System32/sfc.dll is not a valid windows image. Please check this against your installation disk settings." I have alot of stuff on my computer I need for work, is the only option to deleted everything and re add XP?
View 8 Replies View RelatedZone Alarm Pop Up "True Vector Has Shut Down"?
May 5, 2007I haven't been back for a couple of years now after you helped me with my last problem. And thank you for your help. I seem to be having a problem lately with my computer and to be honest with you i can't even realise what it really is. The topic title might be a bit irrelevant but that's how i started noticing the problem. First of all i'm running windows 2000 (yep...still) and what's been happening lately is that every so often (about twice a day) there is this pop up message saying that true vector has shut down and asks me whether i want it to restart or not. I got the Zone Alarm 6.5.737.000. Now whether i press yes or no the result is the same.
View 1 Replies View Related
