Power Schemes stopped working - no longer turn off screen or system..I recently reinstalled XP and got the latest update.I've noticed that my Power Schemes no longer work, no matter which settings I use. Also, there are timers for "Turn off Monitor" and "Turn off Hard Disks", but the "Turn off Computer" is no longer there.
View 5 RepliesWhen I go into control panel power options power schemes, it shows blank inside the box, I couldn't set my time to turn off, standby etc.
View 35 Replies View RelatedMy sound scemes have all the sudden died. I keep going back to the control panel and re-saving the default and schemes, but it doesn't ever seem to work. i am at a loss,
View 6 Replies View RelatedI'm running WinXP pro and have lost all the reguler power schemes from the power options propreties window. Also I'm unable to Save a new scheme.I beleive the schemes where deleted from the power properties window by right clicking and selecting delete. They used to be there anyway Unknown is listed above Turn off monitor-Turn off hard disks-System standby-System hibernates and everything is greyed out. They are still listed in the registry but with no value set.How do I go about getting the schemes back?
View 5 Replies View RelatedNormally I would go to the control panel, then hit display, then screen saver. At the bottom there is a butten to control power. I used to have several options as to when to go stand by etc. It is all gone. Can someone tell me how to get that back. It is running one of the schemes now but there is nothing shown. This is on XP.
View 5 Replies View RelatedI am not sure how this happened, but it did anyway. During my problem with system restore, I created my own power scheme called test. I have noticed that I am missing some power schemes now when I try to access them using the power options choice on control panel. I am missing "always on" "presentation" "minimal power management" and "max battery".I don't know why they don't appear in the drop down menu under power schemes as "home/office" and "portable/laptop" and my "test" schemes are there.I have found these schemes exist in my registry in several locations by typing "powercfg" in the registry editor.Hopefully someone will know how to restore them. Is there an *.inf file to right click to reinstall? I found a bunch, just not sure which one it might be.
View 4 Replies View Relatedi can't adjust my power schemes in my power options--i've got my monitor shutting itself off after 10 minutes, always have , just recently got a new 3d screen saver and tried to adjust the shut off time & i can't change any of the setting in power schemes. where it usually has the option home / office / laptop, etc its black and won't let me adjust anything seems strange.
View 8 Replies View RelatedI have reset my power settings, many times, to never turn off. I have tried setting a special scheme. I have reset rcgfrestore.reg, and savesettings.reg per KellysKorner items # 204 right, and #30. After going online for a while, "turn off monitor" changes from "never" to "15 minutes", and "turn off hard drive" changes from "never" to "1 hour". So far, I am unable to determine what triggers this change.I am using XP MCE, fully updated with Athlon 64 3500.
View 6 Replies View Relatedi need to restore power schemes/configurations" my compuer goes to sleep i have no control to change options at power schemes.
View 1 Replies View RelatedI have lost the selections of different power schemes. How can I retrieve these?
View 2 Replies View RelatedHow do you copy power schemes for one profile (the Admin or Setup profile) across all profiles that log on to that machine. Users are created in the standard folders under documents and settings, however their windows settings seem to be setup via some sort of profile creation script that windows uses. I have tried copying profile information from the setup profile to default and all users profiles... but it seems to make no difference. What I am looking to do is to keep all users profiles constantly ON, instead of standby after 20 min without changing each profile each time a new one is created.
View 1 Replies View RelatedI am running windows XP Professional Edition,My Power Schemes In the drop down menu were deleted such as Always On, Max Battery, Home/Office Desk;etc and nothing that I have done can get them back they are totally blank. Even where you would set the minutes to turn off monitor, Hard disks, and System hibernate are completely blank and greyed out Therefore My Computer Will not go down when I leave it. Does anyone have any input on how I can rectify this problem? It also will not allow me to Type in a scheme and use the" Save As" Option.
View 2 Replies View RelatedI searched around the forums and didnt find any thread relating to my problem. I searched around the internet as well and found similiar issues but none with a solid solution. I was hoping to find one here. My problem deals with the Power Scheme in Windows XP Pro SP2. When I try to set the amount of time before my monitor turns off, it doesnt work properly. After the specified time has elapsed, the monitor would go dark and it would say "Monitor is going into sleep mode" which is normal for my monitor (HP f2105 wide flat screen lcd). But then just as it sleeps, about 1 second later, my windows desktop appears like it never went to sleep at all. When I move my mouse I notice my desktop flickers for a split second.Similiar threads on the net suggested there were some third party programs that is keeping my system active or things like my mouse sensitivity moving etc. I tried removing all my perperphials but it still doesnt seem to work.
I recently reformatted my machine and installed the essentional programs/windows updates/etc. I run on a ATI X1950 PRO 512MB video card and installed the new Catalyst 7.12 software package for my drivers. Everything was working perfectly. The Monitor turn off option even worked then.... until I noticed this new driver package seems to be a bit buggy. My monitor would turn black as I would be viewing videos off the internet with my WMP or whatever Im using and all I am left to do is reset by pressing my power button or switching the PSU button (Although strangely, 3D applications ran flawlessly).So I got an earlier version Catalyst 7.10 and installed that and everything is working awesome again... execpt the Power Scheme mode to turn off my monitor. I am unclear on why it would be doing this by just installing another set of drivers for my video card. I am assuming there is some mix up in some file somewhere thats still being used, but thats just pure guessing now.
I recall even before I reformatted I had the *SAME* issue. I was using video drivers 7.8 or so without any problems and decided to update to the latest 7.12 and thats when I *FIRST* noticed that power scheme monitor turn off didnt work any longer. So I decided it was time to do a fresh clean install and I used the Catalyst 7.12 and it worked with the power scheme option. Its this transition between drivers or something... or perhaps ATIs drivers are faultly at the moment and it'll fix itself with future updates... but then again other people around the net with similiar problems didnt have ATI video cards, they had Nvidia.I am assuming it has to do with my video drivers somehow since thats the last thing I installed/changed before the problem appeared. I went into MSCONFIG and diagnostic startup and checked to see if my power scheme monitor turn off worked there and it did..I was hoping to find an easier solution rather then narrowing down each and every startup application/services in MSCONFIG and then figuring out why its doing this all just to turn off my monitor.
My computer has stopped working all of a sudden. It does not even start when he turns it on. It was working perfectly the night before and when he turned it on the next morning, it just did not start. He says that it never gave any warnings or error messages and this was the first time. Could this be due to the power cord or the power supply?
View 3 Replies View RelatedI'm working on computer (windows xp) and notice the cd-rom is no longer working.
I've tried a couple of things that were recommended through another site.
1) I turned "SAFE MODE" on and the cd-rom worked fine but when I got out of safe it wound not fire up.
2) I uninstalled the cd-rom and let the computer reinstall it but that did'nt work either. Please any help you could give me would be great.
I decided to clear the dust out of the inside of my
computer tower today. After cleaning out all the dust, I turned on the
computer for the first time and I noticed the fan on the side had stopped
operating.
But I have a Nokia Tower/case if that is of any help to anyone. It's the
colourful fan on the side which has stopped working.
My USB devices were working fine untill I went to Windows Updates and downloaded all the latest updates. This is when all my problems started. Now when I plug in a USB device I get a balloon on my task bar stating that my "USB device is not recognizied". I have done all the troubleshooting. I have XP PRo with all the latest updates.
View 1 Replies View RelatedI am running XP with SP1 and SP2.My high speed USB 2.0 stopped
running at high speed. When I attach a device it indicates that device would
run faster on high speed.
My ipod shuffle which has been working normally up until this point is now
only recognized as SMTP 3500 - personal class recovery device
I have tried updating the drivers and have had no luck.
What happened was this: I loaned my computer to a freind and told him, "Don't install anything without checking with me first!" He did, for about half the stuff I took off after I got it back.And my alt-tab has stopped working. The thing is, it works fine for the other profile on the computer. I'm assuming the problem is a registry setting somewhere. I looked and compared but I couldn't find anything out of line. So now I'm at a loss. I know I missed something somewhere. Oh, and I'm using WinXP SP1 on a Compaq Presario 2100, which I update on a regular basis.(This is a loptop I use as a "loaner," not my good one with all my personal stuff on it, by the way. Maybe I should get a copy of Norton Ghost before loaning it out again.?
View 3 Replies View RelatedFor some unknown reason my screensaver just stopped working about a week ago. If I hit the preview button it works fine but when I wait for X amount of minutes for it to turn on it never does. I use it so that it will log me out automatically and auto turn off my monitor after so long, it is very handy.
View 3 Replies View Relatedmy toolbar stoped functioning. I have windows XP and l could of done something by mistake but l'm unable to get it working once agian.
View 3 Replies View Relatedmy keyboard got messed up and stopped working. When I was messing around with the back of the tower to try to fix it, I somehow killed my sound off too. Eventually, I got a new keyboard, but after adjusting with the stuff on the back of the computer tower the sound still didn't work.
Since my sister's computer specs and mine are the same, I checked out the device manager on both of the PCs to see what was missing from mine. I found out that it was a "Realtek AC'97 Audio" listing. So of course, I google it up and download what I find. However, after installing it, it still doesn't work. It doesn't even show in the device manager! And to make matters more confusing, when I start up my computer, it says that I can press Shift+F10 to configure it. When I do that, a DOS-like menu pops up where I can change a few options but nothing I change will get the sound working.
When I go to Accessories --> Entertainment --> Volume Control, it says that there are no active mixer devices available.
I don't think it's related to viruses or spyware. I've scanned multiple times with TuneUp, Spybot, Ad-aware, Norton, and a few other programs.HiJackThis information:
Logfile of HijackThis v1.99.1
Scan saved at 5:58:14 PM, on 9/5/2006
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
(Also, I have no clue why it says WinNT 5.01.2600 on the platform listing. That started happening when I was working with the TCP/IP connections, though it's not important as of now.)
If you need me to post any other hardware listings or, well, anything about my computer, just ask.
The sound on my PC stopped working about a week ago. Hadn't installed anything in at least the few weeks before it stopped.
I decided to re format the PC a few days later thinking that it would be fine, which initially it was, am running XP professional. Windows did all its updates as per normal and the sound stopped again.
Reinstalled the PC yet again to try and get to the bottom of things and this time went through things a bit more slowly. Did it's first lot of updates, was fine after those. That was yesterday that they updated. Tonight installed Service Pack 2 and thats when it has stopped.
In the Sound and Audio Devices section of the Control Panel it is saying there is no audio device installed, yet I had installed it via the CD that came with the motherboard. Soundmax sound on an ASUS k8v SE deluxe motherbord. why something like this may have happened?
I downloaded Diskeeper 2007 Pro Premier for a free 30 day trial, decided I didn't want it, uninstalled it and now my XP Pro Defrag has ceased to work any longer.
I get some weird message that it can't initialize and that I must have downloaded a different version .
guess the two were fighting each other.
Point is, can I download MS Defrag as a stand alone (Googled but no luck) or do I have to reinstall XP all over again...
Also, is MS Defrag good enough are does Diskeeper do a better job for the averge home user?
System Information:
Microsoft Windows XP Professional
Version 2002
Intel Celeron Processor 1000MHz
996MHz, 256Mb of RAM
External Modem, Connected via LAN Cable
I bought myself a LAN Cable.I plugged the LAN Cable into a single port router (one computer at a time) through an external Modem, and it worked great for about a month.
I tried to open a page, and a message said: Problem Loading Page. It had all the usual [U]ww.google.co.uk[U] and www.goggle.co.uk, but mine was correct. In the Taskbar (bottom right hand corner) it came up with an image two computers with yellow dots transferring between them, and then it changed to two computers with a caution sign. I hovered over it and it said: Limited or No Connectivity. So I did the obvious thing, checked cables were plugged in, unplugged cables, restarted modem, restarted computer e.t.c. but it still said Limited or No Connectivity. I went into Local Area Connection Status, and it said, Limited or No Connectivity...to renew IP Address, click "Repair". So I clicked repair, and it said could not renew IP Address, please contact Service Provider. I rang the service provider, and they said unplug everything plug it in and retry... This didn't work. Since then I’ve tried things I’ve seen on Forums, and on websites:
Start>Run>CMD>C:>ipconfig /release
It Showed
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
IP Address . . . . . . . . . . . : 0.0.0.0
Subnet Mask . . . . . . . . . . : 0.0.0.0
Default Gateway . . . . . . . . :
I then tried C:>ipconfig /renew
Windows IP Configuration
An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.
I am unsure what to try next?
I was listening to the audio on my laptop through headphones. Today my audio just stopped working. The headphones belonged to my friend and I can't find mine so I can't to even test to see if it is the speakers. Does the computer think the headphones are still plugged in by chance?
View 4 Replies View RelatedI uninstalled a program I thought I didn't need - something about "stereo" which I thought I had recently installed.
it being that time of the month, I ran my data eraser and overwrote all available hard drive space. So whatever it was its gone.
Now my speakers don't work and the icon is missing.
I recently lost audio playback on my pc. It runs Windows XP and uses Creative SB Audigy Sound Device. It worked just fine until recently. I booted the pc up for the day and discovered no sound. Under "Device Manager" the device is listed as working properly with up-to-date driver. It is the only audio device that can be "un-installed" or "enabled/disabled" other than some "UniModem half duplex audio device" that is disabled. Under "sounds and audio device properties", "Audio Tab" the default playback device is listed as "modem line #3 playback". I tried to change the audio playback to the "Creative SB Audigy", but their is no other option than the "Modem #3 Line Playback". In the same, "Sounds and Audio Device Properties", under the "Volume" tab, it says "No Audio Device".
View 14 Replies View RelatedI've adjusted the volume, and it's not on mute, but it's still not
working. Was working fine, then all of a sudden just stopped. Please let me
know if you can think of anything that might help.
I have Windows XP, and my tab key stopped working. I can use it with the Alt. key to switch between windows, but I can't use it to tab in a document or to move from field to field. Does anyone have a suggestion as to what I should do?
View 4 Replies View Relatedive got an epson 1000ics all in one printer using windows xp home. For some reason, the scanner stopped working. I used to scan using the camera and scanner wizard because the scan button on the printer never has worked. Now it shows the printer being an image scanner but there's no little arrow beside it. I don't think it's being recognized, but the printer works perfectly. The error says the install shield engine (ikernal.exe) could not be launched. the rpc server is unavailable.
View 6 Replies View Related