I was installing windows updates yesterday night when i accidentally shut down the computer while it was installing the updates.Today when i tried to turn on the computer, i chose last known good configuration a, but it keeps on restarting.It doesn't go past the Windows XP Splash Screen. When i tried safe mode and safe mode with networking, it still keeps on restarting.
I tried to reinstall Windows XP XPprofessional instead of XPhome), and all went well untill my computer had to restart for setup. When the computer restarted I got the message: "Windows XP setup cannot run under Safe Mode, Setup will restart your computer"(I think I should have done the XP installation in the normal mode, shouldn't I)But even when I choose "Start up in Normal configuration"(or something like that)in the Windows Advanced Option Menu, while restarting, It starts up in the safe mode.So now my computer KEEPS RESTARTING IN SAFE MODE
I have a Toshiba Satellite A15-S129, and it asks me a couple of options on how I want to start it up1)Safe Mode 2) Safe Mode with Networking 3) Safe Mode with Command Prompt 4) Last known Good Configuration 5) Start Windows Normally. None of them work. It goes to the Loading part and a blue screen flashes and then it restarts.
So my desktop was switched on today to the blue screen saying "Unmountable_Boot_Volume". I tried restarting, I got the same thing. Restarting in safe mode and restarting in safe mode command prompt both brought me to the same thing. I DON'T have the Windows XP CD.
I went into bios and disabled the search for the A: drive , because i couldn't care less. then it brought me to the screen to choose to open in safe mode, normally, or from the last point where windows worked well. problem : i can not use my keyboard in this setting, it works in bios, but i cant choose to load from the last working point of the OS.
I have an older somputer I use to Host Games online...seemed fine last few nite .however the last 2 oe 3 times I have started it...it takes forever to start and a screen appears saying sorry for any inconveinince but windows could not start..etc etc..gives options to start in Normal mode safe mode or last known good configuration..wich is what I tried after turning it off and back on again..still nothing..I can get it to start in safe mode....but it wont boot up in normal mode..just hangs at "Windows XP" screen...Its an older Pentium4 Dell Dimension4300.
I woke up this morning and my pc won't start. It just keeps rebooting and taking me to the safe mode startup menu. I tried starting normally and it just reboots. I have been able to start in safe mode with networking as well as just safe mode.
My laptop is not working at all It's a Dell with windows xp When you switch it on, the start button doesn't work, and neither do any of the desktop icons Only the task manager works nothing else. And also, how do you start a computer in safe mode, And will that help
My computer, when started up in normal mode, just goes to a blank red screen....no icons, no nothing. The only way you can get anything to work in normal mode is by way of the task manager. In safe mode, however, I have access to everything except for sound. I have gone through the Microsoft website and ran all of the virus tests and scans. They say they find things and that they have removed them, but after restarting, it's the same old thing!! I'm pretty sure it's some sort of virus
i have xp sp2 the other day zone alarm had an update, which i preformed but did not reboot at that moment. then i ran system mechanic6 total care program. then i restarted my computer. here is where my problem comes in my computer will continually goes to the screen that states in 30 seconds your system will start in normal mode(it does not) then when it did that for 5x, i tried last known 3x(it did not work),then safe mode then safe mode with network, then safe mode with command prompt.
My computer seems to be in a mess and I have absolutely no idea why.It will only start in Safe Mode, trying last known configuration and normal start ups cause it to freeze atthe loading screen.It started when my computer randomly froze up while I was using it. I tried rebooting it but only safe mode worked, however when I left it alone for a couple of hours it worked normally for around 10 minutes, then froze up again.I thought it could be overheating so I left it for the night, but its still not booting up normally.I've tried using msconfig to make it do a diagnostic startup but that doesn't work either.
Husband upgraded my puter yesterday. New mother board graphics card (VGA Asus more/new ram and new processor and a CPU. Will only boot up in safemode or safemode with networking. As it boots up a screen pops up that "appears" to be telling me why, but it goes off so quick I can't read it. Is there a way to freeze that screen so it can be read? Surely there's some kind of "log in log" that tells you this somewhere in XP?? After booting up for the 1st time we had 2 question marks in the device mgr and we finally got it so there are none. But still it will only boot up in safe mode. We're thinking that boot up screen will tell us what the problem is.
I had LIME WIRE on my computer and it ran great for a while NOW my computer opens in safemode..I am doing a spybot right now but can you look and see if anything is wrong with my HJT.
When I try to boot up Windows XP, when its at the windows loading screen with the Windows logo, the bar under it the blue thing will move for about 6 or 7 times and then just freeze and stop. Then I restart the computer and choose to boot in safe mode which is the only mode that works.This is the second time this has happened,the first time it happened through safe mode I got the Windows Xp.iso image from microsoft.com, and then used a product key locator to find it on my pc because I do not have the windows xp boot discs but my original copy of XP is legit.
I am running Windows XP on an 8 year old Gateway computer,and it will only start in safe mode.This happened after I updated my hardware drivers.I got a fatal system error box,and system restore doesn't work. When I try to use the Gateway Restore discs,they won't play because my D drive isn't recognized. Should I just scrap everything and get a new HD since I haven't had any luck with reinstalling,or is there a way for a computer idiot to reinstall Windows XP without a disc? I never got one,this was my roommate's old PC.Sorry if this is in the wrong place.
I installed a required update for MSN Messenger and after I rebooted the computer, it won't load into Windows and gives me the following error Windows could not start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEMYou can attempt to repair this file by starting Windows setup using the original setup CD-ROM. Select 'r' at the first screen to start repair.How can i fix this problem with the CD? I tried the recovery console, but it is just a command prompt.
Laptop (running Windows XPHome Edition) has developed some problem so that he can't get it to boot up; not even in Safe Mode.He doesn't have his installation disk with him, stuck with a dead computer.
i hope this is in the right forum, but anyways ive had this problem for a while, i cant start my computer, when u turn the computer on it loads up the Emachines screen then the screen goes black then the computer turns itself off and on again and does it again, ive tried the restore cds and they dont seem to work says a few files are wrong or something, and also i cant seem to start it in safe mode,
I have a xp professional 2000+. Okay this is my main problem, yes i have tried system restore billions of times okay, i turn on my computer it goes through all normal steps, it gets to the windows loading screen after that it is a black screen? my computer works in safe mode though.
I have been having problems with restarting my Windows XP home media center. I was trying to install a second monitor to my desktop and decided to disable my NVIDIA GEFORCE 7300LE and also think I changed the video/ monitor settings to auto somewhere in the device manager. Ever since I did that my computer won't reboot past the dell and windows logos. I have the dimension E510.
The thing is that this version of the xp didn't come with an installation disk for me to reboot the sequence so it keeps asking me for a diskette. I can't even go into safe mode only the f2 setup. PLEASE help me! I really don't want to lose my files.
I have a Great Quality ZX-3310 laptop. It recently froze up and would not reboot. I unplugged the machine and plugged it back in to restart and now I get either the windows start up page that freezez before it is loaded or I get this message: "RS482M- Test Bios BR#13207A". Sometimes I get nothing on the screen but I can hear the fan run. It will not let me start in Safe Mode. The DVD drive recognizes a DVD it there but it immediately freezes on start up.
trying to restart computer in safe mode, when i press f8 it takes me too the safe mode options, but when I select safe mode w/networking or safe mode, I get a black screen w/lines of jibberish and the screen freezes and wont let me do anything until I restart in normal mode which works fine, but I'd still like too restart in safe mode if needed by the way the jibberish is about 15 lines all start like this: multi(0)disk(0)rdisk(0)partition.
I recently got a few notifications of viruses on my computer. Along with it came a lot of adware pop-ups. I downloaded Kaspersky AV 7.0 from their site and am using it as a trial version. I had an older version of McAfee, but hadn't renewed and do not have up-to-date virus definitions. As the title reads, my computer will only work when I boot windows in safe mode with networking. When I try to boot it up regularly, it goes very slow at the log-in screen and then once I log in, there's only a black screen with the mouse pointer. I left it at that window for a few hours hoping it would eventually load. Not the case. Same thing happens when I boot in safe mode with the exception that ctrl+alt+del works and will bring up the Windows Task Manager and then I can run/terminate programs from there. But no start toolbar or icons or anything else. I have done several full scans and they come up with viruses every time.
I returned home the other day after shutting my computer down for the first time in a couple weeks. I turned it on it got to the Windows log on and shut down and constantly reboots over and over. I tried chkdsk /r I couldnt get /f to work by itself Last know configure didnt work I foolishly tried this LINK Then I read in another forum that it could be a bad driver. I do recall when I was able to get in safe mode an error for my printer came up so I want to get in safe mode and try to uninstall it. but now safe mode won't work and after doing that part in the link its says I have 2 O/s to choose from?
i have a problem that my computer restarts. i could be normally surfing the web and it just restarts and i try running spybot and when it is almost done it restarts i try running in safe mode and spybot restarts... can this be a virus
I've been working on my father's computer (an HP pavillion zv5000), and realized that he had some Windows XP updates to be installed, so I decided to download them. What I didn't realize at the time was that he hadn't installed any updates in almost 2 years (though Automatic Updates appear to be enabled). When I rebooted after the installations were complete, I could not start in Normal Mode. When starting normally, I get a black screen with white writing saying that there's been a problem with the computer (can't remember word-for-word), and gives me the option to start in safe mode, safe mode with networking, and another safe mode. It also offers to start up with the last settings that worked, or normal mode. When I try to boot up in normal mode, it sends me back to that same screen, and likewise when I try to boot with the last settings. Now it only works in Safe Mode. I'm not really sure what's happened, and if it's related to the updates or if it could be a virus.
I have XP Home on a HDD which does a restart loop continuosly - gets to the Windows logo and restarts.Used a XP disk to do a Repair thats OK to start with gets to the "Checking Drive C:" - Yellow Bar goes across.Then "Windows has finished checking drive C and now needs to restart to continue Setup" - another loop I thought that once the yellow bar completes, it goes on to Repair.PS - won't load Safe Mode either
My son's computer with XP home has crashed big time! I can't get into safe mode - Upon startup I see the emachines logo, then the windows xp logo and then I get a black screen with just a white cursor (which moves around with the mouse) & that is it. When I attempt to start in any version of safe mode all I get is a black screen that has safe mode in white in each of the four corners and across the top overlapping the safe mode is: Microsoft (R) Windows XP(R)Build 2600.xpsp-sp2-gdr.050301-1519:Service Pack2)