Is this possible? I recently tried to install Linux, maybe it was FreeBSD, not sure i'd have to go home to look but i'm at work.... Anyways I tried to install the second OS on my ext. HD but, you guessed it... PC wouldn't boot to the ext. HD. I want to do the so i can learn and expand my knowledge etc. but it isn't looking very do-able I don't think that there is a place in my PC tower to insert the hard drive into.. ie 2 hard drives.
View 13 RepliesI have been trying to install Windows XP as a second OS as I already have Windows 7 Ultimate installed. Unfortunately, after I select a partition, format it, and reboot the system stalls on the screen after the BIOS that has something to do with a list of devices and such. After 10 or so seconds a few characters and letters go blank randomly on the page. I rebooted and selected my cd drive as the boot device and accidentally didn't press a button in time to boot and a bunch of highlighted numbers were thrown all over the screen and a random smiley face on one of the lines.
View 12 Replies View RelatedI'm trying to dual boot 2 different installs of xp pro from 2 drives using the Windows boot loader. I've edited the boot.ini every possible way I can think of, but nothing works. I've done this plenty of times using a linux boot loader or dual booting from a single drive but I cant figure this out. I haven't been able to find any reference to this subject anywhere, but I think it would work. Anybody have a clue as to how to do this? I know I can use a different boot manager to accomplish this, I just wanted to make the Win boot.ini work. Or, does anybody know of a good boot manager if I cant make this work?
View 9 Replies View RelatedI have dual booting on my PC with Vista home premium on a 500 Gb SATA disk and XP Pro on a 250Gb SATA, both internal. Vista no longer holds terrors for me and I'd like to get rid of XP and regain better use of the 250Gb HD. Can I just remove XP from the control panel in the XP boot or is it a lot more complicated?I don't really want to re format the XP drive as I'd have to transfer a lot of data and files
View 3 Replies View RelatedI have Win XP home installed as OEM software on the C drive of my PC.
I also have this OS as a Norton Ghost file supplied with the PC as a
"Recovery CD".
I have installed a second hard drive designated "D"
This all works fine.
I wish to install Win 2000 (which I have on a Microsoft cd) on the second HD.
I would then hope at boot - up to be given the choice of which OS to load.
Can anyone tell me what is the simplest way to do this?
I am running Windows XP and would really like to share the hard drive with another OS "Linux" and dual boot.
View 1 Replies View Relatedi plugged in my secondary monitor and my primary quit working, now the secondary shows the screen but my primary just has a box floating around that says self test feature check... i just want more work space, can someone help me?
View 6 Replies View RelatedI'm using a Sony laptop and have an external screen attached. I've set up XP
to use both the external and built in laptop screen and also checked the
"Extend my Windows desktop on to this monitor". This all works ok with one
exception.
As I sit in front of my laptop the external monitor is to my left. In order
to get the mouse on to the external display (on my left) I have to drag my
mouse pointer to the far right of the laptop display.
I've tried making the external monitor the primary display but this doesn't
help me either.
Is there a way I can tell XP that I want the mouse to move to secondary
display when I drag the it to the left hand side of my primary display?
i have a pc with 2 ports for monitors i am using the dvi ouput to my plasma
tv (through a dvi to 15 pin converter) which works fine. however i cant seem
to get my other 15 point outlet to work.
I am assuming i have to activate some sort of dual monitor software? I am
using xp
basically how do i use 2 monitors simultaneously
I have windows XP home on one of my machines, what will i need to setup dual monitors?? My video card doesnt have tv out or anything.
View 8 Replies View RelatedMy PC has just a VGA port. How can I setup a dual monitor?
View 7 Replies View RelatedIn win xp pro sp2 I get a dual log in, and man does it bug me. First I get the old nt style log on, but I get an error that says I can't log in this way(yes that is paraphrased). Then I click ok and it moves to tthe typical windows xp log in style. How do I make each of these go away?
View 7 Replies View RelatedRight now I am running an AMD 6000+ processor on Vista 64 with 4 GB 6400 Ram and EVGA 8800 GT GPU. Runs real nice and games (including Crysis) run smooth. My rig is set up with 2 hard drives. Drive #1 has my Vista 64 OS and Applications. Drive #2 has all my games installed.
1. Now that XP SP3 is out, should I set up a dual boot for gaming?
2. Since my games are all on Drive #2, should I install XP Professional there or on Drive #1 where my Vista is?
3. Will the applications/games I installed under Vista work under XP or would I need to re-install them? The latest benchmarks I have seen for gaming Vista vs XP shows almost no benefit to XP anymore with the latest drivers. Will SP3 imporve XP enough to make it worth it?
It possible to install XP on one HD and MCE on another, and selectively run one or the other?
View 12 Replies View Relatedi have a 500gb hdd with XP installed in it. And it's partitioned to 4 drives, each with specific programs installed in them. Now i'm planning to buy a new HDD maybe 500gb and then installed vista business on it. So here are my questions:Is it safer or easier to unplug the HDD with XP and install Vista on the new HDD, then plug it back in? Will it still work as dual boot? Will the programs I installed b4 vista in the other drives still work while running XP after the dualboot is complete? Will there be crosslinked desktop icons on Vista, that are on the XP desktop?
View 8 Replies View RelatedHey everyone as you might have seen I have 2 other threads asking about dual booting between windows 98se and XP I have an idea but im not sure if it will work. now here it goes. I have 2 hard drives on this compuiter 1 a 20 gig and ones an 80 gig, now the 20 is the master and the 80 is the slave i want 98se on the 20 and XP on the 80, now if i reformatted my 80 gig and instlled XP on it , even if its the slave drive will i still be able to boot back and forth between the 2 drives with 98se and XP.
View 9 Replies View RelatedI hope somebody help me in my problem which may be easy for others but for me its not. Anyway, I would like to have a DUAL BOOT in my laptop using windows xp but with different language. I plan to make use of C drive for japanese windows xp and d drive for my english windows xp. I have back up my files and I have finished reformatting my C drive. How can i format my d drive and install an english windows xp?
View 7 Replies View RelatedI just installed a second hard drive in my PC. The old one still works fine and they are IDE HD's and therefore set-up as master and slave. I have XP up and running fine on both drives. My question is this. Is there a way to boot XP from either drive through bios settings, or do you have to physically open the case and change the jumpers to accomplish this.
View 14 Replies View RelatedI have two monitors at home and at the office and both work fine at either place. But when I connect from home to the office via VPN, I can't get two monitors to work.
What do I need to do?
I'm using a Sony laptop and have an external screen attached. I've set up XP
to use both the external and built in laptop screen and also checked the
"Extend my Windows desktop on to this monitor". This all works ok with one
exception.
I've tried making the external monitor the primary display but this doesn't
help me either.
Is there a way I can tell XP that I want the mouse to move to secondary
display when I drag the it to the left hand side of my primary display?
I'm using a HP laptop with a second monitor. When I disconnect the extra monitor, programs still "load" on that system. How do I move them back to the laptop display.
View 7 Replies View RelatedI have read my motherboard manual and I found out that I have the ability to use dual monitor support.
I used it on another laptop that I had and it worked well except the screen resolution changed and I had to reset it.
I now want to use dual monitor support on my desktop computer for power points and other things but I think i may need a DVI to VGA adaptor which I might buy. Is this the right thing to do. Will I need anything else apart from this adaptor? I can see a DVI port apart from my VGA port in my pc.
I don't have the connectors mentioned in the motherboard manual. (pg18 under graphics card)
ftp://174.142.97.10/manual/ConRoe945G-DVI.pdf
I can see a DVI port apart from my VGA port in my pc.
After I get that part right can I run extend my tasbar and desktop onto that monitor.
I have a Dell Lattitude C840 laptop with an Nvidia video card installed by
Dell.
Whenever I plug into a LCD projector and activate my external monitor the
dual monitor feature comes on and I cannot disable it.
Some times I want to run dual monitor with the laptop (such as for
lectures), however, sometimes I want what appears on the laptop screen to be
the same as on the projected image.
I have tried going into the Display Properties and Settings to disable the
second monitor and when I do all that happens is that I go back to only
seeing my laptop's monitor and nothing on the projector. When I activate
the external monitor the dual monitor feature kicks on again.
It never used to do this and I am not sure what changed on my system.
suggestions?
I currently have Windows 7 Ultimate (64Bit) installed on the primary hard drive but my question is will Windows XP work ok along with Windows 7 being installed as well like XP being on the same hard drive? Also could someone tell me what the limitations are for XP as I have 4GB RAM (Dual Channel) as I'll be installing the 32Bit of XP.
Also would XP crash at all with the high specs I'm running ? as I've overclocked my processor to 3.52GHz or doesn't the processor play a role in the stability of XP ?
During a typical dual-boot start-up, Windows provides you with a menu that allows for the selection of the desired O/S. However, after hibernating and restarting, the boot sequence DOES NOT GIVE YOU THIS OPTION! You can force things using the F8 key, but that simply generates a screen with two choices - continue with restart from hibernation, or delete the hibernation data and go to the O/S selection menu
View 5 Replies View RelatedI am trying to figure out how to dual boot Windows 2000 and Windows ME? I know that you can partition your drive but is there a way to dual boot using a Master/ slave drive?
View 3 Replies View RelatedI am thinking of running windows xp and linux on the same hard drive. I know I load windows first, but is there a boot loader that will allow me to choose which os I want to load up at start up?
View 4 Replies View RelatedI've gotten to where I can't stand windows for very long at all, and want to run Linux most of the time on my desktop. The catch being, my desktop is my gaming machine. So, is there any performance hit you take when dual booting a machine? Do the extra partitions hurt anything?
View 3 Replies View RelatedI was one of the many millions of Vista Beta testers out there, dual-booting on my wife's machine with XP Pro and Vista.
After awhile, I really got tired of Vista and I think it's a POS, so I stopped running it. When I installed the OS, I had it on its own partition on the HDD. Xp, naturally, was on a partition of its own as well.
What I did was to delete the Vista partition. But when I boot the system, I still see the "Boot into Vista or XP" screen
On my PC I can boot to an upgraded XP (which was 2000 and is on c:winnt)
and a new installation of XP (on c:windows). I'm having trouble with the XP
installation (that was upgraded from 2000) and I want to delete it. Do I
only need to delete the c:winnt directory and the entry from the boot
manager?
I don't want to refotmat the drive because I have lots of personal stuff
scattered everywhere and I don't want to do a backup.The new XP installation is working great, and I want to keep it. And I want to erase the old installation since it was Windows 2000 which I upgraded to XP.
I'm having problems dual booting XP with Vista. My first problem is that I can't see the space I create from when I shrink the volume on the XP install screen. I have 2 HDs, both over the 137 GB limit (or whatever it is) so I assume it may be related to that. Also the main HD has a separate partition for Vista.
I don't really use the one HD so I was going to just install XP on that and be done with it. Well when I went to do that, it said that it couldn't recognize the formatting on the C drive or it may be damaged and would need to reformat it to continue. I canceled out of it and then my pc wouldn't boot. I had to put the Vista cd in to repair it
I'm thinking about unplugging the C drive and then trying again. Or would that cause problems when I plugged it back in?