I have WinXP Home SP2 but am not sure when this started and why, but there is absolutly nothing in the Device Manager listing its BLANK. I have read this link, and I do have Plug and Play selected for auto and it is active. I even de-selected rebooted, then selected again and re-booted but to no avail.
View 4 RepliesWhy is my device manager blank?
View 10 Replies View RelatedThere are a few things that contributed to the leadup to me losing my Device Manager and sound. First, about 3 weeks ago, I bought 2 sticks of Mushkin EM3200 DDR RAM (two 1GB sticks; 2GB total). Installed it, and it disagreed with my board in a big way (apparently it was the voltages or timings). I managed to get as far as "Verifying DMI Pool Data..." before I got one of two error messages: "NTLDR is missing. Press Ctrl+Alt+Del to restart." or "Windows failed to load because the System32 folder is corrupt or missing." In each case, I popped in my Windows XP disc and fixed the boot record from the recovery console (I did not restore the MBR), and it booted right in.
At the time, Windows booted up just fine, but lately I've been having some funky problems. I've got one SATA drive (partitioned into two) which is my boot drive and one IDE drive that I just use for storage. Sometimes, with my IDE drive plugged in on boot, I can't get Windows to load by any means. Sometimes it boots just fine. When it boots fine, and I go into "My Computer" (either via the Start Menu or the icon on the desktop) it takes about 20-30 seconds to actually display anything (I get either the flashlight-over-folder animation or it just doesn't load). With my IDE drive unplugged, I get no such issues.
As well, the first couple of times I restored the boot record, I had no issues with sound at all. Then suddenly Windows started saying I had no sound device (my volume icon had disappeared, and the "Sounds and Audio Devices" menu in the Control Panel showed no output/playback device) although I clearly do have one. The weird thing is, I still got sound. Then I updated my sound card drivers (it's onboard sound; Realtek AC'97, pretty standard fare) and lost sound completely. All I get now is motherboard/PC speaker beeps. So I attempted to check the Device Manager to see if maybe there was just a device conflict. I say attempted because my Device Manager was completely blank. And I mean completely. All it showed was the title bar, menu buttons, and a white page. Nothing else. Zip.Just ran out to work and got an Audigy for $30 thinking it may just have been my onboard sound kicking the bucket. Installed it, booted up and tried to install the drivers. The driver installation program detected no Audigy in my machine (and I thought it wouldn't because Windows didn't pop up with the little "Found New Hardware Wizard" when I booted).
I have lost my device manager when i click on device manager it opens a blank box with no devices in it help plz i also after finding this i decided to try and format xp home i get the message saying the windows vertion i have is newer than the vertion on disc.
View 7 Replies View RelatedMy task manager is completely fine except that in the Processes tab the big white area what should list all the process is just gray... just a continuation of the background. (I use a gray color for the toolbar and windows instead of the blue bubbly thing that is default.)If I am confusing I have a screenshot to show anyone... but I'm not allowed to post links.
View 6 Replies View RelatedI have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies View RelatedI had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies View RelatedRunning Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies View RelatedI gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies View RelatedI had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies View RelatedI have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies View RelatedA friend of mine has a 4 yr. old PC running XP Home with 128Mb of memory. He's had problems with programs aborting recently. I tried to run Device Manager to make sure there were no issues there. It briefly brought the screen up, then it went away. The same thing happened to Task Manager when I tried to see what was running and how much memory was being used. Anybody ever see this behavior before? I might try installing a memory cleaner pgm (ie. Memturbo), but I'm not sure I would even be able to get it to run. The hard drive amd memory seem to have no errors.
View 4 Replies View RelatedLast night I installed ATiTool 0.24 over my 0.25 version (stupidly). I also did a BIOS update and installed Cat6.3 and then AVIVO converter. When I rebooted, I had this new PCI device requiring a driver,but it's an unknown device and doing an auto update helped me.I can't get rid of this pesky PCI device (tried uninstalling but Windows detects it again after restart/boot-up). All my stuff is working, so I don't know where this critter came from?
View 1 Replies View RelatedI have a huge problem with two unknown devices in my "Device Manager" after formating and reinstalling fresh copy of Win Xp Pro.In my "Device Manager" there is two lines with Unknown devices.
View 10 Replies View RelatedI'm using XP SP3 Home Gateway desktop My device Manager has nothing in it. I don't know when it quit showing. I have checked Bios plug&Play, and it is set in Auto. I am also getting an error stating my recovery D: is running out of disk space.
View 2 Replies View RelatedMy computer cannot detect any cd's in my DVD or CD drive. When I open Device Manager the CD/DVD devices have an error. This error: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41) Click Troubleshoot to start the troubleshooter for this device.When I run the DriverScan it simply doesn't even have an entry for the drives, probably since it thinks it doesn't even exist at the moment.
View 5 Replies View RelatedAnyone know how I can rename a device in device manager, (or the registry), so it doesn't show #2 after the device.I used the leadtek driver uninstall tool last night. And it removed the drivers I had for this Leadtek Deluxe tuner alright.BUT it also renamed my onboard Gigabit LAN (onboard) to #2 my scanner to #2,
and removed my Nvidia drivers for the video card.And reverted the videocard drivers to MS Nvidia drivers.I managed to fix the scanner entry by uninstalling the drivers, then rebooting and reinstalling the drivers.And I managed to fix the videocard drivers, by reinstalling the Nvidia drivers.So, yup, anyone have any idea how I can change the board LAN, so it doesnt have #2 after it? sing XP Pro SP2
My device manager is gone! This is a friends computer(all computer specs given are for the computer I am speaking of in this post), so I am not aware of any changes they may have made and I also don't know how long it has been gone. When I go into my control panel / system / hardware / device manager It brings up an internet explorer screen that says the following:I also tried running a Windows search for "Device Manager" and it came back blank. Does anyone have any ideas how a device manager can disappear? I found other posts about Device Managers being empty but no problems quite like mine.
View 6 Replies View RelatedIt opens but there is nothing is in the box. Is there a SFC program for XP that might restore it, or other options?
View 6 Replies View RelatedThere is an article in this month's PC World "Fast Windows Fixes". The first of the fixes suggests that computer performance can be slowed because drivers for devices you no longer have are still being loaded. It provides a way to ensure that Device Manager also lists drivers for devices that are not currently connected, so I set it to do that.I found no device drivers loaded for anything not connected to my system, but DID find what appears to be a strange situation. Under Processors, my CPU is listed TWO times. The properties for both are identical. It looks like one should be deleted (I only have one CPU on the mobo, an Intel P4 Prescott running at 3.0GHz). But this is the MOTHER OF ALL DEVICES on a computer, so before I delete one of the entries, I want to check to see if it's supposed to have two entries. Can I delete one or should both be there?
I think this may have happened because about 10 days ago, I did a FULL reformat on my HD and reinstalled Windows and all 85 updates since the creation of my Windows CD. I also loaded drivers from other CD's that came with the PC, like my Marvell Ethernet card, Soundmax onboard audio, etc., AND the Asus CD containing the Intel 875/865 chipset drivers. I'm wondering if well before I loaded the latter, that Windows already loaded those drivers and the CD loaded them again. BTW, the driver dates in each entry for the CPU in Device Manager is 4/1/04.
Does anybody knwo how to get to Device Manager in XP.
View 14 Replies View RelatedHow can I put the shortcut to Device Manager (not System) on the desktop?
View 1 Replies View RelatedEvery time i try to access the the device manager from the system properties,i get and error.[IMG][/IMG] then i get this window [IMG][/IMG].
View 4 Replies View Relatedga-965p-s3 motherboard, intel core 2 duo e6400 processor. cpu does not show up in device manager and my computer is listed as a standard pc instead of an acpi multiprocessor.
View 2 Replies View RelatedWhen I open my device manager on my dell computer I do not see any devices.
View 2 Replies View RelatedI was working with tech service to get my wireless router back up and running. after control panel, system, device manager would not come up. or if i tried again and again it would pop up and disappear.
View 3 Replies View RelatedI just reinstalled windows and it doesnt show any CD rom in my device manager. Ive run the "repair" module of Windows XP but it is still the same. I have heaps of software I need to install (including office)
View 4 Replies View RelatedI have XP and when I open my device manager, no devices are shown at all. This is not corrected by the usual microsoft help (i.e set services plug/play to automatic).
View 1 Replies View RelatedI tried uninstalling the USB controllers from the Device manager restarting my computer, and waiting for the pc to re-install the devices itself. Unfortunatly, nothing happens. It DOES find the devices, it DOES reinstall everything, but when i plug in even the mouse, i get the same error msg. The usb ports are named "Unknown Devices" and when i check their properties, the have no drivers installed.
View 4 Replies View RelatedThe Data Transfer status on my HDDs was PIO mode and I wanted to make it DMA so that my access speeds become faster. All I did was update my Primary IDE Drivers. They got updated and DMA mode was enabled. But during this I dont know what happened, but my device manager no longer displays Universal Serial Bus Controllers. The entire thread has disappeared (it doesent show up even when I do "Show hidden devices").
View 8 Replies View RelatedI ran across this in my device manager and I am not sure what Fips.sys is for. I tried to update driver.....no luck. I also tried to uninstall and reinstall no luck.
View 2 Replies View Related