I have an HP media center M7360N desktop with a Pentium D dual core, 4gb ram and a Ge Force 6200 SE card running 220.127.116.114 drivers. I get this screen mess sometimes when on the web and on the desktop.
-Running my PC with a Radeon HD 7700 on Windows 8, main display is monitor in DVI port, secondary display is HDMI running to my LG TV for playing videos (only enabled some of the time in AMD Catalyst Control Center under "Desktop Management>Creating and Arranging Desktops")
-Normally, I enable the 2nd desktop (my TV) through the HDMI output of my video card easily. However, about a week ago I ran into an issue: while the OS detected the display, it only recognized it as a monitor in 640x480 resolution.
-I tried several things to fix the display issue, but was finally successful by changing the HDMI cable connected to the TV side to the second HDMI port on the back of the TV (that is, going from HDMI 1 to HDMI 2). This fixed the issue immediately.
-Good till yesterday. Now the HDMI 2 is no longer detected as a valid display. HDMI 1 (the original connected port) is still detectable, but it's still having the 640x480 max resolution issue (and no audio output as well).
-HDMI 3 on the TV currently works, but that is the final HDMI port on the TV, and I don't want to continue moving the cable without resolving the issue. I have tested the TV HDMI 1 and HDMI 2 ports with other hardware, and they seem to be working without fault with a DVD player or Media box, so I doubt the issue is surrounding my TV.
I am on my work computer, a DELL desktop with Windows 8.1, and I've been using a dual monitor setup for months, both with Windows 8 and 8.1. One monitor is connected via the VGA input, and the other is through a VGA to HDMI adapter. Again, they've been working flawlessly for months. It was a plug 'n play setup that took a minute and never had an issue.
I came in today and the second screen was blank. In the screen setup menu it recognized it and allowed me to adjust between extending, mirroring, etc. But after I unplugged it and plugged it back in, it no longer recognizes it. It simply cannot find a second monitor plugged in. Both screens work when plugged directly into the VGA port separately but not when plugged in the way they've worked for months.
I just purchased a new windows 8 PC. I was attempting to hook the computer up to my tv through hdmi (the pc has no VGA input) and when I went through the normal paces to put the display on my tv (display desktop only on 2), the signal did not transfer and there is no display on either my tv or pc! how to revert the display back to my pc monitor without being able to see anything? Acer support was less than useful. It's an acer aspire z3-605 all-in-one pc.
I have a gateway NE56R41u. With that aside, today i played the sims 3 when it has a warning about my graphics card or whatever, so i went to my screen resolution to see if i can fix the problem. Unfortunately, the place where i can choose what my resolution is greyed out, so i cannot change a thing. Heres a picture .....
I installed windows 8 on my pc and it doesn't use the whole screen. There's a margin all the way around the screen. I have a 23" 1080p display and AMD Radeon 7450 graphics card.Also, OpenGL is not working at all, for anything.
I know how to select the second screen options, however, my Surface Pro and our Samsung Laptop both running Windows 8 cannot detect a second monitor/screen. We are connecting via the HDMI port, but it will not display no matter what option we choose nor whether we run it from the desktop or apps. This is what we use for work to display presentations for clients.
Basically my screens kinda broken. 2 flies kept passing around me and I tried swatting it away with my hand, and when I did that my earphonescaught me hand and one of the buds hit my screen and this happened.. I took a picture of it to see what it looks like..
I installed windows 8 on an Acer aspire 8320TG with AMD HD 6370 graphics card. This laptop is according to Acer not suitable for windows 8 but it worked. However, my screen is extended to the right and I can't switch this off. Since I don't have a second monitor I only notice this when my mouse sometimes gets lost or when I make a screenshot. I tried changing some settings in the "screen resolution" dialogue, without success. Am I just not finding the right settings for that or is it some compatibility-issue?
I installed an EVGA GT630 1GB but it doenst work properly with Windows 8 Pro x64. All I have is a black screen, but the computer isnt freezing, 'cos I can hear the logon and shutdown sounds. I've tested it on Server 2003 R2 x64 (XPDM) and it worked just fine.
I'm using Windows 8.1pro,also I use HDMI to sometime output video files on a TV screen,that works fine. HDMI cable is always plugged in,primary display is set to my computer monitor.I don't always use TV screen and because of existing cable connection my OS extends image to second screen and my mouse cursor alway disappear when it goes to borders,that is an annoying situation,is there a way to disable/eanble extend display on second screen without unplug the cable,just like I can set default output sound device (computer/hdmi sound) ?
I am using a Ideapad Z580 with Windows 8.1 64 bit. All was working fine. But I formatted the C drive and reinstalled my Windows 8.1 OS. Then I installed all my drivers. After a reboot the screen started to jump(flickering).The top part of the screen(small portion) is appearing and disappearing in the bottom area. I tried to change the refresh rate.But it is locked in 60,and no other options are available.
i finally worked out how to get full screen on my tv when connected via hdmi from laptop, which is great. only now found that when i shut the laptop screen i lose the full screen on the tele and it sizes down to about 50% with the black boarder. on my laptop control panel "what does computer do when i shut the lid" i have selected "do nothing" on both wired and battery modes. How I can close the lid and keep full screen? (the tv is a celcus full hd smart something or other and laptop is hp running windows 8.1,
I have a laptop where my LCD is broken on the left side, but the right side works fine. Is there a way I can change my display to only show on the right side? I've managed to make the display horizontally smaller, but I can't figure out how to change the center to the right side. This is annoying because I have to re-size every window every time I open it, and then I have to constantly scroll back and forth on web pages. I'd rather be able to maximize and have it only on the right side. See the attached picture to see what I'm talking about.
My netbook(Samsung NC110 with 1024*600 Screen Resolution and Intel GMA 3150) is running Windows 8.1 x64 now. I want to use all features of Windows 8, so i want to set Custom resoltion like 1366*768. I was trying to change some keys in the regedit, but the picture was very bad, cause my screen is 16:9, and 1024*768 or 1152*864 resolutions is 4:3. I want to get some utility to set Custom Resolutions, that bigger that real resolution of my display.
I have a AMD 5650 that shows a black bar that is 1 inch on the left and right and about .5 inches on the bottom on HDMI. I've used the drivers that Microsoft provided and also beta drivers from AMD from Febuary 2014, nothing seems to work. I've taken a picture, I've underlined where the back bars are in red.
For last couple days I've been going through a minor computer issue. I wasn't doing anything special, I just turned the computer off. And the next day the problem occured; After bios and Windows 8 loading screen ( the little dots going round, just below the windows 8 icon ) my screen goes black and there's no signal to the display. I've already tried formatting my hdd and installing windows 8, also tried doing Reset option, from the Windows 8 troubleshot system. I can't access my Safe Mode, because it tells that Windows can't finish the installation in safe mode ( After installing the new system I format all the data and it goes just fine until the windows icon and "Preparin your devices" sign. It goes 100% and gets black again.
I am running Microsoft Office Home & Student 2010 on Windows 8.1 Preview.
Yesterday, I had to purchase a new desktop PC monitor. It's a Samsung S22C300H .
The resolution is higher than my previous monitor. As a result, when I open Microsoft Word and have it display in Print Layout mode, the page has shifted from the center of the screen to the far left.
(The resolution on the new monitor is 1920 x 1080.)
I've been used to the page being in the center of the screen for the past 20 years! I've lowered the resolution, which did center the page in Word, but the resolution is nowhere near as sharp as the high resolution mode.
Is there a way to get the Print Layout page in Word to be centered on the screen in this high resolution? If so, what is the procedure?
My wife has a nice new VAIO laptop. We connect it to a Samsung TV with an HDMI cable. Initially there were video artifacts on the TV screen, but after some fiddling they seemed to go away. Today they have returned. I have tried another HDMI cable and it didn't work.
The artifacts are only on the TV screen and not on the laptop display. They cannot be captured with a screenshot (I just tried this and am posting from my computer).
The web search picture (HDMI.jpg) shows small vertical lines in a row after some of the text.
Trying to address a different problem, Gigabyte suggested that I update the BIOS on my GA-F2A88X-D3H mb from F1 to F3. In addition to not solving the problem, after I updated the image displayed on my monitor--Dell 2209 WA--doesn't fill the screen. Everything's there, but the image stops about 3.5" short of the right bezel.
Using AMD's Catalyst Control Center hasn't worked. I've read some posts about a similar--the same?--issue that suggest changing a setting in "My Flat Panel Display." But I see only "My VGA Display," with no option for over- or under-scanning.
The image does display fully on rebooting--I see the Gigabyte UltraDurable logo, and on entering BIOS instead of going into Windows 8.1 (64-bit).
Since first writing this, I've tried the monitor's menu and other buttons without success.
Is it worth getting a DVI-D to DVI-D cable to connect digitally, in place of the current VGA connection?
Does it signify that the monitor reports a screen resolution exceeding its supposed maximum of 1680 x 1050, namely, 1920 x 1080? In both Windows screen resolution and AMD CCC, I'm unable to set a resolution above 1680 x 1050, and setting lower resolutions doesn't work.
To my own stupidity I decided to update my computer from Windows 8 to 8.1, every thing would be fine if not for the fact that my screen is now stuck as a letterbox.
The native for my monitor is 1920-1080 and was what I was running at pre-update, after restarting, my screen is confined to a letterbox setting. Changing the resolution does nothing, when looking for a solution I came across a post from this thread:
8.1 upgrade - generic video driver problem
I've got the same graphics card as the OP and have found the same events. My question is what did he mean when he said
"I deleted the AMD leaf-item (Control Panel, Display adapters, AMD Radeon HD 7650D)and rebooted the system." in post 3.
Did he go ahead and un-install it? Clarification on what he exactly done would be great.
btw, if I did go ahead and un-install my graphics card like the OP originally suggested, would it reinstall on restart?
My new Acer laptop has very disappointing screen and video quality. The screen resolution is maxed-out at 1366 x 768 with Intel HD Graphics 4000. Those specs should be just fine for great visuals. My old desktop didn't come close to that but I could watch Youtube videos very well with no pixeling of image. Acer tech support said "new graphics driver download" and I did that , to no avail. Setting adjustments etc.? My wife's 3 year old Acer has better screen quality than my new one.
I have Lenovo G580 running 8.1 with intel HD4000 and Nvidia Geforce 610 & Intel CoreI5 3210 2.5GHZ 3rd generation the problem occurs after few days from updating the Intel video card which is simply i can't change the screen brightness whether using the [function+uparrow ] or control panel, it works well when i roll back the driver so am I stuck with the old driver which i can't update or what?
I'm running Vista 64 and tried to upgrade to win 8. It went well enough, but my screen resolution became very poor. I have AMD Radeon X1250 graphics and can't find a driver that will work on Win 8, so I reverted to Vista. But I really want to run Win 8.
i installed windows 8 on my new pc who includes Shappire 7870 xt boost and monitor Samsung T220. whether i turned off the monitor manually or it turns off automatic by power saver, sometimes the monitor shows only black screen. The monitor does turns on, it's light turn on, but all i get is black screen.
i also have I5 4570 and Gigabyte GA-B85M-D3H.after i installed windows, i installed the motherboard drivers, includes Intel HD Graphics 4600. Could it conflicts with the ATI's driver?
also, when i connect the monitor to the motherboard it works fine (so far at least). but games doesn't run smoothly.
The other day my son stepped on my laptop and messed up the screen. Now when it starts up I get red lines going across the screen, but can still see the bios info and the windows logo and spinning dots when Windows loads just fine, however when Windows starts I just have a blank screen. Obviously the screen was damaged, but it seems to display the lower resolution okay. I just can't lower the resolution in Windows since I can't see what I'm doing. Plugging in an external monitor doesn't work, there's no output there. Is there way to change the resolution settings if I take it the hdd and plug it into another computer as an external drive? The laptop is an Intel cpu and my other machine is an AMD cpu, so I don't think just trying to boot the laptop hard drive in the desktop would work.