Active Windows Deselect And Then Immediately Reselect
Feb 28, 2014
Over the past few months I have been unable to us any programs that require fullscreen and it is very hard to surf the internet or type anything because my computer keeps deselecting and reselecting my active window. I have tried disabling the touch pad and unplugging my external mouse so that is not a problem. I have also ran virus scan after virus scan and nothing has come up. The strangest thing is that this only happens on my account(adminitrator) and not my father's account(guest). I am running Webroot as my antivirus.
View 3 Replies
ADVERTISEMENT
Sep 11, 2013
I am using Windows Defender in Windows 8. I see that the Defender becomes only active after a few minutes.
If the Defender is activated before than every thing is in red , and unable to start it. The fault code is than 0x80070426.
But as explained already after a few minutes everthing is ok.
Question:
*does this mean that during that time one is not protected?
*maybe is it technically as such?
View 9 Replies
View Related
Feb 10, 2014
I have booted in safe mode, and it seems to work fine. But, when I do a clean boot (disabling all non-windows startup services and programs), it still logs me out.
View 4 Replies
View Related
Dec 1, 2013
Windows 8.1 all working fine, but when I hibernate it then resumes again seconds later for no apparent reason
Tried powercfg /lastwake but it is not telling me what caused it to wake
What I can do to stop this?
View 9 Replies
View Related
Dec 29, 2013
I have an old desktop running windows 7 (spec below). I had a 60GB partition and figured I'd install 8.1. I downloaded 8.1, proceeded to the install and everything went fine.
Upon reboot the desktop loaded to the windows 8 icon and immediately rebooted itself, and then launched into windows 8 automatic repair (without showing OS choice beforehand).
The pc has been stuck in this loop and I cant get out of it. I've attempted to reinstall a few times but it's the same story. I ran a disk check but no problems were found.
Windows 7 runs fine and has done for years, just a little sluggish as it needs some cleaning.
Spec:
Mobo: nForce M-a
CPU: Athlon X2 3800+
GPU: GeForce 8500 GT
2GB ram
View 2 Replies
View Related
May 5, 2014
With Windows 8.1 Update 1 Enterprise 64 bit, how do I make sure that, when I start the computer, the Login Screen is displayed immediately?
View 1 Replies
View Related
Nov 4, 2013
When i right click on My Computer icon and click Properties, System Properties window open for a second and immediately closes. I have the same problem even if i try to open System Properties from Control Panel. How do i solve this problem without doing system restore. Keyboard volume keys also not working
View 6 Replies
View Related
Oct 20, 2013
having installed and configured all the software I need, I felt almost ready and relieved to finally create a backup image of my system. However, I have just realised that most built-in Metro Apps have stopped working.
In detail, Weather, Maps, Mail, Skype, Calendar, Contact, Stocks (and probably few more) do not work, i.e., when I click-open them, there is the short animation in which the App symbol is magnified to full screen, and then immediately afterwards I am sent back to the Metro interface. However, the apps do still appear in the Metro Apps' taskbar on the left side of the screen. Re-Opening them from there leads gives the same result.
Very few apps work, like Skydrive, Photos and Store.
I can confirm that I neither had this issue with Windows 8 nor right after my Windows 8.1 installation, which is when I checked Metro apps for the last time.
What settings in the meantime have caused this disruption, I can only say that I have not done any real work with the computer since the fresh install but merely installed and configured everything to my specifications.
Just for the sake of ruling out some possible causes, I can confirm that: I have no third-party firewall or antivirus programs installed; that I have no nvidia or ATI/AMD graphics card, just the Intel HD 4000 onboard graphics; and that I use the most recent drivers everywhere.
I have already read Windows Store Apps Troubleshooter - Fix Apps in Windows 8 and gone through most of the points, except the refresh install, which I would like to avoid since this is a newly installed computer.
The following errors are reported in the application event log of Windows:
1) Event id 10: "Fehler beim Laden der Anwendungseinstellungen for Paket "Microsoft.BingMaps_8wekyb3d8bbwe". Fehlercode: 5" This is the original German message, translated to english this means:
"Error loading applications settings for package "...". Error code: 5"
I get this type of error for every app I launch, and a few more errors like:
2) Event id 5973: "Translated: The following error occurred while activating the app "...": The remote procedure call failed. You can find more information in the protocoll/log "Microsoft-Windows-TWinUI/Idle""
3) Event id 1000: "Name der fehlerhaften Anwendung: Map.exe, Version: 2.0.2210.2336, Zeitstempel: 0x5257124f
Name des fehlerhaften Moduls: Windows.UI.Xaml.dll, Version: 6.3.9600.16408, Zeitstempel: 0x523d4b78
Ausnahmecode: 0xc000027b
Fehleroffset: 0x0000000000a4f30a
ID des fehlerhaften Prozesses: 0x16bc
[Code] .....
View 9 Replies
View Related
Aug 11, 2014
I've had windows 8 for a bit, but since I've installed the OS not a single one of my windows apps will work. I've tried a lot of options and none fix it. I will open up a app ( windows store app or PC settings for example) and it will open and display the icon and blown up screen then immediately minimizes and will not allow me to maximize it. I'm so tired of it! I can't download any new apps or update my old ones let alone use any of them. I ran a basic trouble shoot through Microsoft and it came up at one point saying I need a Microsoft account. which is crazy because I've put in my CD key like 50 times and registered it when I put the OS on this computer . Windows 8.1
View 3 Replies
View Related
Apr 20, 2013
Which partition should be active partition in windows 8....out these 5 partitions C:OS, pbr image , WINRETOOLS ,DIAGS and ESP??
View 3 Replies
View Related
Jan 16, 2014
I've been having an issue with my Acer S7-391. I bought the Windows 8 machine in December, and the majority of the time when I start it up in the morning, it doesn't boot properly - it hangs on a black screen for ages. I then have to hit the off button and boot it back up again and, sometimes, it boots after having to go through a system repair. Also, sometimes it does boot properly from the get-go without having to jump through hoops - not often though.
Originally I thought it was an issue with me having upgraded to Windows 8.1 shortly after buying the laptop, but having rolled the machine back to Windows 8, the issue prevailed. Through trial and error, though, I've figured out when it does and when it doesn't boot properly (yeah, I'm slow). Basically, it never boots properly when I have a USB mouse/keyboard plugged in. I take them out, boot the machine, and can plug them in again almost immediately and everything works fine. But NEVER does it boot with these devices plugged in from the start.
Here's a photo of it anyway (below).
Any solution here - other than unplugging my USB peripherals on boot - t'
View 2 Replies
View Related
Oct 24, 2012
I know of two ways to search. Neither is working for me. Indexing service is active.
1) Using Modern UI (see screenshot)
Good : finds things including file contents
Bad : Searches cannot be saved. No advanced options like (type of data: file, outlook etc..), size, date...File types associated with Internet Explorer are opened in Modern UI IE not in Desktop IE. Every time a file is opened, the search results vanish.
2) Using Explorer (see screenshot)
Good : It has everything the Modern UI search lacks (advanced options, save searches etc.)
Bad : Doesn't find things (file content wise). For example the file in the screenshot is on my desktop. It takes minutes and then finds nothing.
View 1 Replies
View Related
Mar 18, 2013
I was having a problem since my computer shows "windows cannot delete the active system partition on this disk". How to delete the partition on which i have windows 7 installed.
Here is the screen shot ...
View 2 Replies
View Related
Nov 27, 2013
My active hard drive is failing and I want to assign another HD instead. How do I do this?
View 1 Replies
View Related
Feb 17, 2013
Enable Concurrent Sessions on Windows 7, Windows Vista and Windows XP (Termsrv.dll)
View 2 Replies
View Related
Mar 13, 2014
I've got a bit of an issue though. A few days ago, I went into Control Panel > Clock, Language, and Region > Language and added French as an additional language. I changed the input method for it to US-QWERTY and it offered to download an additional language pack -- which I did.
It decided to set it to my system language upon reboot. As soon as I got back in (which took some time, I'm only just starting French classes! ), I set English back to the system language, uninstalled the French language pack, and removed French as an additional language entirely.
However, something appears to be stuck. Windows still has that language configured even though it does not show in the Control Panel, and when I use IE (Chrome has been freezing lately), my spell check is in French, NOT English -- which is the default language. Resetting IE completely (in the Tools, Advanced menu) did nothing.
Here's a pic (Warning! It's a bit larger than 640x480). You can see the language selection "tool/widget" by the clock, and you can see the dialog that shows English AND French are apparently configured for use, even though the Control Panel window shows only English.
View 3 Replies
View Related
Aug 25, 2014
How to post a screen capture of a full screen Disk Management window as I've done many times before. He said none were marked as Active.
I opened Disk Management (full screen) on my Windows 8.1.1 Pro X64 EFI/GPT system so I could post a screen capture showing him where it would show up.
I was very surprised when there was no Active flag shown anywhere. I know it used to show up.
What happened and when did this change occur. Must have been a Windows Update that screwed it up.
It's still there under Windows 7 on a different computer (BIOS/MBR):
View 2 Replies
View Related
Jul 11, 2013
I have my Lenovo laptop set to sleep when I close the lid. I do so with my windows and tabs active but on waking, they have disappeared.
View 3 Replies
View Related
Jun 18, 2011
in'm trying to enable the Aero on my Nvidia 320 m but i have no uxsms and the problem is : WDM is not actived..
View 2 Replies
View Related
Dec 29, 2013
When I entered recimg/show current in elevated cmd , I get the message : There is no active custom recovery image.
However when I checked disk management , I get the following partitions:
EFI System 50mb
OEM 40mb
Recovery Partition 2GB
OS C 50.12Gb
Recovery Partition 5.42Gb
What are in those 2 Recovery Partitions ? Are they the 2 restore points I created? Why is the second Recovery Partition so much larger than the first?
View 9 Replies
View Related
Aug 27, 2014
At my company we are currently running a server (with Windows Server 2012 R2 Standard), without Active Directory, and we have a bunch of laptops running Windows 8.1 Pro. Now we want to install Dynamics CRM which requires an Active Directory domain.
I am trying to run through every anticipated problem before I do the domain configuration. The last problem that I anticipate is the following:
Our MD's laptop is currently logging in without a Microsoft account (in other words, he uses a standard local user profile in Windows 8.1 Pro). He has a whole lot of data in this profile from a few years of work. So now, when we configure the domain, obviously he will have to sign in using an Active Directory username and password. So question 1 is, is it possible to synchronize the current local (non-Windows Live) account with the domain account? The second question is, how will this affect his data, settings, etc? And the third question is, when he's working from home, without the domain controller to authenticate logins, will he still be able to access his data and profile? In other words, what I'm really asking is, will we be able to kind of "integrate" the Active Directory account and local account as one account, but the authentication is AD based when he's at the office, but local if he's at home?
View 2 Replies
View Related
Oct 22, 2013
have an active Volume license subscription from Microsoft and i want to setup KMS server in my home and want to active all my client machines ( i have about 8 machines with windows starting from Windows 7, Windows 8, 8.1, Office 2010 and 2013). I will be getting more machines in future but wan to go with KMS setup activation
My question here is in my volume service centre i dont see any KMS specific setup key , but i see KMS and MAK keys ( i am guessing KMS key is for client machine). can i use MAK key to activate windows server 2008 R2 and setup KMS server in that machine ?. will microsoft know how many machines i am activating internally in my home network
I know that i need more that 25 machines for KMS to work. I can use KMS emulator and make it 25 count.
View 9 Replies
View Related
Jun 26, 2014
This just started happening recently and I don't know why. Performance monitor doesn't show anything irregular, neither does process monitor.
I've run an sfc scan and chkdsk too as well as updating everything and seeing if disabling av software work but nothing has.
View 4 Replies
View Related
Aug 26, 2014
At my company we are currently running a server (with Windows Server 2012 R2 Standard), without Active Directory, and we have a bunch of laptops running Windows 8.1 Pro. Now we want to install Dynamics CRM which requires an Active Directory domain.
I am trying to run through every anticipated problem before I do the domain configuration. The last problem that I anticipate is the following:
Our MD's laptop is currently logging in without a Microsoft account (in other words, he uses a standard local user profile in Windows 8.1 Pro). He has a whole lot of data in this profile. So now, when we configure the domain, obviously he will have to sign in using an Active Directory username and password. So question 1 is, is it possible to synchronize the current non-Windows Live account with the domain account? And second question is, when he's working from home, without the domain controller to authenticate logins, will he still be able to access his data and profile? In other words, what I'm really asking is, will we be able to kind of integrate the Active Directory account and local account as one account, but the authentication is AD based when he's at the office, but local if he's at home?
View 5 Replies
View Related
Mar 11, 2014
I have installed a new program (Soundswitch) that I want to keep and I need it running in the background. What I don't need is the icon in the notification area. I only use the program's keyboard shortcut and have no need for the GUI. I keep my notification area very clean and only have icons for the three things I actually use in it. Most programs offer a way to disable their own notification icon, but this one does not. And, unfortunately, hiding the icon through the Windows 8 options created another icon (arrow), which I don't want either.
Is there a way that I can keep the program running but have the icon removed from the notification area?
View 6 Replies
View Related
Sep 15, 2014
I experience heavy video/audio stuttering when playing a video or general latencies when downloading a file when connected via LAN/Ethernet NOT when connected via WLAN/Wifi. According to my observations the stuttering only happens when the LAN network driver is somehow busy, which means preloading the video or downloading a file. As soon as the video is chached/loaded or the file is downloaded, the stuttering disappears. So in my opinion it is definetly a driver problem.
I recently updated the LAN driver due to suddenly occuring BSOD. The update fixed the BSODs but now the stuttering appeared. I already tried to switch to other versions of the driver or even use just the Windows driver, but the problem doesn't disappear.
With updating the LAN driver I also updated all the other drivers (BIOS, Soundcard, PCI, Chipset, etc.) because my system was a little outdated. Everything works fine and in games (like Borderlands) everything works like a charm. Just when the LAN driver is busy the CPU has a 90%-100% load. The process causing the CPU load is in these cases not Chrome, it's the System process according to the task manager. Another hint that the driver should be responsible.
The Graphic card is up to date and running on the latest beta driver from AMD (tried the normal driver too, no difference).
LatencyMon showed me that ndis.sys is causing excessive latency.
Malware Scans are negative with Malwarebytes and ADWCleaner.
So as a summary: The problems started when I updated my drivers! But I can't go back to the state before cause I don't have a backup and the restore points already got overwritten by current ones.
What I updated: Practically almost everything that was outdated - used SlimDrivers.. maybe wasn't the best choice..
I remember:
- Chipset driver (not 100% sure but a lot of Intel drivers)
- SATA AHCI Controller
- Various system drivers like:
--- Intel(R) 5 Series/3400 Series Chipset Family PCI...
--- Intel(R) 5 Series/3400 Series-Chipsatzfamilie - Thermosubsystem
--- and a few others
- Audio Realtek driver
- PCI-E-Gigabit-Ethernet-Controller Qualcomm Atheros AR8151(NDIS 6.30)
- Broadcom 802.11n-Netzwerkadapter
What I tried so far:
- Try to go back by restore points --> didn't work
- Deinstall virus scanner --> didn't work
- removed all apps from startup --> didn't work
- tried to identify the causing process with process explorer --> the process causing the cpu load was either system or chrome, but chrome not to much (30-40%) so I guess its driver related..
- tried to switch back to the old drivers by installing the vendor drivers from acer --> didn't work (maybe there are some drivers missing that I updated via SlimDrivers)
What I found out so far:
- The latency and lags don't appear with Wifi/WLAN --> Just when connected via LAN/Ethernet
- The latency and lags appeared after the driver updates --> So nothing to do with malware
- The latency and lags are caused when streaming videos (only in the time when it's loading/downloading) and when downloading bigger files and probably also when loading a website, but not that strong --> So to sum up: Always when the LAN/Ethernet is busy
My LAN card:
PCI-E-Gigabit-Ethernet-Controller Qualcomm Atheros AR8151(NDIS 6.30)
Current driver: 2.1.0.16 from Microsoft
Tried 2.1.0.21 from Atheros too.
My System:
Acer Aspire 7745G
Windows 8.1 64x
Intel Core i5
Mobility Radeon HD 5850
4 GB Ram
SanDisk 128GB SSD
View 9 Replies
View Related
Feb 25, 2013
i have one 750GB hard disk with 8 partition. i installed windows 7 in first partition and windows 8 in second partition. i want to hide windows 8 drive when i boot in windows 7 and hide windows 7 drive when i boot in windows 8. with NeoGrub tools in EasyBCD can do this,
View 1 Replies
View Related
Dec 17, 2013
I lost my restore link to the recovery partition after i installed another version of windows.
This is a ASUS x550L with a pre-installed Windows 8 inside. What i need to do is set my recovery partition as active, boot from there, use that to reformat/re-install windows on drive C. I just dont know how to do it.
Booting Asus recovery partition.
Set boot partition as Active partition.
View 9 Replies
View Related
Apr 15, 2013
I am setting up an image to duplicate on our student laptops this year and have run into a strange problem. Our computers are on a Domain and the image works great but when a new user logs on with their Domain credentials, all of the stock active tiles are blank and unresponsive. We can have the student log out and back in and the tiles all work the second time. Same thing happens every time a new user logs on for the first time.
View 1 Replies
View Related
Sep 23, 2013
I live in an apt building that has freeWIFI. There are about 4 wifi connections Ican switch to when one is lagging. I would like to see the number of usersaccessing each connections.
Is there any freeware system monitoring tool available that will show me #number of users on each wifi connected in my building. I am running Win 8.
View 9 Replies
View Related
Feb 9, 2013
I don't know how I did it but I got both Windows 7 File Recovery and Windows 8 File History active at the same time. I upgraded from Win 7 to 8 Pro and transferred settings so win 7 file recovery was already active, when I tried to turn on win 8 file recovery I got a message saying I cant because win 7 FR was active. So I deactivated win 7 FR then activated win 8 FR, for giggles I went back and turned on win 7 FR and it worked. Now I have both active, from what I have read this was not possible. Did I break my OS or am I just lucky?
View 3 Replies
View Related
