during install (when the monitor turns briefly black and the install sequence starts) my wacom intuos3 turns dead (no mouse movement possible) until i hit "yes" on the respective installer. from then on everything works smoothly as usual.
View 0 RepliesI re-purposed an old work computer into a media server and am trying to install W7 to it. It previously had XP on it and worked fine, except for the onboard NIC. Whenever I tried to use the NIC, the computer would shut down. Luckily I had an external USB wireless adapter which allowed me to bypass the onboard NIC.Now, when trying to install W7, it gets all the files copied/installed, then upon setting everything up, the computer shuts down. I'm guessing the reason for it is the NIC driver is attempting to install itself, but haven't seen it to be certain.Unfortunately, the board, an Intel DG965WH, is out of warranty and I can't afford a new board. I don't think I can disable the NIC in the bios, or with jumpers on the board (though don't quote me on that 2nd thought).Anyway, trying to install W7 again, and I'm going to try to browse to the Linksys adapter's driver if prompted. Maybe that will bypass the onboard NIC.
View 1 Replies View RelatedOn a Dell desktop with pre-installed Windows 7, due to a bad HD, I bought and installed a full retail version of Windows 7. Now the ethernet port is dead.
View 8 Replies View RelatedI just put my new PC together today. I installed Windows 7 ok, went to restart, and about 10 seconds after the Windows logo comes up, it all turns off.
Components are...
MB: GB P55A-UD4P
CPU: i5-750
RAM: Kingston DDR3-2000 4GB
GPU: GB GTX260 OC
PSU: Enermax Infiniti 650w
1 HDD
my Toshiba laptop screen stays black, my laptop turns on but the screen stays black, I have tried many steps and none has proved, I wonder if it has to do with a cable or is the screen that needs to be replaced.
View 5 Replies View RelatedI've got a very disturbing issue with my Wacom Intuos4 tablet. Most of the time when I restart or power up my computer I have to reinstall my tablet. For some reason the drivers for the tablet just falls out. It is REALLY annoying! All my settings are still there after I've reinstalled it. So Win just don't recognise it anymore. Another restart or shut down/power up doesn't help. I have to reinstall.
View 6 Replies View RelatedI had trouble with Windows 7 freezing up on start up
and I finally found out that the driver which I installed to run my Wacom
Bamboo Pen tablet was causing the trouble. I am able to use it with
Windows 7 support but without the real drivers I cannot configure it properly
as I have 2 monitors and so I am unable to restrict it to my primary monitor.
Anyway I can now use Windows 7 without anymore probs which is great.
Hope this may help others using Wacom pen tablets.
7 is going to be a great OS thanks Microsoft.
I use Wacom Intuos 2 graphics tablet which works fine, except for one thing. I have to install the driver every time I do a cold boot of my PC! I used to have a similar problem under Vista but with that, simply unplugging and re-plugging the USB connector resulted in the tablet being recognised.
Now, as I said, I have to reinstall the driver. I am using the latest one available.
I have an HP laptop with Win 7 Home Premium. When I boot with my new Wacom Intuos3 tablet plugged in (USB), the system hangs after the Windows logo loads. (Dark blue screen). I have to do a hard reset to get the computer to restart. Windows boots fine with the tablet UNPLUGGED. The tablet works if plugged in AFTER Windows is loaded. I have tried all the available drivers for this tablet. Changing the drivers didn't affect the function of the tablet or eliminate the hangup at boot. Wacom says the issue is not with their driver, but with how Windows is loading the services. I have turned off "tablet pc input" in Services; "Wacom tablet service" is turned on. (Wacom tech didn't think these services conflicted but some had posted the suggestion to turn windows tablet pc service off.) Although I can use my tablet, it's a real pain to have to unplug at each reboot.
View 9 Replies View Relatedis it possible to run wacom serial graphic tablet on a i5 motherboard if so how
View 2 Replies View Relatedi am able to turn my computer on for a few seconds but then it automatically shuts itself off after a few seconds but the thing is after letting it sit for a couple seconds it says something about how the clocks on my processor have been overclocked too high and asks if it wants me to restore them, so i do that and then the computer works fine, but then when i turn it off and turn it back on it does the exact same thing until i get that message again.i've tried manually reducing the clocks on my cpu even though they were already at stock clocks and that didnt work
system specs:
windows 7 ultimate 64bit
intel core 2 quad q6600 @ 2.4ghz standard clocks
4gb ddr2-800 ram
ati hd 4760 1gb ddr3
(Problem 1)I've lost the driver after restart,
(Problem 2)got really annoyed with the cursor rings
(Problem 3)and experienced slow pen action.
Working for severeral days with these issues, uninstalling, reinstalling, deleting preferenses for the wacom intous 3 tablet, delaying the wacom driver load... and so on.., did not help that much. Nothing I tried worked out completely perfect. Therefore I made a decision to follow the procedure below, - to solve all of the problems mentioned, and it's working!I write this to hopefully spare some people the unnecessary time and frustrations with these problems. Win 7 are equipped with software for Tablets PC's, which's interferring/messing up the wacom tablet driver.(The lost driver)I was thinking; do I need the Tablet PC in Win 7? Answer: No! I have a Notebook.But it didn`t work out just to disable the Tablet PC in "Computer management, Services." (Right click on My Computer, Manage, Services And Applications, Services)is drastic and pretty time consuming, but for me absolute necessary for a permanent fix.I saved all my settings and files, reformatted and reinstalled Windows 7 and all the programs.
I followed this algoritm:Reinstalled Windows 7 First: I did not plug in the wacom tablet, and did not install the wacom drivers at this point.Installed all my programs EXCEPT Wacom drivers, did all the updates for windows and my programs except anything regarding the wacom tablet (The cursor rings)cursor rings from the pen following this article: Configuring Windows 7 and your Pressure-Sensitive tablet to avoid cursor(The driver)Restarted the computer Disabled the Tablet PC in "Computer management, Services," because I don`t need this application at all. (Double click on "Tablet PC" or right click / properties, disabling)Restarted the computer to be safe, but I could possibly just stop the service Now, I installed the wacom driver, making sure I installed the driver BEFORE plugging the tablet. I used the current driver version Wacom pro615-3a_int.exe.Then I checked to see if there was any windows update to my wacom tablet, (control panel, windows updates) but there wasn`t any. If there would be one, I will make sure to disable it, because I don`t want Microsoft to mess with my tablet!(The slow pen action)I changed the settings in Control panel for Pen and Touch:Selected the Flics tab and
- deselected "Use Flicks to perform common actions quickly and easily"
- deselected "Display flicks icon in the notifications area"Selected the Handwriting tab and
- Selected "Don`t use automatic learning, and delete any previously collected data"Hitted the OK button. (These settings will only slow down the pen action, despite what it says)
I have to critiscize The Microsofts, as said - giving me severeal days with frustration and destroyed productivity?
I have been using a program called Raw Therapee. I downloaded a new version and on installing it quit saying the old version must be removed. I could not find it listed in Revo Unistaller Pro, so I did a forced uninstall with the location of the main executable. This removed a lot of stuff. I checked the program folder and the folder and many files were still there, so I deleted them. I did a CCleaner in between and after. I then unhide and show system files and deleted the folders in the Appdata of main user and admin account, couldn't find it anywhere else.
CCleaner again and reboot. Went to install the new version again and it claimed that the old version was still installed. I did a search for *aw The* and found an entry in the hidden Program Data Folder. In the Admin account it will not let me in this folder to delete any remnants of the old version of Raw Therapee.
I have a Compaq-CQ5302F,when I turne it on it goes right back off. The motherboard is Pegatron(Evans)?
View 2 Replies View RelatedAnyone else experiencing a problem with Hotmail? I cannot sign in, tried to access Hotmail (via Outlook) at 16:39 GMT. Hotmail message was "Sorry Hotmail has a problem." Downer, have to email several people today.
View 4 Replies View Relatedhow test CPU is dead or not? I have i5 750 and whit it My working PC doesn't boot up, when I set it
View 2 Replies View RelatedI just bought the new Sony Vaio Z series.After 3 days it has a pixel issue:On a white background, the pixel is red On a lighter blue background, the pixel is black On a green background, the pixel is black On a red, dark blue or black background, the pixel seems normal (the right color and blends in with the rest as it should)Is this a dead or stuck pixel?
View 8 Replies View RelatedMy 3-year-old $300 Gateway desktop does not respond to the power switch which tests good. Rather than investing any more time or any money in this machine, I'm going to buy a new one.Can I just replace the new HD with the HD from the old PC so that it will be the boot drive?If not, is there a way to get everything from the old HD to the new one? (The new one will have Win 7 Home Premium. Can I install the Win 7 Ultimate that I had used on the Gateway on it?)
View 11 Replies View RelatedI am trying to eail someone from a file, but when I try it says there is no email program associated to perform the requested action. Please install an email programor, if one is already installed, create abn association in the Defaulf Program panel.
View 8 Replies View RelatedAfter I went on holiday, all my browsers stopped working.IE and chrome just dont start at all, and Firefox and SeaMonkey(I even tried that one!) give me the error that the Microsoft Registry Server stopped working.Opera is the only one that still works, but I can't get comfortable with it.Firefox Safe mode does work, only when I choose to delete all my data of Firefox(all settings, bookmarks, saved passwords and cookies) normal Firefox starts, only for 2 times when I have to do it all over again.They all stopped right after my holiday, and I didn't change anything.I've already tried reinstalling chrome and firefox several times, clearing all data for IE, restoring to a previous point, but nothing seems to work.
Computer -> properties:
This is all on my desktop, I've entered all specs I know in my profile.
I have an HP dc7700 that we are upgrading to Windows 7 and have a PCI controller error. The hardware ID is: PCIVEN_8086&DEV_2994&SUBSYS_2802103C&REV_02.
View 5 Replies View RelatedJust my bad luck - first CoD4 crashes with DirectX error and now Left 4 Dead does that too (those are unrelated problems as far as I can tell, but still)
Anyways, straight to the point: I get "Failed to lock index buffer in CMeshDX8::LockIndexBuffer" error right after intro movie starts. So far none of the solutions I found thanks to google worked so I was wondering if any of you nice people seen that problem. Or even better - solution.
Made me sad when two of my favourite games refused to work in freshly installed system
I have a black spot on my taskbar and from my search here on SF and Googling, the difference between a stuck pixel and a dead one is that a stuck pixel will be white or a colour while a dead pixel will be black. This leads me to my conclusion that what I have is a dead pixel (my warranty ran out about 2 weeks ago so the timing seems right).The majority of opinions is that there is no fix for a dead pixel. When I Google, however, there are 2 or 3 hits that claim there is a fix.
View 8 Replies View RelatedWhen right clicking on the desktop. You can Create a new Folder, Enter the Nvidia Control Panel (and I do often), go to personalize, and something else I do often. "Refresh" I right click and do refresh all the time. It's a bad habit I started in XP.
Basically When I first loaded 7.. it seemed fine. I installed a bunch of drivers, so I'm not sure what one did it. But now when I right click while I'm on the desktop. It takes a solid 3 or so seconds to pop-up.. that is WAY to slow. Vista it was instant.. and Windows 7 was at first also.
Everything else seems speedy. Starting from Shutdown.. opening programs. Everything is pretty speedy. But the right click feature I use often. It's really slow.
Also, when I right click on Taskbar, or any of the desktop icons, it's super Fast. only the right click on the actual desktop.
I think I might go back to WHQL Nvidia driver instead of the BETA for 7. that is what I think I'll try first.
i want to get NVIDIA GeForce GT 430 PCI-E Graphics Card ut will my motherboard support it i got my pc back in 2007 and my previous card was geforce 8800gtx
View 9 Replies View RelatedIf the internal battery on my desktop pc is dead,could this cause my pc not to start?And if so, by replacing it will I be able to start my,pc normally or do I have to do something else?Reason I'm asking is my pc has power but no splash,screen shows up. The light indicator that shows,activity goes on briefly and the dvd light indicator,turns on briefly. But nothing happens, black screen.
View 5 Replies View RelatedI recently tried to play Dr Who, which I downloaded from the BBC. Twice at the same spot it came to a dead stop. No warning no shutdown sequence, just a dead stop. I have had similar stops on other games, but do not know where to begin to sort it out. The Graphics drivers are up to date.
View 8 Replies View RelatedMy laptop was fried when it crashed during a BIOS update and I need to get the files off of it. I do not have a SATA adapter but I do have another laptop that I can plug the hard drive into (which isn't corrupted). Obviously I cannot boot the computer up since the Windows installation is going to differ but I was wondering if there was any sort of bootable CD software that I could run to recover files from the drive. The hard drive was running 64 bit Windows 7.
View 9 Replies View RelatedYesterday my computer just went into a sleep mod, after rebooting the PC the screen resolution + internet was really weird.After installing new driver for my graphic card the resolution problem was fixed. But the internet was still "broken". In the network and sharing -> adapter it's says that I'am enabled but not connected.
I've tried:
- Ping 127.0.0.1 and got "Transmit failed. General failure".
- Net stock winmgmt + netsh etc.
- Uninstalled the firewall.
- Turned off the computer for 10 min and removed my RAM for 10 min.
- Got a new network adapter.
- System restore.
About half hour/hour into my online game of L4D on VS mode my game freezes up and makes a constant buzzing sound? And I have to manually hold the power button on the comp to reboot and during boot it asks to start windows normally or last known good config.
Anyone have any trouble like this? running 64bit Windows 7 build 7600 with 8800GT 512. I'm thinking its a driver issue? I forgot how to check which Nvidia driver I have..
I'm having a long loading time for Dead Island.how to speed this up at all?
View 3 Replies View Related