The above failure has occured ("logon process initialization failure" ). what happend before:
- CPU over heated error upon startup
-- cleaned computer
--cleaned & applied new thermal paste (old stuff was dry)
--- outcome: CPU over heat error upon startup
--Did a BIOS repair and update
--Did a Windows update
[code].....
When I try to boot my HP Compaq laptop I get this message in a dialog box. This computer has been overheating and either powers down itself or we power it down.
View 1 Replies View RelatedAnyone got a clue how to fix it??already searched for it using google..but couldnt get a step by step solution.. i got the system repair disc created from another computer..
View 1 Replies View RelatedI have a Toshiba Laptop which generate this message 'Logon Process Initialization Failure' Interactive logon process initialization has failed please consult the event log for more details' after I ran a AVAST Boot Virus scan. However I could not reached the logon sreen to continue on to get to my destop. I am stuck.
View 1 Replies View RelatedI have a Dell Inspiron n5010 for about two years. I downloaded a large-file game recently, but when I realized that it made my computer freeze, I uninstalled. After that, my laptop suddenly shut down and rebooted, but it automatically went to Startup Repair. I tried to do System Restore, Dell Datasafe Restore, Safe Mode, Last Known Good Configuration, and all options on F8 screen options. After the Dell Datasafe restore, I got the notification: "Logon Process Initialization Failure: Interactive Logon Process Initialization Has Failed."I tried to do Safe Mode, but it did not work. I do not have a copy of Windows 7 or an external hard drive. Windows will not start.
View 1 Replies View Relatedi need to logon to window 7 but there is a black screen written interactive logon process initialization has failed
View 2 Replies View Related"interactive logon process initialization has failed. Please consult the event log for more details" I have been google-ing for hours, with lots of mixed answers. It seems like a very popular problem but no direct step-by-step answer to fixing it? I am not a guru, but have medium level knowledge if someone would be kind enough to point me in the right direction!
I can access F8 and startup repair (no effect/no issues found)
I just did a clean install of windows 7 ultimate and I got this error before it booted into the desktop and my computer restarted and then logged into the desktop and all is working fine at the moment I've checked my logs and nothing is been reported there should I be woried or will it be ok
View 1 Replies View RelatedI recently received a new ASUS Eee PC running Windows 7 Starter. It started fine the first 3 or 4 times I have tried to use it, but now, I am receiving this error message: "Interactive logon process initialization has failed. Please consult the event log for more details". I get the same message in safe mode, and the Repair Your Computer and Last Known Good Configuration options do not work. The computer has not created a system restore point, and I could not burn a system image due to lack of a burner (I have an external one on order).
View 3 Replies View RelatedI have a PC that dual boots both XP and 7. Yesterday, I restarted my computer to go from 7 to XP to play a game, all fine and dandy so far. When I came back onto windows 7, the Windows intro logo loads, disappears as usual, but instead of loading by desktop, I get :
"Interactive logon process initialization has failed. Please consult the event log for more details."
So I decided to go check my event log. I booted on XP, went to G:WindowsSystem32winevtLogs, copied the file : Application.evtx to my USB key, and opened it up on another Win 7 system to check it out. I thought I could find the error, but I can't get any logs out of the event log. The last entry being a month ago for some reason. I want to avoid formatting my Win 7 partition at all costs. Also :
- Safe mode doesn't work
- System restore doesn't work
- System repair doesn't work.
I've tried almost everything so far. I do in fact have complete access to my G: partition, which is my Windows 7 partition.
I have a laptop which has stopped running since yesterday evening and gives me this error on a dialog box due to which I am not able to logon to the system. When I restart my machine, it gives me 4 options i.e.
Safe Mode
Safe Mode with Networks
Safe Mode using command prompt
Logon normally
I tried all 4 of them if atleast any of these allows me to login, but none worked. I referred to the solutions and fixes available on the internet, but all of them says that I need to press F8, enter into a safe mode and operate the issue from there. But even pressing F8 doesn't make any change.
I'm using Windows 7 Home Premium.. Last week it refused to boot up. The message that I got is in a large rectangle. It says" Logon Process initialization Failure. Interactive Logon Process initialization has failed. Please consult the3 event log for more details. How can I see the event log if the computer will not boot up. I ran the repair function and the return to the last known good boot
View 5 Replies View RelatedI have a HP Mini netbook with Windows 7 starter and when it boots up, the screen goes black, but flickers, and puts the computer into a sleep mode, where the power button light starts to blink. Sometimes the screen flickers enought so you can see a faint faded error message but the mouse cursor is unresponsive. When I press (not hold) the power switch, sometimes the display will turn on for 2-3 seconds but the mouse cursor/keyboard is still usually unresponsive. There's sometimes a error message that appears when the display is temporarily on that reads:"Interactive logon process initialization has failed"but the screen goes blank before anything can be clicked...The computer starts fine in safe mode, and with a minimal boot(sysconfig), but chkdsk, windows memory diagnostic, and startup repair are unable to find any issues.I recently booted into safe mode and uninstalled the display drivers via device manager, rebooted and it worked fine, I thought I fixed it, but when I shut down windows, windows finished installing updates and the problem started right back up again.
View 6 Replies View RelatedBSOD: The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000, 0x00000000) I'm getting this on a shop system running Win 7 Home Premium 32 bit. The last thing I did was shutdown before going home and I believe it installed an update then shutdown, so I'm suspecting the update caused the problem.
I can't get into the F8 Safe Mode screen to try Last known good configuration so I think I'll try a System Restore from the install DVD. Does that sound like a good approach?
I don't have the specs with me but I think it's a 2.8Ghz Dual core Intel with 4GB RAM and two SATA drives. It's been running fine for about a year.
i just went out buy a brand new gaming computer. Take about 2 hours to hook the thing up and press the power button and expect the greatest, but to my dismay I receive the error "Interactive Login Process Initialization failed". I clicked OK and the box closed, the display (1920x1080) flashes and then the same error appears. I will eventually receive a blue screen then the computer will reboot. Startup Repair yields no results, so I was wondering what are my options. I am going to go back to micro-center tomorrow, but wanted to know if the internet had
View 9 Replies View RelatedI have a system I have used for a while now and I actually reformatted a few months ago. The system has been working great with no problems but recently during a boot up I noticed an issue. Right when Windows begins its setup to take you to the login screen I noticed a bluescreen and a quick reboot. So I used F8 to boot from the last known good config, no change. I went and disabled the automatic reboot after a crash so I could read the error and it's the:
"Process1_initialization_failed" error.
I looked around for that error and found this: Fix: STOP 0x0000006B PROCESS1_INITIALIZATION_FAILED Blue Screen | The Windows Club
However, when I tried to get into the C: to remove that file, it said "Access Denied" and locked me out. I have yet to be able to get into the system since. To make matters worse I gave up and decided to just reformat the drive and start fresh. However, when I load up my Windows Installation DVD it is noticeably slow, it takes 5-10 minutes to go from step to step. So I got to the "Install" button screen, clicked it and it says "Setup is starting..." and then...nothing. It just stays on that screen for a long time, I gave it 30 minutes last night. So I'm unable to even reformat.
I accidently screwed up the administrator account and once, i tried to install a software and it came "You need a administrator password to proceed"so i typed it then it came the error"this user has not been granted the requested logon type at this computer i tried a lot but its still not working and i cant install anythin.
View 5 Replies View RelatedSo a while back I was watching a video and a pop up appeared and I it asked me if I wanted to download something and I clicked no. But that same pop up continuously appeared and I accidentally clicked yes. The computer froze so I forced shut down and whrn I tried to turn it on again, the BSOD appeared. It turned off a second time and then when it restared, the safe mode window appeared and I ran that and it tried to fix the problem but now whenever I try to get on, there is a black screen with a window that says" interactive logon process has failed. Please consult the event log" I click ok and I just appears again. There is no getting past it and I am unable to do anything on my. Computer.
View 4 Replies View RelatedToday when I went to turn on my Samsung laptop (with Windows 7), I got a ""Logon Process Initialization Failure" error message. I didn't even get to the screen which asks for my password to access the computer's functions. I tried to reboot into safe mode, but I got the same thing again. I can't open any program or even get to my desktop screen.
I found a Microsoft hotfix that appears to be for this problem, and although I saved the .exe file to my thumb drive from my desktop computer, I'm at a loss as to how to install it on my laptop when it won't operate correctly to download and run it!
(The Microsoft link that seems to address my issue is here: [URL]
The only thing that may have changed is that my old power cord to the laptop was frayed, and I ordered a new one off eBay. It's not a Samsung cord, but a replacement cord. My laptop worked fine with it for an entire day, then the following day is when this happened. I don't know if it's related to the problem or not.
I have just gotten a job working on the internet and am trying to get updates done...Can I fix somehow all of the failed updates in one process? I really need to keep the window open to see who needs what on my work. I just need to know too, why all the failed updates, I am just estimating but am sure there are more than 7 of them. I want to get to work asap...
View 14 Replies View Relatedwe are attempting to upgrade the harddrive in an asus eeepc 1005ha from 250 Gb to 750Gb. we purchased "Disk Director" by acronis and are using the cloning feature.
everything seemed to go well until we installed the new drive and it would not boot. the original drive was reinstalled and a second attempt was made to clone it.
the cloning process includes a reboot of the computer to start cloning. it would not boot. a screen comes up the says "windows failed to start. a recent hardware or software change might be the cause..." it then says that we need to use the installation disc and the repair computer feature.
the repair window on the disc will not come up, what starts is the recovery utility which reinstalls the OS and erases everything else.
I am connected to my company's VPN and it recognizes me, but when I enter my password it says, "Logon Failed"
View 4 Replies View RelatedI just installed W7 RC1 and now I cannot connect to my windows 2000 computer that has my printers. When I try to connect it comes up with "Logon failure: unknown user name or bad password" With W7 beta I was able to connect.
I noticed that when I click Use another account it has a domain listed under the username and password area and that domain shows up in the username like this DomainUsername.
I am trying to network two win 7 computers. I get the screen Logon failure: unknown user name or bad password.
I have gone done the following: 1. Same user names and password 2. disabled windows firewall and avg free. 3. Answered "On" to all private network selections. 4. Local security policy to classic 5. Shared files I want to access. 6. Home group named as workgroup
The computer comes up in the Networking and Sharing. When selected I get the screen Logon failure: unknown username or bad password. I have even had my ISP pro look at this and he cannot figure it out. Same thing has happened to me in vista. I am using new win 7 installs. I can map drives with ip addresses and access.
I've error!logon failure: unknown username or bad password
View 1 Replies View RelatedI just want to know how to create a user profile logon for the docked and undocked logon in Windows 7?
View 1 Replies View RelatedI am getting this error all the time with Windows 7. I open a text file I want to edit, then go to save my changes and I get this error:"The process cannot access the file because it is being used by another process".I have full admin rights, running Win7 Ultimate x64 SP1. From a bit of research I have seen where many others have been experiencing this problem or something similar too. The only "fix" (that doesn't work all the time) is to close explorer.exe and then restart it to "release the handle"? Anyway, this is not acceptable for all the money and time I spent upgrading/configuring this new OS from XP -where I never had this problem- and seriously cuts down my productivity.Has Microsoft even acknowledged this as a bug yet? I can duplicate this scenario the second or third time I try to edit/save/delete a text file and I know that explorer.exe is the problem or a big part of it in any case. I don't want to go back to XP x64 but having to deal with this headache 10-20 times a day is just too much to ask.The file here is a game's map script & has to be saved to a .pk3 and then loaded into the program's root before it can run so i know othing else is running the file. No apps running in taskmngr either.
View 13 Replies View RelatedEvery time I try to get administrative access, I type in the password and it says, "There are currently no logon servers available to service the logon request." I'm able to sign in as the administrator, it's just when I need to gain administrative access that this error pops-up.
View 2 Replies View RelatedNew dell n7110/win7sp1x64.At startup on new machine from dell, process explorer (procexp64.exe) lists 81 processes running (seems like way too many - compared to xp with maybe 25 at startup). But which processes I can turn off is a question for another day. OK, read carefully, at least 15 processes in PE show " Path: error opening process". PID, CPU, Private Bytes, and working set columns are shown for these "problem" processes, but nothing after that, ie, description, company name etc. For all other listed running processes (with known paths), all info is shown in all columns. The problem processes include some important ones, services, crss, ism, wininit, winlogon, that must to be working for the computer to work, and everything seems to be working properly, and no cpu spikes or other weird stuff is happening. Right clicking properties on these problem processes, properties window pops up as normal, but shows "version: n/a, build: n/a, path: error opening process, no command line, no current directory, autostart location: n/a, Parent: non existent process (708), user: access denied. Again, this info can not be correct since the computer is working. And then, after a few minutes, another window pops up and says PE has stopped working, and closes the program. Now, if this was the whole story, I would go to sysinternals with this, but read on... Task manager running simultaneously with PE lists 83 processes running, more processes than PE, and also ~5 different processes than PE, and PE lists some processes running that TM doesn't list. So PE and TM show different running processes at the same time. How can that be? For the processes that PE shows "error opening", e.g., crss, etc., when I click properties in TM for the same process, sometimes I get the usual/normal pop-up window listing the path, and all the other data as normal, suggesting the process is working properly. But sometimes when I click properties in TM for the processes that PE shows "error opening", I get no pop-up at all, nothing for that process. So, IMO, it's not just a PE glitch, something is actually wrong here. This is a new machine, with PE the only 3rd party installation. I have installed several dell driver updates, but this problem occurred before I installed them. Also, remember PE and TM simultaneously list some different running processes and TM also fails to show paths, etc.
View 3 Replies View RelatedOK, when I am overclocking my ram I am able to reach DDR3 2296 however when I go pass DDR3 2300+ I get the following error code 79 which is CSM initialization.
Question 1
Does anyone know what CSM initialization is?
Question 2
What bios setting do I need to do to push past this to keep overclocking?
I am using Windows 7 build 7100 X64. I have a Microsoft VX3000 Webcam. I think when I first installed it, it was working. I have been beating my brains out searching on the web for solutions and seen some threads here, nothing has fixed the initilization error (that's why I get when I try and run the Lifecam software). I can't even get into configuration.
I listed my hardware profile upon signing up so you can see it, it's kind of oldish system, socket 939.
I know the webcam works, with the latest drivers, in Windows XP SP3 on another system.
I have changed USB ports. I have tried uninstalling and reinstalling. I've tried manually loading the .inf file.
It shows, in Device Manager, that the driver is working ok, both for the cam and the sound of the mic. I have tried, as I said, loading the .inf files for both of those.
I am using Norton's Beta Internet Security. I have a Razer Lachesis Mouse with the latest drivers for it.
I really need this to work because my loved ones live in another country right now and I miss them seeing me and me seeing them. How do I report this to MS? Does anyone have some ideas on what I can do to fix this?