Join A Windows XP Computer To A Windows 7 Homegroup?
Jan 22, 2012
Or how do I just make the XP box know about the Windows 7 box? They're both fed from the same router so should have IP addresses in the same group - but although the Windows 7 PC can see the XP PC, it doesn't work the other way around.
AFAICT the only place (in XP) where I can view other computers is in my XP workgroup. But Windows 7 uses homegroups which don't seem to be quite the same thing. A workgroup seems to have a name but no password whereas a homegroup seems to have a password but no name.
View 3 Replies
ADVERTISEMENT
Feb 6, 2011
I have 2 new Acer computers, both running Windows 7 Home Premium. I am attempting to share files on a homegroup for the first time.I can create a home group on either computer, but I get this message when try to join the newly created home group from other computer: "Windows can�t join homegroup on this computer " In other words, both can create a homegroup, but whatever the one creates , the other cannot join. One important note is that one of the computers does not have the three network adapters the other has. It is missing a wifi adapter although it has a wifi port. Could this be part of the problem? Following are the 18 steps I have completed to date, all of which were redone by a "for fee" networking service except for resetting the router (I had already done this multiple times). These are not necessarily in the order I did them and I retried creating and joining a homegroup on both computers between each "fix." I checked the status and network map on both computers between steps to verify changes were registered correctly by both. Various corrections were made along the way, but none worked.
View 3 Replies
View Related
Mar 27, 2011
How to Join or Add a Computer to a Windows 7 Homegroup ?
View 0 Replies
View Related
Nov 20, 2011
i have recently got a brand new machine and have updated from windows xp to windows 7. I have been trying to join the homegroup set up on my parents computer so i can access the printer. My computer is connected to my wired router before going into a ethernet connector in my wall and that then joins the modem. I am using norton internet security and so is my parents computer.
When my computer is plugged into the router and i go into 'trust control' in norton, my router shows up as full trust, but no other computers show up and when i try joining homegroups none show up. But when i plug my computer into the wall bypassing my router, norton shows all the computers on the network and lets me join the homegroup. So to summarise, i cant join homegroups when i am connected to my router, but i can join when i dont use the router.
Edit:
My router is a: Netgear WGR614v9
View 1 Replies
View Related
Aug 19, 2011
I used to have a homegroup set up on computer B, but then i decided to host the homegroup from computer A (my most recent build) because computer A is running more often than any other computer now. So I set it up on computer A and set a password (I know they have to be case-sensitive). When I tried to get computer B to join the homegroup it said the password was incorrect. I know that this isn't the case. Computer C, D, etc. can join homegroup A, but computer B is being stubborn, and can no longer join other homegroups, or have other computers join its homegroup.
So I tried setting up a homegroup on computer B and seeing if computer A could join. Same problem occurred, incorrect password.
View 1 Replies
View Related
Jul 26, 2012
Ok so here we go, I have my laptop and pc hooked up with a lan core, and my laptop is sharing its internet with the pc. I want to create a home group so they can share files easy, but when i create a group on the computer (does not mater what computer) the other computer can't find it.
View 1 Replies
View Related
Apr 14, 2011
I originally set up a Homegroup from a PC I have now replaced. My new PC recognises that there is a Homegroup, but won't let me join - it says the password is wrong.
View 2 Replies
View Related
Aug 31, 2011
I have a desktop that is connected to my Belkin router via wire. I have 3 laptops that are all connected to the router wirelessly. All computers have Windows 7 64bit and synched clocks. All are connected to a Home network. All 3 laptops detect that a Homegroup has been created on the wired desktop. I'm using the correct Homegroup password. All computers have discovery on. All computers have IPv4 and Ipv6 running. All services are running. Everything else I've read and tried regarding troubleshooting this issue haven't worked. All computers can see each other on the Network, but can't connect to the Homegroup.
View 9 Replies
View Related
Aug 16, 2011
I have a Windows 7 Pro with a 40MB drive and a 1.5TB drive. I wanted to add the TB drive to the 40MB drive which is the C: drive. I don't see a way to do this. I have checked out 3rd party software to join them but my IT friends say that's not a good idea.
View 2 Replies
View Related
Oct 8, 2012
5 month old Dell XPS 8500 Win 7 64 bit Pro as main computer connected by Wired Adapter, Upgraded Gateway 5632E also running Win 7 64 bit pro as second connected by Wireless. Both running Kapersky successfully. no network problems for 5 mo.
Both were successfully linked using homegroup. Had to take Gateway to a remote location to do a business demo. While there had to link to a local public WiFi. While connecting made mistake and left homegroup.
When Gateway returned to homebase a few days later it was fine, had no problems finding wireless but could not see or rejoin Dell machine homegroup. It would let me set up a new homegroup.
Went to Dell box and found 1) homegroup no longer existed, 2) router and network and wireless printing no longer found - Red X on the taskbar) even though internet was still working fine.
Took nearly a week of trying differernt fixes, on adapter- off adapter- different adapter reboot network, router, even updated router firmware (Yes I went through every ipconfig reset, renew, redecorate etc. I've used netsh functions to try to get evrything to reset. Changes services.msc settings per other posts. Finally in desperation, deleted every sub key in the registry related to network locational awareness and got the Dell to find the network, let me set it up as a "home" network and then even see the invitation to join the Gateway's homegroup.
Then I hit a wall- when I try to join- Win 7 says I can't join the homegroup because the network is not a "home network". Of course troubleshooting is useless and goes into an endless loop. Have searched in desperation for any way to make Win 7 return to a clean slate so it can sense that it really is on a home network without success. Applied the fix-it and hotpatch for when Win 7 gets stuck in public mode. No joy. Deleted the hide wizard subkey as suggested elsewhere. No Joy. Gut feeling says problem must lie in the NLA or peer networking somewhere but where?
Does anyone know of a method or set of steps (short of a clean reinstall of Win 7) to completely clear every thing the OS knows about my network and force it to acknowlege my network is a home network? Is there a registry hack that will clear the problem?
I know I could abandon the homegroup and do conventional file/print share but I am concerned that using that solution won't last as whatever is screwing up the homegroup could eventually screw regular sharing and then I'm back to reformating/reinstalling. I'm just about ready to join the Apple folks so I never have to work on Windows again.
View 2 Replies
View Related
Oct 17, 2012
i hard problems with my forwardlookup zone and i deleted it. created a new forwardlookup zone but now i can not join any new computers to the server only the old ones can ping the server on the same network some one
View 2 Replies
View Related
Jul 24, 2012
I have been trying all day to remove my computer from the home group. The error reads "windows cant remove your computer from the home group" I have spent hours reading blogs and trying what other people have done to fix the same problem but I have not had any luck. I have gone into services and activated the peer networking but still I am not able to disconnect. I am running out of patience can someone please help. I have gone as far as calling HP but they want to charge me $200.00 and I dont have that money right now to spend....
View 9 Replies
View Related
Aug 19, 2012
I have a laptop computer that indicates it is part of a homegroup. I would like to leave the homegroup but I get the error message "Windows couldn't remove your computer from the homegroup." The homegroup was started on my desktop and I changed the password. I expected the laptop to detect that the password had been changed but it didn't. So I tried to leave the homegroup to rejoin with the new password but I'm not allowed to leave.
View 3 Replies
View Related
Jul 18, 2012
I reformatted my comptuer about...2 months ago roughly, which i would think would reset the computers setting so i wouldn't be in a home group but reguardless i can't leave the homegroup that i'm in. i can't view homegorup password which makes me belive i'm not actually -IN- a homegroup but my computer THINKS it is. i've tried deleting the idstore.sst file and replaced it with the trouble shoot thingy but that didn't work.. If there is a way to completely reset the HG feature that would be great, or replace a file to kick em out of the home group or something.
View 3 Replies
View Related
Aug 18, 2012
So sometime within the last month or so I noticed my laptop was starting to act funny when trying to access files over the homegroup on my desktop--it was asking me for my credentials every time I restarted the computer, and wouldn't remember them even when I checked the box. As best I could tell it was using my computer's name as my domain, so when I typed in the username/password I also had to type in the "domain" of my desktop, which was simply its name.
Anyway, I didn't think much of it until recently I wanted to fix this problem, and I noticed more problems. I first removed both computers from the homegroup. Then, I tried to make a new homegroup on my laptop. But attempting this results in the error message you see in the thread title, and no error code at all. However, I can still create a homegroup with my desktop, and I can even join that homegroup from my laptop.
But after joining, I cannot access the video/audo/photo folders that are shared on the desktop and the icons for them are generic, not the unique ones for each folder type. However, once I share any additional folders from the desktop, I can then access all the folders from the laptop, once I have entered the same login information it had started asking me for weeks ago. Oddly, my desktop can access those same folders on my laptop without any trouble, as could my wife's laptop! Just to be clear what I have tried so far:
1. Deleting everything in the WindowsServiceProfilesLocalServiceAppDataRoamingPeerNetworking folder and rebooting.
2. Checking the correct services were turned on.
3. Ensured all computer names are different.
4. I tried two different routers, in case it was a hardware problem (one router is the one on which I had no problem using homegroups until a month ago).
5. Checking IPv6 is enabled, and adding the registry edit mentioned elsewhere to ensure it is enabled.
6. The usual homegroup troubleshooting, on both the laptop and the desktop.
7. Deleted all my Windows credentials.
8. Synced the clocks/timezones.
9. Tried using a wired connection. The desktop is on wi-fi as well, though, and has no problems.
Tech details:
Windows 7 Home Premium x64
Alienware M11x R3 w/Killer Wireless-N 1103
Linksys WRT-160N with DD-WRT (original router)
TP-Link WDR-3300 with stock firmware (new router)
View 6 Replies
View Related
Nov 16, 2009
I just spent an entire day figuring this issue out.
Nothing solved it for me.
I have a dual LAN on my computer and two computers with Windows 7.
One Lan card is for internet and the other is for connecting via ethernet cable with the second computer. I can share internet and files with the two but I can't make the remote computer to join the Home group since it is connected to the unidentified network LAN card on my host computer.
How can I change the unidentified network to Home? sine it is actually home!
I configured static IP in order to share the internet and enabled the ICS.
View 6 Replies
View Related
Aug 3, 2012
I installed Windows 7 on my laptop, and I also have a desktop running Windows 7. I am trying to connect my laptop to my homegroup with the password for my homegroup, but my desktop will not reveal it. Is there any other place that I can find it?
View 1 Replies
View Related
Jun 2, 2012
I have two computers running Windows 7 and both belong to a Homegroup. From one computer I can access both computers and from the other I can't access the other. It say's I don't have permission but I gave it everyone permission when I shared it. I can't figure out why?
View 1 Replies
View Related
Oct 15, 2012
I have two Dell laptops, both running Windows 7. I have both set up on a HomeGroup and have enabled media sharing on both as well. Network discovery is turned on for both, file and printer sharing is on, password protected sharing is off. Under WMP, I have Media Streaming on. None of my folders are hidden.
For this discussion, things with Laptop A are fine, but Laptop B is causing me some problems. I have two main issues and fear they may be related: 1. From Laptop B, I can see Laptop A in the homegroup and I can see it in WMP. I can access all of Laptop A's files and play them back with no problem. However, from Laptop A, I can see Laptop B in the Homegroup, but I can not see it in WMP. I can navigate to certain folders in explorer and see the files, but I can not play them, even though I have all sharing functions that I can think of turned on. (I do have McAfee running, but disabled the firewall in case that was the problem. It didn't help)
Also, I have a DLNA compliant device on the network that I can stream music to using the "play to" feature in WMP. From Laptop A I can play to the network speaker just fine. I can not from Laptop B. I should add that I can "see" the device in WMP from Laptop B, but when I queue a track to play, it just hangs up as if it can't communicate any further with the networked speaker.
View 1 Replies
View Related
Oct 19, 2009
I created a homegroup and my girlfriend join it. So far no problem.
She can see my content without any problems.
She also sees me in the explorer under HomeGroup, BUT I dont.
I cant see her under Homegroup, but can access her under Network > Choosing her computer...
Any clews what that could be?
View 1 Replies
View Related
Oct 22, 2009
I am trying to set up a homegroup for the first time on my Windows 7 Professional computer and it isn't allowing me to. After I select what I would like to share (Pictures, Videos, etc.), and click on the Next button, I get the pop-up error message "Windows cannot set up a homegroup on this computer."
View 9 Replies
View Related
Oct 25, 2009
I've got a really weird problem with the Homegroup feature of 7.
I've got 3 computers - 2 desktops [PC1+PC2] (wired) and 1 laptop [PC3] (wireless) - all setup on the same network, workgroup and homegroup. I setup the homegroup on PC1 and then joined with the other 2. PC1 and PC3 can see all PCs, but PC2 cannot see PC1 (but can see PC3).
So basically PC1 and PC3 can share files between all 3 PCs but PC2 can only share files with PC3 because it can't see PC1.
I've tried using the troubleshooter on all PCs and made sure the homegroup settings are the same on each PC. Is there anything I've missed or done wrong?
Also, I've just noticed that if I go to the Network section in Windows Explorer I can only see PC3 but if I type the address to PC1 (like: "PC1") I can access it. What's going on here?
View 3 Replies
View Related
Apr 30, 2012
I have two computer in my house and they are on the same homegroup. I share the disk too.
My brother have a computer in is house and I was wondering if there is a way with windows or a software to do that.
View 2 Replies
View Related
Oct 4, 2011
Homegroup cannot find the laptop?
View 1 Replies
View Related
Aug 15, 2009
I recently got Windows 7 Professional through MSDN-AA for my two computers (one 64-bit and one 32-bit license). They both installed fine and I'm really enjoying the O.S. so far - however, I have an issue. I very, very frequently transfer project files between the two computers (some of the visual files are pretty large) - so file sharing is important to me. I was excited when I learned about the Homegroup features and was eager to give them a shot.
No go
Both computers join the Homegroup fine, and can access one anothers shared folders. However, as soon as I try to actually transfer a file on the 64 bit computer (trying to transfer from the 64-bit to the 32-bit) the computer hard locks. No BSOD, but everything locks up (screen stays the same, caps-lock is non-responsive, mouse doesn't move). I have to hard-reboot to fix the issue.
I'm not having any other issues with the installation, except the Homegroup hard locking. Any thoughts/additional information requests?
View 3 Replies
View Related
Jun 27, 2012
I have a Desktop computer with Windows 7 Ultimate 64 bit and a laptop with Windows 7 Ultimate 32 bit
The Laptop can see the desktop, files and printer But the Desktop cannot see the Homegroup. The desktop does not have the option to allow remote desktop connections, I don't know if that is connected to the same issue or not.
When I try to modify the Homegroup on the desktop, I get the error message mentioned above. this computer can't connect to homegroup
View 1 Replies
View Related
Aug 28, 2012
I have a 2 computer setup both have successfully joined the homegroup I created. From comp A, I can access everything on comp B but comp B cannot access anything on comp A. I can see what's on comp A but if I try to go there it asks for credentials. Also tied to this (I assume), when I try and access the printer on comp A, the "Install Printer" button literally does nothing (screenshot).
I have no idea where to begin with this problem. The homegroup advanced settings are set up to share files and printers. I've allowed File Sharing in Windows Firewall on both computers. I've completely left the homegroup and made a new one.
View 1 Replies
View Related
Jan 26, 2011
How do I join my Windows 7 PC to 2 domains? We currently have our day to day domain as well as a dev domain. when trying to log back into the other domain I get an error message stating something along the lines of a security authentication problem with the workstation. i also changed the dns b/w the 2 so that it would work.
in theory, if i had a laptop and were traveling from my office to an offsite client where i would need a different login, would i have to go through the long route of bringing the pc on and off the domain every time?
View 4 Replies
View Related
Apr 10, 2011
i am having trying to get my homegroup setup on my main computer? from my understanding it is pretty simple (apparently not for me). i'm not getting the "join now" page when i go the homegroup in control panel. this is the only page i keep getting, i've pretty much tried everything but i keep getting this page, not the "join now" page. i've watched videos on Internet on how to do it but it's not doing what it is suppose to do.
i'm not sure but i think it might have something to do with my router?
View 9 Replies
View Related
Sep 11, 2012
I have a desktop with Windows 7 64bit prof. and a laptop with the same. I have setup the homegroup and I am able to access all files on the laptop from the desktop and vice-versa. My problem is, my wife who uses the desktop wants to save new documents in the laptop which I use when in the office. for example: wife got an email on the desktop with an attached document that she wanted to save in the 'my documents' folder on my laptop. So when she selects save as and then selects the location on my laptop through the homegroup connection she gets the error message saying you need permission to to this, we tried it the other way by trying to save a document onto the desktop from the laptop and got the same message.
I am not an expert by any means with this sort of thing so if the replies could be as simple and clear as possible, cheers.
View 3 Replies
View Related
Jan 17, 2012
how to access my desktop that is on my Homegroup. When I try to access my desktop from my laptop I get asked to "Enter Network Password". The password I used for my router and my homegroup are both not working and I tried changing my homegroup password without avail.
Can I just completely turn off the homegroup password? On both computers I have opted to turn off password protection for the network but it doesn't seem to change anything.
BTW, I can access my laptop via my desktop but just not vice versa.
I have tried to find user guides but nothing seems to help. I can't even leave the homegroup on my laptop which I find weird.
View 12 Replies
View Related
