Have A Broken Partition That Cannot Be Deleted, Formatted Or Resized
Sep 8, 2012
I have this broken partition on my computer. If I open it in the disk administrator it says that it is formatted. The problem is that it isn't formatted correctly and that I can't read it, change it's properties or delete it. If I try to do anything with it the tool says that the file is not found.I really want to delete it to get the space back. What can I do? The problem is likely that my harddrive has recorded somewhere that a partition exists while it in reality doesn't. Is there a way to make my computer realize that it is actually unallocated space?
I have this broken partition on my computer. If I open it in the disk administrator it says that it is formatted. The problem is that it isn't formatted correctly and that I can't read it, change it's properties or delete it. If I try to do anything with it the tool says that the file is not found.
I really want to delete it to get the space back. What can I do? The problem is likely that my harddrive has recorded somewhere that a partition exists while it in reality doesn't. Is there a way to make my computer realize that it is actually unallocated space?
Im using dell inspiron 1564.this is a dual boot system-(windows7 & ubuntu). Recently my system got affected by viruses. Even-though i have a working antivirus I get frequent pop-ups saying "threat detected". I'm tired with deleting those viruses. so decided to restore system from OEM partition to get rid of all those viruses. before installing ubuntu I had a single partition (c:), then i made it into two partitions one for ubuntu clean install. now if I restore my system to factory settings from OEM of windows7 will the partition of ubuntu get formatted or deleted?
I use EASEUS Partition Master 8.0.1 Home Edition on windows 7 sp1. I have resized several times my different partions with no trouble. But now I had increased one of my drives and now i can t acces and open it because of this error : [URL]. I can't format it because of the data in it and with any possible access to the drive, I have not enough space on my hard drive to copy data to another drive.
I have a Boot Camped Mac Mini with Windows 7. I recently needed to allocate more disk space to it as i only had a gig left, i booted into MacOS and used Disk Utility to make the Mac partition smaller, i rebooted into windows and downloaded software called 'Partition Wizard' from www.partitionwizard.com. I dragged the Windows partition all the way so that it used up all the Unallocated Space, it required a reboot to finsih and when it did it displayed an error such as thistatus:0xc0000255Info: The Windows Boot Configuration Data file is missing required informationI have the Installation Disk and i have tried repairing more than 3 times and it seemed to do nothing, so i tried using the CMD and bootrec.exe and now when i start the repair wizard it says there is no windows partition yet i can still try repairing things (Yet still does not repair anything). I downloaded EasyBCD but im on my Mac partition right now and its an exe, i have no clue how to run that within windows to try and repair the Bootloader. I do however have access to the BOOTCAMP partition through the mac side, and i can access all the files. Is there some way i can repair the bootloader through this?
what caused the problem: inserting a usb mouse ive been using for half a year. i got a bsod and now the D partition is broken. already tried re-installing C with a new windows, but no luck.How can i try to get the data out of D if thats possible? i already ran some kind of live CD, but it couldnt access the D partition...i need something strong, and if its not possible to get any data, whats a good formatting app?
I have an Asus 1215n netbook. It came with Windows 7 Home Premium installed. The drive came with the following partitions:
100 GB Windows 7 15 GB Asus Expressgate (a quick-boot minimal OS) 118 GB Empty partition 15 MB (unknown)
I had been using TrueCrypt to encrypt the 100 GB system partition, which required that I enter a password before booting into windows.Other than that I never touched it until now. Today I decided to upgrade to Windows 7 Ultimate, so after making sure everything I wanted to keep was on the 118 GB partition, I booted into the Windows 7 setup, formatted *only the 100 GB partition* from within the setup, and selected it as the volume to which to install.Upon restarting, the third partition wasn't shown in My Computer. I went to Administrative Tools -> Computer Management -> Storage -> Disk Management, which shows the following partitions:
I've done these exact steps in the past with similar configurations, and have never had this happen to me before. I can only surmise that this is due to having had a TrueCrypt boot manager, but beyond that I am uncertain. how I might be able to recover this partition?
in an attempt to get rid of my system reserved partition, i formatted my other partition with over 600 GB of pictures and files. i tried to run "active partition recovery", left it to run for over 5 hours, and all it ironically found was the system reserved partitionthe rest of my disk is currently unallocated space
I decided a week ago to install Ubuntu 11.04 alongside my Windows 7, which as you know, created a new parition. As you also know, Ubuntu likes to use it's own boot manager. Well, I decided that I was going to download and install the Windows 8 Build 7955 (as I found on Windows 8 Forums) onto the partition that was occupied by Ubuntu.. so, I downloaded the image and then, in my disk management, deleted the entire parition that Ubuntu was installed on. I went to restart my computer to finish an AntiVirus update shortly thereafter, and got a message saying something along the lines of "Grub error; unknown filesystem." I attempted a repair with my disc and nothing worked.Right now, I am installing Windows 7 on the new parition in the hopes that I can get it working again, just to get at my files on the main parition. If not, I do have a SATA-to-USB adapter that I can use to manually extract the files onto another computer, and then just wide the drive entirely, but I'm really hoping I don't have to do that, as it would be SUCH a nuisance if I had to re-do EVERYTHING on my laptop. So, what I'm asking is, if the fresh install on the new partition doesn't work, is there any way to restore the original boot manager, or am I kinda dead in the water?
I deleted the Ubuntu 10.04 partition in windows computer management/disk management. Then i shut down the computer, upon booting up i was greeted with an grub error and unable to boot into windows. I used super grub disk, now windows boots up fine now. I'm left with this now, three other partitions and a 218gb of free space. How can i allocate my free space (218gb) to my C: drive? I right click my C: drive but the extend volume is grayed out. Only the Shrink volume is selectable.
I deleted the 100 mb partition for Windows 7 yesterday because you're not allowed more than 4 partitions at one time when installing linux. So i didn't think i needed it. I deleted it realizing soon after than i required it for booting. I have a laptop so i didnt receive a Windows installation disk to correct this quickly, i have recovery disks that will work, but i don't want to have to go through updating and downloading so much again. I was curious if there was anyway i could fix this without formatting my hard drive. Like if i could download that partition from somewhere or the windows installation disk.
The other day I accidentally deleted the local hard disk partition (contains win 7 OS), instead of the external thumbdrive. Now there are no partitions that exist on the drive at all. The data and files are in there but are in a non allocated space.. what is the best way to reverse this mistake .
By a mistake today, a partition (400 GB) containing important data was deleted. The partion is now restored to NTFS format.how to restore some of the lost data.
For some reason i have to change my partition table from MBR to GPT. So i made a backup of my c drive using Acronis. But when i tried to restore my Windows, I got a message BOOTMGR missing press cntrl+alt+del to restart. Then i came to know that ultimate edition has a hidden partition called system reserved. Is there any way to restore my windows with same programs and drivers. Something like reinstalling windows 7 x64 ultimate and replacing everything by backup except boot files?
I accidentally deleted the recovery partition on my Hp compaq Presario CQ61 and have never burnt the recovery to a DVD.Checked Hp Site and the only option is to re-order another.The serial number of my Notebook is CNF9494GMB & Model is CQ-61420US
Here is what happened to me, I had windows 7 installed on a SATA HDD. I bought an SSD and installed a fresh copy of windows 7 on the SSD. then I took out the SATA harddrive which I learned it contained the system parition. Now the new windows doesnt boot.
If I open diskpart and do a LIST VOL I only get one which is the SSD and inside I only have one partition with the windows files.
After a few comamnd I was able to see the installation when I start the recovery console. but when boot up. as soon as the little cicles for the windows logo comes up it freezes and reboots.
I tried making the volume parition active, but from what I have read, looks like I need to create a system parition. Is that possible. or do I have to reinstall from scrtach. (the old SATA drive is formated so no going back) Its just so close, i see my data intact on the drive lol but cant get windows to boot.
I accidently deleted my system reserved partition I only have one system installed on my pc, so no dual boot is needed or anything, I think it created a seperate system partition because of a windows.old folder, which has already been deleted now, because it took too much space. So now when I start up my pc i get the error that my bootmgr is missing. I tried repairing it by inserting the windows 7 dvd and using the repair, but when I click on windows 7 and i try to repair it it says it's the wrong version of windows. My language settings are set correctly so that's not the problem. I then tried to do it by pressing shift + f10 to get into the command line and using the following commands: Bootrec.exe /FixMbr Bootrec.exe /FixBoot Bootrec.exe /ScanOs Bootrec.exe /RebuildBcd however the scanos and rebuildbcd can't find any windows installation. If i put in my windows 7 dvd and i startup my pc, it works fine, because it then uses the bootmgr from the Windows 7 dvd. So I thought, let's just copy the bootmgr.exe to my windows. But this didn't work either.
Ok so to start off I wanted a clean install of Windows 7 Home Premium. I had everything ready and I formatted the hard drive, deleted all the partitions and started the fresh installation of Windows 7. Then I realized I didn't extract my Windows 7 product key. Now I bought this laptop from Ebay. It is a Dell XPS 15 (L502x). I tried putting in the product key that was on the little sticker on the bottom of my laptop but it said that the key was invalid. I contacted Dell and explained my situation to them and they registered me as the new laptop owner and sent me the recovery disks. Now my question is will the recovery disks work even though I don't have a product key anymore?
I mistakenly deleted the recovery partition when I was trying to formatting the hard drive, I dont know much about how it works so what would be the best way to remake it and have it function the same way the other one did (which I also dont know how that worked) or is there a better method. This is also a new Samsung hard drive with windows 7 Home premium
I recently bought a new Toshiba Portege R705-P41 which came loaded with a ton of crap so I attempted to do a clean install but somehow managed to deleted the "System" partition.Now the laptop wont boot and I stupidly didn't create a system restore point so I'm freaking out a little bit.Is there any way I can get whatever was in the System partition back so the computer will boot and I can reinstall Windows 7?
I have a Lenovo 3000 G430 Laptop with Windows 7 Home Basic Edition installed. I wanted to re-partition my 250GB hard disk into 3 logical drives. I shutdown the system and change the order of boot preference to CDRom. I had a bootable CD with me along with FDISK utility on it. I boot my laptop using bootable CD and ran FDISK to delete the existing NTFS (Non-Dos) partition.After deleting all the partitions, When I tried to create a new partition, it displays me disk unallocated space of 8GB only. After this I had tried several partition utility but all of them display disk unallocated space of 8GB only.I have run into problem. Can anyone help me find and resolve the issue with Disk space reporting less unallocated space of 8GB? while the actual size of harddisk is 250GB.
I deleted the ubuntu partition now windows wont boot. I have tried the recovery disk and tried "bootrec /fixmbr" but it didnt work.Now the win7 installation is not showing up in the recovery console.When I turn the laptop on I get "Insert System Disk in drive Press any key when ready".
I was trying to get a dual boot setup of Windows 7 and Ubuntu where I had 1 partition for Windows 7, another for Ubuntu, and a third neutral partition accessible from either OS where I would house all of my data. The problem is, my computer already had 3 partitions set up: Windows 7, the system boot partition, and one called PQService. Because I could not find a tutorial to delete pqservice, I decided to delete my system partition, even though this seemed a little more risky (apparently it was lol.) I used this tutorial: TeraByte Unlimited Knowledge Base to copy the boot files to the windows partition and delete it. I then booted into a Live CD of Ubuntu, and used Gparted to move my Windows 7 partition in order to get rid of the 100MB of unallocated hard drive space. I then attempted to restart my computer into Windows and i got an error saying that windows could not boot because of some recent hardware changes. Is there anyway I could get back into windows without reinstalling it? Do I need to figure out some way to restore my System partition? Is there someway I could get windows to boot without doing either of those?
I deleted my recovery partition before realising it was the recovery partition. That 11.26GB unallocated was the recovery partition.I was installing Ubuntu as a dual boot, and wanted to install it on its own partition. But I already had 4 primary partitions (the 1.46GB bootable recovery partition, C:, E: and the 11.26GB partition with the recovery files). So i shrunk C:,deleted the 11.26GB partiton and created the new primary partition. I later discovered it had the recovery files.Ubuntu installation needed some other partitions and it must've converted E: to a logical drive.I have installed the MiniTool Partition Wizard Home Edition v7.5 The results of a full quick scan: Double clicking the HHDRECOVERY partition (unallocated space) shows the recovery files: However, doing a full scan of the unallocated space also shows a small partition labeled "Boot": Double clicking that drive shows the following:However, that folder does not appear to contain any files. There was a [+] to the left of the folder, but clicking it just made it disappear since there was nothing to show. I'm not sure if I can just ignore this tiny section or not.
I am just wondering if anyone has any recommendations on how I should proceed. I have not ever attempted partition recovery or used this program before and feel like I only have one shot at this and don't want to screw it up, if it is even possible.Also, yes I did create recovery discs, I think I've done it twice, but I'm not sure where they are. I've had a good search but haven't found them. Although I've other places yet to search but so far not the opportunity. I know using these discs, if I find them, will reinstall recovery partitions.My laptop is a Qosmio F60 running Windows 7 Home Premium SP1.
I accidentally deleted a partition in Windows 7 (dynamic disk) using the disk management tools. That partitions is full of works and photos from the last 2 years. Are there any way I can recover the data? The space left by the deleted partition are still un-allocated at the moment. Do I need to create the partition prior to data recovery? I am using Active Partition recovery to scan at the moment. No result yet.
I have Win7 installed as my OS. In my desktop I have 2 different physical hard-drives. First one is 40 GB which is whole C-Drive without any partitions. Now the other hard-drive is having capacity of 500 GB, which I had divided into 4 partitions namely D, E, F (each 100 GBs) and the last one is G-Drive with 200 GBs capacity. Now, 2 days back I had used Win 7's inbuilt Disk Management tool and had shrunk my D-Drive by 15 GBs. Hence, I had got a new partition with 15 GBs capacity which I named as Z-Drive (just to recognise it very easily).
Today my work was over and I had no need for that Z-Drive anymore so I just explored 'My Computer and formatted Z-Drive using right-click context menu. After formatting Z-Drive I started Disk Management tool. I just right-clicked Z drive and clicked 'delete volume' so that I may get that much space as 'Unallocated' and then I would again extend the D-Drive (or so I thought). But when I deleted my Z-Drive, don't know how but G-Drive also got deleted along with it and now both Z and G drives are shown by green color in Disk Management tool and they are showing their capacity (15 GBs and 200 GBs respectively) as free space!
I have a lot of crucial and important data and files on G-Drive. How this G-Drive got deleted automatically along with Z-Drive?? And I haven't formatted G-Drive, are my files and data still present on G-Drive? After all this I right clicked 200 GBs partition (G-Drive) and selected 'New Simple Volume' and followed the steps accordingly (I had checked 'Do not format partition' while creating 'New Simple Volume on that green colored 200 GBs space) but this tool waits for 3-4 minutes and gives error message as "The operation failed to complete because the Disk Management console is not up-to-date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart Disk Management or restart the computer".
I had refreshed and restarted the computer several times after that and tried to create that 'New Simple Volume' but every time the same error-message pops up. Is my data still safe on that 200GBs space (as I had checked 'Do not format partition' while creating 'New Simple Volume')? How I can convert that 200 GBs space into G-Drive? I have a lot of important data and files on G-Drive!
Well as you know kids play on the computer and so, my partition from which windows 7 boots got formated and cleaned out however there is another computer that is the exact same as that one, is there any way I can extract the partition from that computer and turn it into an ISO place it on a bootable USB disk and boot from it?
