i upgraded from xp to windows 7, before i could stand in front of my pc for 3-4 hours without my eyes tired, now...in max 30 minutes i have a head ache. could you tel me what can a do about it? i have a toshiba l300 laptop with rezolution 1280x800 refresh rate 60 Mhz (i cant modify this) and no video driver instaled because i didn't found one. i tried modifiing the brightness but nothing,the same problem.
View 4 RepliesFew days ago I caught a virus (at least I believe I did)... Used Malwarebytes and found 7 infected files in my Windows Folder. The first few syptoms of my OS was the resolution of the screen changed to 1024x768 (it should be 1920x1080) and is stuck there. The refresh rate changed from 60Hz to 59Hz, when I tried to change it back, the screen just flashes black but the tab still says 59Hz. So I reinstalled Windows 7 with the upgrade option from the OS disk, hoping to fix everything. But it didn't...
My bios was also messed up, everything was reset and edges of my screen was cutten off. The booting animation of Windows 7 is now changed to the Vista's booting animation. I reflashed the bios and that fixed that, now I've done a clean install of Windows 7, formating C: then installing. But all problems still persists... even there is no more virus found by 5 anti-virus programs. I'm still stuck in 1024x768, Windows 7 thinks my hdmi cable is apparently a dvi cable, the refresh rate is still 59Hz, the booting animation is the Vista's one.
I recently upgraded from Vista Ultimate 64-bit to Windows 7 Ultimate 64-bit. I have a problem with the resolution now. The monitor I use was supported in Vista for resolution 2560x1600 but now the highest I have is 1280x800. I can't get it any higher, when I go back to Vista /same Dual-link cable, same monitor, same PC/ it shows 2560x1600 correctly, once I go Windows 7 - it only displays 1280x800. I have tried every driver update /Dell monitor3007WFP, ATI Radeon HD6950/ but nothing works. I first thought its my monitors' driver problem but after I researched online, it seems that many people have same problems with the resolution once they go Windows 7 /no matter the pc or monitor brand/. How to able to run this at 2560x1600 resolution.
View 4 Replies View Relatednew to the forum and new to Windows 7 and new to laptops so please be patient.
I bought a lenovo g550 laptop a few weeks ago.
it came with Windows 7, I have downloaded all the relevant Lenovo drivers and updates
and installed all of them!
My problem is that Windows 7 recognizes the screen as generic pnp monitor and doesn't let me change the refresh rate above or beneath 60hz.
My screen is flickering in the background and it is annoying as hell!!
is it because of the refresh rate or is it something else?
I cant find drivers for the screen anywhere !!!
I just installed Windows 7 64bit to try it out and so far its a pretty nifty change from xp, however if I can't solve this problem I'll have to change back to xp.
I have a 19" Samsung Syncmaster 957mb CRT monitor, the native desktop resolution is 1280x1024@85hz , but I run CS 1.6 in 800x600@100hz usually, however when I launch CS now, with the same launch options as I had in XP, the game starts up in window mode.
If i remove -freq 100 (forcing the monitor to 100hz) in launch options, it starts fullscreen in "800x600", however if i check my monitors OSD and look at the display timings, its tells me that the current resolution is my desktop resolution (1280x1024) and the same refresh rate, 85hz.
edit: To be short, the game is supposedly in 800x600, yet my monitor believes itself to be in 1280x1024?
Currently I can't find drivers for my monitor, so it only shows up as a PnP monitor, but this shouldn't be a issue, and my nvidia drivers are up to date.
how can i raise the refresh rate in dell inspiron 5050 from 60 h to 75 h ?
View 2 Replies View RelatedI have gone into my advanced settings and determined that the only 1 option there for refresh rate is 60 hertz. Does that mean I can go no higher? Or is there some witchcraft behind this?
View 2 Replies View RelatedI built up a PC a couple of months ago. It has an ok spec, Phenom II 550 x2, NVidia GTX 250, 4b ram, 500gig HD, 620w PSU. Windows 7 Eval. 7100.
From the first couple of days I noticed an issue that looked like incorrectly setup refresh rates - there are wavy lines accross the entire screen, and is particularly noticeable on highlighted text and the side edges of windows. I made sure the frame rate was correct, both in Windows and according to the GFX Card. I have tried all the settings but have settled at 75hz. This is the best setting but does not get rid of the problem.
I have the most up to date drivers for my GFX Card and Windows 7 is up to date too.
The intensity of the problem can fluctuate. Right now, its fairly minimal and only visable if you are looking. It can however get to the point where its becoming hard to read text, or at least tiring because you have to strain some more. This can happen at any time. The only link I have found is to games, as both World of Warcraft and Borderlands will intensify the isse, both ingame and in Windows. I am fairly sure they are set at the correct resolution and refresh rate where possible.
What could this be?
Further info, three weeks ago I turned the PC on in the morning to find the 'power' button unresponsive. After some waiting and several attempts it eventually turned on but I got a 'no signal' display on screen. Later I resorted to jump starting the PC without the power button, using a screwdriver to connect the prongs - after doing this, the power button has been fine although it took another day for the no signal message to go away and normal viewing return. This problem has not repeated since.
During this the fans were fluctuating a lot, audibly so. This dissapeared mostly along with the above problems, but I still think it sounds like the fans are fluctuating infrequently, particularly on initial bootup. I have no software for changing fan speeds, as far as they know they run at the speed I set physically.
A lot of this seems to point at the GFX Card, although I am a little more inclined to think it is the power supply, or the availability of power for each unit. But I really don't know. Either I can find the solution online or I take it to the shop and pay for a repair, not that its easy to even tell them what they need to repair.
The PC runs fast and with relatively few crashes besides that one weekend and this persistant display problem.
Ever since I retired my huge CRT monitor, I have been very unsatisfied with the performance of my 75Hz maximum LED monitor. Don't get me wrong, it's great for movies and everyday use, but for gaming it has done nothing but leave me yearning for something with a higher refresh rate.
I see that there are 120Hz 3D 'gaming' LEDs and have been poking around these waters. I have heard from sources that Benq used to make one of the best 120Hz monitors, but has since been discontinued. So have others, as I see them as 'unavailable' on NewEgg or insanely high priced elsewhere. Are these 120hz 3D monitors a bad idea to purchase? Are there any other options? I can't stand 75Hz in-game any longer!
I use a Gateway HD monitor, it's currently set to 59 hz, I need to get it up otherwise the monitor will just shut down while I'm playing games. I've tried everything, I tried to change it in the nvidia control panel but it just default back to 59 hz. I've tried the advanced settings in screen resolutions and the result is the same.
View 4 Replies View RelatedI believe it is set at 125 hz default for Windows 7. Is there any programs that can override and make it go up to 250 or more?
View 2 Replies View RelatedHow to Change the Screen Refresh Rate in Windows 7 ?
View 0 Replies View RelatedI have a 17-inch Toshiba laptop with a resolution of 1600x900 and a refresh rate of 60 Hz. However, on some backgrounds, I can clearly see my screen flickering. With the preservation of my eyes in mind, it would be greatly beneficial to know if I can increase this or not. I go here: Quote: Control PanelAppearance and PersonalizationDisplayScreen Resolution and click "Advanced Settings". Under "Monitor Settings", the pull-down bar only gives me the option of 60Hz (the "Hide modes that this monitor cannot display" is whited out). Is it possible to increase the refresh rate?
View 9 Replies View RelatedHow to Create a Custom Screen Refresh Rate with NVIDIA Control Panel in Windows ?
View 0 Replies View Relatedi by mistake changed my refresh rate to 100 Ghz in now my monitor is displaying "out of rage" message, i changed it from intel someting in the control panel, and now i am not getting that option in safe mode?.
View 3 Replies View RelatedBack in Windows XP, I was able to increase a PS/2 mouse's sampling rate from its default setting to 200 Hz at `Device Manager > Mouse > 'Name of Mouse' > Properties > Advanced Settings > Sample Rate` (like this [link]), but this setting is now gone in Windows 7. Is there another way to increase or change a PS/2 mouse's polling/refresh/sample rate in 64-bit Windows 7?The mouse uses generic installed-by-Windows default drivers back in XP, and the same with Windows 7.Edit: The screenshot is not from my PC. I just got it somewhere in the internet. It is just to illustrate how to edit a PS/2 mouse's sample rate back in Windows XP.
View 6 Replies View RelatedFree download ati radeon 4650 driver 1280x800?
View 2 Replies View Relatedbanging my head with this issue...i have an ati radeon hd 5850 and samsung syncmaster 2233SW monitor....in the games the resolution being displayed is very low, somewhere in the 1280 x 1024 type of regions...though in the game settings its showing 1920 x 1080 .rivers are latest...11.12 amd vision engine control centerbtw my desktop resolution iv put at 1280 x 800 ...wen i put it at 1920 x 1080 in the desktop d sides of the screen get cut...evn my monitors auto adjustment function doesn
View 3 Replies View Relatedi was wondering can you modify welcome screen on windows 7? And if so, how? please tell me because its very red and ugly.
View 1 Replies View RelatedWhen you put your mouse on a folder, without clicking on it, it'll tell you few things. Is there an app that modify this to make it show (much) more things?
View 2 Replies View RelatedWhen you create a shortcut in Win 7 the name of the shortcut has the word "shortcut" appended to the end of the name.I simply want to change this so the name "shortcut" is in the beginning of the name. (like in earlier versions of Windows i think).I have found instructions online for adjusting the registry to remove the word "shortcut" totally...but i cant see how to just move it to the beginning.
View 3 Replies View RelatedI have got 4 hdds two IDEs (each one 40 GB to be used for storage purpose) and two SATAs (Seagate 500 GB and western digital 1 TB).SATA Seagate 500 GB has two NTFS partitions named as show below C name as ST_OS (for OS windows 7 ultimate 64 bit) and G named ST_STORAGE (for a storage purpose) I can rename them to whatever I like,[URL] SATA western digital 1 TB has two NTFS partitions as well named F and J ,,,,, whenever I (username that has admin privilege) rename (Right click properties then rename or through diskmgmt.msc tool to edit the drive name) those two partitions as below :[URL]
F --> WD_STORAGE1
J --> WD_STORAGE1
I won�t be able to see the names, only I see the letters ( i.e. F and J ) for them While when I access my computer through the � Safe Mode� (F8 boot process) I was able to see the name and letter for the SATA western digital 1 TB , please see the snap shot below :
F --> WD_STORAGE1
J --> WD_STORAGE1
[URL]
I have shared those two partitions [ F --> WD_STORAGE1), J --> WD_STORAGE1 ] on my home network I can see names and letters on other computers that have those two partitions mounted to them (map network drive)
I have tried installing Win 7 about ten times now (64 bit version) on about three different physical PCs and in around 6 VMs and always end up with a system that does not even permit itself to modify software that it has installed. Sometimes, an installation will run with no errors right to the end and then abort because it cannot write the start-up link to the programs start menu. There are hardly any options possible when installing Win 7 so I don't see that I'm setting a wrong option anywhere.
View 1 Replies View RelatedI can not seem to find a way to change the default DNS TTL from the default 300 seconds.
View 2 Replies View RelatedWhen I open the indexing options in control panel, it does not list anything - says its "waiting to receive indexing status".I located a "search" file in my directory with subfile "indexed locations" that lists literally everything on my computer including emails. Normally when I want to search for something on my hard drive I would not want emails to be included in the search. I also found "sticky notes" in that same subfile? I'd like to modify my search indexing but I can't get into the list of locations.
View 3 Replies View RelatedI have Dell Optiplex GX260 system. I intalled Windows 7 Ultimate on that. The resolution of screen is fine but it is not supporting 1280 x 1024 resolution and videos are not playing properly. It was not taking audio drivers as well but when I ran the SoundMax drivers for XP in compatibility mode they were installed. But display drivers are not getting installed. I even tried the various driver from Nvidia for XP/Vista/Win 7, but none of them works.
View 1 Replies View RelatedStill getting used to w7 and find little things that bug me, not really important, but is there a way to modify the way Explorer operates? Specifically, in xp, when one opens a file on the tree, the sub-folders also drop down on the tree, and adjust to the visible screen. My w7 (x64, sp1) doesn't do either of those things. Is this changeable?
View 9 Replies View RelatedCan we modify or add a custom columns on Explorer?
i just installed dBpoweramp and i can see a complete metadata info about the audio files via popup info & Audio Properties tab (created by dBpoweramp), i consider some of them are advanced info like encoder settings, accuraterip results, CD catalog, etc. can we add a custom columns on Explorer for these info?
and tried to add an extra columns like 'compression ratio', 'encoded by' & 'bit depth' on Explorer but it shows nothing. I can see via dBpoweramp for some audio files, but not on Explorer, it just blank.
I was wondering if it was possible to modify one of the Windows shortcuts that comes with the program. I haven't been able to find a good answer yet. Basically I just wanted to switch the commands ctrl+N and ctrl+shift+N in Explorer. Is this possible
View 1 Replies View RelatedI need to be able to give permissions back to the users to edit the registry which has been disable by GPO.I am trying this:set KEY="HKLMSYSTEMCurrentControlSetControlSession ManagerEnvironment"Icacls %KEY% /t /c /grant:r "USERS":fI get: "The system cannot find the path specified"When I try regini.exeI get:or: Registry editing has been disable by your administrator
am running cmd.exe as Administrator from a user on the Administrators group.
In the Manage Wireless Networks window I have three wireless networks. Two of these networks are workplace networks (let's call them Work1 and Work2, the the other is my home network (Home1).
The Work1 network is grouped under Networks you can view, while Work2 and Home1 are grouped under Networks you can view, modify, and reorder. All three of them are set to automatically connect.
When I get to work and turn on my laptop it automatically connects to Work1 by default, but I actually want it to connect to Work2. I can manually disconnect from Work1 and connect to Work2, but I'd much prefer it to just automatically connect to Work2 by default.
The problem is, I can't modify or reorder Work1; I can't even remove it. If I view its Properties, I see a message saying "These settings are managed by your system administrator." and all options are greyed out.
I have system admin rights on my laptop, and I have spoken with the system administrator at work