I was having problems with an audio device yesterday. In my attempts to get it working, I tried to disable it and then I was going to reenable it. However after disabling it, it completely disappeared from my list of audio devices. So I can no longer use it. How do I add it back?
View 6 Replies
how do i install back my audio output device for window 7 ?
View 1 Replies View Relatedfrom the digital audio device? every time i plug in my $20 speakers i got from target, the audio device changes from my soundmax driver (which comes thru the lappy speakers) to a digital audio device in my little speaker icon thingy and i don't know how to manually change it back except thru reinstalling the drivers and rebooting a bunch of times,when i go to properties it only shows the enabled device and i can't find the other output option. if i reinstall the soundmax drivers it switches back to laptop speakers but this is obviously a hassle.
View 2 Replies View RelatedI have been trouble shooting my sound for quite some time with no results. I've deleted and reinstalled drivers, checked bios, etc. no luck.here are my speccy details
View 10 Replies View RelatedIf i remove/uninstall 'High Definition Audio Device' Driver in Device Manager will Windows Update find it again?Because im having crackling issues basicly the sound is really choppy and choppy basicly and it makes my ram go to 100%
View 2 Replies View RelatedI turned my computer on to find no audio playing. My main audio device plays bac audio from DAW just fine but if I load a video in WMP i get a code C00D11B1. If I try to play a test tone in the sound settings I get "Failed to play test tone". I have other audio devices connected and also get the same errors which makes me think this is a registry error or some windows communication error. The only thing I think might have caused this is when I was trying to get my ram to run at 1866. This is a new build and the ram should run at this speed as it is in the QVL but that is another issue. I should also mention that I have tried reloading the device drivers, updated the BIOS, and restyored windows from a previous state with no change.
Asus sabertooth 990fx
Fx-8120
4x 4gb g skill Sniper
Visiontek HD 5770
2 seagate barracudas in RAID 0
I installed Windows Vista using my computers recovery disk. Everything was working fine until I updated windows. After the last restart (after the updates) I notice that I am getthing this icon on the bottom right:And if I try to open the Volume controls it opens this window:I removed Windows Vista and now Im using Windows 7 (and thats why I came to this forum) in the hopes that it would fix the issue but it didnt. On Device manager I have no Sound devices:
View 2 Replies View Relatedhow do i get my deleted bluetooth device back
View 1 Replies View RelatedI have this motherboard. and get no audio when I plug in headphones in the front or back ports. I'm running win 7 so there aren't compatible drivers available on asus site, I tried downloading the vista x64 and installing them in compatibility mode but the device manager shows "High Definition Audio Device" so I think it's still using a generic windows driver.
Also tried these: Realtek
Sound>Playback shows Digital Audio (S/PDIF) and sound bars move while playing a mp3 or movie but still no audio. Usually speakers and headphones show up I though? I don't even see them when I choose show disabled devices. I tested usb headphones and got audio but I really need those 3.5 jacks to work.
The audio on this board is: Realtek ALC662, 6-CH High-Definition Audio CODEC
I've also reset the bios, and the mic shows up and receives data when plugged in but still no sound.
I just had to move my graphics card to another slot for access to another PCIE slot. And my back audio sound jack stopped working. Ive tried with my monitor speaker and headphones and it does not work. Specs:
windows 7
i7 3930k
32gb of ripjaws Z
noctua nh-d14
thermal take level 10 gt
x79 sabertooth
My front panel audio does not work either. I got bios set to HD audio and i am using the hd audio plug
this device is being used by another application. please close any devices that are playing audio to this device and try again. is what it is saying when i try to test , its hdmi ti hdmi from pc to tv i got picture but no audio and cable works fine on frineds pc and tv?
View 2 Replies View RelatedFront Jack is broken,The back one isn't shown in Audio Proprieties
View 9 Replies View RelatedI want to ask if I rolled back to previous version of a device driver will this cause corruption or damage to the laptop as after I have updated to a recent version there seems to be some issues and I want to roll back?
View 6 Replies View RelatedSince installing it, I had a problem with my sound, which was as the title states, no audio output device. I've been through several drivers, none of which worked, and I've also tried sound max, which has in fact worked, however I can't stand the little sound bar when you up or down the volume, and it's fairly unresponsive when I use the buttons on my laptop. So in all fairness, I just want the actual driver designed to work with this laptop.I do have a version of Windows 7 Home Premium, not too sure if it'd make much difference, however I'd rather not go through another OS install as I've got most of my stuff already set up on this now!I am good with computers so don't be afraid to get technical, but I just need another angle on this because it's most likely just something I'm overlooking.
View 3 Replies View RelatedIn the Sound options window, you would see your several devices under Playback and Recording Devices. The thing is I have audio devices that have a number next to them, eg. "2- Creative Sound Blaster". Windows always does this, but I would like change these device names, and I don't know how.
View 3 Replies View RelatedFor a while now(speaking in month terms), my sound would be working just fine. But sometimes when I put it into hibernate(for the night) and turn it back on, my speaker icon would have a red X over it. The only way this goes away is if I leave the computer off for a long time or, spam restarts(lol). What can be the problem here? My guess is that it's getting old or something.
Also, when I try to find it in the device manager, it doesn't show up. It can't even detect it either.
Also, I reinstalled the drivers yesterday, and it worked again....for another few hours. So when I retried doing that, windows update didn't detect the sound card.
I lost my audio device and have tried repeatedly to reinstall it with no such luck. It is Realtek HD Audio. I have Windows 7 x64
View 3 Replies View RelatedI have an acer aspire 5610z and i know it is not compatable with windows 7 according to acer but everything works apart from the audio!when i go onto device manager there is no audio tab but when i go to system> there is a "high definition audio controller" which i have been trying to install the audio drivers to because the usual audio device is not there in device manager.I have done a fresh install and updated the majority of the drivers but i cannot find the audio one anywhere ive tried downloading the vista one and running it in compatibility mode and it is a realtek one that is reccomended.
View 8 Replies View RelatedI have a HTPC in my living room which since updating on the weekend now has no sound I have found similar issues and posts on various forums from searching all afternoon Sunday but none with a solution (that works for me) other than a full Windows 7 reinstall. I have a PC running onboard realtek (ASRock ConRoe 745 DVI), which was working perfectly until Service [pack one update and two other updates this Sunday. I unfortunately discovered for some reason the System Restore on this machine was set to off so that is not an option The audio symbol bottom right says there is no audio device installed, however if you look in the device manager there is the correct Realtek device installed with no exclamation mark and it is reporting as working correctly. If you right click on the red cross and click playback devices it takes you to the realtek device properties and it is set as default. (In fact if you unplug the speaker jack the PC advises you of this even though it says no audio device installed). If you click on the red cross it launches the fault detection wizard and returns "Audio Device is Disabled - Not Fixed"I have tried uninstalling the device - scanning for changes - reinstall Repeated the above but deleted the device drivers Tried a SFC scan and a Chkdsk Scan (No errors) Tried with the Microsoft default high definition audio drivers and the latest (and not latest) realtek drivers Tried disabling in the BIOS uninstalling and reinstalling after re-enabling Tried uninstalling the updates and repeating the above Tried uninstalling the service pack and repeating the above Finally unenabled the onboard card and installed a PCI soundblaster Audigy - Same problem?
View 7 Replies View RelatedWindows 7 Home Premium x64 on HP-DM1-4050us laptop, disabled a couple of unneeded services, now headphones not working, no idea which service caused this but I didn't touch either of the two required audio services (Windows Audio, Windows Audio Endpoint Builder). Audio now plays fine through speakers, but plug headphones in and it's mute. Headphones work fine with other audio devices like my phone, though. Triple checked I'm using the right jack and plugging in completely. I ran the Audio troubleshooting wizard, and it appears the problem is that there are two devices, "Speakers and Headphones" and "Communications Headphones", and the former is the default audio device, the latter is the default communications device, when the latter needs to be both. However, right clicking the latter device and hitting "Make Default Audio Device" has no effect, the former option remains the default audio device. Anyone know what the problem is here, why the default audio device can't be changed, or what windows service could have anything to do with this (besides the two primary audio services)?
View 8 Replies View RelatedJust need to know how to fix this for my friend
View 2 Replies View RelatedI have an Asus P6T motherboard with Realtek ALC1200 on board audio and Windows 7 64 bit OS, DirectX 10, Audio Driver version 6.0.1.5859. The sound works normally for all audio functions. I installed Nero and went to use the Wave Editor application to record a song from the web and got the message "Unable to open recording device". Going to Options > Device Settings > for an Input Device there only shows "MMEwave mapper)". There is no other input device listed. In Device Manager the "Realtek High Definition Audio" device shows as the only device. Going to "Manage Audio Devices" and the "Recording Tab" there shows only "Microphone" and "Line In". There is no "Realtek Digital Input" device listed (as I've seen in web screenshots from others). how to get an input device listed to use with Nero recording?
View 9 Replies View Relatedi have a prob whenever i restart or shutdown my computer, my external audio interface gets disabled on startup. and i always gotta turn it on under device manager which is pretty tiring. how do i fix this? i have already disabled the onboard soundcard. and i can't uninstall it cause windows automatically install the drivers for it. that's why disabling it is the only option.
View 2 Replies View Relatedi have 4.1 surrounding system for my PC. it was perfectly worked when i had Windows XP, but now i have windows 7, now its not working properly.
Can any one solve this problem?
i am having an error with my speakers, it says no audio device is installed, i have visited alot of these forums but no real solution, i did direct X diagnostice tool test and it says i have no sound card installed...i really need help with this i have been at this for weeks. PLEASE HELP ME. I recently upgraded from windows xp to windows 7 my speakers were working fine b4 that but now there is a red X on the speaker icon, device manager says that the device is installed and working okay, this is driving me nuts i have been at this for weeks, i have windows 7 and a 32 bit operating system.
View 2 Replies View RelatedMy computer say I have no audio device. I used to have it but I may have cleaned out my programs and deleted it. What do I do now?
View 4 Replies View RelatedI posted my message yesterday.
View 2 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows 7 Home Premium , 32 bit
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-60, x64 Family 15 Model 104 Stepping 2
Processor Count: 2
RAM: 3006 Mb
Graphics Card: NVIDIA GeForce 7150M / nForce 630M, 64 Mb
Hard Drives: C: Total - 226384 MB, Free - 138411 MB; D: Total - 12087 MB, Free - 2026 MB;
Motherboard: Quanta, 30D1, 85.26, None1
Antivirus: Microsoft Security Essentials,
i have no sound and there is no audio devices found in he device manager i tried to re- install windows 7 upgrade but the same thing no audio output is in stalled error on the speaker in the task bar?
i have a HP Pavilion dv6000. i upgraded from windows vista to windows 7. there's a red X on my volume and it says no audio output device is installed. in the Device manager there is no sound, video and game option-in the sound device the playback is blank.
View 1 Replies View Relatedwith the audio and tough pad drivers not working in windows 7. I up-dated windows XP to Win7 ultimate, and now their is no sound and the tough pad does not work. These are the error codes from msinfo32!
A.High Definition Audio DeviceHDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_103C30B2&REV_1000\4&166FA85F&0&0001This device cannot start.
B.Base System DevicePCI\VEN_1180&DEV_0592&SUBSYS_30B2103C&REV_0A\4&1753FBD&0&4BF0The drivers for this device are not installed.
[code]....
I'm pretty sure you guys have seen this before; sound icon with a little x over it. I'm posting 2 pictures up to, maybe, give you guys an idea of what the issue can be.Additional information: the laptop at hand tries to install new drivers but fails everytime. No idea why. It tries to install a bluetooth driver.
View 5 Replies View Related
