Wireless Not Working After Upgrade To Windows 7 Ultimate
Sep 6, 2012
I have a new laptop running Windows 7 Home Premium 64-bit. I installed Ultimate and now there is no way to make an Internet connection. The button that had the symbol where you click and connect to a network with Wi-Fi has disappeared. I tried turning the router on and off as well as plugging the laptop into the router with a cable but neither have worked.
So I decide I should either reinstall Home Premium. I put in the CDs that had the drivers, but when I tried to reinstall I got the message "Fail to format disk 0 partition 3" .
Also I was wondering if I should try to install Windows 7 Ultimate again. My main purpose was to run Virtual PC for Windows XP so I could run 16-bit programs, but I would also like to know if I can simply install XP on a computer running Window 7.
Recently upgraded my Vista Toshiba Laptop to Win 7 Home Premium 64-bit via the Microsoft website, and now my wireless internet is not working.
I am connecting wirelessly through a router. I ran the windows troubleshooter, which says it fixed the problem, but I still cannot connect either through IE or Firefox. I confirmed that my IP address is valid via the CMD box... however, when I test connect by using ping <default gateway> I get the error "syntax command is invalid".
All other laptops in my house are working fine, and when I took mine to a local coffee shop I connected with no issues.
I've upgraded my PC to Windows 7 Home Premium today (from Win XP Pro) and now the wireless network adapter does not work.
The adapter is a Netgear WG331 v1. I've tried downloading the drivers from the Netgear site - both those for the v1 and the newer drivers for the v3 and neither have fixed the issue.
I've used the Win 7 troubleshoot feature to install this driver (it is meant to be included within Win 7) but this does not work either.
I've also tried plugging the ethernet cable that normally goes directly into the back of my Netgear router into the PC, in order to provide Win 7 with internet access. However, this has not worked, with the connection apparently not recognised by the computer. I've tried to update the drivers for my PC's motherboard to remedy this, but have been unable to find any that are compatible with this version of Windows. The motherboard is MSI n1996.
Windows 7 troubleshooter shows missing drivers for the following: Multimedia Audio Controller (two of these), PCI Input Device, Ethernet Controller.
What I'm banking on is that an internet connection will enable Win 7 to locate drivers for all of these, but I am currently unable to make this happen. The internet connection is running fine and the wireless router is broadcasting the signal properly (I am accessing it right now via my laptop).
I bought the full retail Win 7 Ultimate and trying to upgrade Windows Vista Ultimate to Win 7 Ultimate, both 32bit. I get to the Expanding Windows files to 21% and nothing. The program is still running and stuck at 21% but after waiting 3 hours I shut power off and Vista was reinstated. Why can't I get past 21% Expanding Windows files? I want to use the upgrade because I have a ton of programs on my Vista and don't want to spend days reinstalling them.
I've tried to upgrade from Vista Ultimate 32 bit to 7 Ultimate 32 bit numerous times now, all with the same result: a BSOD during the install process, which I get during (what I think is) the final step called "Transferring files, settings and programs."
The installation compatibility test warns me about my Nvidia drivers, which I've attempted to both remove and upgrade to the latest version, but that doesn't seem to make a difference (I still get the warning during the compatibility check, and I still get the blue screen). I'm not sure that's even the problem, either. I can't (easily) remove/replace the video card, since my mobo doesn't have onboard video, so I'd hopefully be able to avoid having to do that.
The error in the blue screen is a nebulous "REFERENCE_BY_POINTER" message. The technical information is "STOP: 0x00000018 (0x00000000, 0x86478030, 0x00000002, 0xFFFFFFFF)."
As a zip file, I've attached the setup log, error log, compatibility report, and what I think is the setup dump file, all of which I found in C:$WINDOWS.~BTSourcesPanther (I believe that's the right place to look). The logs complain about BthMig problems, which I think has something to do with bluetooth, but I don't have any bluetooth peripherals. I've uninstalled things that I thought might have some bluetooth things in it, like MS Intellitype (maybe a stretch), but again, no difference.
System specs: AMD Athlon 64 X2 6000+, on an Asus M2N SLI Deluxe, with 4 GB of ram, and an Nvidia GeForce 8800 GT. The hard drive I'm installing (upgrading) on has about 100 GB free.
I'm trying to upgrade a computer from Vista Ultimate (32 bit) to 7 Ultimate (32 bit) and I keep receiving this error message:
"This installation disc isn't compatible with your version of Windows. To upgrade, you need the correct installation disc. For more information, check your computer's system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select Custom (advanced)."
Now, I double-checked all the system requirements and the system is compatible with 7.
Today I began installing windows 7 ultimate on my laptop. However, I grabbed my ultimate N disk instead of my Ultimate disk. is there a way to upgrade to normal ultimate version. I have setup windows media center on every tv in my house and would like to have it on my laptop lol. I would realy rather not wipe and reinstall so i dont have to install all the drivers and anitvirus again...
I have a Dell XPS 410 Desktop with Windows XP Pro SP3. Specifications of the machine are: Windows XP Professional SP3, 4GB DDR2 SDRAM, 768MB nvidia 8800GTX video card, 500GB hard drive (2 x 250GB as RAID1)
I would like to know if I can upgrade to Windows 7 Ultimate without doing clean install or dual boot. Is there an easier way to do this or do I have to do Clean Install.
I've got a code that allows me to upgrade to Ultimate, just wondering I am current running Home premium 64-bit, if I upgrade will it delete any of my files or restore to factory settings or do a master reboot ? or will it upgrade and be the same as before just running Ultimate instead ?And Is ultimate worth upgrading to ? does it make my computer better ?
I have a pretty basic laptop (5-year-old Dell Vostro 1000). I use it only for web surfing, e-mail, and "tinkering." I recently upgraded RAM to 2GB (all it will hold), replaced the hard drive with an SSD, and upgraded from XP to Win 7 Home Premium (32 bit) just to see what would happen. There were obvious performance improvements, and I'd probably see more if I had faster internet service (only thing available here is 768K DSL). I know it's like putting lipstick on a pig, but now I'm curious to know if I could upgrade Win 7 to the Ultimate version (as I said, I like to tinker). Is there a 32-bit version of Ultimate? Windows Upgrade Advisor says this machine will not support 64- bit, though I'm awfully tempted to try it anyway. What would Ultimate get me that I don't already have? Is this a wacky idea I should just forget about?
I just got my windows 7 ultimate. I was able to successful install it on a new hard drive on another computer. It was pretty good so i decide to upgrade my vista home premium. When ever i tried to upgrade my vista home premium i would get an error. I use the windows 7 upgrade advisor and it says i can upgrade to win 7 ultimate. Im on vista home premium x64
I have a computer where i've just installed W7 Premium 1 day ago and have activated the key successfully. If i now use the anytime upgrade and enter an Ultimate key, do I then lose the Premium key or can i go ahead and install it on another computer?
From windows 7 64 bit ultimate sp1 to windows 7 64 bit ultimate sp1.I do have to note I accidently deleted a partition with 100 games some weeks ago which caused some not clean leftovers in registry, but they are only games, not a single system/ application. So I don't think this is a cause for upgrade to fail.The point of this inplace upgrade repair is to fix all the security/ settings / rights to default.Since I have security issues, acces denied etc. and I had tried to fix them with all sorts of commands, Icalcs, subinacl etc. (for full details on security issue view my topic created here ul...)It said it had trouble with following devices when checking on compatibility.AWBN4A-HW IDE controller (yellow exclaimation mark) Alcohol 120% Daemon tools Dungeon siege legends of Aranna.But I don't even have any IDE devices. Only Sata.So I uninstalled the IDE controller and other programs and tried setup again it went through.I have also run windows 7 upgrade assistant and gave no trouble other then some videogames that were not recognised or might not work (i have 200 of em installed)After the upgrade it rebooted and it said it had failed and was reverting back to old..This is the setuplog I took from the upgrade folders: setupact.rar (1,22 MB) - uploaded.to Seems to be stopped @ 63%..Could someone tell me why my upgrade is failing?
I bought a new computer with win 7 home basic and 2) I want to reinstall os of this computer which has been upgraded to win 7 ultimate from home basic. So I have a choice to reinstall the win 7 ultimate upgrade to this computer again or to the new computer which runs faster. But either way, how can I do it? I think (this is awhile ago) when I was doing upgrading to this computer I paid on line and got an email with an activation code and instructions. So my questions are 1) Can I find the code from this computer? 2) Can I use the code on the new computer? 3) should I format this computer first before I activate the upgrade copy on the new computer to avoid conflicts that both computers are using the same upgrade copy? The reason for the last question is I'd want to move every file to the new computer before I format this computer.
I do not have a SP 1 disk as i downloaded andbinstalled the SP 1. Now i want to do an inplace upgrade but when i try with my "non" SP1 Windows 7 disk i get an error message saying the winows ver i have installed is newer than the version i am trying to install.What are the steps to inplace upgrade my SP1 ver without an SP1 Windows 7 disk?
Just this week I noticed I had a Windows Update icon in my system tray. When I opened it up I got an error stating that it could not check for windows updates. It also had the error code of 80070490. I've tried running the Readiness Tool that was suggested in the Windows knowledge base article but that didn't fix it. The only other option that I have been able to find is to re-install (or re-upgrade) my operating system. I am running Windows Vista Ultimate on this laptop and I'm not sure if I have the CD/DVD of the operating system as the OS came installed on my laptop when I got it (from Lenovo). So, I've decided that since I was going to upgrade to Windows 7 at some point, I might as well do it now.My question is I'm wondering if this Windows Update problem will somehow hamper the upgrade to Windows 7. Does anyone know? I don't want to buy the upgrade package and try to preserve my files and program installations only to have this Windows Upgrade piece be a key component of the upgrade to Windows 7 and it all fail.
i tried o upgrade my system to windows 7 ultimate but in doing so i wiped out all memory how can i get it back to factory settings without spending a fortune?
I have had this problem not being able to turn on the wireless radio for months. I have to get it turned on now. When I press <fn> F5 I can see the wireless radio is off. I see the power on button. When I select the power on button nothing happens. I expect the wireless radio to power on.I have tried fixing the winsock. I have run this MS fix at: How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista And I have run this bat file
** Start of bat file called renew-ip-reset-winsock.bat ipconfig /release pause ipconfig /renew
As stated in the object everytime Windows gets loaded it always forgets somethings in my wireless LAN connection settings.Either everything is set with automatic IP address (and I actually use TCP/IPv4 manual IP address + DHCP disabled in the DSL router) and automatic DNS addresses, or (if set on manual as it should be) something is randomly missing (i.e. the Gateway, the DNS address, etc., etc.).When rebooting I don't have the feeling that a task is force-closed or that something crashed so there should be no accidental loss of data (?).I use Kaspersky Pure v2.x + Webroot Spy Sweeper (this one with LAN control disabled).
i have a problem in my loptap the OS is window 7 ultimate my problem i have no wireless and i go to mobility but the wireless is off before the driver of my lenovo is window istarter i use Fn+F5 to on my wireless but wrightknow i dont have
Have Windows 7 Home Premium x64 which came with my SONY laptop. I have a new full copy of Windows 7 Ultimate and want to upgrade. Any issue with installing over my current home Premium install or do I need to go with a clean one?
I plan to replace Win 7 HP 64bit with Win 7 Ultimate 64bit on an Asus N53S, a replacement for a laptop that is now trashed and on which the win 7 OEM 64bit version had been installed to replace Win Vista. Is it possible to overcome Win 7 OEM being keyed to one computer MS protocol and if so, how is it done?
I have upgraded a machine from an Intel motherboard to an ASUS P8H61-M LX. New CPU and RAM. Before installing the new hardware I changed all drivers to standard drivers, did a system image to an external HDD. After installing the new hardware Windows hangs with 4 little colored dots on the screen (start of win banner?). A safe mode boot stops at classpnp.sys. The same thing happens if I try to boot from the WIN CD. I went back to the old hardware setup and tried to do a sysprep, but that failed with fatal error, but no more info. The HDD is set to IDE, using a PS2 mouse and keyboard. I cannot do a clean install as there is some very old software on the machine.
i have this older emachines PC i just picked up,, It has windows vista on it (yuk) along with a recovery partition to reset it back to factory specs. I shrank the C: drive and split the drive so i now have:
C: W7U D: Vista E: Emachines Recovery
Or well thats how im trying to get it set up BUT everytime i install Windows 7 the machine thinks it needs to be recovered and boots into system recovery options.
I bought an Acer Aspire One netbook with Windows 7 Starter on it, and I have a Windows 7 Ultimate installation DVD that I want to use to upgrade my netbook's OS. I put the DVD into an external DVD drive connected to my netbook with a USB cable and started the installation wizard.
I chose the "Upgrade" option and the installer said that I need to use Windows Anytime Upgrade for that. The problem with that is that I don't want to buy a new license, since I already have this DVD. How can I upgrade my netbook's OS from Windows 7 Starter to Ultimate with the DVD I already have?
A while back I purchased a retail copy of Windows 7 Home Premium which had both a 32 and 64bit disk. I installed the 64bit version on my PC, but subsequently purchesd and installed a Ultimate upgrade (via disk). This disk had a different key on it. Can I now use my old Windows 7 HP disk (64 or 32 bit) and key to do an install on another home computer?
My Notebook comes from the U.S. with Vista Ultimate. Now I want to upgrade to Windows 7 Ultimate here in Europe.
I heard that an in-place upgrade to Windows 7 is only possible within the same language (e.g. EN-US). Now I worry that I'll buy the wrong Win 7 version.
I know that my current Vista Ultimate is English, but how to find out which one (could be British as well)? Ist there a native OS language at all besides the language I set in the "regional and language options" in the control panel?
And is this important at all? As far as I know Windows 7 Ultimate supports 35 languages, so does it matter at all as long as I accept to install Win 7 in the same language like my Vista is?
