I have a Samsung Jack running Windows mobile 6.5 with a 2GB microSD card. In my previous Vista installation I would sync my music library to my phone with media player. When I reformatted and loaded seven I recopied my old music files to my new folders. Since then I have bought 2 new songs off Amazon MP3 and integrated them into my library. When I sync my library to my phone these two songs will not play. Media Player Mobile hangs and then gives me numerous error messages. All my old music plays fine, including songs that I previous purchased from amazon.
i'm running a windows 7 home premium 64 bit, and for some movies, the video will start in-sync for about 40 minutes, then slowly get farther and farther out of sync, making watching the video un-watchable after another 10 minutes. but it does not do this with all video types. it also does not do this with netflix, Internet, or anything else online.
i'm running a geforce gtx 660m, all drivers are up to date. the files that work are: mp4, files that don't work are: mkv, avi
those are the only files i have tried. it's done this since i got this computer a couple months ago
I wanted to ask if it is possible to set Windows media player to open as the default player inside media center.The reason that I ask this is that I find media center sound is very low quality. I am using it inside windows 7 ultimate X64. I also use Media Browser and have set it to use media player as an external player but it loses some functionality after something is played I have to restart media center and media Browser to play anything again because it will go back to menus but not play anything untill
I'm trying to sync my Sony mp3 player to my music folder on my w7 laptop. I have downloaded a couple of different sync software (freefilesync & dsynchronize), however, neither of these are able to recognize the sony walkman as a destination folder as it is not assigned its own drive letter under the windows file system (it appears only as 'Walkman' in My Computer). What can I do either assign the walkman its own drive letter, or to enable the syncing software to recognize the sony walkman device as a valid destination folder.
How can I make Windows Media Player stop updating media every freaking time I start it up? It always hogs up massive amount of CPU power and goes into (Not Responding) for a min while updating.I only add media files to the Windows Explorer Library so I can get indexed searches. I don't even use WMP to view files or anything. Just to burn some music CDs sometimes.I've tried deleting the files from the WMP library but the next time I open it up, it scans and updates all my files again! Is there a way to completely purge the WMP library and make it not update ever? I've unchecked every option that seems to make it scan and update but it still does it.Basically I want to UNLINK the Windows Explorer Library from the WMP Library.
I have VLC Portable as the default program for opening some video files, like .mp4 and .avi. And I have Foobar (portable) as the default program for .mp3.Usually the icons on .mp4, .avi, .mp3 files get updated with the icons of the assigned media players.But on this PC it's not working. They're still the same icons as if WMP was the default player.Does it have to do with the Standard user account? (Because on other PCs I run from an Admin account and I don't have such problems.)
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
A file called wmpntwrk.exe is consistently using 2.5GB of RAM and runs constantly, slowing down my computer. This is Windows Media Player. Norton frequently gives me an error message saying that 'Windows Media Player Network Sharing Device has high CPU usage' or something to that effect. It is running as a process the entire time my computer is switched on, regardless of whether or not I am using this program.
anyone knows if we can install WMP 10 on 7 x64?I really hate WMP 11 behaviors, I want it to be maximized at all, when opening it, it re-sizes itself to the size of media being played.Some times, it won't open media files and after a while says: "server execution failed".I have to re-open the media and it will open this time!Any Media Library, I hate it, I don't want WMP to be opened always in Library mode, I want it always in Now Playing mode.
Earlier tonight I found when I tryed to open a music file I got class not registered. I can use another player but when I choose windows media as my default player I get this error. It loads the windows media player then says this: Doesn't say class not registered anymore.
Media player won't rip CD's. When you go to options, Rip Music, there is no default location shown for the file. When you click "Channge Location", nothing happens. So I can't rip CD's in my version of Windows 7.
Would Windows 8 fix this or is there another fix I can use?
I have a Dell Inspiron 15 R running Windows 7 Home Basic. I changed the bluetooth name, but the smartphone only detects and displays the computer name when it searches for bluetooth devices around it. Funnily, my iPad 2 detects the bluetooth name and displays the bluetooth name of my computer.
Previously, the bluetooth name and computer name were the same. I changed the former, but the smartphones continue to display the computer name and not the bluetooth name.
My default is WMP for playing CD's and DVD's. I have a Toshiba NB 305 netbook, Windows 7. I copied a DVD from a friends LG Portable Super Multi drive (her computer is XP - in case this might be important?)to my external HD. Something from my Norton popped up earlier regarding GEAR software, but I did not understand it and so dismissed it, at the advice of a friend...I am not so computer savvy. Since then I cannot even access my Windows Media Player.
I have tried everything to get the vlc media player to install on my laptop which has windows 7. Ive done the troubleshooting with changing my security on my browser, tried downloading it from different sites, all to no avail. Im about to post a question on yahoo answers and see where that gets me. But first I thought I'd share it here.
I just installed a clean install on my 64bit machine with Windows7 Pro. Media Player is nowhere to be found. Searching the drive discovered hundreds of files that are not executable and have the registry naming system in them, also found several .dlls but no executable. Microsoft's site simply says that it is installed with the OS and there is nothing about how to add it. I did look through all the add windows features and did not find it. I also tried to find the .cab file on the install DVD to see if I could manually install it, but I could not find that as the file structure of install discs has changed since I knew how to do this before.
I am running a 32 bit version of 7 Home Prem. For some reason WMP is not launching from the its icons on the task bar or in the start menu, nor by trying to open a WMV file.
.dll has a version number of 12.0.7600.16667 where 12.0.7600.16415 was expected.Windows Media Player is not installed properly and must be reinstalled.Do you want to install the Player from the Microsoft Website?
*YES* *NO* "
When I go to download it again from the Microsoft Website there is no option to download WMP 12.
My WMP12 used to work. but nowadays, what it does whenever i try to open it is show its window for like 20 milliseconds, then close. My Encarta 2009 doesn't work well, it says it needs the WMP to play, so does my desktop gadgets. I think something happened. i tried using sfc/scannow but even it cannot solve the problem. i don't know what to do. I am currently in dilemma because most of the Win 7 features rely so much in wmp12. how am i going to use it if doesn't work? P.S. i also tried turning on and off media feature pack. it doesn't work. I am currently using Win 7 Ultimate, 2 GB ram, 1 GB vid card and Intel Duo P6100. my laptop is just a month old but its system is like failing
I can't seem to play DVD's using Windows Media player. I get this "Windows Media Player cannot play DVD video. You might need to adjust your Windows display settings. Open display settings in Control Panel, and then try lowering your screen resolution and color quality settings." I thought maybe it was my video driver, however, I rolled it back and it still didn't work. I installed the K-Lite mega codec pack, but that didn't work. However, the Media Player Classic which got installed with the codec pack works, although I don't really like the program. VLC wasn't working either, however, I reinstalled that and it's working fine now. I'm just curious as to why my media player won't play dvd's. It's the program that I usually used to play DVD's.
I have the Windows 7 RC 64-bit installed on my comp, and I have been using WMP12 for a few months now with no issues up until recently. It has been freezing constantly on me within minutes of starting a song from my playlist. After 2 minutes into a song, WMP12 will dim and I get a message saying WMP12 is not responding and needs to close. I do have a very extensive music playlist which I'm constantly adding more music to, so I am wondering if it's maybe too big for it to handle (about 20-30 GBs of music). [code]
Lately whenever my system is operating, Windows Media Player starts running without being invoked. When I try to end the process it just starts up again. It's eating up lots of CPU time and slowing down my system
When I select Windows Media Player or "Play With" for any of my music nothing happens. I went into control panel and selected "turn windows features On or Off" and switched of media player, rebooted and then switched it back on again, rebooted again and it still won't work. I have a lot of other problems with my laptop too such as slow running, constant crashing and freezing, not starting up properly. I've done countless virus checks and not come up with anything. Most of these problems I've had since I bought the laptop but the media player has only just happened.
I use Windows Player (version 12.0.7601.17514), extensively on my Chillblast PC (Windows 7, Intel i7 860 CPU, 4G RAM, Via High Definition Audio version 6.0.1.7300 (latest)), and every .mp3 file played (i.e- has a break in playback) for ½ a second or so exactly 20 seconds from the end of the track. However when I play the same tracks on another media player (e.g.- RealPlayer), the whole track plays perfectly
