I have a new Hp Elitebook 8540p which has had a clean SSD. I am going to install windows 7 Professional and had a few questions about partitions and drivers etc.The first is whether I should partition the SSD for the Win 7 install and then use a second partition for data. Is there any benefit with this on an SSD?I reckon that Win 7 will probably get itself sorted with all the drivers that it needs and HP Update will clear up the ones that it doesnt.
I was wondering after read the stickie if anyone here has had success using a windows 7 professional upgrade and a fresh hard drive?I don't want to mess around with the registry if i can help it but dont want to have to install xp just to install windows 7 at the same time i dont want to throw money away on the upgrade even though its cheap if i cant use it without faffing trying to find my xp stuff, also i want 64bit and for what i have found i cant put that onto my xp
I currently have vista 32 and ordered a full version of windows 7 professional sp1 64-bit. The disk that came in the mail says "Reinstallation dvd windows 7 professional sp1 64 bit". Will this Reinstallation DVD allow me to do a clean install of windows 7 64-bit on my computer?
I have just received an alienware m17x, and for my school network we need windows 7 pro installed. I used my action pack dvd and tried upgrading. It failed. I then wiped my main drive my booting into the dvd, and fresh re installing windows. I've done this multiple times, and everytime it comes up saying it needs to restart, then upon restart says 'completing installation' -
but then it comes up saying 'windows setup could not configure windows to run on this computer's hardware' then restarts and says 'windows could not complete the installation. To install windows on this computer, restart the installation' - then restarts, shows me a boot option of four windows 7's and a windows setup rewind or mething, then shows the windows could not complete message again.
I'm working on a re-install of all components following a complete corruption of the boot sector on my drive which could not be fixed with repairs. The last time I installed everything fresh, I had no issues. Between then and now, there have been no hardware changes on my system, but now I am having issues installing the IDT Codecs. I keep getting an error along the following lines: Quote: ExitError: Error=Device Object not present, restart the system and run setup again. Running under compatibility mode, and running drivers from both the motherboard CD and the manufacturer website both have the same effect. The CD, when booted, says "This OS not support!" and only contains 32-bit vista codecs. ECS' website download indicates the IDT drivers as being compatible with Windows 7. Both do not work. It is almost as if the hardware "disappeared," despite the fact that I was using the drivers quite successfully till just 2 days ago, when the boot sector went kaput.
Windows has installed its own default set, which do nothing to power the 8mm jacks which I use with my speakers, but instead put sound through the HDMI, which is useless because I use a dedicated graphics card. I have tried uninstalling this codec and re-installing IDT, to no effect. Windows replaces with its own default codec.I have referenced this thread here, but offered solutions do not seem to work for me: Intel IDT Audio Driver will not install
Does anyone know whether there is a difference in performance between doing a clean install of Windows 7 vs upgrading Vista? Any better stability? I'm just wondering whether it's worth the trouble of the clean install.
My toshiba c650 laptop recently acquired a virus and now it will not boot. I was running windows 7 home premium 64bit at the time with ubuntu 11.10( I think) my computer crashed while I was running a mcafee scan and has not booted since ubuntu also does not boot due to the windows 7 system failure. Any way I was wondering if I bought a windows professional 64bit upgrade, could I Install it from boot? I also need to know if it would wipe all virus's from the hard drive. It would be best to mention that I have tried safe mode, safe mode with networking, my recovery discs and a blue screen repair discs all that happens when running these is a black screen with white cursor I left them all for an hour to see if anything happens but sadly nothing does.
I have a problem with my custom build pc,When i try installing windows 7 pro 64 bit, It freeze in "windows is loading files", I've waited 20mins and nothing happens.Before this problem happen I bought a Barebone kit and not a problem like this happen but I recently had hardware issues with my motherboard and psu were not stable, I had to replace both my mobo and psu.here's my original build I started with - no problem what's so ever[CODE]
I have seen a lot on clean installs but all guides are from like 2009. Is clean install still a way to install windows 7 with upgrade disc on a new hdd? since i have a hdd with vista on it and i have the licence how do i install 7 with the licence and a black hdd?
I am trying to do a clean install of Win 7 Pro on a new Dell XPS. My laptop came with a 32gb mSATA drive and I want to keep the Intel Smart Reponse activated. Whenever I try to do a clean install with the SATA operation set to "Intel Smart Reponse" in the BIOS, it does not find any disks to install the software too. When I try to load a driver for the drivers, it says no signed drivers were found. I was able to install the Win 7 Pro with the sata operation set to AHCI, but that won't let me enable smart response.
I'm an IT student who got a free Win 7 x64 disk from my school, and I am unable to do a clean install. My system specs are as follows:
Intel Core 2 Duo 3.12 Ghz nVidia GeForce 9800 GTX 512 MB PCI-e 320 GB Western Digital HD SATA 1 Gb DDR2 1066 MHz and 2x2Gb DDR2 1066 MHz SDRAM
I set my boot sequence to boot from DVD-ROM drive first, and HD second. It goes to the "Windows is loading files" screen and gets hung up. I started the process and went to watch TV for an hour, and it is still on the "Windows is loading files" screen. I haven't gotten any error messages. I've unplugged all USB devices from my computer as I have seen on this forum that it has worked for some people.
edited to add: I originally had only 2 Gb of RAM, and it got hung up at the "Windows is loading files" screen. I thought it was getting hung up because I didn't have enough RAM, so I bought brand new 2 sticks of 2 Gb RAM. I took out one of the 1 Gb sticks and placed both of the 2 Gb of RAM...for a total of 5 Gigs. And, it is still doing the same thing.
Ordered a Dell Vostro configured specifically to run XP mode, along with Office 2010. Have received machine, recognize Office isn't installed for XP. Have reviewed several threads addressing issue. My question: I didn't want to purchase Office to run on Windows 7. Our server runs on XP, so that would be useless to me. Can't I obtain a license for what I purchased?
Am buying a new computer with Windows 7 professional installed. Have MS Office Professional 07 on old computer which died. Will MS give me another product key so I can install MS Office Professional 07 on new computer? Will I need install additional drivers?
i've had enough of 7, I use my PC for music and after months of installing/uninstalling/re installing/researching/driver checking etc. i've decided i'm just not going to get things working with 7.
I have my XP disc and i'm ready to do a clean install, but i'm struggling to get it going... what do I do!? Inserting the XP disc brings up the autopay but the option to install is greyed out, which I understand as it's a step down. However, when I press f12 on booting to try to boot my pc from disc it just locks on the boot menu. What can I do to get a clean install of XP going?
I have been having numerous problems over the past wk. The firewall won't stay on, can't do windows updates etc. I have run Vipre as my anti virus and also mbam and superantispyware and everything is coming back clean. Today I decided to just backup my documents etc and then do a clean install. Now the problem is that the DVD burner doesn't show up in the BIOS. It shows up in my computer and it's running fine. If I format it out of the computer can I get windows to install from that DVD drive?
I didn't notice until I tried 2 burns. Then I resorted to downloading elsewhere and after 3 more downloads I got the right file(verified by hash) for 64 bit Windows Pro English. Burned the iso to my thumb drive fine, seemed to install fine and fast on this system: [code] Have 2 500GB spinpoint F3s in raid 0 and 1(setup in bios correctly and in raid menu bios fine)190GB raid 0, 375GB raid 1 using Intel raid after mostly done with install it said it had to restart so it did, but since I used a USB thumb drive it tried booting from that again instead of finishing install. I redid the install after fixing partitions and it seemed to go fine this time I removed the drive when it restarted. I was actually finally in windows 7!After installing a couple drivers I needed I restarted then things went bad.Could no longer enter windows normally because once it loaded the screen went blank.It automatically installed gfx drivers but the monitor drivers aren't installed and I was incapable of installing them after 1-2 hours trying to figure out a way. Monitor didn't show up in device manager.Monitor is an Acer2051w.I could get into safemode and try to mess with stuff.I was able to uninstall video drivers then boot into windows normally but it would automatically install the same driver and I wouldn't be able to get back in again. Automatic driver installation was off by the way.
So I couldn't fix this so I decided to reinstall Windows 7. The install went through fine, said it had to restart to finish up and after restarting the screen would stay blank forever. Doesn't seem to be installing properly now.So I can't get it installed again, and when it was it wasn't working properly. I have the monitor drivers even but no way of installing them so Windows is screwing up setting a bad resolution/ settings for the display that I can't fix hence the blank screen issue.
I have a retail Upgrade DVD for Windows 7 Home Premium which I purchased. I did a clean install by wiping my hard drive using the format partition option on the Windows 7 DVD. I had Vista installed on the HDD before the upgrade so the installation program could "SEE" that I had a qualifying version of Windows to validate the upgrade key.Activation was successful.Now, I want to start a clean slate. However, I don't have Vista installed anymore, just Windows 7.Can I reinstall with an upgrade key on a blank, reformatted hard drive? Will activation pass?Or do I need to reformat with the installation program on the DVD?Finally, I made an image of my Vista operating system before I upgraded, do I need to restore the image so my Win 7 DVD can once again "SEE" the qualifying Windows version?There are forums out there that say different things, yes you can, no you can't, well it depends.
I have a new, 120gb solid state drive I want to install windows 7 pro, 64-bit on. Does windows 7 take care of whatever formatting is needed automatically? Does it let me pick allocation size and type of formatting (e.g. NTSF versus another type)?
I recently had my system crash after a bad update for my graphics card and I've tried to re-install windows a number of times and have had no luck.I have tried a few of the tutorials here and formatted my HDD to try for a new clean install. I get through the first part of the install, but once my PC reboots it keeps trying to load from the disk and then I get into windows boot manager. I try to select the start windows normally option and then I get an error message saying 'Windows failed to load because the system registry file is missing or corrupt'.I have the original windows X64 product disk.
I am about to migrate over to Windows 7 Pro this week, just waiting for a new video card. I have XP Pro (Sp3) now. I will be using a Win 7 Pro upgrade disk. I want to start with a fresh formatted HD, I will being using a second hd (D) with XP PRO installed, will I be able to use C, or must it be installed on the same HD partition(D)? I seem to recall something about having to be on the same partition.
I am preparing to do a clean install on my HP laptop, as the HP Windows 7 (that came from the factory) is bloated and messed up...So, I have backed up everything and am ready to insert the retail disk and install Windows 7. I am going to use the COA key on the bottom of the laptop. Using this key, during the installation menu, will it work fine and accept it? Will I have to call Microsoft
I just did a clean install of Win 7. I have the intel network driver so I'm online but that's it. I have no drivers or programmes at all. What to do next.Yes I forgot to do a backup. It did create an oldwindows folder.I have genuinely activated my Win HP.I have a HP Dv7t 64-bit.
i have tried to install windows 7 on a brand new HD and it comes up with:"windows setup could not configure windows to run on this computers hardware" i have tried 3 times and still get the same error message. i have put the HD into another machine and installed windows 7 successfully so it can't be the new HD- the recovery disks appear to have no surface damage.i have previously installed windows 7 on new HD's on this machine before using the same recovery disks with success-what has gone wrong this time? is my computer damaged somehow? before i put in the new HD my computer was infected with a virus but this could only damage the old HD?
If I do a clean install of windows with preformace in mind what secuirty would you include? Just windows firewall with microsoft essentials? Would that be enough? Its a labtop on wifi (home) but I may be taking it other places at some point. I feel like avast is a great anti virus but I dunno if its possible to just run it once in awhile? Its always loaded. It seems bog system down. im also having other issues from random restarts and such freeze. Anyway what would be enough? Just make sure I don't run into the same problems (of like conflicting programs) messing up windows. Malware (installed) Microsoft essentials running all time and windows firewall is this enough? Or would it be better to just install one all in one program like.
