Windows 7 Home Premium Does Not Reach Login Screen
Dec 20, 2010
I have had Windows 7 Home Premium (64 bit) installed on my Gateway NV53 laptop. I must note that my laptop dual boots Windows and Ubuntu 10.04 with GRUB 2 as my default bootloader (which employs a chainloader to boot Windows 7). 4 weeks ago, I began experiencing problems with my Windows partition. Everytime I booted up, the bootloader would show the Windows 7 logo, and then the computer would restart without ever reaching the login screen. At first, I thought the issue was with the Windows 7 bootloader. So, I used the Windows 7 Repair Disk (for 64 bit machines) and from the command line, rebuilt the BCD from scratch. I even made Windows 7 the default bootloader (instead of GRUB, because I suspected maybe GRUB was being buggy), and still I experienced the same problems. I concluded that the problem could not be the bootloader seeing that I rebuilt a new one from scratch and the problem persisted. I then proceeded to remove the most recent hotfix (I had read somewhere that lately users have been experiencing issues with hotfixes offered by Microsoft) using the Windows 7 Emergency Recovery Disk (ERD), and that did not fix the problem either. I also scanned my partition for viruses and none were found.
i have a Dell Vostro 1520 and im running Windows 7 with a 32bit. It is only 2 years only. It started about a month ago. I was on my laptop viewing and deleting some unwanted photos i had. A few minutes later i realized that i deleted a photo that i wanted. So i went to the recycling bin and restored that photo. When i went back to my photos and went into the album, it said something like i do no have permission to access this folder. Please press continue to get full permission. I clicked continue and i got the access i should have. Now i tried many more random folders and the same thing happened. Also when i came out of the folders, the folders had a big pad lock sign on the front of it. After that i shut down the laptop and went to turn it back on. The laptop will power on like normal. I can press f12 for the boot options. which i have already tried many times. I also tried it in safe mode and what-not, but still nothing. I can hear the fan and stuff spinning up like normal. I have also put and CD into the CD ROM and that spins up fine. So after the Dell logo on the screen, it goes black and stays that way with the cursor. You can move the cursor around no problem. I should also add that the battery light is and has been flashing for a good wile. Its flashing orange and blue. I'm wondering if this has anything to do with the battery. Because my laptop will not charge with the AC adapter in it for many months now. It will only stay powered on with the AC adapter plugged in. One more thing. The LED lights over the buttons. None of the are flashing, besides one, on the far left. And i cant find out anywhere what this LED light stands for.
After I type in my password it shows "Welcome" and the little circle icon... It freezes for a slight second then it shows my desktop. Is this a known glitch
I tried to log on to my user yesterday, and when I type in my password, it goes into the normal loading screen that says "Welcome" and the loading circle next to it is spinning like it should. Except it stay like that. For hours. I've shut down my computer and tried to log in again multiple times. It keeps doing it. I have no hardware plugged in besides monitor, keyboard, and mouse.
I go to controlpanel and go to screensaver and I am not allowed to change or add a screensaver. I get the correct screen but it is greyed out and clicking on anything does nothing.
I have a saumsung lap and it came with windows home premium I shut down the computer like I always do but now it does not show anything from windows exept the internet show ?
I have only had my Asus CM 1730-03 desktop for 4 days and it works fine except one very important thing. Four out of 5 times when I turn it on, it shows the Asus logo and the Windows 7 logo and plays the Windows 7 music, then I see a black screen with an active cursor that I can move with the mouse. No key commands work, like CTRL-ALT-DELETE. All I can do is hold the power button in until it turns off, then turn it on again. Even when it does boot successfully and I use it for a while, when it goes into rest mode, I get the same black screen and active cursor and have to power down again.
The only installations I have done are Kapersky anti-virus and an internal Linksys Wireless-G adapter from my old computer. At first I did not install the software for the wireless adapter, but I took it out of the PC today, installed the software successfully, and re-installed the adapter (per the instructions) and the computer is still behaving the exact same way.
I have tried searching online for solutions but to no avail. My laptop is just under 12 months old and other than the battery dying already I have never really had any problems until last week. Its a Dell Inspiron 1564, Intel I3 running windows 7 home premium.After my computer has been woken from sleep mode any window I open in full size no longer sits flush with the top of the monitor (its about a cm below top of screen), but my desktop background is still normal and reaching the top of the monitor and I can put my cursor up there. I have updated my video and BIOS drivers from the Dell website yesterday but that doesnt seem to have done anything. If I restart my computer it goes back to normal again until the next time it sleeps but I would really rather not have to turn my computer on and off 15 times a day?
A member of my family has windows 7 home premium, and would like to get a touch screen monitor for their pc, so their son can use the pc by touching the screen, as he does at his school. They have seen one, and I was wondering if they can just buy the monitor and plug it in, or do they need to buy anything extra? Is it easy to configure the desktop to use touchscreen?
while installing 7 H.P. it gets to completing installation then freezes up after computer reboots a warning message appears stating windows 7 has failed to install and resume after reboot, and then the same warning message appears.
I tried the roll back installation option and a message flashes on and off to quickly to read. and Vista will not come up to start over.
I'm having some trouble with my home built computer, with Windows 7 home premium OS. When my computer reaches the the windows 7 logo screen, after a couple seconds a blue screen flashes for about half a second and then my computer resets constantly. I have had issues with starting up the computer in the past but now it's really bad. I tryed to do a system restore but an error comes up with the numbers 0x80070057 on it. I would give you the blue screen number buts it's litterally impossible to see.I have tryed unplugging all usb devices.Unplugging cd drive, extra hard drivesTaking out extra ram (from 8gb to 4gb)I havn't had any problems with my self built computer for about a year until now. It works great, just has trouble starting. I have tryed many basic soultions to try to fix it and nothing worked! I am completely clueless
I successfully bought the upgrade version of Windows 7 Home Premium N, downloaded and extracted it and now I want to install it.
When I choose UPDATE in the intallation dialog it tells me that I cannot upgrade from Vista Home Premium to Windows 7 Home Premium ???
Every website from Windows and other people tells me that it IS possible and even the Windows 7 Update Advisor told me that I should not encounter any problems upgrading.
Has anyone of you yet encountered upgrading problems of compatible Vista/7 versions?
Or any other idea what I can do to solve the problem?!
I know that I can make a clean intall of 7, but this would be a pain..
Yesterday I was messing around on my brand-new laptop, and I was stupid enough to try a keygen to get Ultimate (I had HP). Surprising. It worked but the copy wasn't genuine obviously. So then I rebooted, pressed F8 at boot. An ran Toshibas recovery to try to get the computer to its out of box state. I got stuck at initializomg (either that or I was impaptient) so I turned off the laptop. Then when I truer to boot I got bootmgr is missing. I have an old vista Hp disk so I installed that for the time being. So my question is, how do I get it back to the original state? I do t have any important data or anything.
Recently ive decided that Well i should upgrade this computer. give it a bit of ..well style.But since ive upgraded to Windows 7 there has been no sound whatsoever. Ive downloaded countless driver programs which tell you what sound card you have and not one has detected it. IVE ALSO downloaded drivers for the Windows 7 version of my sound (Realtek AC97) and ran windows updates and NONE worked. ive ran the troubleshooter on the sound thing...STILL not detecting any sound card. i tried changing the audio in BIOS from auto - enabled....nothing.
I bought a notebook preinstalled Windows 7 Home Premium 64 bit, of course, licensed.But I found it incompatible with some software. So I decided to use 32 bit.I want to format the whole drive and install 32 bit version of W7HP.
The original OS was Windows XP 32bit SP3. I upgraded this system to Windows Vista Home Premium 32bit SP2 with no issues.
I then went to upgrade the system to Windows 7 Premium. I chose the "Upgrade" install and not the "Clean" install. I've checked the updater to confirm that all my system information was adequate. I uninstalled the ATI Catalyst Controller, iTunes, etc. that it wanted me to. Oddly enough, the ATI Catalyst Controller was the most recent driver that supports Windows 7.
I checked online to see if the hardware was all supported by Windows 7. The Sapphire Vapor-X video card was not compatible or compatible... it simply wasn't on the list of either. The X-Fi Extreme Gamer said it was NOT compatible... yet, I had a driver for Windows 7 and the Windows 7 Application checker said that my sound card was ready for Windows 7... thus a discrepency.
I went on with the installation. I get to the last step where it resets the computer at 62% and I get a BSOD for about 1/3 of a second. It goes by too quickly for me to capture it. It then restarts the computer instantly with the result of "Upgrade was not completed successfully. Restoring prior OS yadda yadda". I've gone through this about 5 times now trying different things.. keeping the Catalyst controller installed, uninstalling the video card, removing the sound card, etc. Nothing seems to work.
It was recommended to me that I do a clean install... however, I have read that many others have done a clean install and theirs STILL doesn't get past the 62%.
Is it my hardware? Do I need to buy MORE hardware now that 7 is out that is on the compatible list?
I'm french and i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.Anyone know if it it possible to enter a Premium key with a Premium N DVD ?
i already owns Seven Home Premium N (Full french DVD version with a key).I recently bought Seven Home Premium on Amazon UK (Full non N version, the E uropeen version). This version is entirely in English.As you can see, my english is not so good to have a full non-french system. I would like to use my own french Home Premium N to install my Premium english key.
I'm using Windows 7 Pro. I have remove the login pw in my user account now I do not need to do the login and able to use the computer right away. But I found I am using the computer as a user not administrator. How can I skip the login screen and go straight into desktop as administrator.
I have an RDP Server on a windows 7 ultimate 32 bit and i would like to be able to use another system login screen to connect to this server. As in when i turn of display last local users, so that if i was to enter XXX into the username and XXX into the password and it will connect Although i wouldnt mind being able to set up roaming profiles between these systems either.
I have sort of a special case here. I purchased my HP laptop in Thailand, and much to my chagrin it came installed with Windows 7 Home Basic. In addition, the HP store which sold me the laptop installed 4gb of RAM neglecting to tell me that the 32bit version of 7 only supported up to 3. At any rate, I am hoping to upgrade to Windows 7 Home Premium, 64 Bit edition.But while there is a glut of information online about how to upgrade from Starter, there is little to nothing about Home Basic. Do I have to buy a full copy of 7 Home Premium 64 Bit? Can I buy an Anytime Upgrade that is meant for Starter and apply it to my computer?
Had Windows 7 home premium for around 2 months on a brand new desktop. Never had a single problem with it untill today. Turned it on as normal, got to the log in screen where i click on the required user. As the pc is only used by me I only have 1 user availiable. I click on it like normal but this time i get a message saying 'The user profile service service failed the logon' 'user profile cannot be loaded'. It then refreshes the page and returns me back to the logon page and if i press enter the same thing just keeps repeating itself. Other option on this page are the shutdown/sleep/restart option and a little box in the bottom left corner called ease of access with various options, but none that seem relevant to the situation.
I came to my laptop about five hours ago and have not been able to do anything with it since. I had it in hibernate and as I flicked the lid up it shut itself down - I assumed for updates. Nothing happened.I turned it on, started windows normally as it hadn't shut down properly and waited for the log on screen. It hung on "Please wait" for about five minutes with the circle going round and round and round, then nothing, just the home page no user no password no log on. I turned it off and turned it on again while Google'ing for answers. Seeing as I haven't been able to log in at all a lot of the answers I haven't been able to try, so far I have tried: to boot normally and end up with the hanging screen.booting safe mode, it loads files, finishes with windowssystem32DRIVERSCLASSPNP.SYS then restarts and I'm back to square one.booting in safe mode with networking and command prompt - same as above. F8, repair, system restore, tried all points with errors:System restore failed to extract the file (C:) from the restore point. An unspecified error occurred during system restore (0x8000ffff) [code]I downloaded Windows 7 about 18 months ago from a student offer while I was at university - I was sent a CD/DVD and put it somewhere very safe, so safe I don't even know where it is!If it is any help, I also hear a ticking noise from the laptop when it gets to the start up screen just as it begins to hang, it then stops and I end up having to turn it off or it restarts itself.
hey i have windows 7 home premium 32-bit, i also have 4GB RAM but only (2.93 GB usable). i have intel chipset 4 graphics .... what i would like to know is why my computer is not using all my RAM an can i use 1GB of my RAM as Video ram for games?
I recently uprgaded my Vista x64 PC to Windows 7 x64 Home Premium. I now want to upgrade to the professional version. I have all legal copies of both. When I upgrade to the pro version, can I then use the Win 7 Home Premium upgrade (with that FPP) on another device (laptop), since the pro upgrade will have it's own FPP?
Does Windows 7 Home Premium only support 64 bit? corychuga123 has chosen the best answer to his/her question.Click here to view the answer that was selected.
My Computer properties tell me that I have 16gb installed, but it says that only 7.96gb is useable. How do I get it to use the rest? I am running Windows 7 Home Premium x64, so I should be able to max it out at 16gb.
