I need to have win2k on my computer (hp dv7 win7 GR) which is the best way to go meaning stable system and proper operation. I have tried a virtual pc but it made a mesh wile I was trying to install my ethernet plotter, scanner, printer, and some programs that require a usb key to work.
View 2 RepliesI'd like to run Windows 7 and Windows 2000 in a dual boot system.how to set this up; install sequence etc?
View 2 Replies View RelatedWhat is the difference between virtual memory vs installed Ram? I have win7 pro , Gateway 5800 @ 3.20 GHZ , dual-core x64 system with GB ram installed. My sys specs says that I have 9GB of virtual memory available.My system seemed slow , so I checked the Memory alloted for my paging file and it said 512k! It recommended MB? So I set the Minimum at MB and the max at MB. It did not seem to make a major difference though. Should I reset it to below the 6GB total Ram or is that a separate issue? I use the computer mostly for video & web commenting but will be doing more offline gaming soon.
View 11 Replies View RelatedI am building a new computer and I want to go with a dual screen setup. I was wondering if I should go with a GTX 670 2GB GPU or two Sapphire Radeon 7870s. If not specifically these cards, let me know what you think. Is it better to have a single GPU with dual DVI output or two slightly cheaper GPUs using crossfire?
View 5 Replies View RelatedHow to Boot from a CD or DVD in a Windows Virtual PC ?
View 0 Replies View RelatedI'm looking for a new 17" laptop and find some with dual core and others with the hyperthread. Which is considered the best.
View 5 Replies View RelatedI tried to boot in safe mode, it got stuck in mid boot. I tried to boot it with system repair, it said it was loading files and then it got stuck on a screen that said copyright Microsoft Corporation and had a green loading bar. My husband's laptop is exactly the same as mine, so I used it to create a system repair cd. I set the laptop up to boot from cd and tried it, but I got the same thing with it sticking on the green loading bar. I ran a diagnostics on my computer and everything passed except a hard drive test in which I got the error 2000-0146. I checked that error on the dell support website and it told me to take the hard drive out and plug it back in. I have not done this yet as the instructions to do so required me to disassemble the whole computer just to get at the hard drive. After some online research, I created a Knoppix (Linux based os) 6.7 boot cd and booted from the cd drive. This worked beautifully and I am now in the process of transferring all my important data from the hard drive to an external hard drive.
So here are my questions. Everything I read about error 2000-0146 says it's a hard drive failure but if that were the case, why does the hard drive seem to work fine when accessed from a Linux OS? Also, how would disconnecting and reconnecting the hard drive fix the problem? I really don't want to take it apart if I don't have too. Could the windows boot files somehow be corrupted causing it not to boot, and if so could I access them with Knoppix and replace them with good files
dual booting windows 7 home premium x64 with linux fedora 14 on dual independantly dedicated drives. i am a college student with moderate computer (windows) knowledge but am doing software development and would like to play around with some linux for a class. i have no prior experience with linux and have minimal knowledge of operation. i am currently running windows 7 and would like to keep it as my primary os. i do not wish to share media files across drives or os's, windows does that just fine as is and i dont want to get into a third drive. my current drive is a 1tb wd black caviar hdd. it is also currently 2/3rds full and the desktop is about 6 months old so i would rather not partition the drive for a dual boot. i would think that there are some other advantages for the os's operating independantly off their own drives other than if one hdd dies i should still have the other with its os still ok. i have read some topics about RAID configs with dual boot setups with dual drives like this but am not very familiar with RAID. is there a RAID config that would be beneficial in this situation? i currently do not have a RAID card. my tower internals are not very accessible and i dont like the idea of disconnecting drives depending on which os i want to operate.
View 5 Replies View Relatedi have a new work laptop with xp sp3 on it. I want to install w7 64 bit as a dual boot, but only have 1 physical drive. i cannot remove my current installation as it is pre-build from work, but can partition the drive etc. However on trying to install w7 64 bit I get a message saying cannot install windows 7 on efi drive with mbr, not gpt. Can I do what I want without screwing up my xp installation?
View 5 Replies View RelatedI just installed a 2nd video card. It's running perfectly fine, except now on my dual monitor setup, there is a virtual space between my monitors. (This space shows on the Windows "screen resolution" tab. Practically, it means that I have to move my mouse a lot more to get it onto the 2nd screen, rather than it just being right there. I can move the screen (on the screen resoltion tab) to be right next to the other screen. I'll press save/apply and then it just pops back to the same place it was with the gap still there. I've tried doing it in the nVidia control panel as well, with the same problem (pops back). By the way, even though I installed the 2nd card, both monitors are plugged into the SAME, OLD (previously working) video card.
View 10 Replies View RelatedI installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have dual boot with Xp and windows 7.when i log into my Xp all the restore points being deleted from windows 7.when i check the disk management information in 7 it shows windows 7 create a logical drive with my Xp primary drive.even i am hide the drive from both windows means Xp drive from windows 7 and vice verse.So i like to unmount or remove the drive partition of windows 7 from Xp and Xp primary from windows 7.So that they dont affect each others system files with being deleted the partitions.
View 1 Replies View RelatedI noticed when I went about doing a fresh install of Windows 7 on the HDD that shipped with my laptop, and using the partitioning and formatting options included in the installation routine, that when I'd do a format, the formatting would complete very rapidly. From this, I deduce that the installation routine does not perform a low-level format.Perhaps, from this I should conclude that a low-level format is completely unnecessary. Yet, I seem to remember reading somewhere online, at some point in time (note: this might have been back in the Win'95 days) that it's better to do a low-level format; to flip all the bits to zero.
View 8 Replies View RelatedI installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
View 2 Replies View RelatedI can't get Win 7 to boot after setting up dual boot (Ubuntu 10.10) on my GF's laptop. I'll describe the problem and everything that has been tried so far. REALLY hoping somebody has an idea, I'm getting desperate.I installed Ubuntu last night via the Live CD. Used the Live version to install alongside Windows and partition the drive, install Grub, etc. At reboot, after POST it would just go to a black screen with a flashing cursor. I could only run off the live CD. A forum member determined the Grub was trying to load from the wrong partition. We changed that and voila! Grub now loads properly. I can boot into Ubunto via Grub with zero problems. HOWEVER: when I try to boot into Win 7 from Grub, it just locks at the same flashing cursor of death screen. The 7 partition is till intact, I can see and access all the files on the 7 partition from within Ubuntu, however 7 will not boot. I have tried downloading and burning the Win 7 repair disk and doing all of the following,Running the automatic Start Up Repair - several times. All it does is remove Grub, but booting still goes to the flashing cursor and I have to reinstall Grub again to be able to do anything after POST.I have used the command prompt to run "bootsect /nt60 SYS /mbr". Has the same effect as above.I have used all the bootsec.exe /fixmbr, /fixboot, and /rebuildBCD commands. Again, all have the same effect and I have to reinstall Grub to get anywhere.I don't have an installation disk to try and just do a repair install because Asus apparently doesn't feel that I would need one of these. All I have is the recovery disks from the Asus AIRecovery application that want to just re-format the entire drive and start over. This isn't an option. It's my GF's laptop (mine gave up the ghost last week) and we both have WAY too much highly important data on here. Not to mention she would castrate me . Now from all my research the only other thing I've come across that sounds possible is that the boot flag needs to be set to a different partition. Somebody had a somewhat similar problem and it turned out the way Dell set up the system the boot flag had to be moved to a recovery partition and it worked fine. I'm wondering if Asus has something similar going on, but I can't figure out how to move the boot flag. I'm going on 12 straight hours of working on this now
View 9 Replies View RelatedHow to Change the OS Name in Windows Boot Manager ?
View 0 Replies View RelatedI upgraded to Windows 7, but I have a few software I installed on Virtual PC 2007 before. I use XP mode but can't find a way to use the virtual HD created with Virtual PC 2007. Is there a way to convert the virtual HD so that XP mode can recognize?
View 1 Replies View RelatedHow to Change Virtual Machine Settings in Windows Virtual PC ?
View 0 Replies View RelatedI have installed a year before UBUNTU on my pc with dual boot (i.e. use either window 7 or ubuntu).the NTFS partition that contains the UBUNTU was corrupted and i wanted to take the dual boot from my PC. I used the instructions from the web site: http://www.makeuseof.com/tag/how-to-...t-environment/but the disk management tool would not let me delete the NTFS partition.Could any one help me delete the NTFS partition and use just windows 7 as the only boot. step by step help would be great.
View 8 Replies View RelatedI got windows 7 running fine for a while now and ever since my XP did not boot anymore.I was not worried to much about it since i did not need it at the time.But now i really REALY need it,See i got all my Cubase projects in there and my cubase plug-ins al setup in XP and i need to get to the projects?At first it did not do anything and using easyBCD did not help either.I cpoied ntldr and detect to the root of C: wich contains my XP and now it shows the bootscreen but hangs on a black screen.The thing is right before the bootscreen shows i see the text" invalid boot.ini" flashing by very quick.I am able to enter that winXP install in safe mode and i tried safe/vga mode as well wich works but thats all.
View 9 Replies View RelatedI have a laptop I bought a year ago on which a created a dual boot Win 7 (32bit)/Win XP SP3 install, each on a separate partition. It was my first Win 7/XP dual boot install, and my first personal system that I allowed to have a Win 7 install on it at all, so although I have plenty of experience working on pretty much every previous version of Windows, I have very little experience with Win 7 and dual boot configs.
Today about 2 hours ago my audio spontaneously stopped worked for no good reason, so after shutting down each program to see if that cured it (which it didn't), I restarted the system. Out of the blue, for the first time I've ever experienced it, I received the msg "MBR Error 1" - Press any key to boot from floppy. I don't have a floppy of course on my laptop, and if I press any key I simply get the same msg. I turned the system off for a few minutes to make sure it was a good cold boot, but every time I still get the same msg. I tried switching the BIOS setting from IDE to AHCI (IDE is required for XP to boot, AHCI required for Win 7), but I still get the same error msg before I'm even prompted with the OS boot selection, so it made no difference of course.
I looked up this issue and found various suggestions, but none of the ones I found took into consideration a dual boot config., they were all Win 7 specific solutions. I don't what to try and repair the MBR only to have it screw up my dual boot config and be unable to access XP, which is what I use almost exclusively, nor do i want to lose access to Win 7 if at all possible.
I had a backup HD of my complete system that I saved several months ago when I upgraded my HD, and I periodically refresh the most important files on it, so I'm currently running on the laptop in question using my old HD, and it's working just fine. Worst case I can just clone my old HD to my newer HD that's screwed up, but I'll still lose a lot of changes I've made to the OS since I upgraded the HD and have to reinstall and config a number of programs, so that's my last option. I'll also have to back up about 200GB of data from the newer HD which is much larger than my old HD, and then restore it back after the clone, something that will take a lot of time and unncessary effort if I can just fix the MBR.
I had Win XP on 1 HDD & installed Win 7 on a different HDD. I think I accidentally did a dual boot install because Win 7 won't boot without the the XP disk connected to the motherboard.
That was fine until my XP drive died yesterday. Now Win 7 won't boot. The first time I tried to repair, Win 7 was not even seen. so I booted into diskpart and made the partition active. Now it could be seen as an OS.
Then I did a startup repair. It did whatever it does & when it was finished I restarted the pc but it didn't boot I went back to diskpart and confirmed the partition was active. I went back startup repair and tried again.
This time it said it could not detect a problem, but it still will not boot. What else can I do? My pc is homebuilt. Right now I have the 1 sata drive, 2.53 ghz cpu, 4gb ram, onboard video & sound
I've had my computer for 8 months, it's a dell inspiron 1545 running windows 7 home premium. I'm suddenly unable to start the computer as it just comes up with a blue windows 7 screen with a cursor and that's it. I've tried starting it in normal mode and and startup repair but the same thing happens with both. I ran the diagnostics test and it came up with error code 2000-0142 which after googling i've found is a hard drive problem.
Will reinstalling windows 7 wipe my hard drive?
How to Delete a Virtual Machine Created with Windows Virtual PC ?
View 0 Replies View RelatedHow to Create a Virtual Machine in Windows Virtual PC ?
View 0 Replies View RelatedIs the dual CORE 2.8ghz good also for the windows 7 system?
View 1 Replies View RelatedAs currently configured, XP is on drive C:, Win 7 was added to drive E:, and the system is currently run as a dual boot. Attempting to boot without the XP drive present will yield a "NTLDR is missing" error very early in the boot process.
I have already tried the following:
(1) I moved the hidden Windows Boot Manager files (bootmgr as well as the associated Boot folder) from the XP drive root to the Win 7 drive root.
(2) After physically removing the XP drive, I rebooted to the Win 7 installation DVD, and used the "Repair Your Computer" option to pull up the "Recovery Tools". Then, using the command prompt utility, ...
(3) I attempted to write a new boot sector to the Windows 7 disk using the command: Bootrec /fixboot, - that yields an error though. The Bootrec /fixmbr claimed success, but ultimately did not make Win 7 drive bootable.
I had to reconnect drive C: just to boot into Win 7 again to write this. I do have files backed up, but to format and reinstall files would take many hours beyond just the time to transfer 400 GB of data, since I have dozens of purchased applications that need to be freshly reinstalled and validated as well. Basically I want my E: drive now to be my boot drive while the C: drive is reformatted and used for general storage.
Any idea how to make my Win 7 drive bootable? Do I need a partition program that is more adept at creating a viable boot sector, or is that even the problem?
I installed Windows 7 32bt profesional on the D: partition on an XP machine (C. Dual boot worked fine, but since I had to reinstall XP I have lost the option to change partitions at boot.I want XP to be the default but with Win 7 to an option at boot.My boot.ini is currently:[CODE]
View 4 Replies View RelatedI wanted to dual boot Mac OS with my Windows 7 but everything I do it comes wrong, simply doesn't work. I tried dual boot with iatkos v1.0i, iatkos s3, iatkos v7 but still nothing.
View 3 Replies View Relatedi have a hard disk 500gb and i made three partitions.the 1st partition i installed windows 7 first.what i did today?i wanted to install windows xp to the 2nd partition.i installed and now that is the biggest problem.i cant in to windows 7 anymore.when i turn on my pc it has only windows xp.it hasnt dual boot to choose what operation system i want to in.so what to do?i want windows 7 and xp with dual boot to choose
View 9 Replies View RelatedI tried to make a dual boot with windows 7 and windows 8, but when I made a partition, the hard disk drive (C changed to dynamic.Can I still upgrade to windows 8?how can I convert it back to basic disk?I have windows 7.
View 2 Replies View Related