Vista Boot Screen
Nov 16, 2008Who noticed the Vista Bootscreen being used somewhere in Windows 7?
You might find it built into a specific function?
Who noticed the Vista Bootscreen being used somewhere in Windows 7?
You might find it built into a specific function?
I find that the Windows 7 boot screen slows down the boot process on my machine. Is there a way to restore the old Vista scrolling loading bar? I know it's there as my netbook uses it.
View 6 Replies View RelatedI am running windows 7 and I booted into safe mode to do a sfc /scannow. I was having another small issue and thought that I would just do that to check if it would fix it. After I rebooted I got a boot menu that said that I have Windows 7 and Vista installed and I should pick which OS I wanted. This was upgraded from Vista. I picked Windows 7 and it couldn't find it. Tried again and picked Vista and it couldn't find it either. That wasn't good. I had a Vista recovery disk from Neosmart and tried that. It booted on that and detected right away that there was an issue and offered to fix it. I let it and when it rebooted, I got the Vista startup screen but it was my Windows 7 that I ended up with. It couldn't be any different because that is all that is on it.
I am assuming that because I used a Vista disk for the repair is why that happed but when I try to now use a Windows 7 recovery disk, it doesn't change back. Not that it is really important, but wondering if I can change it back. Otherwise, I guess as long as it is working, not going to worry about it.
I have installed Windows 7 build 7000 in a couple of PCs , everything fine.
I have installed it on a netbook (LG X110, its the same with MSI WIND U100), and upon boot, the boot screen is the old Vista animated boot screen, with the green bar loader at the bottom. No new Windows 7 boot screen.
I guess it has to do with the screen size of LG X110 (10") which also causes screen detection issues in other OS's (e.g. Backtrack 3), but is there an option where I can FORCE the resolution/screen size so that it will show the correct boot screen?
I just went through a lot of trouble to get Windows XP, Windows 7 and Grub2 (for all my Linux distros) working together. In order to do so, I followed this post on the Ubuntu forums. The part that concerns Windows 7 is Step 2.
I ran all the commands and was able to get all of the OSes working together, but now Windows 7 is using Vista's ugly green scrolling bar as the boot screen.
I've tried Code: bcdedit /set {current} locale en-US and Code: bcdboot %WinDir% /l en-US Neither worked. I'd rather avoid doing a clean install, if possible.
How to change without any 3rd app, the boot screen of win 7 to be like vista? (I like the green progress bar)
View 2 Replies View Relatedafter installing windows 7 in the same partition in which the vista resides,when i restart i have this windows dual boot screen,but i no longer want my vista,how do i go about it?
and why is my Sleep option in the windows start menu greyed out? there is only Restart,Shut Down,Hibernate,Lock,Swith User options.everything except the Sleep. why
how to fix: Boot Screen of Windows 7 that shows Windows Vista instead
I have a Netbook brand "emachines" em350 created by Acer
Model Number: NAV 51
32-bit OS
1.66 Ghz
Running Windows 7 SP1
160 gb of HHD
Intel Atom
10.1 LED LCD
1 gb of RAM
and 6 Cell of Li-ion battery
I have a question about my Lenovo S10 and Windows 7 Ultimate.I have already installed windows 7 in my Lenovo S10.Driver is okay too but only the bootscreen is vista-style.
I have tried to use some 3rd software to change my bootscreen and found nothing..
I had install the Build 7264/7600 RTM and thay were the same.
I had Grub and Kubuntu, then was done with linux for the time being, so i cleared the partition that it was on, and when i restarted grub was giving an error etc, so all i could find was my vista 64 cd, and after some reading on MS support pages, being that they used the same loader to fix it with that dvd.
So i ran this in the cmd prompt:
bcdedit /export c:BCD_Backup
attrib bcd -s -h -r
ren c:ootcd bcd.old
bootrec /fixmbr
bootrec /fixboot
and everything was dandy, it fixed the loader.... but put the vista boot screen(the simplistic screen with the loading bar)
so i go access to my windows 7 iso, burned it, and re did the same process (but used the repair option first cuz it asked me and i figured it would be easier) and then ran the same commands to hopefully refresh the loader w/ the possibly newer windows 7 one(mainly for the boot logo)
but its still showing the old vista logo
i know this seems silly but how can i fix it back to the newer windows 7 one?
I had to return to xp mce till I get my W7 ultimate signature edition in a few days and am wondering what is that program for changing your boot screen ?
I knwo it was a freeware and it was compatible with vista xp and w7 so I am gonna use it on my xp systems and once i return to w7 on my main system ..
Sorry havent made any posts in a while I got burried in school and starting my own lan center / custyom build computer shop so I havent had time to do my normal posting and catching up..
IU am however back I got my collage scedual and work scedual to allow me 2 horus of messing around in between plus time for pro gamming WOOT MLGPRO FTW!!!!!
I want to know whether or not it is possible to change the new windows 7 boot screen (like the flashy logo thing) to the old vista-style running green bar?I've looked on the internet but only found fixes that turns the vista-style running bar back to the flashy logo windows 7 boot screen...
View 2 Replies View RelatedMy system dual boots to either Windows 7 or Vista Ultimate, or, at least it is supposed to. Something happened and now the system just boots to Winodows 7 without giving me the choice to boot to either. When I use F6 I find that only Windows 7 is listed in the Operating Systems box.
View 1 Replies View RelatedNew laptop has Windows 7 Home Premium 64bit. I have two business programs that won't run on a 64bit system. Partitioned the hard drive to install Vista Home Premium 32bit to create a dual boot system solely to run these two programs.Can't get Vista to load. Followed tutorial meticulously. All goes fine until the "Vista will boot for the first time" step. After this first boot, the screen returns to the "completing installation" page. However, the process dies here and the progress bar across the bottom of the screen never moves, even after an hour. Reformatted the partition and started over with same results. Multiple attempts always die after the first boot.
View 9 Replies View RelatedI have two drives (C and D) with Vista on one and Win 7 on the other (not sure if they're actual drives or partitions of a single drive, how do I tell?). I am dual booting and never use Vista. Starting to need the disk space and want to delete Vista. Is this difficult in this scenario?
View 2 Replies View RelatedI had recently installed windows 7 on my laptop running windows vista. I did not remove the existing windows vista installation, and thus win 7 was installed in a dual boot combination. Now, i want to remove vista from my laptop and use windows 7 only.The problem is that during installation, win 7 was installed on logical drive and windows vista was on the primary drive. Thus, i cannot delete/format the windows vista partition. Also I cannot transfer the boot drive to the partition containing win 7 because the vista partition is the active one.
View 6 Replies View RelatedI have dualboot XP SP3 and Vista Ultimate on my system,,and now i want to install Windows 7 over the XP OS. I wish to keep Vista with Windows 7 without reinstalling Vista.
Can I just install Windows 7 over XP , or should i be careful for MBR,or boot....
I installed Windows 7 on a partitioned harddrive with vista on the other half. After the installation i have my boot menu with:Windows 7, Windows Vista, Windows vista still works but when i try and load windows 7 i get a boot error message
View 9 Replies View RelatedI have recently upgraded my win vista 32 bit to windows 7 32 bit home premium. If my comp crashes do i need a vista bootable cd or can i repair it from windows 7 cd which i purchased
View 1 Replies View RelatedI had a dual boot system with XP Pro and Vista Ultimate 32bit everything was great.
I decided to try the Windows 7 RC but I needed a new drive due to lack of space.
My original drive is IDE, I bought a SATA drive and moved the OS's to the new drive.
I wanted to keep the old drive in system for storage so I formatted it and changed BIOS boot priority.
After fixing some minor issues with drive letter assignments due to the fact the bios reads the first and second IDE channels first then SATA.
I was all ready to install Windows 7 RC on an unallocated 100gb section of my new drive.
Note: that the old drive has a single partition formatted NTFS but is currently blank.
And I did follow the "Golden Rule" of installing the oldest OS first when I set up the computer in the first place.
The Install went fine.
Now for the problem.
Windows 7 did not add an entry into Vista's boot manager so no option to boot into Windows 7 without the install disk in the drive.
I used EasyBCD 1.7.2 from within Vista to add an entry for Windows 7. But when initially added easyBCD assigns the drive partition a drive letter that I don't have.
Therefore the entry does not show up on reboot. I changed the path to the correct drive and then the entry does show up on reboot.
But when I select Windows 7 the boot manager refuses to load Windows 7 saying that "cannot verify the digital signature of the file winload.exe"
I have tried wiping and re-installing the Windows 7 partition 3 times I've tried using the Windows 7 install disk to repair startup problems.
None of these has worked I'm at a loss as to what is happening.
If Windows 7 created a hidden partition for recovery and boot files I'm unable to find it, I thought of trying and Linux Live CD to look for the hidden partition but have not done it yet. My thought was to delete this hidden partition and wipe the Windows 7 partition and format it before re-installing either from within Vista or during the Windows 7 install process via a command prompt in an attempt to keep Windows 7 from creating this hidden partition. The problem is that I don't believe this will solve the problem due to the digital signature error reported by Vista's boot manager.
Can anybody help me with this or at least bring a perspective that I may be over-looking?
I seem to be having a right trauma with this lol. I originally had Vista installed. Then i installed 7 to another HDD and that worked fine. I could choose between the OS. Now, i want to get rid of vista and use 7 solely. Easy i thought. Remove the boot entry and format the partition. Thats where it went horrilby wrong
Upon reboot i got the dreaded BOOTMGR missing file do'h
Anyway long story short i manged to system restore and fixmbr to boot back into 7 (phew)
Now can anyone tell me of a way that i can ditch vista without the headache of this.
ive attached a screen shot of how things are layed out.
Plus can anyone recommend a good imaging program that i could use just in-case my tinkering leads to something i cant repair.
I've something going on in my PC with 3 partitions. I have one called C:/ where I have Windows Vista 32-bit (x86) installed, other called S:/ which is empty and the last one is N:/ where I have all my files like images, music, videos, etc... (wisely done so when I need to re-install OS, don't waste time burning all that files on dvd).
Since I got one partition empty (S:/), I decided to give Windows 7 a try. Being a TechNet Plus subscriber, allowed me to get a free copy of Windows 7, which I downloaded and it was saved on C:/ partition.
I know that's stupid and I've been slapping myself because of that but, I went to the downloaded files and hit twice on setup.exe. This means I didn't burned the .iso to a DVD
Seven was sucessfully installed. After playing around with new features and graphics, I installed some Windows Updates and rebooted for the first time (since I installed it).
DAMN, here starts the problem because when booting up, appeared the message on black screen saying "BOOTMGR IS COMPRESSED. HIT CTRL+ALT+DEL TO REBOOT". I totally forgot that my S:/ partition was compressed! And we all know that an OS partition should never be compressed. And then I slapped myself again.
The weird thing is that I couldn't boot in Windows Vista, I hadn't that option. Since I didn't burned Windows 7 to a DVD (*slapping me again*) and I couldn't start in Vista, I had to insert a modified Vista DVD by Toshiba (that came with PC when I bought it), this means that I don't have the repair option, I'm only able to format and re-install OS (and that sucks!), ..., and now it is fixed, that "bootmgr is compressed" message is gone which allowed me to boot to WinVista but where's dual boot??!
First thing I done when I got Vista back was uncompressing S:/ partition. Then I went to msconfig, but there is only one OS in Boot tab - Windows Vista. Once C:/ partition was formatted, and Windows 7 Setup was saved there, I lost those files, I need to download them again. But it is already installed, so there has to be a way to fix this. The problem is that I can't load Windows 7, I don't have that option while booting...
Anyone knows how to fix this?
I have installed 7 on my desktop. When i boot i get that new funky glowing logo. which is nice.
Now, when i install it on my acer one netbook i get the old drab vista bar.
Now would i be right in assuming that its something to do with the graphics card on the machines? If not can anyone point me in the right direction. Its not a problem to me im just curious as to why its done that.
I installed windows 7 but instaed of the 4 colours I get the Vista scroll bar on boot up. I have changed the screen resolution & made some changes using command prompt but no luck so far?
View 1 Replies View Relatedi have done fresh install of win 7 on my D drive
it installed properly but theres no vista in boot menu
i have important links on my firefox in vista
is there anyway to boot vista .
I am dual booting Windows 7 64 and Vista and using EASYBCD in each operating system. I am able to Boot into either program with no problems. However When I start EasyBCD in Vista I get the Vista1 and Vista2 screenshots. The Vista3 is what My msconfig tab in the Vista operating system looks like.
When In Windows 7 operating system and use EasyBCD I get the Windows 7 1 screenshot. My msconfig boot tab in Windows 7 looks like Windows 7 2. Let me add that I'm using a product called RollbackRx (ONLY) on the Win 7 operating system, both systems are on seperate harddrives. What do I have to do to get the boot files to be seen in the Vista msconfig boot tab, and the EasyBCD view settings window?
I installed Seven Beta on a dedicated partition in my laptop so that now my hard disk has the following partitions:
C=VistaOS default OEM Operating System
D=Data for documents, pictures, etc.
E=SevenOS Seven Beta
This is when I read my HD from Vista, but from inside Seven the partitions are like that:
C=SevenOS, D=Data, E=VistaOS
My problem is that I CANNOT boot Seven as there is no dual boot menu showing at all during boot time.
I downloaded BCDEdit and added a menu entry for Seven, but that did not work. Again, no dual boot menu showing at all.
So here's my question: how can I set up a dual boot process using the standard tool of Vista, for BCDEdit didn't work and at this very moment I cannot boot Seven?
For some reason, my clean installation on my HTPC still boots with the old Vista startup screen (the green scrolling bar). I really like the new one that 7 has with the floating colors that come together to form the "windows" logo that works fine on my other machines. I did notice that I would always get the Vista logon when my desktop was dual boot, but now that I've eliminated all Vista installations, I get the 7 startup screen - thus I was surprised to see the old green bar show up on my HTPC, seeing as though the only OS that's on it now is Windows 7 7100 (which works GREAT!).
My HTPC has 3 drives in it, one for Media, one for extra storage (is completely empty now) and one 80GB drive for the OS. (Interestingly enough, the "Media" drive (E:) is listed as the "System" drive, even though I did the installation with all the other drives unplugged.
Is there a way that I can fix this so I get the Windows 7 startup screen?
the vista and win7 both has retail version,n it is 30days trial...for which lots of cracks n activators are available.i just want to know,i am trying dual boot,having win7 on C n vista on D partition,n both are activated by crack...but problem is,as long win7 is only OS,its activated but as long i install vista on D n apply crack,vista gets cracked but win7 on C again reverts to 30day trial.as i felt,this might be cause of installing win7 on C n vista on D,i mean oldest OS must be 1st,i dun know i m saying right or wrong.
View 1 Replies View RelatedI was wondering if it's possible to run windows 7 along with Vista (64bit). My current computer has 4 drives setup in a RAID configuration and i am wanting to add a new drive which I could run Windows 7 on.
View 1 Replies View Relatedbut I only have windows 7 64. Never had Vista on the machine. Just did a clean reinstall of windows 7 from my legal FULL disk. It has activated correctly.If I choose vista it still boots to win 7..
View 1 Replies View Related