Upgrading From XP To Windows 7 Using USB?
Feb 2, 2012
I am trying to upgrade to Windows 7 because there are various programs that I would like to use but I am unable to because I am running on a 32 bit operating system, and quite frankly, the OS is outdated and it is time for an upgrade anyway.But I can't afford to buy the operating system at the moment so I downloaded an ISO file and I am trying to create a bootable USB, but the Windows 7 USB DVD Download Tool won't work, it copies all of the files to the drive but it can't make it bootable because bootsect.exe is not a valid Windows XP application.So the question I'm asking is does anyone know of another way to make the USB drive bootable? I tried a program called WinSetupFromUSB but it stops me before the installation process starts and prompts me to browse for drivers, and I haven't been able to solve this problem yet
View 3 Replies
ADVERTISEMENT
Dec 22, 2012
I have Hitman: Absolution and Microsoft Office 2010, that both need Windows 7. Luckily, I have an official Windows 7 install disc for both 32 and 64. Now, backing up all my qaqa on 4.7 GB dvd discs would be a hassle, and that would be what I'm looking at because there is only one hard drive. My question: What are the downsides to just installing Windows 7 64 bit over Windows XP 64 bit, rather than backup files -> reformat -> clean install?
View 2 Replies
View Related
Oct 7, 2011
I recently got a new computer, built it from the ground up for gaming. My school is part of MSDNAA fun time so I was able to get a free version of Windows 7 64bit service pack 1. I downloaded the files and it was an .iso file.
The first try, I ended up burning the .iso file its self to a disk with out mounting it then downloading the files onto the disk that way. So that didn't work.
The next thing I tried was downloading the actual files needed to install the OS onto a flash drive. The reason that didn't work was because I didn't format the flash drive correctly before I downloaded the files onto it. I then tried to format the flash drive but now I can't even open it or do anything else with it.
I ended up asking a friend who had a boot disk for Windows 7. The only problem is that he didn't know if it was 32 bit or 64. This disk actually worked... the only problem is that it's 32 bit.
I ended up getting another disk and downloaded the, what I believe, right files onto it. Popped it into my new computer to hopefully install the 64 bit version of the OS and over right the 32 bit version, or have it reformat my hard drive then install the OS. So far it isn't working.
Is there any advice I could get from you guys. I was thinking about wiping my hard drive and starting from scratch, hoping that the 64 bit disk I burned would work. So far, I haven't been able to actually wipe it, so I'm at a bit of a cross roads.
View 7 Replies
View Related
Jun 5, 2012
I am currently running Windows 7 Home Premium on a basic HD. I recently purchased a new SSD and a full installation of Windows Ultimate.
I would like to install Windows Ultimate to the SSD and use my old HD as a secondary storage device. Most importantly, I do not want to lose any of my documents or personal files currently stored on the old HD.
I'm looking for advice or recommendations on the best approach here. Should I do a full Win7 Ultimate install to the SSD and leave Win7 Home Premium on the secondary drive? Or, is there a better way to migrate files from the secondary drive to the new SSD and then format the old HD?
View 5 Replies
View Related
Feb 18, 2010
My machine (a very powerful 64bit one) wouldnt let me update from XP Professional to Windows 7 64 bit, but would allow me to update (clean install) to 32 bit. Now 32 is in can I upgrade to 64?
View 6 Replies
View Related
Apr 22, 2012
I was looking up previous topics regarding upgrading to Windows 7 and was not really finding any definitive answers. I have been perfectly happy and content with Windows XP Home Edition SP3 and have been flirting with the idea of upgrading to Windows 7What brought me to this was I want to install and play Battlefield 3 which only runs on Windows 7. I have a nice system even by today's standards, so I ran the Microsoft's upgrade to Windows 7 app checker. It told me that most programs would be fine but there are some like K-lite's Codec Pack and such that it is unclear if there is compatability. Now I am not going to backup data, clean install Windows 7, and reinstall all programs and apps just to play one game.
View 5 Replies
View Related
Nov 19, 2012
My pc is old.500gb space, 2gb ram.Tired of xp, I want to upgrade to win7 ultimate. I have original cd.One of the reasons im doing this is becoz, I'm a gamer and lot of new games are not supporting win xp anymore.
1. How to do it?
2. I have 180gb worth data on pc, is it possible to recover/keep data as it is without transferring it somewhere else (I have 4 drives)
3. can i have xp on 1 drive and win7 on other?
4. I dont know which version I have, I think its 32bit. My xp is also 32bit , does it matter?
5. I have all installation cd's, everything. what else do i need?
6. How to connect to internet in win7. I have win7 on my laptop and I dunno how to.
7. my Dvd drive is not working properly , my sis has win 7 in usb , can win 7 be installed from usb?
View 6 Replies
View Related
Oct 26, 2012
I am new to this forum, I was a Desktop/Network engineer (before Windows 7 came out).I would like to hear any tips or tricks on upgrading from 32 to 64. I know you have to completely reformat ETc. To give you a slight heads up my HDD is already partitioned and its a new notebook 8MB fitted Ramm (but obviously only 2 MB being utilized (careful choice of words there!) I am currently checking first my hardware drivers to make sure there compatible
View 4 Replies
View Related
Sep 22, 2010
Although we have tutorials on this subject, I was impressed by this presentation of this common scenarioYou have to opportunity to print the entire tutorial and also to view the video.I can recommend this MS tutorial (and I don't always do that).Upgrading from Windows XP to Windows 7
View 3 Replies
View Related
Jul 17, 2009
Is it possible to mount Windows 7 via PowerISO and upgrade like that? Or is burning it to a DVD the only way to do it?
View 4 Replies
View Related
Dec 26, 2011
Already installed Windows 7 Professional 32 bit via valid MSDN account. I now want to go to 64 bit as 32 bit version cannot address all of installed 6gb RAM.
My question is did my original MSDN download include both 32 bit and 64 bit versions and therefore I can 'reinstall' from that iso or do I have to download specific 64 bit version and use the same key ?
View 6 Replies
View Related
Apr 17, 2012
So, I recently upped my RAM capability from 4Gb to 8Gb DDR3. My Processor (a core i3) is 64 bit compatible, and I want to upgrade to 64 bit windows 7.
Just a few things to note here: I have 2 physical hard drives. a 250Gb one that is my main boot drive, and contains the 32 bit windows 7. The other is a 320Gb one that was in my old PC before I upgraded, and transferred it over. This second hard drive still contains Windows Vista, and I access files, games and programmes from it regularly.
My question is this, With this set-up is it feasible for me to upgrade to 64 bit? If so, what would be the best way to go about it? (I have read up a bit on microsofts own page).
View 9 Replies
View Related
Feb 26, 2012
I managed to fill up a 250GB HD so I installed a 1TB in the spare bay then used the Seagate drive copy utility to migrate the OS and all of my data. Once I made the new drive the 1st boot it became obvious that something was wrong. It boots slower and just doesn't seem as fast overall. Its a faster/newer drive so I can't figure out what's going on. Anyway, after much consideration I have decided to put W7 64 bit on the new drive then move data over to it as needed. There isn't enough room on the old drive to download the upgrade so do I need to buy the upgrade in disk form or can I download and run it from the 1TB drive?
View 6 Replies
View Related
Dec 3, 2012
I have a Samsung N150Plus netbook with 1GB RAM, if I upgrade my current Windows 7 Starter will that improve the performance? I am currently unable to use Skype because it is saying that my computer is running too slowly and I am getting this message 'reduce the system load or upgrade the physical memory' What are my options? I seem to get conflicting advice when looking on the Internet.
View 3 Replies
View Related
Dec 30, 2010
i recently upgraded my laptops RAM from 2GB to 4GB but only 2.93GB is usable. i started reading around and i found out that it was because im running 32bit windows 7 and not 64bit. so i wanted to know if there is anyway of changing from 32bit to 64bit without paying for windows 7 as my windows 7 came already installed on the laptop.
View 1 Replies
View Related
Oct 12, 2011
So I'm trying to upgrade to Windows 7 64-bit. I boot it up, do the clean install, works like a charm for a while, restarts a couple times. And then it just goes blank when the username screen should load up. I've tried repairing the OS, reinstalling Vista and then reinstalling 7 again. I dunno what else to try at this point. I've tried it a couple times now and always does it
View 2 Replies
View Related
Nov 27, 2011
ok quick question upgrading from vista to 7 do files get saved automatically in the restore partition that i have, or do i need to make a disk with all my files from old os.?
View 3 Replies
View Related
Nov 13, 2012
I am wanting to upgrade my computer from xp to 7 ultimate. It says to backup all files onto external hard drive but i don't have one. what would be a good program to use for this. after up grade will i be able to put all the files back on the computer without all the xp extras?
View 5 Replies
View Related
Aug 14, 2010
I currently run a 3.0 GHz Pentium IV HT that runs well on XP. I think the processor was built especially to be run with that OS. However, I'm thinking about upgrading to 7 and while everything looks compatible thus far, I haven't been able to figure out whether HT will work with 7. Should I just stick with XP?
View 9 Replies
View Related
Feb 11, 2009
I am going to be upgrading my motherboard, along with the processor and memory, with an existing Windows 7 installation. I always expect things to go horribly wrong, of course, so I have backed up as needed. Still, I would really rather do a successful upgrade of the OS rather than a clean install.I know with XP you can just do a repair install before letting the OS boot with the new hardware, but I have never upgraded this way with Vista, and I expect 7 is similar to Vista. I saw that it may help my chances to delete the current IDE controllers before the change ( MSFN Forums > New Motherboard upgrade with Vista ). Does that mean I just delete the relevant drivers in Device Manager? I'm not clear about exactly which drivers this entails in Device Manager. And the following link is for XP, but I'm wondering how relevant it would be on Vista or Windows 7: How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP, or Windows 2000 The new motherboard should be fairly similar otherwise, it would be updating from an AMD SB600 south bridge to an SB700, but it's staying with an AMD brand chip etc.
View 9 Replies
View Related
Sep 2, 2010
I am planning to upgrade Windows Vista Home to Windows 7 Professional. If my thinking is correct then I will have to do a clean install for Win 7 because I can't upgrade straight from Vista Home to Win 7 Professional. What I need to know is if I run the backup utility on Vista to backup my music, docs, pics, etc. if it will be restored into the correct folders in Win 7? (I've never done this type of install before).
View 6 Replies
View Related
Nov 17, 2010
I was given a laptop at work. It came with win 7 home. The workplace has access to a win 7 pro dvd for which apparently no key needs to be entered.
1. Can I upgrade using win 7 anytime upgrade using the in 7 pro dvd from work? Or does it require a reinstallation?
2. If it is a reinstall, is there some way use the drivers already on the laptop to make things easier? There is a recovery partition on the laptop ~16GB, there is also a drivers partition.
3. If I can do an upgrade, can I change the language? The current language on the laptop is european; the language on the win 7 pro dvd is english.
View 6 Replies
View Related
Apr 21, 2011
so I'm upgrading from 32-bit Vista to Win 7 64-bit. I know I need to backup all my data and completely wipe my drive clean.My question is this, and it's probably an easy one to answer: I have two hard drives, one of which has the OS, the other obviously does not. I only have to wipe the drive that will have the OS on it, correct? Should I disconnect the 2nd hard drive while wiping/installing 7 just in case?
View 4 Replies
View Related
Dec 13, 2011
Im trying to upgrade my 32 bit home premium to 64 bit professional. I bought the new key from the student website and downloaded the files and extracted them. Then i burned those files onto a DVD and restarted my computer and modified the BIOS to have the first start priority to be the rom drive. The problem is that it seems nothing is executing when the CD is executed and it just goes right to the currently installed OS. I used the standard windows burner, is there something i need to click to make the CD executable?
View 6 Replies
View Related
Feb 20, 2012
I have a Windows 7 upgrade disk and a XP upgrade disk so is there anyway to install Windows 7 from these two disk and a blank hard drive? I also have a windows 2000 disk.
View 6 Replies
View Related
Mar 18, 2012
I have an old Dell Dimension 5100 running XP with a 150GB HD and only 1GB of RAM. I'm going to check with Dell if the system will support Windows 7 as know I can upgrade the RAM to 4GB which I believe is the min needed for Win 7. Assuming this is the case I am wondering if I can also upgrade the HD to a 320GB one I have spare. My cheapest route to upgrade is I can access a cheap achademic upgrade from XP to Win 7 Pro.
So the question is how do I get from XP on one drive to Win 7 on the other drive since the upgrade only operates on the drive with XP installed. I can either:
a) Do a clean install on Windows 7 on the XP HD and then do something fancy to move the whole thing to the new HD?
b) Do the fancy transfer first and then upgrade to Windows 7?
I suspect the answer will be to do the clean install first and then use something like System image and restore tools in Windows 7 to transfer over? I did find the tutorial on using sysprep in Windows 7, but not sure if that is in additional to the system image method or a differnt method.
View 5 Replies
View Related
May 30, 2011
Yesterday I was trying to upgrade my Old pc from xp 32bit to 7 64 bit and it did not work. I have run upgrade advisor on it and done a backup of all my files that are on it but it will not upgrade, I have also tried to upgrade to the 32 bit version of windows 7 but it didn't work either. Here are the specs of my computer: P5Q SE2 motherboard. 6gb ddr2 ram, Pentium 4 @ 3 ghz, not sure what the graphics + sound cards are and 2 sata 3gb/s hard drives.
View 2 Replies
View Related
Jun 28, 2011
I'm currently in the middle of building a computer to run maya. I don't have enough money for the graphics card yet (gonna use intel integrated for now) and am planning to upgrade the RAM later in about a month. What I'm wondering is, if I install windows 7 OEM, will I be able to upgrade those parts later without having to install a whole new windows?
View 7 Replies
View Related
Jul 17, 2011
will go straight to the question.I have a NEC AccuSync LCD73v monitor.I am thinking of upgrading my system to windows 7.Will my monitor be able to work with win7?
View 2 Replies
View Related
Sep 30, 2011
My cousin owns Toshiba Satellite L305-S5937 Laptop.It has only two disk drives, C and D.Currently C has windows Vista.So I tried installing Windows 7 on D drive. The windows setup installed everything, restarted, it showed 'Preparing windows for the first time' and 'Checking video performance'. Welcome screen appeared.After that, it restarted again on the welcome screen, saying- logging off, windows is shutting down.This time when it started, beyond toshiba screen, it said:'BOOTMGR is compressed'.I never had such a problem with installing windows.Even vista wont work.So i booted from the disc again, thought of jumping onto vista again.Formatted the drive from windows installation disc, on which i installed windows 7.Restarted again.Still the problem is the same.BOOTMGR is compressed.
View 7 Replies
View Related
Feb 29, 2012
I'm currently running a 32bit version of windows xp and want to upgrade to a 64bit version of windows 7 (yes I'm sure my computer can handle a 64bit os) through the student discount program , but I'm fuzz about a few things. I know that going from a 32bit os to a 64bit os that I will need to do a clean install but I would be buying it through a download so would I be installing windows 7 off a usb drive? Or have to burn it onto a disk? And since it says upgrade would that mean that it can only upgrade with a previous version of windows installed that is compatible with the new one? Also without buying the backup disk would I be able to get this download again if I wanted to do a clean install to speed up my computer?So would I be able to buy the "Download (64-bit)" and be able to successfully upgrade? (Don't care about losing information, this is a freshly formatted version of xp anyways)[URL]...
View 4 Replies
View Related
