Unable To Connect Wireless?
Oct 11, 2012Model - Sony vaio S serise svs13112enb unable to connect wireless
how to configured sony vaio laptop wireless setting
Model - Sony vaio S serise svs13112enb unable to connect wireless
how to configured sony vaio laptop wireless setting
the icon says i am not connected and there is a network available but i am actually connected!
View 9 Replies View RelatedI have Windows 7 and have a wireless internet set up. If someone else connects to the network, I cannot connect with my computer. The network is encrypted, WEP I believe. The password is 26 digits long (don't know if that helps)
View 4 Replies View RelatedJust started having problems connection to any network or internet. Have new lappy that was working great until today. I am going out of town for a while and I was setting up my Slingbox. Somewhere along the line, I lost ANY connections, even to the router.
Have tried 3 different restore points. Can connect with wire to the router & get internet. HP, 64 bit.
I have recently moved to Sky Broadband and I am experiencing difficulties regarding my wireless connection.
The device in question is a Sony Vaio FW56E (Windows 7, home premium , 64 bit). I initially contacted Sky regarding the connection but as all my other wireless devices (Blu Ray, Ipod, Vista notebook) connect without any issues they could not help.Sky have confirmed that it is not a fault with the Router and that it must be a software/hardware issue with my Vaio.
My Vaio is connecting to the Sky network but I cannot actually access the internet. I have checked all the settings and checked my wireless password. I have also looked into my firewall settings and tried to connect with windows firewall disabled.
Listed below are all the steps I have taken to try and resolve this issue.
Reset the Rouer
Removed the Sky network and reconnected again.
Checked that the wireless is actually enabled.
Changed the wireless channel several times.
Updated the VAIO via windows update using the Ethernet.
Reset the router.
If it is of any use the Rouer Sky provided is a Sagecom F@ST2504n.
Have a brand new pavailion quad cord windows 7 home premium 64bit. i also purchased a usb wireless adapter[url]...
this adapter was working fine for a few hours. the internet connection is cable, the adapter gets about two bars of connectivity, and now when i try to connect to network i get unable to connect to network. i have removed the wirless network, have added it back, entered the security key and nothing. i have a netgear wireless router. not sure what the deal is. i have made sure the power settings on the adapter are off, and this adapter doesnt seem to have the sleep mode option on it. windows 7 also found the drivers automatically. the machine is brand new, other machines/devices on in the house get to the internet just fine.
I previously bought a used laptop running Win 7 Ultimate which I am the administrator and for ages I have wondered why I am always unable to connect to adhoc wireless networks, connecting to wireless access points have no issue though.Connecting to adhoc networks always gives me the 'your network administrator has blocked you from connecting to this network' message. I recently found out, as below there seems to be a group policy set in place?Can anyone show me how I can disable this policy please, without having to reinstall windows 7 again as that would really be too much effort for me[CODE]
View 3 Replies View RelatedWhen i am in sch, i can use my sch wireless.However, when i reached home whenever i try to connect to my wireless network but its say unidentified network. My sis have no issue with the internet.The problem is solved whenever i restart my modem. Anyone here can kindly tell me how to solve this problem? I am running on windows 7 professional with my sch domain connected to my com.
View 2 Replies View RelatedI have a fairly new Toshiba Satellite P755 laptop and just started having an issue connecting to my Netgear wireless internet network since yesterday. The issue is that every time I turn on my laptop after it was off or hibernated my computer won't connect to my wireless network but I do see it available to connect to. When I try to connect it won't work unless I reset or unplug the router and plug it in again (Windows Diagnostic Tool says check router access points). Once I do that and wait a couple minutes I can connect to my network again. I have a Realtek RTL8188CE Wireless card and made sure my drivers were up to date. I have tried unchecking the option under Device Manager to not use it if the battery is low and that didn't work. I also tried to system restore and when I did that I got the following error: (0xc0000022) which says an unspecified error occurred and my files and settings were not changed. I have AVG Free 2013 and haven't made any new changes or updates recently.
View 6 Replies View RelatedYesterday I moved into a new apartment in Vancouver, Canada. Several friends came up with me to help me move in. My friends were able to connect to the wireless network. However, as soon as I tried connecting to the network, the wireless signal began to appear and disappear rapidly for everyone connected, effectively cutting off wireless access. This problem only occurs when I sign on. Furthermore.
[code]....
My windows 7 machine is unable to connect to my internet through the wireless bridge I've set up on my WRT54G using DD-WRT. It seems to be connected to the network as it sees the other computers that are on it but there is no internet access. Every once in awhile it gains access and then abruptly loses it in a matter of minutes. The router supplies internet to anything else I plug into it, be it my Xbox or laptop running XP.
View 2 Replies View RelatedMy desktop (windows 7 ultimate 64bit) has been able to connect fine to the internet until I got home from work this morning. My laptop is connecting to the same modem fine through wireless (along with my wii). The modem I am using is Motorola SB 901. When I rightclick my connection on my desktop and hit troubleshoot problems, I get 'local area connection 2 doesn't have a valid ip configuration'. Same thing happens when I switch the ethernet cord to local area connection 1. When I go to control panel, network and internet, network and sharing, the connection map at the top stops between my pc and the network (which is now labeled as 'unidentified network'). Here is a list of what I have done so far to try and resolve the issue:
1. Replaced the ethernet cord with one I know is working
2. Full scanned my pc for viruses
3. Disabled all firewalls and virus protection programs
4. Restored my pc to a previous save state
5. Reset winsock with cmd via these prompts: netsh winsock reset catalog and netsh int ip reset reset.log hit
6. This attempt is unfinished as I am getting stuck. I am attempting to setup a static ip to attempt to resolve the issue, but when I open cmd and type ipconfig/all, the default gateway under my local area connection is completely blank.Here is what comes up with ipconfig/all:
C:UsersPaul>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Paul-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
Can anyone advise how I would go about fixing this. I am trying to connect to a network (I have a dell running on windows 7) and it keeps telling me that windows is unable to connect to the network-this is before I can even enter the security key. I know it is not a problem with the wireless because other people are able to connect to it fine.
View 2 Replies View RelatedMy notebook is an ASUS G53SX - A1 with an Atheros AR9002WB-1NG wireless card. I was able to connect with a cable.
When i try to connect wireless i can see the network and even it's strength but when i try to connect i get the message "windows was unable to connect to xxxxxx network". the driver are up to date and i can connect with other laptops to the same network.
I tried uninstalling my driver..but everytime i scan for new hardwares..it will detect and automatically the the previous driver will occur..i dont know why it happens..
its a netbook Acer ..and a Broadcom 802.11g adapter..
I have both x86 and x64 Seven installed. Wireless Card is Realtek 8185 b/g, router is belkin 802.11b
For x86, 7000-7048-7057 all connected to the 802.11b router with WEP 128bit without problem.
Since 7057, I installed x64 Seven and verified that the WEP key is correct. But, it just can't connect. "Unidentified network", Access type: No Internet access. ipconfig /all tells me that I didn't connect to the router at all. The router's dhcp didn't assign the x64 any ip.
If I boot up the x86, I then can go to Internet without problem.
I tried the troubleshoot. The program reset my wireless network card then let me retype my wep key. At the end, it was unable to fix the issues and it lists the problems as below:
Windows cannot connect to "....." Detected
"Wireless Network Connection" doesn't have a valid IP configuration Detected
Now, if I manually set a valid IP "192.168.2.3" and mask "255.255.255.0" and gateway "192.168.2.1", I still can't connect to the router. But, from the router side, the dhcp list shows my x64 ip address.
Also, even if I reset the router to Open (without WEP), x64 still can't connect to the router. None of above can make me ping the router. So wired.
Please help me. I do like x64 over x86, because in there the office 2007 and SAS 9.2 won't freeze/without response. And, I don't have the lan access to the router.
I cannot use wireless access, getting msg. wireless lan adapter has been disabled in device manager, checked device manager there is a Network adapter, (Realtek PCIE FE Family Controller) and then there is Other Devices under there is the network controller(yellow !). Downloaded controller drivers from HP,( sp53955) and for some reasons the drivers are not installing. Also when I try to set up a wireless connection all i can get is broadband and cable. I am quite sure this is because there is a problem with the wireless adapter.I continued my search and discovered that this notebook uses the Atheros ar9285 wireless adapter, I disabled the unknown network controller and enabled the Realtek since this one appeared to be the one that was installed by HP.
View 4 Replies View Relatedi can connect with wireless but can not to connect to my lan .yesterday i could connect but after removing windows secure surfer,i got this problem.
View 1 Replies View RelatedRecently I have encountered a problem where my IE as well as MSN is unable to connect to the internet. They happened around the same time, thus I believe the problem is linked. It simply says "Internet Explorer cannot display the webpage".The thing is, everything else I use has no problems whatsoever. This ncludes google chrome, firefox, AIM, skype, WoW and all kinds of stuff.I've tried a lot of solutions with regards to tinkering around:Control Panel > Internet Options > Connections > LAN SettingsI've also tried virus scans, resetting IE settings to default, reinstalling of both IE and MSN and nothing seems to work
View 8 Replies View RelatedI got a brand new HP with Windows 7 and it will not connect to my network. It sees it and I have another laptop connected to it as well as a desktop hardwired to it. Like I said, this thing is brand new.
View 13 Replies View Relatedas of today i am not able to connect to my home network it used to work perfectly before but now when i try to connect it says unidentified network no internet accesit does work on all the other laptops herei also can conect to my neighbours wireless internet fine and when i plug the cabel in its also workingany ideas on how to fix this (not so good with computers so try to be gentel) ?
View 3 Replies View RelatedIm having serious problems connecting Win7 Home premium 32bit to my WLAN. This connection previously worked fine under XP.Win 7 Fully patched Windows home Group services disabled.WPA-Personal b/g channel 11 enabled on router.WN is broadcasting and WIN 7 sees the network.Router F/W is patched but its an old router however my work laptop (same make and model will connect)Wlcan card driver updated to latest version.Ive created a profile manually which fails to connect.Connecting via the Wireless icon fails..I am able to connect if i set router as unsecured..Rebooted router (which has now killed my already poor sync speed)
View 3 Replies View RelatedI'm trying to connect my laptop to my works wireless printer to print some word documents. I can't get it to connect.
View 5 Replies View RelatedI'm running 7 Ultimate & have no problems at home but when I go out to my local diner I have no internet access. I have a great connection to their router but cannot connect to the internet. Once in a while,like maybe 1 out of 20x it will connect. I see folks on a weekly basis using the internet with no problems.
View 5 Replies View RelatedI have a problem my HP Pavilion dv5-2035dx it can't seem to connect to any networks anymore. It was working fine two nights ago, and now it can't connect. It can locate the networks, but every time I try to connect to one it will give me a cannot connect to network. Troubleshooting does nothing as well.
View 4 Replies View RelatedI am using an Atheros AR9285 802.11b/g/n WiFi Adapter. The adapter can detect the available SSID wireless connections in my area but not able to connect to them.
View 1 Replies View RelatedI can see the wireless connection on the laptop but it won�t connect.this networks no needed user name and pass to connect.my laptop is vostro 1015 os: windows 7 ultimate.
View 2 Replies View RelatedI have an Acer TravelMate 5740G (all other system specs are fine so i'm only posting the networking relevant stuff) and it does not connect to wireless networks - Acer Nplify 802.11bgn from a broadcom 802.11n wireless adapter apparently has the best driver (as advised by MS device manager)this pc has been able to connect to a grand total of 2 wireless networks?
1. at uni it connected on its own for 15 minutes, any time i've attempted to manually connect it says "could not connect to [network name]"
2. connected just fine to a 3g iphone 4 acting as a portable hotspot at home, my wireless settings are as follows:Open WEP PSK w/ 1 key index everybody else in my family can connect to this wireless network i can connect with my phone, my dad with his lappy, my friends with their lappies. there are NO xp computers in the network there are 3 Windows 7 desktops on the network the internet works just fine with the rj45 cable ---> i'm 100% sure the issue is not with my home network config OR the router at uni, the router + settings are not the issue because they service 15,000 people a day without issue ---> i'm 100% sure the issue is not with other network configs OR their routers i have tried every change under the sun (that i know of) with my laptop's own configs.i've attempted to update all the WNIC drivers, i've made the WNIC as open to connections as i possibly can.i have disabled ip6 and tried, i have enabled ip6 and tried, and i get no connections happening. i'm at the end of my wits, i just want my wireless to work, and i have NFI how to make it happen.
I cant connect to my wireless network because it says no connections are available and theres a red X over an icon that looks like a computer
View 2 Replies View RelatedI've got a handful of Dell laptops that recently stopped reconnecting to a wireless network after being on the lan. WLAN shows connected, but can't reconnect until we do a IP refresh. Some machines are running Dell WLAN cards and another is running Intel card. Can't seem to nail down the problem. One user mentioned she was having this problem after MS updates so wondering if a patch/hot fix is jacking up these machines. To add salt to the wound, I brought my Dell Inpiron 1420 home today...plugged in the network cable..did some work, then decided to move to the couch.
View 7 Replies View RelatedI have a laptop (HP Compaq cq62) with Windows 7 64 bit and I have a strange problem with my wireless adapter. When I close the lid the laptop goes into sleep mode. When I open the lid and log in on my laptop, the wireless adapter can not find any routers. I have to go to my network settings window, disable my wireless adapter, enable the wireless adapter and then it is working.
View 5 Replies View Related