Turning A WDTV Device Into A Media Center Extender?
Dec 14, 2011
I'm well aware that the WDTV devices (specifically, my WDTV Live HD) don't function as MC Extenders.And while I've seen developers out there that have hacked these players (specifically, this guy), I am unable to be able to get his hacks to work properly. I figure, I like the way Media Center looks in Windows 7, and it's a whole helluva lot easier to use than WD's menus (for example, I can't simply search for an artist or album or title while browsing through the Music folder), why not just try to find someone out there that's been able to turn WDTV devices into a WM Extender.
I have been tearing my hair out for 2 days now trying to figure this out. All I want to do is connect my xbox 360 in my living room to my xbox through Media Center and watch some movies on my computer on my living room TV. But it simply is not working. I get the error "Cannot Set up Extender" every single time i input the code into my computer that my xbox gave me. But, my dad's computer (windows 7 ultimate x86, connected to the network with ethernet JUST LIKE ME) works perfectly fine and connects instantly. And so does my netbook with the same OS but on wifi, I have been doing everything that google has been telling me through my search results. I have so far narrowed it down to a problem with my computer.
I setup the windows media center extender and it works fine. But my issue is with my Computer. My proccessor is maxxing out whenever the process for the Media Center Network is running. The only solution i have found is to end the process manually. But it will randomly re open the process on it own and cause my proccessor to max out and use about 3/4ths of my RAM. It still re opens the process even when my 360 is shutdown and media center is not be used on the PC
i am trying to connect my xbox 360 as an extender. i get all the way through the setup and it fails at the last step. i have gone into my firewall and the media extender is ticked to allow. i have also manually set up rules to allow all the ports i found on the microsoft site to be allowed. lastly, i tried the microsoft fix it tool on the microsoft support site. i have run out of ideas. the xbox is definitely on the same network as me, it can see my laptop and also my iomega iconnect when i go into setting and network connections. it tests positively when i test the network connection, but fails when i test the media centre connection.
i have gone through the setup 3 times now (i.e. reset the connection and put in another 8 digit code to set up) but still no luck.
My xbox has been connected as a media center extender to this computer and router combination for several months now. The router is a Buffalo WZR-HP-G300NH. Earlier this week the media center extender was having trouble playing back video. After a restart of the computer the extender was no longer connected.When I try to add a new extender I get the message "Cannot add extender". Microsoft says to enable upnp and multicast. Check. Reflashed firmware to dd-wrt. No luck. Flash back to buffalo firmware. No luck. Try an old Linksys WRT54GL I have lying around. No Luck.The event logger has this error: "Media Center Extender Setup failed as the Extender was detected on the network but the UPnP search for the Extender failed (timed out after 20000ms)." Event ID: 538 Now I've done everything I could find about enabling network discovery, allowing anything to access media and such. Network and sharing is set pretty much wide open. I've also tried switching between home and work networks.With that said, I decided to check and see what updates have been installed. It turns out that an update was applied on the day I started having problems. It says it cannot be uninstalled. Description of the Windows 7 and Windows Server 2008 R2 installation software feature update Note: I do not have system restore points. Small SSD and didn't take the time to figure out how to save them elsewhere.
I recently installed a Media Center server as a centralised location for all my media including broadcast and satelite TV. I view / play media using Xbox 360's as Media Center extenders. The setup was straight forward and works really well across my network. However I have one issue that I can not resolve.
Any items that have been recorded on the composite video input (satelite TV) of the TV tuner card in my Media Center server are in 4:3 aspect, but only when watched via xbox. If I watch these recordings directly on the Media Center server, they are in the correct 16:9 format. Xbox squashes the picture and puts black lines down either side of the picture. It does the same thing if you watch live TV from this composite video input. Digital TV inputs work fine.
Perhaps this is related to the file format used by Windows 7 - WTV, which from what I have read seems to have additional information embedded.
I have a USB TV Tuner which works fine to watch TV in WMC. However, when a programme is set to record, and my laptop goes into sleep mode, I believe it turns off the USB TV Tuner, and therefore the programme doesn't record. WMC support center says that the program is able to record when the computer is in sleep so I know it is not the program which is the issue.
I've installed and re-installed the XBOX 360 Media Center Extender to many times to count. Each time I install it the thing fails - absolutely will not connect with my Xbox. The _only_ way I can get it to work is to disable the Windows Firewall. Probably not the ideal thing to do.
Is there a way I can keep Windows Firewall enabled? Some of the tutorials out there say to add an exception for "Media Center Extenders", but nowhere do I see this within the settings. My system, BTW, is Windows 7 Ultimate.
Additionally, I should add that I'm hooked up wirelessly from both machines (PC and Xbox). When I connect the Xbox (when the firewall is disabled) I find the browsing is painfully slow. Any workarounds for that as well?
I'm in grave problem here. I just installed windows 7 x64 a few days back. And initially I installed the 32bit version of k-lite codec pack for my windows media player. The media center worked fine then. It was loading my ffdshow and ac3filter along as I checked it.But then yesterday I noticed that the same pop-up od recommended/express install of WMP came again. Initially I thought that it must be some bug or something, but then when my MKV and AVI files didn't work in WMC, I realized that somehow WMP x64 got triggered, and now it is using the x64 bit of WMP in WMC. And I just wanna revert back to 32-bit WMP in WMC.
I can't get eithe WMP or MC to play a DVD. I've set the region code. WMP acts like it will play, but then just goes blank, and MC says it cannot play the DVD. These are original discs, not burned copies. I have a custom built system, with 2 graphics cards (GTX 260 and a GT 220) 6 GB of RAM, and an i7 processor. Any help would be greatly appreciated.
I'm trying to turn off the sound on the media panel on my Toshiba A500-02J. The sound is muted when I mute it off the panel (that is, until I press volume up/down). But I'm trying to stop the beeping when pressing the volume buttons. I've gone to the system tray, and speakers, and turned off system volume. I've also gone to Sounds in the Control Panel but I haven't found anything specific on this.
I'm not sure whether I need to use a Toshiba application or just a general Windows one to turn it off.
When I open Windows Media Center - Internet TV is listed.On the windows website it shows that I should have that option.So, I assume I don't have something set up right.I have a TV tuner and I can record and watch TV just can't get to see the Internet TV channels.
I am running Windows 7 on a new computer with no TV tuner. I am unable to see Internet TV or Netflix in Windows Media Center. When I try the automatic download (Download Now) option, I get an error message that the Guide cannot be downloaded.After looking at these message boards, I have tried turning off my firewall before downloading and tried adding the Media Center programs to the allowed programs in my firewall application, but I still get the same errors.
I am building a Media Center PC. I have two questions relating to Windows Media Center:
1) I can watch TV via TV card, but can I watch TV from another source such as HDMI or AV from my satalite reciever or PS3?
2) Can WMC work with a dual monitor graphics card? I would like to transmit the media center screen via AV to monitors & speakers, while being able to use the PC for other use via VGA connection.
I used to run media centre wired and it worked fine. Trying to clean up cables running all over the place Ive tried wirelessly yet its almost to the point that it doesnt work at all as its incredibly slow and takes about a minute to react to controller input.Im running a TP-LINKTD-W8930N 300Mbps router.
in Win 7 Ultimate I insert a DVD, and the only options for playback are Windows Media Player and Real Player - with Vista, I used to have an option to play the DVD in Windows Media Center, which is what I want. Is there a way to get this option back?
I have installed Windows 7 Professional on my laptop and it has Media Center. But I can't see any way to access Netflix. Is Netflix support available on Windows 7 Media Center?
Netfix is shutting down Media Center when we try to watch a movie. It was working fine but this morning every time we try to access Netfix we get an error saying Media Center shutting down and restarting?
Have a Dell Vostro 3500 running Win 7 32 bit. When trying to view a pdf from within IE, it will attempt to open it with Windows Media Center. Adobe Reader has been installed, and when checking file assocaitions in Windows and IE, they are set to Adobe Reader. Now, if you save the pdf to the desktop, or some other location on the hard drive, it will then open with Adobe Reader as it should.
I have Asus 4550 video card The drivers are crashing in MCE very frequently ( Black screen and then BSOD and instant reboot so I can't even read the error) I tried driver that was optional in Windows 7 update, Catalyst 8.12, 9.1 and Windows 7 beta - they all behave the same way .
On my main computer I have added my folders of music and movies to the libaray ....
In the HTCP remote computer I set the home group etc ... I open Media Center .. I can scroll to shared and see my main computer but non of the files appear.
I have gone to the main computer and checked share this folder etc ... Still cant view the files.
While playing a DVD in Windows 7 Media Center (in version 7100, 7203, and 7260) that has been copies to the hard drive (in Video_TS format with AnyDVDHD-v6.5.5 running in the background), and using the My Movies plugin (tried both v2.54 and the new v2.55), if I press STOP on my Media Center Remote, the DVD stops, but is more in a Paused state. Let me see If I can clarify what is going on.
1. DVD's in Video_TS format play fine, can pause, FF, Rew, etc without any issues.
2. If I press stop, the DVD does stop. Then I would normally hit the BACK button to go back to the movie list. However, when I hit the BACK button I go to a new blank screen (with the media center blue background). I then hit BACK again, and am takin to a screen with movie details. If I hit BACK a third time, I would then return to the movie list.
3. However, once back in the movie list, I can see the stopped DVD in the lower left corner of the screen.
4. I can't seem to stop the movie like in Vista Media Center (which would automatically take me back to the movie list.
5. Also, if I click on the movie in the lower left corner of the screen, it comes up and starts the movie from where I left off. With Vista Media Center, a stopped movie would actually start over from the beginning.
Has anyone seen this problem, and know of a way to make it work like Vista Media Center?
need help in changing the DVD Audio setting under MC, DVD Audio setting menu. I want to change the audio setting to "Theatre Mode", instead of "Night Mode" ... to provide a full range of sound, but this option is grayed out. Does anybody know how to change this ..
I tried changing it under Media Player but it does not affect the Media Center setting.
I have worked w/ techs from all over the world to generate these REAL solutions--they might not solve ALL of your problems but WILL solve some. BEFORE you do anything--verify the correct computer time & time zone. In ALL cases if time or time zone was incorrect--re-install media center. Media center fails to recognize your set-top box or remote.After attempting a manual set-up w/ all possible codes & failure--exchange your set-top box w/ cable company for a different model as media center does not have all the codes within it--if not--borrow one--you will see.Verify the correct computer time and time zone.Media center fails to recocnize your IR cable sensor.Unplug & re_plug the cable. Relocate the IR sensor over the IR receiver on set-top box---use a bright flashlight to locate the sensor.Media center fails to download the correct channel guide
Verify the computer time & time zone. Re-install media center. Verify w/ cable company that you are slecting the correct guide download for your location. Verify w/ your cable company which guide you are viewing on your TV by having them tell you on the phone what program you are & should be viewing--careful--they make mistakes. Try reinstalling media center & selecting a different guide than you think is correct.Media center fails to switch channels automatically to record TV on different channels.Verify the correct computer time & time zone then re-install media center. Media center channel guide download options.Essentially, there are no options--automatic or manual--you cannot change what you selected in the set-up w/ out starting the set-up fresh.Re-set media center guide download to different guide
1st--verify computer clock is set to correct time zone & time--completely re-install media center.This is NOT possible--the ONLY way to accomplish this is to re-install or reset media center--go to settings, tv & start from scratch
1st--verify computer clock is set to correct time zone & time--completely re-install media center.This is NOT possible--the ONLY way to accomplish this is to re-install or reset media center--go to settings, tv & start from scratch
