I'm looking for a Text To Speak software to be accessible from a command line.
TextToSpeech will read text inside the application. I'm looking only for text to be read from a string given by a command line
I have a Lenovo laptop - how can i use Text to Speech, to read/speak to me text on a page?
View 1 Replies View RelatedI would like to know if its possible (and how to do it if so) to justify a paragraph of text in Word 2007 to gradually get narrower.What I mean is, id like the first line of text to be longer than the one after and so on until I end up with something like this,I want the 2nd line to start further to right of first line and end closer to left and so on. Im struggling to show an example but hope you know what I mean. Basically centre justified but going down in a V shape
View 1 Replies View RelatedRecently, I'm assuming a virus or whatever made my system un-bootable. I have a Dell XPS 420 ... Windows 7 ... a single 500GB hard drive with three partitions.
- partition 1 - the OS, approx 250GB
- partition 2 - docs, approx 20GB
- partition 3 - other stuff, approx 230GB
I booted from the installation disc, and I tried everything imaginable to be able to boot up again, but was unsuccessful. So I made the decision to re-install windows, but before that, I wanted to copy everything off the hard drive onto a portable drive.Going into the command line tool ... I am able to read from the hard drive fine ... I copied everything from the first two partitions off to an external hard drive. No problem.HOWEVER ... the system is not recognizing, or not allowing me to see, the 3rd partition. I went into DISKPART and looked, and it does not have a drive letter assigned to it. I can't find it. Something I can do? Or is this part of the corruption of the disc that is preventing me from booting?if I re-install the OS on partition 1 ... will partition 3 be harmed and would I still able to see it in Windows when things are back to "normal"? If so, I won't worry about the previous question and I'll just re-install. But if not, I won't re-install until I can figure out how to get that data off the 3rd partition.
I have a long vertical line (about 4 times the length of the text cursor and about 3/8" to the right of the text cursor) in fields that I would normally enter text. I have tried all of the control panel settings that I think would affect the cursor like themes and mouse pointer settings. This is my wife's computer and she told me that it started doing that a few weeks ago. I am not aware of any new programs except the usual Windows updates and anti-virus updates.
View 6 Replies View RelatedI simply want to add the -nointro parameter to my BioShock game shortcut.
I go to the shortcut, then properties, but where I think it should be added, similar to what XP looks like, is greyed out (the word "BioShock").
What do I need to do? I'm new to Windows 7, coming from XP.
On one of my PCs running Windows 7 Pro 32 bit I'm getting odd behavior when I use command line switches for Windows Explorer.When I create a shortcut with the following command line it works perfectly everytime: C:Windowsexplorer.exe An normal Explorer window opens.If I create a shortcut with the following command line it rarely works. It starts but just hangs and no Explorer window opens: C:Windowsexplorer.exe /e,c:That switch at the end of the command line should cause an Explorer window to open with the C: drive selected on the left pane. That's exactly what it does on all of my PCs except one.Obviously something is set differently on this one PC but I don't know what.
View 9 Replies View RelatedSo I am trying to delete some keys from the registry using command line, eventually I am going to turn it into a batch file because it is something I may have to do frequently. Basically I want to delete a folder full of registry keys without having to list every key individually.
View 6 Replies View RelatedI work within the IT department and i require to install some software etc on machines remotely on our network, the machines tend to be offline due to been portable computers so i wanted to see if there was a way to create a script or something so if did a ping response from command line (ping machine name -t) so that when the machines did actaully appear back on the network i would receive say an email from Microsoft Outlook (exchange) This would be weather the command line has to stay open (which i know i could do with the Asstrix syntax but i dont want to keep it open, just have something to notify me when its back on our network?
View 1 Replies View RelatedExample ProgramData or Any Hinden Folder. Sometime I Don't Need Check Show Hidden Files In Folder Option
View 2 Replies View Relatedhow do u open C drive or any other drive from CMD?
View 4 Replies View RelatedWBADMIN command line parameters provides a possibility to create batch files running advanced, automated backup.But, I need a scheduled task for backup of the entire system image. It seems this is not possible, and that the only way to create a system image backup is by using the GUI?/Per What I'm looking for i the Windows 7 equivalent to the Windows Server 2008 "wbadmin start systemstatebackup" command line parameter.
View 3 Replies View RelatedCan any one help me find an app that will help me do this? I want to automatically generate a line graph from a text CSV file that is matically and constantly generated by another software I have running. Then I want the graph to be displayed/posted to a particular directory on my website, so it can be browsed to and seen whenever needed.
The generation of the data set is done automatically, and a new data point is added to the text CSV file every 30 seconds. It is set up in columns, and I would only need 4 of the 8 columns to be graphed.
I guess the graph could be a jpg and be generated locally and uploaded via auto reoccurring ftp. Or, the data text csv file could be auto ftpd on a schedule to the web directory and the graph be auto generated there every time the text csv file is overwritten.
How can I run a program from the command line as an administrator. I'm looking for a command line equivalent to right-clicking on the program icon and choosing "Run as Administrator".
View 2 Replies View RelatedWhat is the best way (not really sure what I mean by "best") to check file systems for errors?
(1) Run chkdsk from command line? --OR--
(2) Use the "Check now..." option in the drive's Properties dialog box?
Does #2 do the same operation as #1, or are there differences?
How can I run a program from the command line as an administrator. I'm looking for a command line equivalent to right-clicking on the program icon and choosing "Run as Administrator".
View 2 Replies View RelatedWindows 7 has apparently changed the way fonts are installed. I have a web page that I use that when visiting the page it looks to see if a file called barcode.exe is installed in a particular folder and if it is not present it downloads the file and executes it.The exe file is designed to place 2 carolina bar code fonts into C:windowsfonts. This works with no issues in both Windows XP and Windows Vista but is not working in Windows 7. I can manually install these into Windows 7 font folder with no problem, but need to be able to do it automatically. Does anyone know an effective command line to use to place a font into the font folder in Windows 7?
View 8 Replies View Relatedhow to change color depth to 32-bit in windows through command or registry?
View 6 Replies View RelatedI have never needed to use the Windows Management Instrumentation CLI before and i am unfamiliar with the syntax. Any tutorial for the WMI CLI before?
View 1 Replies View RelatedHow do you list/view hidden files in a DIR using command line. (Got it wrong on a test today) couldnt find it im my A+ book on which switch to use. I put /h but apparently that was wrong
View 7 Replies View RelatedCan I make custom keyboard shortcuts eg; say perhaps when I press Ctrl, Alt, R & J it would input my login name to a site I use frequently (and have a simila one for my password)? I can't have windows just remember my login & Pasword as my wife & I log into the same site (Facebook) and I don't want her to have to erase my info every time she wants to log in.
View 2 Replies View Relatedhow to change computer name using command line in windows?
View 3 Replies View Relatedhave two desktop shortcuts to the same exe but with different command-line switches. How can I get them both onto the Start menu? When I drag the first to the Start button, it appears fine - but when I drag the second, it replaces the first. So what even I do, only one appears on the menu.
View 9 Replies View RelatedSeems like in Windows Seven there's no way to add a command line switch when setting up default programs? What I'm trying to do is ensure that Chromium is always opened with this command line switch:-allow-outdated-plugins.I have it in the shortcut pinned to taskbar. All is fine until I open a page via association when the browser isn't open.Chromium has Flash built in. I have it disabled. So without the switch I'm going to keep seeing "your plugin is outdated".I don't understand why command line params when setting up file types has been removed.
View 3 Replies View RelatedI was trying to create a scheduled task via command line (schtask.exe) and I want it to run regardless of whether the user is on battery power or on AC power. I created an event and it runs fine on AC power but when I try it on the battery power, it doesn't work. I checked the task in the task scheduler and saw in the condition for my event the following options checked:
- Start the task only if the computer is on AC power
- Stop if the computer switches to battery power
After I create the task via command line, I can't modify the settings. Either way, I MUST only use the command line to create/modify the tasks. Is there any way to modify this variable? Or am I stuck on only having the task run on AC power?
I have a problem running a task with Task Scheduler. The task doesn't run. I have to debug it. When I try to make it run from the app a message appears on a command line message, but it appears and disappears so quickly that I can't read it. To fix the problem I need to read it to know what is going on.Can someone please tell me how to stop that command line window message from closing, please?
View 9 Replies View RelatedI started my computer today to find it starting up verrrrrry slow. I then repeatedly kept getting the notification box with visual c# command line compiler has stopped working.I looked through various threads via my phone and saw to run a sfc /scannowI tried that under administrator and it says windows resource protection could not start the repair service.
View 3 Replies View RelatedHow can I create a custom command line to be used when I double click on a file with a specific extension. For example for a .jar file I'd like to have this:
javaw.exe -jar "%1" -myOpts
Can you have more than one custom command line for an extension and use the RightClick context menu to chose the one you want to use?
I'm trying to add folders in the indexing options by using either registry or command lines. This is for an unattended silent install.
View 2 Replies View Relatedtrouble is, the Repair Disc is useless. All it does is "Load Files", then the hard drive light blinks for what seems like forever, then a mouse cursor on a black screen, and then. well, nothing. I've unplugged everything but the mouse, keyboard and monitor and still nothing. No matter what I do, nothing. Safe mode, recovery, last known good--all do the same thing.The computer boots Ubuntu with no problem, and I can even see the Windows files. (Is that partition supposed to be 'bootable'? It isn't.) Ubuntu tells me there are errors with the $mft whatever that is.
I just don't get it. When I boot from a disc, I expect the machine to boot FROM THE DISC!What is the machine doing for an hour? Every operating system I've ever had could boot from a disk to text mode with a command prompt. All I want to do is fix the mbr or partition table or run chkdsk and see what the problem is. Why won't the repair disk do ANYTHING?I had to replace my motherboard after it burned out, so the discs from the manufacturer are no use. I'll have to buy a new Windows 7 and reinstall
How to open "All Control Panel Items" from the command line?
View 8 Replies View Related
