Switching To New Domain Emptied All Folders Inside User Profiles
Jul 2, 2012
I work at a company and we are in the process of upgrading our network, and switching to a new domain. When we switched one laptop to the new domain, it emptied all the folders inside of the user profiles. The folder with the users name still exist but the desktop, music, document, etc. are completely empty. Where the files could have gone? I am baffled by this. It worked fine on the other 100 computers except this one.
I get an message that says my profile is not loaded correctly after logging into AD Domain or my account sometimes takes forever to log onto AD Domain.
I always used "switch to other user" when I left my laptop behind for a while (i.e. when I was going to sleep or leaving the house). As I never turn off my laptop (barely never), the point is that I don't want to get people to use my laptop without my permission browsing through my files etc. It's not like I've got something to hide, I just don't want it.
It used to work before, without making the internet disconnect. I made sure that Windows is not configured to turn off the network card when idle for some time.
Im a new user of Windows 7, just turned it on for the first time a few days ago, but Im pretty familiar with the setup since Ive used Vista for over a year now. This Windows 7 machine that I just turned on a few days ago is a new work machine for another employee here at my place of work. Ive gone ahead and already added it to our domain, and I�ve signed onto it using multiple user accounts that were created in our Active Directory. My question is, how can I go about deleting those Domain User Accounts, Profiles, and Files off of this Windows 7 computer? Ive already made the mistake of deleting the user folder in the C:Users folder, just to find out that if I deleted a user and tried to sign back on as that user (thinking it would create a new profile folder in C:Users), it created a temporary profile.
In the past when using XP all I would normally have to do is delete the user profile folder in C:Documents and Settings and I was able to sign back in as that user and have a new profile created.
After doing a system restore, (which was reccomended) I now can by no means access any 1 of 4 user profiles on my computer. It gives me a message saying;"The User Profile Service service, failed the logon.User profile cannot be loaded."
So a new box recently built, when booted, defaults to the local administrator account.This is a Windows 7 machine for a Linux guru that doesn't want to be bothered pressing more buttons than is necessary, if you get my drift. So my question is, after pressing Ctrl+Alt+Del...how do I dictate to Windows that the preferred used is "HisDomainAccount" on our company domain, as opposed to the local admin account?
I completed a new build with a 64 GB SSD intended for a fresh install of Win 7. Prior to build, backed up my HDs and completed a W.E.T. save. Two of the HDs are coming with me to the new build (including the partition with my old install of Win 7).During the NEW install of Windows 7 to my SSD, I used Sysprep and audit mode to change the default user and program data location, no issues.
I then started up W.E.T. to transfer my old user profile into the new one - this is where I'm having trouble.The size of the files I want to transfer is too big for the new SSD, and W.E.T. doesn't seem to recognize the fact that my user profiles are NOT located on the SSD, and it won't let me map drives etc, do anything.So, is there a way around this? Or, is the best way to boot the old Windows 7 install, run sysprep/audit to transfer user profiles to the SAME location as I have the profiles for my new install, then boot the new install and see if I can log in as my old self?
Due to needing to clean C drive and re-install Windows, I backed up just the user profiles to an external hard drive using the Windows 7 utility. I have restored the profiles using the same utility but the profile names and logo's do not appear on the welcome screen. I can see the files and folders in Explorer but I thought that the profiles would be automatically re-created. Have I missed something?
Incidentally, when I reloaded windows I created an Admin profile for setting everything up and did not use my actual profile name.
I have just upgraded from Vista where we had two user account profiles on the D partition, as I recall, Vista prompted me to set it up this way initially. I got used to using this method, as my single hdd is divided into two partitions, C for the OS and D for Data. I did a new clean install of Windows 7 into a C partition which is I think 100GB is size, and there is a D partition which is empty and is around 400GB.I have been reading how to move the user profiles to the D drive but it seems too confusing (at least more confusing than in Vista). So I thought about maybe using the library feature if that is what MS has intended it to be used for.But it looks like the C drive would still continue to be used for user data. IF that is so, what I am supposed to fill the D drive with, or how am I to fill itI would like to begin migrating my iTunes back from my external hdd, and want to be sure to put it in the right place, but with at least 45GB of media there alone, the C drive will quickly fill up.
I want to have separate profiles setup in Win 7 64 where by: Shows one login/user when the system locks and depending upon the password provided. system opens the appropriate, linked profile. Have searched forums, Google, etc...and have come up with nothing. If this is a piece of software or a Windows 7 I'll do whatever is required. Think about this if you're a programmer!!! I travel frequently and sometimes need the ball and chain to reboot the system or do something on the local machine but I don't need her snooping (things aren't so great at home). I already use LogMeIn and it works great but I believe in Belt and Suspenders. With something like this, you could give someone "your password" and not have to worry because it is a FRONT account.
User Profile - Change Default Location User Profiles - Create and Move During Windows 7 Installation I want to set my SSD as a boot drive and keep my documents (users) folders on the secondary HDD.The two methods above seems like they would both work for my purposes. Is this correct? And if so, then what is the difference between the two methods?
I came across this issue this morning on my home PC. I have a Windows 7 64-bit PC with three profiles, my wife's, mine, and my daughter's. Previously when someone tried to log in all three profiles would be displayed so each profile could be selected. However this morning instead of seeing the three profiles I see two options: the active profile and a button that says other users. I select other users and I can log on to any profile so nothing appears to be missing. If I power the system down, when it comes back up I see the last profile logged on and the other users option.
Is there a way I can revert to the Vista style of listing in Documents and other folders? I find the Win 7 set up too spaced out for easy reading. A straight printed list is far quicker to read through. Somewhere I seem to recall that I could change to Classic View but was that only for Vista? [code]
I have windows 7 booting from a ssd drive. I moved the user profile folders to another drive to try to reduce the data files filling up the ssd drive. Well - the drive died. I have all the that backed up on another drive, but I can't start windows because it can't find any of the user profiles.
I'm about to do a destructive install to Win 7 64bit, to upgrade my existing Win 7 32bit installation. I already have a partition in my hard disk ( K: ) where existing User profiles/data are stored. Luckily there is only my profile and one for a guest user. I've read through some of the Tutorials on this site on how to create new users on a different drive/partition at the point of installing Win 7, and I've read how to change the User Folder Name of a profile.The fear I have is that the newname user in the 64bit will obliterate the oldname at the point of being used for the first time.
I had a Vista computer that crashed. It wouldn't start up. Figured I would try to install Windows 7 on top of the Vista installation. I read that a custom installation would save the old contents in and Windows.old folder, including the user profiles. However, after custom installation the windows.old folder is there, but my Vista profile is gone. Probably because it was password protected. I figured I would be able to find it and elevate my privelegies in Win 7, but seems not. It still seems the harddrive is full of my old information(alot of GB's are used). Is there any way to recover the information? I know the old password and all that, just can't find the information. (Also tried to search for exact file and folder names but they cannot be found).
I use my laptop for general use but also for processor intensive home studio audio recording. Rather than disable wirless, anti-virus software and a bunch of other things that can help me reduce processor drain each and every time I use it for music, I'd love to be able to have a different profile or maybe user account so that when I start up and choose that user/profile, wireless will automatically be disabled, most non-essential software (such as anti virus since I am not online) will not be run, etc.
I created a second user that I intended to use for the music related work. However, when I look at the hidden startup folder associated with either user, I see nothing (I have chosen to view hidden folders and files). If I run msconfig, I see many programs on the startup list. Amongst those are is antivirus software. It appears that when I deselect any program, it will not run regardless of which user I log in as, so it must be some sort of global setting. I still want most programs to run when I log in to use the laptop for general use (e.g. when I surf the web, I want the antivirus software to be active), so making such a global change does not seem to help me.My question is, can I somehow make these programs run only when I log in as a certain user? If not, is there another possible solution that would allow me to achieve the goals described above?Also, is there a way to selectively activate/deactivate wireless depending on which user I log in as?
I just upgraded to Windows 7 and was going through a process of organizing the "libraries" and I noticed (possibly of my own doing but am not sure) that the second drive in my system (B) was sitting there in my user folder. My question is, is that normal? How did it get there and how do I correct it if it isn't suppose to be there.
I'm having here is that my user accounts have sort of switched themselves. To clarify, my Administrator account had a password, my other user account did not. I woke up to find that the Administrator account no longer had a password, and the user account was now passworded with the administrator's! Now I can assure you that nobody is playing a practical joke, because I am the ONLY person who knows the Administrator password, therefore there is no way anyone else could set that exact password for the user account.
I have only one account on my windows 7, and today when i tried to resume windows, i accidently clicked on "switch user" instead of clicking on the user name. Now when i try to turn on my computer, the whole process of turning on Windows repeats all the time but it doesn't want to go to my account.
I have Windows 7 Professional x64. There are three user accounts: Daddy - Administrator...this is my account; Child - Standard User; and Visitor - Standard User. (These are not the accounts' real names.)
I really should be a Standard User for day-to-day computing. There are two ways I could go about doing this, and my question is: Which way is better? Daddy will continue to be an Administrator. I will create a new Standard User account for myself. Daddy will transfer all my documents, pictures, music, etc. to my new user account; or I will create a new Administrator account and then demote Daddy to a Standard User. Are there particular pros and cons to these methods, or does it not really matter?
One thing I wonder about is that I have used the Daddy account to install certain software 'for this user only' (i.e., Daddy) . I did this for software that needs Administrator permissions and rights, such as my antivirus software. Will a new Administrator account automatically have this software installed, or will it have to re-install this software?
doing a domain change over and all the client machines are windows 7 and we are moving them from a server 2003 domain to 2011 domain. i have been testing this on some dummy profiles on my laptop which is attached to the new server domain and normally to make a profile change over easier you could "hack" the registery keys by changing the profile target inside the key.in win xp for example i would have gone to regedit key_local_machinesoftwaremicrosoftwindowsntcurrentversionprofilelistand then copied the original domain profilefor example: profile a's (old domain) profileimagepath key data would be copied to profile b's (the new domain)but now in windows 7 there is of course the added security etc. so its not that simple, because when i do attempt to login to that profile after a full restart it will login to the temp profile and give the there was a problem and you have been given a temporary profile error.
I recently reinstalled Windows 7 Ultimate. After reinstalling and re-creating the user accounts I noticed that I could no longer use this PC as a host for Remote Desktop as I had before.
Also, I can no longer switch users, instead I have to Log off each time a user wants to log on. I have done the gpedit.msc (policies/templates "hide entry points for fast user switching" which is disabled.
I have also added a registry HideFastUserSwitching. These two tips are offered in a few places.
I have also deleted the original user accounts and remade them just in case there was a corruption. I keep all data in a data partition so I just point the newly created accounts back to that partition. Could that have something wrong with it?
Windows 7 Ultimate, 32 bit. Not on a domain. After I installed SP1, "Switch User" disappeared as an option. "Hide entry points for Fast User Switching" in GP Editor is set to Not Configured.
I also checked the Application Information service as Andre suggested, and it was not running. I started it, set it to automatic startup, and rebooted. Still no joy.
I have uninstalled SP1, and I now have the option to switch users as I did before installing SP1.
I'd prefer to keep my system updated, but for this system anyway, the ability to switch users as opposed to logging off is more important.
Box: HP-Pavilion OS: Win 7 Home Basic Ver. 6.1.7600 32Bit BIOS: American Megatrends 5.11 Sound: Realtek High Definition Audio Modem: HUAWEI Mobile Connect - 3G Modem CPU: Pentium(R) Dual-Core CPU E6500 @ 2.93GHz, 2936 Mhz
I am trying to find out how to keep my Broadband connection active when I switch users. I have 4 accts. on my computer, one for each family member. Whenever I switch accts, my Broadband connection shuts down. You can start it up again after the switch with no problem. I would prefer, however, to have it stay connected during the switch, as this would just make my life easier. For instance all users connect to the same torrent software, and I have the files for it synced. So, no matter who is logged in, the torrent info is the same. When the connection drops, the torrent software has to reload all the DHT info. I have googled this, to no avail. I assume it is a matter of where the BB Modem Drivers are installed? Or maybe a Registry tweak.
Is there a way that i can prevent the computer from turning off the screen while switching user? My screen reacts really slow when it gets turned off, then on again by the computer, so its just turns black for ages.
The issue is that my screen will go dim after switching users or switching users and switching back, its not a set pastern and doesn't happen every time. so i havnt been able to reproduce the issue, however i have had it happen to more then one of my computers and on more then one installation of windows 7 (and windows 2008R2 in one instance).uling out basicly any hardware issue is that my cursor always remains bright and sometimes switching/logout/login will resolve the issue on one account or the other account (no patern)Decreasing the chances of a driver issue is that i have had this problem on 2 systems with different brand graphics over the course of 2 and 3 windows installations respectively all with multiple driver updates and re installations.
Ruling out a connection to UAC is that i have UAC totaly disabled on both machines Heres the rub, i might be doing this to myself... but i cant just except that.instead of having my screen lock after a certain time frame, i use a special screen saver that 'runs a program'. the program ive chosen is "tsdiscon.exe", the executable used to invoke a 'switch user'.when theses 2 computers are left unattended i need the next user to see the user selection screen, ive had too many issues with people not knowing to hit the "switch user" button on the lock screen.ive found all sorts of people having this issue (dim screen bright cursor), but many seem to be dead ends or fixes that only fix the symptoms like the one show here display - Why does my screen dim on a desktop installation of Windows 7? - Super UserIn that case someone suggested forcing the graphics card to use its own color/brightness profile instead of the systems, i tried this and it does seem to work but i want to know why the system profile is screwed up.
This is a very useful graphic viewing program, no longer in production, but which works fine under Windows 7. The problem is that setting it up requires the program to write some things to the registry, which apparently is being blocked, so I have to go through the settings every time I load it. In Vista I could make the settings permanent by switching User controls off while I set the program up. With Windows 7 I find that even with it set to minimum, Ember can't write the values.
I have a batch file that I used on XP to run an MMC that I created for common management tasks. In the MMC I have the ability to run regedit as a root forest domain privileged user (for remote system registry editing), password resets (using AD) remote computer management, and several web links for common sites the team uses. I did this so it was all in one place and it worked awesome in Win XP. When I run the batch file it reports that the directory could not be found.[CODE]
I have verified that runas is in the same place as in XP, as well as MMC. I have run the batch file with elevate access as well as run the command prompt with elevated access (in fact that was copied from an elevated command prompt). The account I'm running it on has admin rights on the box, though UAC is set, I own both the account this was run from and the "root forest" privileged account, this account is NOT a domain admin.This is all being done on Win 7 Pro in a large enterprise domain environmentthis batch file worked and still works on Win XP in the same environment.
I have just done a clean install of Win 7 Pro 64. I have set up four accounts and for each one I have moved the user folders to a separate hard drive by using the Right Click Properties > Location > Move. I have done this for the following folders:
- Desktop - Downloads - My Documents - Favorites - Links - My Music - My Pictures - Videos
I have done it exactly the same way on each account (and more than once! I've been imaging the disk and have restored backwards a few times.)
The problem is, on three of the accounts, when I move the My Music, My Pictures, and Videos then they do move correctly but three rogue folders appear named Music, Pictures and Videos. And I can't delete then since they are system folders.
But the weird thing is that this does not happen on one of the accounts!
how to get rid of the extra folders as they're cluttering up the users home folder and causing confusion.
