Superfetch will not start. Says can't find file. One member had an answer about an IO program causing a hiding of a file so that was the reason. I would like to know what that IO program was so I can delete it and see if it works for me.
View 2 Replies
I have windows 7 working slowly, apparently superfetch needs startingbut when I try get message " Error 2 The suystem cannot find the file specified"
View 4 Replies View Relatedhow do i start superfetch in win 7 ultimate it is not working and computer loads slowly
View 1 Replies View RelatedShould I disable Superfetch if I have a solid state disk (SSD)?
View 6 Replies View RelatedI bought a new computer about 7 months ago and it ran very well. I was extremely happy with it. Especially how quickly it would boot up. I eventually noticed, however, that the start up of my pc was getting extremely slow. I opened the event viewer and noticed that at the time of my computers startup, the superfetch service wouldnt be able to start. It said: The Superfetch service terminated with the following error: The system cannot find the file specified. After doing quite a bit of research, i ran a hdd integrity test through the command prompt, emptied the prefetch cache. and even upgraded and re-installed the operating system. The service superfetch still fails to start. Occasionally, it did however start after i emptied the prefetch cache and my computer instantly, started up very fast. Like new again. But the next time i booted up my pc, it failed to start again. I want the service to be reliable and start every time.
View 2 Replies View Relatedtrying to get superfetch-readyboost to work with no luck. Decided to use my back up disk i created, how do i get the comp. to run the disk ? Dell, 4010, Windows 7 home premium..
View 1 Replies View Relatedsuper fetch not working
View 2 Replies View RelatedMy computer freezes when streaming and I maybe because the superfetch is off, this is the only error message I am getting.
View 2 Replies View RelatedHow can I start Superfetch in Windows 7
View 2 Replies View RelatedSo ive been getting the black screen with movable cursor lately and have tried many a methods to remove it i tried checking in my event log for something, and this is waht it said "The following boot-start or system-start driver(s) failed to load:dtsoftbus01" So what does this mean and how can i fix this?
View 4 Replies View RelatedMonday couldn't boot up PC, had to go to system recovery and restore to previous day.
Log files show below that 4 things failed to load. Tuesday couldn't boot up PC again.. tried to restart like 4-5 times.. Finally comes up and in the logs there's numerous things that failed to load. Running a sfc /scannow right now.
I found corrupted system files, but it appears that the hard disk is fine. executed chkdsk and no bad sectors.Just looked into this on event viewer-The following boot-start or system-start driver(s) failed to load:xsoaynmfmfxpefxbozedltnzvijcvI am running Acer Aspire X3950-U3022 with Windows 7 Home Premium Home Edition.
View 4 Replies View RelatedI'm not sure where to even begin to fix these problems. Some online searches suggested doing a system repair but I want to get some more feedback here before proceeding.Here is the message from the event log:The following boot-start or system-start driver(s) failed to load:
AFD
cmdGuard
cmdHlp
CSC
DfsC
discache
ElbyCDIO
[code]...
I realized some of these are not Windows 7 related but most are. While the computer "works", I do experience frequent reboots and freezes. Perhaps some of these driver loading failures are part of the cause of my issues.
When i got home today didn't my computer work, my girlfriend has been the last one using it. So don't know how things were just before the shutdown or anything.when i turn on the computer i get to the screen where "touch bios" is and where i can see the options like Bios settings, boot menu, xpress recovery.but i cant press anything, and after about two seconds on that screen the PC shuts down again.The keyword lights up so there is a responds on it, but just doesn't work to press anything before it shuts down.I've got BSOD upto several times a day for a few months time.believe that my computer is affected by some virus or something is delaying my computer. might be an combination of several things.I got no external things hugged up to the stationeer computer right now.it is a windows 7 x64 machine.
usually when i get issues i can access advanced boot up or bios, but can neither in this case..I wonder if it might be a hardware issue.
When I start up my computer, my Steam starts up, then I manually start Chrome. Chrome comes up fine, Steam does too, but when I try to right click on Steam and click friends, all it does is create another steam process running at 100-108 K. Then if I close Chrome and try to reopen it, it will do the same. This happens with EVERY program after I start up. There's a 5 second window where I can open programs without issue, then after that it will only start 108 K copies of them. It takes me around 30 restarts just to get it working properly, if not more.
View 14 Replies View RelatedI have a video card that used to boot up in windows 7 - but know this computer with a GeForce 9500GT video card boots up with the Vista boot up logo.I found out this was the video card because I have another card with another GeForce video.I took the swapped the video cards, and the indication changed. The original computer booted with the windows start up screen. And the test computer booted up with the vista boot up screen.
I was told by a local computer repair facility this had something to do with video drivers.I tried what the organization suggested and uninstalled all video drivers (I used generic Windows 7 Video Drivers).Then the organization recommended downloading the latest video drivers for the GeForce 9500GT.This video card has 512GBytes of memory. I did this.Then I was told to install the newly downloaded video drivers.I resrted the computer with the Vista login screen with windows 7 operating system,and the vista login screen was displayed.
Last night I was on my computer and then I shut it down. Today when I came home from work it keeps saying windows failed to start. I tried hitting f8 and loading to the last good configuration doesn't work, safe mode same thing, repairing nothing, so my last resort was my windows 7 cd. So I went into bios and made my configuration boot from cd/dvd popped it in and restarted, a black screen came up saying windows is loading files, then the windows 7 menu came up, picked my language, next, and first I tried repair my computer, I get the little circle meaning its loading for like 5 seconds them it does nothing, rebooted again but this time I chose, install and I've been on the setup is starting for like 20 min. And forgot to mention, when it boots seem like it does good then comes to the screen where it says windows failed and gives me two options repair our start normal, if I pick repair it just reboots and start normal takes me to like the pick your user screen but its just blank no users, so I can't even restore our access the computer.
View 3 Replies View Related1. Which DLL uses W7/64 for the sound at start-up of Windows? I would like to edit it for my own sound.
2. How can I alter the sequence of the entries in the Start-menu? Now the sequence is in sequence of creation, I would like to group them by application-area.
F keys will not work either! I don't think I have a disc to restore from, what else can I do?
View 4 Replies View RelatedI have an error that system32/hall.DLL is missing so I put in my windows 7 DVD ( I Have 4 DVDs for my windows, gateway, I always put the first one) so I could start start-up repair but when the windows files is loaded it keeps starting recovery mangment which gives me options to recover my hard drive to factory defaults (ie delete files on c and reinstall windows) ,why I don't get options to choose startup repair, how can I get it to start start-up repair?
View 3 Replies View RelatedMy laptop freezes when i turn it on after a minute or two just enough time to maybe sign in but i can go into safe mode and it wont freeze but you cant do anything in safe mode that
View 1 Replies View RelatedMy dell n5030 laptop isnt getting past the windows start up screen. It boots up fine up to the part where the four balls become the windows logo, but then freezes there everytime. When i try to select the windows start up repair it blacks out the screen and I cant do anything.
I know its not a faulty hard drive because its newly fitted and this problem occured previously on a different hard drive aswell.
using windows 7, have a blue screen at start up issue, memory dump. Sadly the PC wont start so unable to try too much, it lets you select user, attempts to ,log onto the user then just goes to mthe blue screen and starts the cycle again. It will not start in safe mode either, basically the same result although sometimes it loads and you are in but when you try to do anything it goes to the blue screen again. I did get the error code (not always the same on the blue screen but this one comes up most time), "driver IRQL not less or equal"
View 2 Replies View RelatedThe problem that i am facing is that, my windows 7 search is instantaneous but when i click on the application the application takes time to load but if i run the same application from Desktop it will load immediately. This happens only one first time after bootup.
View 9 Replies View RelatedI have Windows Ultimate (x64).I use the Asus Suite II supplied with my Asus Asus P8Z68-V Pro Gen3 Motherboard (which I like for fan and temperature monitoring) Ai Suite II always loads BUT "on screen" it is messy during loading because a seemingly AI Suite bar sized white artefact appears top left of screen for 10- 20 seconds before disappearing when the AI suite icon appears in the notification tray. Sometimes a white square also appears temporarily.I have noted that if I exit Ai Suite II and reload via the Asus AI suite supplied Shortcut I never get these artefacts AND the suite loads instantaneously (I note however Asus uses AI Suite II.exe via the shortcut but via the Asus installed Task Schedule it open via "AsRoutineController.exe -open"I have also tried unloading AI Suite II and AsRoutineController.exe and loading AsRoutineController.exe and it too loads cleanly and almost instantaneously.
1) Why does Asus use the Task scheduler instead of loading via the normal Windows Startup procedures?
2) Could it be so each can be easily disabled if required) and is that the ONLY reason?
3) what is the -open switch in the command line?
4) Is there ANY good reason why I should not disable the AI Suite II in the Task Scheduler and add it the the Normal Windows Startup applications I use the Free version of Startup Delayer as it has served me wonderfully with my current Win 7 O/S (and my previous XP) in ensuring all desired Notification Tray Icons display EVERY time).
Today I PROVISIONALLY made the change and AI Suite II opens cleanly (as other Startup apps) without temporary white artefacts and with no noted side effects so far. I am nervous however, to make it permanent without advice from knowledgeable Seven Forums members on this subject
I have an Acer Aspire M5811 running Windows 7 - 64 bit. When I tried to start my pc tonight I ended up with just the desktop wallpaper with no icons or start menu.
I tried to reboot in safe mode but the pc became unresponsive. I also tried using the system restore disc but again nothing.
Yesterday, the task bar and Start button mysteriously disappeared.I've also found that the "Taskbar and Start Menu Properties" windowdoesn't come up. There are two places to click on in Control Panelthat should bring up this window, but it doesn't. The Control Panelborder changes color as if something is starting to happen, but thennothing happens, possibly indicating that some program starts to runbut then finds something wrong and exits. I didn't see anythinginteresting in the error logs. The desktop icons appear normally.The problem exists only when logging onto my son's account. When Ilog on as administrator, the task bar and Start button appearnormally.The usual tricks don't work: Ctrl+ESC, or bringing up Task Manager andtrying to rerun explorer.exe. I tried sfc to check for corruptedfiles, but none turned up. I ran an AVG scan and it did find one fileit considered a threat, which it removed, but that didn't solve theproblem.
I found a web site that referred to the registrykeyHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorerwhich has a NoSetTaskbar value that can be used to disable the"Taskbar and Start Menu Properties" window. On the administratorlogin, the Explorer subkey is there all right, but doesn't haveNoSetTaskbar. (It does have NoDriveTypeAutoRun.) But when I log ontomy son's account, the Policies key had no subkeys at all. I triedadding an Explorer subkey without adding any values, but this didn'tsolve the problem. I haven't yet tried adding a NoDriveTypeAutoRunvalue, but since this seems to pertain to AutoPlay it didn't seemrelevant to this problem.Any thoughts as to what might be going on or what might fix it?
i cant start my laptop in normal mode. when i start in normal ,mode i stuck in black screen only the mouse pointer is appear, when i wait it reboot again but still i get stuck in black screen
View 1 Replies View RelatedHow to Pin Libraries to Search and See More Results in Start Menu ?
View 0 Replies View RelatedHow to Pin Search Connectors to Search and See More Results in Start Menu ?
View 0 Replies View RelatedI can't figure out for the life of me how to get my Diagnostic Policy Service to come back on. not sure what to do and i've been lost for the last month trying to figure out what to do without having to re-format
View 3 Replies View Related
