As I was unable to find any solution to my laptop sound problems (here)I'm going to try reset it. I don't know if that'll make a difference but willing to try. I've never had to do that before so I'm a little apprehensive.
My laptop came with win 7 x64 already loaded, but had a huge(334G)D: partition on it. That seems to be what is preventing me from making the disk set. At least that is what the error message says.DO I need to just scroll the forums, and delete and then find that 334 space?
I have an HP laptop (model HP G56 Notebook PC) that I am having a manner of problems with. There's definitely something wrong with it, but virus scanners are not picking it up.So I've decided to just reformat it and start from scratch (I've been planning on doing it for a while anyway). The problem is, the "Restore to factory settings" doesn't work properly. I go through the steps, backup etc then it says I need to restart for the process to start (which has worked fine before). The problem is that when the system restarts, the computer just sits at a black screen. Nothing happens, I've tried leaving it for ages but eventually I'm left with no choice but to switch the powerbutton off and then it starts up as normal.I've also tried going directly from the boot-up screen and selecting system restore that way, but again it just takes me to a blank screen until I hit the power button. It's like it's impossible for me to reset the computer.
Just wondering if it is wise to restore to factory settings (computer is little over 3 years old). Reason is I installed a lot of programs over the years and just want to clear all unwanted files etc. Also my recovery drive is highlited in red.
I have an Acer Aspire 2520-BZ873 and need to restore it to factory conditions. I have no windows installation disc and no money to purchase it. When i start the process and it restarts the laptop a black screen saying "Cant process boot selection because a device is inaccessible" What can i do to fix this?I cant even restore it in safe mode. Im not all technical and dont understand much about laptops.
I am trying to fix a Toshiba laptop that failed during a factory restore by the customer and would not complete the restore. I have since tested the ram and hard drive and they are ok. I replaced the faulty cd drive too. The factory restore worked this time, but I keep getting a blue screen during the 'Checking System Performance' stage of the recovery. Windows is installed and all drivers are in as I can see in safe mode but if I try to boot to normal Windows I get the BSOD boot loop and don't know how to bypass it. I have attached a html file of the crash reports from BlueScreenView. The problem appears to be with the ATI display driver, but I am not sure how to update it in safe mode.
I have done a 2nd factory restore because some issues but now I need to do a 3rd factory restore because the laptop has too many applications installed and I prefer to restore it to original settings. I want to know if I have done 3 or more factory restores can this damage/harm laptop.
it has no recovery ability, the downloaded utility HP recommends keep telling me I am missing .dll files and other errors. can't make backup discs because the utility is not on the computer and the downloaded utility is not doing the job. how to contact HP with no success.
My hard drive crashed recently. I'm using an HP notebook, I'm not entirely sure what the model is and all that, I'm not too computer savvy. Anyway, my hard drive crashed today, I'm not sure why. My computer fails every start-up test and will not load any diagnostics or restore menus. Is there a way I can make my computer get to the Windows restore menu to completely reset my laptop?
how can i restore my acer computer (aspire 5710) which was originaly vista but i upgraded to windows 7 how can i restore to factory settings with windows 7
My son put my 4G aircard from my Apple into the USB port in his Acer. It wouldn't work, so he just pulled it out without going through the eject function. Now when his Acer is turned on it won't sign on at all. It goes to a black and white screed for Windows Boot Manager and says it is an error cause by unplugging the USB drive while the device was in use. If you push enter, it goes to the Windows Error Recovery black & white screen. No matter what you do, it just goes back & forth between those two screens. I can't even get to a Windows screen to to any recovery program.
For my dell 1564...i I am looking to restore it. I read previous posts. I get to "system recovery options" and tried the first 3 options for restore/ repair, but nothing..its all restore to previous point, which apparently I dont have even though I made them, and dell cds dont seem to want to load up, in safe mode, reg, hitting f12, f2, f8, ctrl f11 and so on..
my son forgot his password for his laptop. He has an Acer with Windows 7.how to restore the computer to factory settings? I was told that is what we needed to do in order to log back on.
the opening screen comes on that reads acer and then gose to a diffrent screen thats blue then black screen and reads the following no bootable device -- insert boot disk and press any key
i have a blue screen when i reboot and it keeps rebooting, i did manage to see a crash dump in the message in blue box. it doesnt stay up long enough. i want to take it back to factory, but it keeps rebooting. i can go to safe mode but dont know how to take it back to factory from safe mode. i dont have any cd's it didnt come with any.
Do I need the windows product key even though the laptop was preinstalled? Basically the product key has a few numbers and letters missing from the back of the laptop and there seem to no way to retrieve it.
I have a ASUS laptop which crashed after AVG installation. Did everythying (changed the AVG folder name etc). Now stops at CLASSPNP.SYS in safe mode. Also cant go to Repair ( get message "Windows is Loading Files") and nothing happens....
I dont mind formating and doing complete reset to Factory settings. (I have copied all data). However, I dont have CD for restoring Windows. F9 does not work.
Through midnight manager I can see the folder WindowsImageBackup on my D drive (80GB). Can I use this one (how?)
My notebook (HP Envy 14) had been attacked by malware, and after eventually destroying the virus, I've realized that the system files/programs were severely damaged. For instance, when I attempt to open Internet Explorer or Firefox, a window appears, asking me to browse for a program to open the "unrecognized" Internet Explorer with... and this process applies to most of my programs, such as Microsoft Word (in order to open Word, I must indirectly open a word file document, it's impossible to simply click on Word from the start menu). So, that's why I decided to return my notebook to its original state, using the System Restore factory option. However, when I attempt to run system restore (after saving all of my important files onto an external hard disk), an error message comes up: "Error: Recovery Manager cannot run from the hard drive. Recovery Manager must be run using recovery media to perform a Factory Reset." What exactly is "recovery media" and why is this message appearing?
Having a little trouble restoring my computer to factory settings. I dont know why but I cant seem to just do it through the advanced menu because it says i dont have a restore point. Does anyone else know how to Restore my computer totally without having to buy a new operating system, Or even Just using a old one.
My problem is with my hp laptop running windows vista. laptop is hp pavilion dv6225us. OS was upgraded to windows 7 ultimate. was getting messages saying this version of windows 7 was not genuine so i tried to restore my laptop to factory settings. this failed. do not recovery disc; could not get recovery manager by pressing f11 at boot up. now at boot up i receive this message 'remove discs or media; press any key to restart. pressing any key nothing happens. how can i get to recovery partition to restore to factory settings.