I reinstalled Windows 7 and the screen on the computer has started to dim slightly then will brighten back up.
I have set the power functions to not go into energy conservation mode. I wonder if I am missing a driver or something.
I have the computer hooked to external monitors but they are not affected. Just the screen on the laptop itself. What could be causing the screen to dim on it's own?
I am using a windows 7 Acer laptop, and the screen only brightens when I plug in the charger. Also, the battery gets used up too quickly, even though I have the computer on 'power saver.' Downloading Bios or a brightness control won't work. The lever goes up and down easily when I bring up the 'adjust screen brightness' screen in the utility folder, but the screen stays dark. On top of that, the lever refuses to budge when I bring it up from the taskbar.
View 3 Replies View RelatedI have a gateway netbook. Normally when it is plugged in and I unplug it the screen dims. Yesterday it stopped doing that. Now when I unplug it stays at the same brightness. Just to clarify, it seems as though whether it is plugged in or not, the brightness is like it used to be when I unplugged it (it is dimmed either way). It's not that important because the thing stays plugged in most of the time, but I am curious as to how this could happen. I just reinstalled Windows on it a few days ago. It is 32-bit ultimate, if that matters.
View 1 Replies View RelatedI have a brand new dm3t series laptop. There are two issues that I'm having with the laptop that no one can seem to figure out. I literally had an HP tech remote access my laptop and spend an hour trying to figure out what was wrong.
I have tried system restore, recovery, re installation of drivers and really everything else they've asked me to do. I turn to the forum to see if anyone is can help, thanks much.
1) First issue is very annoying. When I awake my computer from sleep the mouse is very sluggish and doesn't hardly respond to the track pad. Furthermore, the mouse is a magnify glass and when I do try to move the mouse via track pad it just zooms in and out. Oddly enough, after a few minutes of sitting there the mouse starts to work again. It's almost like the mouse has to warm up. It is very frustrating.
2) Second issue is the display on battery power. When on battery power the screen CONSTANTLY is dimming and brightening itself. For instance as I'm typing this thread the screen is brightening and dimming for no apparant reason. I'm not sure why and i'm sure it is wasting my battery. I've tried all sorts of power management tips/ticks and still nothing.
Any help would be appreciated, should I just return it? What can I do?
After I had to reinstall my Windows 7 OS and the Samsung drivers onto a new internal hard drive, my screen images appear to be somewhat stretched sideways from normal. I right-clicked the desktop screen and was given only two screen resolutions to pick from, thinking perhaps was the problem, but neither option changed my problem.
View 5 Replies View RelatedI have a Elitebook HP 8530p, and it has a issue with the screen brightness. When put 100% (energy properties are at : high profile) the screen dims, but the % remains 100, however when manually setting to a lower then to max again the screen is bright (as it should be) This happens while i'm activly using the computer. (mouse/ keyboard interaction)I disabled every possible auto-dim feature I found. This happens at random moments but every 1-5 min it happens.
View 7 Replies View RelatedI bought a brand new Samsung QX411 two months ago. It's a great computer. Problem is, it got hit with a nasty virus that was pretty much completely debilitating, so I took it in to Best Buy (mistake), and they told me the best thing would be just reinstall Windows 7, and everything would be great. Well, I did, and now I am stuck. I reinstalled, but I did not realize that literally nothing would be in place. I am not completely naive: I did save all of my important files, folders, music, etc. So it's not that I have lost my data and am now crying "woe is me." Instead, I have basically a blank Windows 7 and nothing is there. I can't connect to the internet, because it is telling me that I don't have the necessary hardware (I know I do, but still). A basic summary would be this: I have no idea what to do after properly installing Windows 7. I want to get it as close back to normal as I can, but I don't know how to start.
View 5 Replies View RelatedI recently built a new computer system that contains my old HDD, which I transferred from my previous PC. The old copy of Windows 7 that was already installed didn't work in the new PC, as expected. Instead, I have a new copy of Windows 7 available that I need to get on the HDD. But I also need to deal with the old Windows copy. I've already transferred all of my personal files from the old copy onto a portable HDD for safe keeping. What I plan on doing is reinstalling the new copy of Windows 7 onto the PC's HDD to be used in the new computer. I was able to acquire the new Windows 7 version for a really cheap price from my college.
So now I either have to format my HDD so that the new Windows 7 can work properly while keeping the old/useless version out of the way, or wipe the old Windows 7 from the HDD completely. Should I keep the old Windows 7 on the HDD and just never use it, or would that conflict too much with the partition used by the new version? If they do conflict, how should I go about removing the old Windows 7 partition? dealing with the HDD and OS seems to be one of the most annoying parts of a PC.
I have bought a Lenovo Ideapad about 6 month ago with Windows 7 Home Premium.I now want to Re-Install Windows and delete my whole data. In Short, I want it to be Completely Clean.I Dont have My Windows CD to do That, But I have a Key Below My laptop and its Genuine.
View 3 Replies View RelatedI mistakenly purchased a 32 bit version of windows 7 pro which was on OEM. Now I am going to purchase the 64 bit version OEM software again and format my hard drive and reinstall the 64 bit OS on my PC.
My question is now that I will be using the 64 Bit version, can I re-use my 32 bit OEM on a completely different PC as it will no longer be installed on my PC?
If so do I have to uninstall it first or will a simple wipe off the hard drive deactivate the 32 bit key? Also is there a cheaper option to purchasing the OEM software again, such as upgrading from 32bit to 64bit?
I've recently purchased an SSD and would like to utilize it as a boot drive. I am happy with my configuration and would like just to install Windows 7 on the SSD and use it to boot -- with all other hardware and drives remaining without change.
View 6 Replies View RelatedSo I've been using my new laptop recently and discovered its hybrid hard drive contains an SSD. And boots up windows in seconds. This has caused me to want to buy an SSD for my desktop (my real gaming machine). The trouble lies within reinstalling windows and backing up.My desktop currently has two hard drives. Both 1tb each, one is full. And the other is barely used up. If I were to buy an SSD for my desktop. Would it be possible to reinstall windows (OEM) onto my new SSD? How would I do this? Also I've never backed up before (terrible I know and I want to start now!). However my family does own a 1tb external HDD. How much of my 1.2tb of data could I backup, and how would I do it? I've got loads of games and whatnot installed I don't want to lose.
View 9 Replies View RelatedI'm currently running windows 7 64 bit on my current system. I am just after buying a new pc and want to install my OS on my new SSD. I'm going to keep the old raptor HDD for my new system also (the raptor HDD currently has the OS on it)
1. Can I install windows to my SSD using the same product key yes?
2. How can I/whats the best way to completely remove the OS from the raptor HDD and just use it as a storage device..I want to use the 120GB SSD for the OS & some of my games - (Origin & Steam)
I just installed and activated OEM Win 7 on an HDD. Changed my mind and want to purchase an SSD, place Win on that, and use my HDD for everything else. Will I still be able to install Win or am I too late because I activated it?
View 4 Replies View RelatedI'm not sure this is the right forum for this question, but then again: lots of people seem to have comparable problems, so here goes:As my 3-year old netbook was getting very slow, I decided to get rid of all the junk at once by completely reinstalling the OS (Win7 starter). Now, there is a very easy way to this with the Recovery Manager (as described in the support papers on the HP site), but that didn't work for me. This may wll be due to a faulty HD; I've no way of testing it as my C: drive is now reformatted. So what next?I was not completely unprepared; earlier I made:- a USB-stick with the 'HP USB Recovery Flash Disk Utility' (HP45774). The stick does contain, I think, all or almost all of the contents of the recovery partition. (NB: you need a 16Gb stick and this is a trick you can do only once.
- a recovery CD on an external CD drive, although without a 'disk-image' as by then the system had grown much too bloated already. (should have done that straight away after I'd bought it, although I'm a bit at a loss as to what storage medium would be used).These two means should surely be enough to restore the thing to factory settings? However:- The memory stick should be bootable, but isn't.- Booting from CD works, but the Recovery Manager can't seem to access the diskimage on the usb-stick. (Although, when I call up a command prompt, one of the other options, it is readily available.)So I don't really know what to do now. I'm thinking of two options:1. In one forum thread it was said that the stick thus made 'often' or even 'usually' isn't bootable, as it should be. The advice was to make it bootable, using EasyBCD. That's easier said then done, I found; no luck so far.
The stick does contain a boot directory, bootmgr etc.; it clearly is supposed to be bootable.)2. Following the advice in other threads, I downloaded the whole 1.7Gb WAIK, just to get hold of imagex.exe, which i then put on the memory stick. As the bootable 'recovery CD' does provide a command prompt, I could, supposedly, 'apply' the image base.wim, which is also on the stick, to 'drive D:' (under these circumstances, that's the main partition). But as there's lots of other stuff on the stick (like FactoryUpdates), I'm afraid it will be a lot of hassle installing computer-specific drivers and stuff.
I want to buy a new laptop. The problem is that new laptops come with a tonne of crap on them and I want a clean install of Win7.What would I need to get this clean install?Would I need to *cough* acquire an OEM edition of Win7?
View 5 Replies View RelatedI installed Windows 7 on one of my computers. I have another computer running Vista. Can I uninstall Windows 7 on my first computer and then reinstall Windows 7 on my other computer?
View 6 Replies View RelatedI reinstalled Windows. When it was done, the internet disappeared! It says "Not connected - No connections are available". I try to troubleshoot it and it says to install a network adapter driver. My router is Linksys WRT54GS and my modem is ubee.
View 3 Replies View RelatedI had multiple BSOD's on my laptop, i had to reinistall windows 7 because it could not boot up. After reinstalling and adding all drivers I got another blue screen.Please find attached the dmp file.
View 2 Replies View RelatedI decided it was time to perform a clean installation. I just got my computer last year and I've never done it before. I have 2 hard drives, each 1 TB. My primary hard drive is partitioned. The first 882 GB is the Local Disk. It has everything on it, the OS, programs, data, etc. The other 48.8 GB has the Windows 8 pre-release installed on it. My secondary hard drive is used for backup. I use the default Windows backup program. I'm currently performing a backup and I plan on creating a system image after that. Once those finish, I'm going to partition my primary hard drive again for the new installation. How much space do I need to give Windows 7 on a partition?
I was also wondering what to do after reinstalling Windows. Do I restore from the system image? I thought reinstalling Windows then restoring would defeat the purpose, wouldn't it? Also, what do the backups and system images cover? Should I just manually copy my programs and data to the internal backup hard drive? I just that that moving programs from where they installed then moving them back might mess some things up. I read somewhere that it would be smart to reinstall all programs. I wouldn't mind doing that, but there's one that concerns me. I'm a PC gamer and I use Steam. My Steam folder is almost 200 GB, please tell me I wouldn't have to download all my my games again...
i reinstalled windows 7 64bit a few weeks and since then ive been having startup problems. BSOD, restart during welcome screen, freeze on starting windows screen etc.need to know if its a simple fix or should windows be reinstalled or is it a hardware issue?
View 9 Replies View RelatedWindows 7 Home Premium X64 keeps re-installing the same existing USB drivers every time I plug in an USB device. This means every time I plug in my Wireless mouse, my printer, scanner, external hard drive... and so on I have to wait minutes before I can start using the device. Also, it does not just re-install the drivers from the hard disk, it does a lengthy check via windows update before it installs anything.
View 7 Replies View RelatedUsed RT Seven Lite to slim down windows, but may have done a little too much in terms of removing Windows services (RasMan, etc.). Is there a way to reinstall the Windows components?I did try to manually create the services using sc create and trying to duplicate the service from another box, but so far it hasn't worked out that well
View 2 Replies View RelatedI am running Vista basic and Windows 7 ultimate on my pc and i was just wonder how can i reinstall Windows 7 while keeping vista and not changing anything on my C: drive ( which vista is in ) while just getting rid of Windows 7 and putting a new Windows 7 over that same hard drive ( hard drive D: ) . Is there any way of doing this and without causing any problems to vista, my pc and not having conflict's ?If so can you please tell me how to do it step by step?
View 9 Replies View RelatedI got windows 7 pro 64-bit though my school for only $30. It said it was only an upgrade. I also purchased the backup disc.BUT I downloaded the .ISO, wiped my drive, installed it, and it activated just fine, no errors.Now I just reinstalled it on a different hard drive, and its giving me the error that it is an upgrade only. This is using the same product key that worked before. I did this on another friend's new build and it gave the same error. I talked to a representative that said I should not have been able to install in the first place.I tried calling to activate, but when it gets to the product key, it will not recognize the numbers or letters when I try to type or say the key.I used the number 1-866-234-6020. I am getting nowhere on the phone.Can I get this product key activated for a full version anywhere? Any specific numbers I have to call?I have a disc of XP retail version lying around. Can I install that and upgrade using my backup disc
View 4 Replies View RelatedJust reinstalled Windows 7, walked away from the PC during the re-installation and it appears that a second partition was created in stead of overwriting the old partition. How can I start up the PC and delete the old OS? Or should I just re-install Windows 7 again and be at the PC when it goes through the steps?
View 7 Replies View RelatedRecently I decided to reinstall windows 7 without wiping my hard drive, but I ran into a problem. Everything was going smoothly until it reached the transferring data and settings. It went up to 72% and hasn't changed for an hour. If I try and close it down it simply says that it can leave the PC in an unstable state.Here is an image of what I'm seeing: and the number hasn't changed, and it is always changing from please wait to Transferring files imgur: the simple image sharer
Specs:
Windows 7 home Premium 64bit
6570 (amd radeon)
I5 2400
8gb of RAM
600W power supply (for future upgrades)
I'm Just the other day when i cut on my computer it wouldnt boot so i tried to restore it to a earlier time but it wouldnt work so i tried to restore to factory setting and it wouldnt do that either now i get a message telling me to restart installation cause windows couldnt be completed can someone please help. I have a ACER ASPIRE computer which windows was pre-installed and i have no disc. The disc i created dont work i put it n anotha computer and it said it was blank.
View 1 Replies View Relatedso i bought windows 7 right when it came out with the student discount, downloaded the installer, and did an upgrade from vista. now it seems that i have some registry problems and i backed all my important things onto an external so i could do a clean reinstall. but when i go to reinstall, it cant find the files it needs and asks for the install disk.
What can i do to do this clean reinstall?
I've already installed Windows 7 64bit Upgrade on my Vista laptop. But, I'll be returning the laptop to the manufacturer (HP) for some hardware issues and they may very well format the hard drive (or rather, restore it to its original factory condition) since that's what they've instructed me to do. They said they'd do it anyway if I haven't already.I'm concerned about reinstalling Windows 7 upgrade. Is there a process I need to go through before sending the laptop back so's to easen the flow of reinstalling it later on? Will there be any problems with reinstalling it (atop of course my original OS (Vista 64 bit))I recall years ago sending back another laptop to HP and pleading with them 'NOT' to format the drive since I knew for sure it was a hardware issue.
View 7 Replies View Relatedi have reinstalled my windows 7 x64 today, using a flash drive. once the installation was finished, i immediately proceeded to amd website to look for new drivers for my radeon hd5670. i installed them with ease in a few minutes, computer rebooted, and i was a happy camper... until i tried going on Internet, when i realized my monitor was giving off no sound. i never had any troubles with the sound, it always worked properly before the reinstallation. i have tried absolutely everything for the past 6 hours: i installed and reinstalled ccc, beta version of ccc, realtek amd hdmi, googled for hours, unplugged hdmi cables back in forth, and must have restarted about 50 times.
this is not the way i envisioned windows 7 reinstallation would be like. i wanted to start from a clean slate, instead i was given hemorrhoids. i know a lot of people have had these issues, and i tired following the steps they were given in other threads, but to no avail.
