Today i got a BSOD so i did an advanced recovery method now my network icon (those little 5 bars) in the system tray is gone.I went to my network & sharing center and it said "The dependency service or group failed to start" i cannot connect to the internet.
View 5 RepliesI have installed Windows 7 Manager from Yamicsoft, I made some changes and its removed the network and icon from my tray?? I didnt choose those option in the program, I have checked and the options to show tray icons is enabled - it is in Windows 7 too, I've also tried enabling the network icon through GPEDIT to no avail - also tried following some advice from microsoft website which involved deleting two reg entrys and reloading explorer.exe - still no joy. The network (wifi) still works. I did make a restore point before I ran W7M but would like to try and fix without restoring.
View 2 Replies View RelatedI got system error message: trayct.exepsystray.pyd is missing try reinstalling program
View 1 Replies View RelatedAll my icons are gone in my system tray. I'm using windows 7 SP1. I've tried registry fixes, restarting explorer, turning off PNP services, a system restore, etc., without success. The thing is that the icons reappear very briefly while I'm logging off and if for any reason the logging off is delayed while windows is trying to close programs and then I cancel the logging off, the icons manage to stay. But they disappear again in the next log-on. I'm trying to avoid a re-install ....
View 5 Replies View RelatedOn loading Win7 X64, all the system tray icons load, but there is no little square box that contains them.. They all sit on the task bar on the right corner beside the speaker icon as small icons as in the box for the tray.
View 5 Replies View RelatedI'm connected wirelessly with no connection issues, but the system tray icon is the one for a LAN connection with a red x on it and not the wireless icon. I noticed if I flip the switch to turn of the networking adapter it reverts to a wireless icon but of course with no connection.
View 10 Replies View RelatedI currently have the "window screen with the power plug."
I would like to change it to the Wi-fi icon (the three bars).
Windows did not show any network connections in the network connections window. I tried everything that I could find online but nothing worked. As a last resort I decided to reinstall the driver for my Intel 82566DC-2 Gigabit network connection. I uninstalled the old driver and then installed the latest drivers but now I get code 31 (cannot find the driver software) in device manager and the connection doesn't work.
View 5 Replies View RelatedI had some problems with some kind of trojan that disabled System Security. I found a tool, fixed this and now everything runs perfectly and 'safe' but now I have a Red X On Network Icon but it's working properly.
View 5 Replies View RelatedI have a Netgear WN111 USB wireless adaptor on my PC (802.11n NIC). It works fine with my WiFi network, but it always displays the wrong icon in the System Tray when connected. It shows the signal bars greyed out, with a yellow star on top. I have tried a Windows update on the driver, but Windows (7 ultimate) says it's using the latest driver.
Netgear only have a Vista driver for this NIC, tried this to no avail, same problem. I have no other NICs enabled on the box (wired Ethernet port disabled in BIOS and nothing in Device Manager). I have googled this issue and I'm not alone (and it's not just Netgear NICs affected). However all the solutions say remove & re-install the device. Done this, and it's made no difference.
I have strange problem with my windows 7 ultimate.
My network is okay and no problem on Internet and network from my 2 computer but:
1 - the icon in system tray show broken connection:
2 - in system hardware all network are okay
3 - in network preferences only 1 is present
i try to UN-install all the network, so windows recognized these at startup but nothing..
I have a peculiar issue where I would need to have "Network and Sharing Center" open to be able to see that my my laptop's wireless connection. I would see the signal bar and also see the dreaded red x.Even when I have it open, I can see it refreshing each second; like its losing connection and reestablishing.My internet connection is working and has no issues.
Network and Sharing Center - Open
Network and Sharing Center - Open and refreshed
Network and Sharing Center - Closed
I just bought a Dell notebook with Windows 7 installed. I had Vista installed in my other computer and so learning Windows 7 is a bit of a challenge. My current problem is, the desktop icon is missing from the (I think it is called) the systems tray. It's the "tray" at the bottom of the Window's screen. It was there when I first started Windows but soon after I noticed that it is missing. Is there any way to get the desktop icon back? It made it much easier to get to the desktop from another program.
View 4 Replies View RelatedYesterday I've formatted my PC and installed Windows 7 again. Everything is fine, however, some tray icons are missing, like Comodo Firewall and Realtek HD Audio tray icons. Could this be related to some Windows Updates or something? I checked Task Manager and the program processes were running (Comodo/Realtek), just the tray icons were missing.
View 4 Replies View RelatedI've had this issue for a long time and it is that the volume icon wont show up at the bottom right of my screen for my pc, i go to activate it from control panel and its greyed out. I have tried other methods like restarting explorer or going into regedit and doing a bunch of stuff.
View 4 Replies View Relatedi have a ADSL connection with a router connected to my local area connection
and i recently brought a HSDPA mobile broad band connection with HUAWEI E156G USB stick
is there any way to use both connections same time? like for download local area connection and for browse HSDPA connection.
Ok i have a problem and i cant seem to fix it. i haev 1 Nic card installed yet in my Network Share Center it shows HOME Private Undefined Public the 2nd i want to go away. every time its there i cant connect to the internet. the only way i can temp remove it is to disable the network card then go to the control panel and re-inable it this will only bring back the HOME one again but as soon as o reboot the other one it back. i have been at this for a few days and i REALLY dont want to redo my computer to fix this.
View 3 Replies View RelatedMy laptop {NV53 Gateway} quit searching for networks, and eventually displayed no connections are available. I have looked for solutions all over the internet but I can't find any. The troubleshooter doesn't work for me. It says the driver is experiencing hardware issues, but I know it doesn't, because I looked in the device manager and it doesn't have any issue.
I am trying to figure out what the problem is, I've tried to connect to a network, that doesn't work & I've also tried setting up a new network but that doesn't work either. My Wifi button on my computer is on, and I do have a card installed on it, and it still doesn't show up with any networks. I did ipconfig/all and my Ethernet Adapter Local Area Connection says media disconnected only because I dont have it connected to ethernet...
On the other hand, it says:
Tunnel adapter isatap. {45E92676-7CB114F99-8B8C-2BE1DA2A0FEA} and it is a Microsoft ISATAP Adapter (which I didn't know I had). And the other is a Tunnel adapter Teredo Tunnneling Pseudo-Interface. Both of them are media disconnected.
Broadcom NetLink {Tm} Gigabit Ethernet is my ethernet connection. I usually go wirelessely.
I have installed a clean copy of Windows 7 RC1 Build 7100 on my laptop. Whether I am connected to the network using a lan or wireless connection after waking my computer up from sleep I can't get any connection to work.
The wireless shows a limited connection and the wired shows a cable connected by no network connection.
As soon as I restart or shut down/reboot both or either connection restarts automatically and the Internet works.
This is really inconvenient when using a laptop on the move. Any one got any ideas?
can you combine two network connections and use a single IP in Windows 7 ? I'm using my main rig as a file server... and oftenly lack the network bandwidth for the other users... i'm not ready to migrate to a gigabit lan
View 3 Replies View RelatedWell I still haven't figured it out yet, but apparent i'm not alone...
"Ghost network" serious network adapter bug
How do you rename the default "Network" connection name in Windows 7?? In vista, you could click customize in network and sharing center to rename the network and change the icon, etc. Windows 7 has no such option.... Also, Every time I restart my computer, I automatically get connected to an "unidentified network" public network type, and it says "mixed network". I can't connect to the internet at all when it does that. I have to disable my adapter and re-enable it to correct the problem. Any thoughts ?? It's quite frustrating because it happens on every boot.
I am showing not connected (red x) to the Internet even though I am connected. This just started happening a few days ago, up until then I would show the normal connected icon. I read somewhere about deleting data from my Reg Edit, but that was too complicated for me to do. Does anyone have any other solutions to this problem?
View 9 Replies View RelatedI renamed the wireless network (ESSID) of my router from one of my Windows XP PC's, and then found that my Windows 7 PC could no longer see any networks at all (there are several from neighbours in addition to mine).
Nothing seemed to help - Rebooting, uninstalling drivers for the wireless card, etc. Eventually I got it to work by giving the network card a fixed IP address, and the it could see all the networks again. I could then change it back to DHCP and it was still okay.
I found a previous thread on this but the screens showing how to do this are gone.
I want to rename "home" to my own network name. I am on a wireless USB adapter.
I have updated several computers to Windows 7. On this particular computer (Dell Dimension 8400 desktop with Ethernet connection), each time there is a reboot or shutdown, when I log back in, the computer is disconnected from the network. I see that the router gives the computer an IP address, but Internet Explorer does not open Websites, Outlook does not receive email, etc.When I navigate to the 'Network and Sharing Center', I notice that there are 2 'Network Locations' - 1 'home' and 1 'public'. I have attempted to delete the 'public' location, and I have also attempted to merge the 2 'Network Locations' into 1. This seems to work, but I still cannot surf the Internet. Also, after a reboot, the 2 'Network Locations' are back--even after I merged or deleted them.
I have found a workaround for this. After each reboot and/or shutdown, I navigate to the 'Network and Sharing Center', I click on 'Change adaptor settings', I right-click to 'disable' the 'Local Area Connection', and finally I 'right-click' to 'enable' the 'Local Area Connection'. At that point, the 'public' location goes away (which leave only the 'home' connection) and I am able to immediately surf the Internet, receive email through Outlook, etc.This is a major issue because if the computer is rebooted, I can no longer connect to it remotely, until I am in front of the computer again to disable/re-enable the 'Local Area Connection' adaptor
When i was installing the network connection driver in windows 7, it did not allow me to install the driver. And Intel i not release new driver for windows 7. My desktop board is DP965LT
View 5 Replies View RelatedI recently ran a system recovery on my Samsung 305V and set it back to factory defaults. Now my problem is connecting to the internet. I have hardwired it to the router, also reset the modem and router several times. I disabled the firewall and tried running in safe mode with networking, everything has failed. I looked in the Device manager and there are no devices in the network adapter category besides two Bluetooth Devices. Under the Other Devices category it shows Ethernet, Network and SM Bus Controllers with yellow caution signs on them, I don't know what these are but I can't update the drivers on them or anything.
View 3 Replies View RelatedI was on a flight with EasyJet today, and, the cabin manager confirmed that WiFi was available on the aircraft, and, as a matter of fact Windows 7 was indicating that new connections were available, however, I had a blonde moment. I could not browse anywhere to discover the name of the network and try to connect. I think that this is a design flaw, as WinXP allows users to discover new SSIDs, or else the SSID is configured in some way that it cannot be found is it possible?
View 2 Replies View RelatedHow to Create a Windows 7 Network Connections Shortcut ?
View 0 Replies View RelatedI have just got a new laptop with Windows 7 (finally!) My question is this:
Is there a way to configure multiple internet connections with either a preferred primary connection or a way that I can manually route applications to a specific internet connection.
For example I am connect to a corporate lan for corporate email, unix access etc, can I plug in my 3g card and then use that connection when i use msn or a specific browser? I want both connections active at the same time, but the banned stuff on the corporate network to use my 3g connection.
Following the latest windows update (possibly a coincidence) I now have two instances of my cd drive showing in the notification area.
These relate to the Vaio power management. I did think that it might be a cache problem so I ran the icon cache clearer found here Notification Area Icons - Reset
But after a reboot they are both back. In the task manager there are two instances of SPMgr.exe