I saw someone had posted earlier about what I think is the same issue, but the page disappeared. My TV is not going to the resolution that I set on the computer. It is going to 1920x1080 which looks awful since it is not its native setting. I wanted it set to 1360x768 which looks the best. Does anyone know why my TV is doing this? I use to be able to do it but had trouble recently when I showed my friend today.
View 1 RepliesI'm trying to watch doom but, it's a dual audio avi it plays fine using the eng track in any other player but media center using the media browser plug in chooses the alt language.
View 1 Replies View RelatedI am running a dual monitor setup with my TV hooked up via HDMI to my laptop.
Everything was working fine before, I always had the laptop as my main display yet I could play a video or a game fullscreen on the TV.
Since a couple of days, as soon as I put something in fullscreen, it immediately goes on my laptop, regardless if it's open on my TV or my laptop. I don't remember changing/installing anything that could've changed that...
I checked a bit in the AMD vision software and the Windows control pannel but I can't seem to solve my problem without switching my TV as the main display. I also made a quick search on google as well as here but the problems were mainly with Flash, which isn't in cause here.
Here are my system specs:
Toshiba Satellite L75D
Windows 7 home premium 64-bit
AMD Radeon 6520G
im running win 7 x86 in a vaio vgn nr 21s/s with a 8400mgt and i cant find a driver which displays my correct resolution in my external wide screen (22'' at 1680/1050)
all i cant get is 1600/1200 or above but not he optimal.
I'm not sure where to put this post, so I'm putting it here. I have a dual monitor setup, an HP LP2275w as my primary monitor and a Viewsonic P95F+ CRT as my secondary monitor that I switch on from time to time. My problem is that when windows starts, it always goes to the secondary CRT monitor, even if it's off.
I have them set up correctly in the display settings where my LCD is the the main monitor, 1, and the CRT is 2. I also have this set correctly in the nvidia control panel, but I get the same problem every time windows starts.
Is there a way to fix this?
certain programs always open on the 2nd monitor which i dont always have switched on. For example I double click the program to run and it always opens on the 2nd monitor even if I drag it to my main monitor it always defaults back to monitor 2. Also why when I run programs in full screen (games mainly) when I exit out the folders that were open are a difeerent size to what I set them at before running the game sometimes even the folder will move to the 2nd monitor upon exit.
View 2 Replies View RelatedI have tried to set the resolution on my pc but its not letting me so everything is fuzzy.
View 1 Replies View RelatedI've a Core i3 processor on Intel DH55TC Mother board with HD graphics. The system is new and I've installed Windows 7 with drivers provided with Intel Motherboard. But once I installed the graphics driver my monitor shows lot of dots on screen. I've LG 16" Screen LCD Monitor. If I uninstall the graphic driver, the dots will go but the correct resolution for my monitor is not available.
View 9 Replies View RelatedI really hope that you can help me. I installed Windows 7 RC and after install my monitor resolution is set to 800x600. If I try to raise it, I get just one more option and when selecting it, I get a black vertical bar on the right of the monitor with still very bad resolution.
My Display Adapter is listed as Intel (R) 82865 G Graphics Controller (Microsoft Corporation XDDM)
and my Monitor is: SyncMaster 943 NW/943 NWX/ NW 1943/NWX 1943.
I hope you can help me find a solution to this problem.
Grandma's computer - trying to troubleshoot from Chicago for a computer located in California. About to kill myself. Please help.
Graphics card on computer is an integrated Intel G33/G31 Express Chipset Family adapter. I purchased a VGA splitter so that she can connect it to her LCD monitor and Plasma TV.
The monitor's native resolution is 1680 x 1050. HDTV is 1280 x 768.
My grandma complained that the resolution was messed up (I later learned that it was set to 800 x 600). I asked her to set the resolution to 1680 x 1050, but when she does, she gets the message that "the current input timing is not supported by the monitor display." I checked the refresh rate -- it was set to 60hz. None of the other 1.6 ratio resolutions would even show up on the available list of resolutions.
I had her plug the LCD monitor directly into the computer (sans splitter). No error message. The resolution stuck right away.
So, how do I use this splitter and still get 1680 x 1050 on her LCD? I don't even want to know what will happen to the TV's resolution when we do this, but I can pray.
So I recently just hooked up a 2nd monitor to my computer just to play with it. Unfortunately, it will not go above 1024x768. I would like to set it to 1280x1024. The monitor is a Digimate DGL20, it's an LCD that was made back in 2005. The screen's max resolution might be set to 1024x768, but if that's so its there anyway i can set it to 1280x1024?
View 6 Replies View RelatedI did a clean install of Windows 7 from XP. Now I cannot get the resolution to change on my monitor. I have tried updating drivers but it still won't work.
My computer is a Dell Optiplex 160L and the monitor is a Proview Pro 458.
Can anyone help me fix this?
Do you remember Windows 95? You could set your desktop resolution bigger than the resolution of your monitor (it could have a 1024x768 desktop with a VGA monitor - 640x480). Now we all have monitors with a resolution of almost 1280x1024 (mine is 1680 x 1050). We have twice as much space in size, but almost five times as number of opened programs. Regardless of many windows programs (like the ones I use, and I think many others), which, of course, engage, are contextual, but reduce the space available for the job.I already throw some programs that allow you to manage more virtual desktop, but they are able to separate programs, not to give you more space.
I already throw some programs (like gimespace) that they simulate the desktop oversize shifting all visible windows into a direction, but if a context switch off a window, I shift the desktop and the context reshow that window, it will appair in the same phisical location.But I like exactly that Windows 7 makes exactly what Win95 did.
Anyway, this is my issue. Whenever I turn on my monitor, I find my resolution gets changed to 1280x1024 instead of my native 1440x900. This happened with the latest nVidia driver, the older nVidia drivers, and the built-in Microsoft driver. I couldn't get my native resolution back unless I rebooted the machine entirely.
This bug has gotten under my skin to the point where I went back to using Vista, which I didn't want since despite that issue, Windows 7 was a treat to use. Does anybody know why this keeps happening? My video card is an eVGA GeForce 9800GTX+ and my monitor is a Gateway 19 inch FPD1975WH if that helps.
I don't know whether this is a Windows 7 problem or a Catalyst problem, but here goes...
I have installed Windows 7 (clean) and the latest Catalyst drivers for my ATI HD4850 card. My monitor is a Samsung SyncMaster 2243NW, a 22" panel with a native res of 1680 x 1050. I have installed the monitor driver from Samsung's website and the monitor is now showing correctly in device manager.
When I right click on the desktop and choose "screen resolution", the "change the appearance of your display" screen offers only "display device on DVI" ion the drop down menu, not the Samsung monitor, and does not offer me the native resolution. The nearest is 1440 x 900. If I click "advanced" I'm taken to the catalyst driver screen which correctly identifies the monitor, but bizarrely still offers only the same choices of resolution as the Windows 7 screen. 1680 x 1050 just isn't there.
Can anyone help me get my monitor to run at native res in Windows 7?
what a big ass step up in performance going from vista 32 bit to 7 64 bit, wow!
So anyway ive managed to get everthing else working on my computer but am having a problem setting the native resolution of my LG Flatron L204WS monitor. I've had a search in this part of the forums and couldnt find anyone with a similar problem so i hope im not posting another unecessary post!
Graphic card: 8800 GTX
Driver version: Windows update, the newest Nvidia Drivers for windows 7
Monitor cable: VGA, as this is all it supports
The problem: When trying to set the native resolution of my monitor to 1680x1050 im getting the message from my monitor that it is out of range, i think the setting for refresh rate is at 59hz and wont change to 60. I have located some LG drivers for the monitor and installed those and now windows recognizes my monitor in the advanced settings but not in the direct window of screen resolution. Could this be why? Or could it be related to the fact that the resolution atm 1400x1050 works with 59Hz but 1680x1050 does not work with 59Hz?
Ive seen a few other posts with people stuck on 59 and not being able to change to 60 but there has been no real solution found as of yet. I think i have listed all the relevant information needed for a bit of troubleshooting only if you were so kind to have a look and have a ponder
O yes there was one other very strange oddity, when i run a game such as Team Fortress 2, i can set my resolution to 1680x1050 and it runs fine, how very odd! Thats where this problem stumps me even more!
Can't get monitor to display same resolution between 2 workspaces - Microsoft Community Copy/paste of text in OP (posted Nov 21, 2012): Ok, so here's my setup:HP EliteBook 6930p with ATI Radeon HD 3450 graphics card. Win 7 Pro 32 bit installed.I have 2 workspaces, both with docking stations.Workspace 1 (primary work site) had 24" wide (primary monitor) and 19" wide monitors.Resolutions that Windows let me set were 1920x1080 and 1440x900, respectively. These monitors were also hooked to the docking station via DVI and VGA cables, respectively.Workspace 2 had a 19" standard monitor (1280x1024, VGA, set as primary) and then I would open the laptop beside it for the dual monitor (1280x800).Today I have pulled the 19" wide from workspace 1 to replace the 19" standard at workspace 2. Windows, however, will only let me set the resolution to 1280x720 (still using VGA). Even taking off the "hide modes" option or going into the ATI Catalyst Control center to try and force it does not work. I've also tried switching between which one is primary or even making it single monitor display (on the 19" wide). 1440x900 is simply not available.
View 9 Replies View Relatedsuddenly i can't use the old monitor resolution. I was using 1440 x 900, now it doesn't let me anymore; when i 'forced it' from nvidia control panel it appeard with two black bars on the sides and foggy text. I think is a problem with the monitor recognition, because it doesn't appear my name monitor, it appears Generic Non-PnP Monitor.I mention that i already reinstall the windows and graphics driver.
Monitor: Acer x193w Graphics card: Msi GeForce GT630 2048MB DDR3 PCI-E
Windows 7 installed without any problems, and found all the hardware devices, but the only problem I have is that the monitor will only dislplay at 1920x1080. If you lower it , the monitor will not display a full screen. Tried all resolutions, and have the latest 191 drivers. Any ideas..
View 2 Replies View RelatedI've got Windows 7 Ultimate (x64), my graphics card is an ATi 4670HD and my widescreen monitor is a 22inch Samsung SyncMaster 225MW.
Everything looks and works perfect. When I go to display, I click detect, and ofcourse it finds my monitor and sets it to its native resolutiob (1680*1050.)
But when I restart my computer, it will be set back to 1024*768 and it will be listed as the generic monitor.
The latest ATi drivers are installed on a fresh copy of Windows 7 and there were no hitches at all. Also to add, I've got 2 seperate DVI cables used to make sure the cable wasn't at fault and they both give me the same result.
What is the problem? This is one I can't quite get my head around.
I'm having trouble getting my monitor to display at its maximum resolution and I cannot for the life of me figure out what's wrong.
I have an ASUS VH242H 23.6" Monitor which has a native resolution of 1920 x 1080. I originally had windows xp and it could display this resolution just fine. Now, after installing windows 7, when I hook the monitor up to my laptop, I can only get it to display up 1400x1200. Going past this point causes the monitor to flas an out of range message. Furthermore, my computer won't let me designate the refresh rate as far as I can tell. I updated the driver for my graphics card and that didn't seem to make a difference.
I have an HP nw8440 Mobile Workstation with a ATI FireGL v5200 GPU.
whats the best resolution for a 17" compaq monitor
View 4 Replies View RelatedI am increased resolution power of my monitor and my monitor does not support it now what can i do.
View 3 Replies View RelatedI set the monitor resolution to 16800 x 1050 (recommened) with smaller text and it works fine. But when the PC is woken up from standby the resolution is now 800 x 600 with larger text, which is not what I wanted. How do I stop this happening, please? This is a new machine running Windows 7 home premium 64 bit with 22" Edge TFT monitor.
View 9 Replies View Relatedmy LG w2243s worked fine on my computer before i upgraded to windows 7 from XP proffessional. now it doesn't recognise it. and wont let me adjust the resolution to the monitors settings, i tried updating the driver, but was told i already have the best driver available. my monitor is not listed in DEVICE MANAGER and when i download the driver from LG, it does nothing when i click it..
View 6 Replies View RelatedI have a new computer and monitor. It worked perfectly and the monitor was installed emmediately without me doing anything. So it all worked perfectly - until one day my SSD broke. So i had to send the SSD back - and got a new one. Great, I thought, now it will all work perfectly again. But, as I have finished everything and be happily in my account, my monitor wont let me set the 1920x1080 setting...its not even listed. OK, I thought, then I will install the driver. So I installed it from the CD delivered together with the monitor when i got it, but theres still no 1920x180 - setting listed. I tried nearly every driver download for my monitor and searched nearly the whole internet for solutions, but it was all the same. as highest the highest two are 1856x1392 and 1920x1440 - which looks horrible. So, the best resolution is 1400x1050 - which is just too wide. My monitor is the Samsung SyncMaster S22A300 LED-Monitor with, as said, 1920x1080 Shall i contact the management?
View 5 Replies View RelatedWin7 dual monitor resolution resetting
View 1 Replies View RelatedHow do I stop the screen resolution from reverting back to 800 x 600 when switching to external monitor? Intel(R) Graphics Media Accelerator Driver for Mobile thinks the optimal resolution is 800 x 600 when it's actually 1024 x 768. How do I make it see 1024 x 768 as the optimal resolution and make it the default for the external monitor?
View 1 Replies View RelatedI've built myself a PC and run into some problems with the display resolution.
OS: Win 7 x64
Graphics Card: XFX/ATI Radeon HD 4550 512MB PCI-E 2.0 VGA/HDMI/Dual-Link DV
Monitor: Hanns G HZ194
Display Adapter: ATI Radeon HD 4550
Monitor: Generic PnP Monitor
Current Resolution (I guess) is 1024x768 although the settings show that I have selected the recommended 1366x768. Everything is moderately big and chunky - not safe mode though. Is that the Generic Monitor is causing the problem. How I can get a sensible resolution. It's causing me some big problems as some of my applications don't fit on the screen properly and don't have effective resize/scroll bars.
So I upgraded to Windows 7 64 bit home edition. I am running a duel monitor setup, the primary monitor is a 24 inch monitor running at 1920 by 1980 and a 19 inch secondary monitor running at 1280 by 1024 (it's the highest resolution that monitor can do.) My video card is two SLI'd nvidia geforce 240 1gb cards.
Before I upgraded, I didn't have any issues with the two monitors (using extended desktop.) Now after the upgrade, the secondary monitor is not 'filling the screen'. It's squished the image up and is leaving one inch of the monitor on the left side empty. When you move the mouse between the two monitors it skips over that space as if it isn't there.
Now, it's not a fault with the monitor, I tried adjusting settings and the image remains squished. I also tried using the nvidia control panel to adjust the resolution manually but that doesn't seem to work either. I'm running the latest release version of nvidias drivers, haven't tried a beta yet.
Suggestions on how to get it to use the whole monitor again like it used to? Because this is really annoying.
Edit: Upon more fiddling, I have found it isn't using about half an inch of the screen on the right side of the monitor either. And the desktop is extended down below the base of the screen, though I cannot tell how far.
I got a new LCD tv today and wanted to use it as a monitor as well.
I've connected it up as my main monitor so when its connected via VGA my laptop goes blank and the screen is on the tv.
I was messing with the resolutions to try get the right one and now it says its in an unsupported resolution.
The problem is, I cant change it coz the screen wont show on the tv and its not showing on laptop because i set it not too.
When I unplug the connection I cant change the settings for the external so Im stuck at what to do.