I was wondering if there was any type of program that allows the computer to run in a minimal power state while leaving file sharing accessible so that I can transfer files without one computer using much power. I looked around and kinda doubt it, but I thought i'd try here first
View 1 RepliesI've done a lot of searches using variations of the above title and came up empty or just plain missed the answer.I'd like to know, if it is not asking too much, the following points:
1. What exactly is the function of Link State Power Management in the Power Options Advanced Settings, PCI Express?
2. What are the implications of using the options available:
a) Off.
b) Maximum power savings.
c) Moderate power savings.
d) Which option is the best selection for my Dell laptop.
have been using my pc lately and iv been getting the driver power stat failure alot lately and what happens is my internet goes out and when I shut down it takes at least 5 minutes until it goes BSOD and the error message appears cll me how to fix it as soon as possible because this has been going on for a while and I want it to stop. So can anyone tell me step by step what to do so I can fix this issue and get on with using my pc
View 1 Replies View RelatedI've been experiencing issues with my computer. It tends to blue screen and reads "Driver_POWER_STATE_FAILURE". I've tried to run some scans and diagnostics and even backed up my PC and then rebooted it with factory new settings, but it is still BSOD. I have a dump file, but I cannot post it because it says I do not have permission to open or attach it.
View 3 Replies View RelatedMSI S6000 running OEM windows 7 Home Premium 64 bit - 1.5 yearsIntel I5 4GB Ram unning IE 9
View 3 Replies View RelatedI periodically get a driver power state failure BSOD. It's happens about once a week or so.
View 4 Replies View RelatedI get this bluescreen with a power driver state failure 0x0000009f. I just restarted my pc but then a week later i got the same message.
[code]...
My current knowledge of hybrid sleep is S3 when it has power, and S4 when it loses power. Just need som1 to confirm this.
View 7 Replies View RelatedI recently upgraded from Vista to Windows 7. Ever since then I've been getting intermittant blue screens that say Driver_Power_State_Failure. This is annoying and Microsoft seems to have no answer. I have to restart then start over. All my drivers according to MS are up to date. Any answers?
View 8 Replies View RelatedI have a year old Windows 7 Acer Laptop. Has been performing fine, but have had a couple of Blue Screens in the past week, one of which was a "Driver Power State Failure".Have attached the minidump files to this message.
View 1 Replies View RelatedI just installed a new Plextor 128 gig SSD (which got great reviews on newegg) and did a fresh install of windows 7 onto it, and now I get a recurring BSOD that says DRIVER_POWER_STATE_FAILURE. I attached all the required files (I think).
View 1 Replies View RelatedI keep getting a BSOD "driver_power_state_failure" on my windows 7 64 bit homebrew PC. I have attached the minidump file. Does anyone have any idea which driver might be causing the BSOD?
View 7 Replies View RelatedSo about a month and a half ago I bought myself a new MSI Laptop, and in the past 3 weeks I've had 5 Driver Power State Failure (DPSF) BSOD's. I've searched around but I'm not confident enough when it comes to BSOD's to actually do anything without first getting some advice for my particular problem.All I have really been able to tell from this is that the error always occurs at the same location, ntoskrnl.exe (+7cc40), which, being a critical part of the OS, I assume is a very bad thing. [code]
View 3 Replies View RelatedI am getting these "driver power state failure" crashes with increasing frequency. I suspect it's a driver conflict involving my M-Audio Fast Track Ultra (music recording interface), which is connected via USB.My computer is an HP 671-340US notebook, bought in June or July 2010, with Windows 7 Home Premium (and a whole bunch of HP bloatware!) already installed. I have eliminated some of the HP crap because it constantly interrupted my work, and shut down my computer right in the middle of what I was doing, if I missed the message balloon. Don't know if that contriubuted to the problem. I updated all the drivers and Windows 7 yesterday and today. Crashed again this morning. No hardware upgrades; using it the way it came
View 2 Replies View RelatedI had Firefox, a bunch of Adobe programs (Flash, Photoshop, Illustrator, InDesign maybe) open. I was in firefox (which does freeze from time to time) and got the BSOD.
Win 7 X64 Retail, fresh install around December Everything is new as of last year except the Video card and hard drives (couple of WD Blue 500GB Raided, and some others for storage)
I am having this BSOD since 14 days , my laptop HP dv6 6165 tx is new and a month old and i play games on it for almost 2-3 hours daily it has OEM windows 7 64 bit installed on it. I have attched the mini dump report files and the perform/report files in the attched file zip folder
View 9 Replies View RelatedRecently got a new computer (about 1 month ago) for our office and we keep getting the following BSOD almost daily:The computer has rebooted from a bugcheck. The bugcheck was: 0x0000009f (0x0000000000000003, 0xfffffa80080d3060, 0xfffff80000b9c3d80xfffffa800994bac0). A dump was saved in: C:WindowsMEMORY.DMP. Report Id: 051012-14414-01. tried to analyze the mini dump files myself, but I can't seem to get them to open up.Not sure how to fix this issue and windows troubleshooting is uselessCurrently running: Windows 7 Professional x64 Sp1 OEM
View 1 Replies View RelatedMy very recently purchased laptop was showing some problems from last 2 days. It would get stuck at the shutdown screen and then after extended span of time I had to press and hold power key to turn it off. It happened only twice. I had updated atleast one or the other thing before shutting it down...either through HP Support Assistant or Windows update.
Last night i ran Windows Update and tried to turn off my pc but since updates were being installed it said Windows will shut down once the updates are installed automatically...so i went to sleep only to find in the morning a BSOD. It was stuck on it again i had to turn off my pc by holding power button and then windows refused to boot beyond the Windows 7 logo black screen. But after a couple of retries it started.
Windows 7 Home Premium x64 OEM Age of the System- 6 days
I'm running Windows 7 and whenever I close my laptop my computer crashes and restarts. My settings are set to go to sleep mode when the lid is closed. I ran Blue Screen View and have a Driver Power State Failure. I also ran the SF Diagnostic Tool and attached the results.
View 8 Replies View RelatedUsually I'm able to sort my own computer problems (with the help of good ol' Google). However I've been stuck with this for some time now. BSOD, Driver_power_state_failure. I can't really pin point a particular time this happens I'm afraid. I built this PC myself (my first one) about 7-8 months ago(?) and haven't really had any problems.
So far, I've reinstalled windows and updated all my drivers as recommended from many Google searches but I am still getting the same BSOD and frankly if I can't find the answer via Google I'm pretty much buggered . After reading the posting instructions I've used the diagnostic tool, so I'll attach the zip.
I recently installed some Windows updates on my new computer, and after the first boot with the updates my computer froze and I got a BSOD saying "Drive Power State Failure"
View 1 Replies View RelatedWindows 7 pro..I have been getting driver power state failure at shutdown. what do i need to copy and post to address this issue?
View 1 Replies View RelatedI have been experiencing the BSOD for around 1-2 months now, its not that frequent but when it happens it consistently happens throughout the day, also after it relaunches the sound it all messed up and crackly. Im currently using the Alienware M17x which i heard it is quite common on,
View 2 Replies View RelatedI have a 13 days old Windows 7 pro RTM x64 system. In the past two days I had
two BSODs of similar fashion:
The machine was running for several hours at that point, and suddenly the
blue screen pops up. I wasn't really pushing the system, just browsing.
The crash dump is like this in both cases:
This was likely caused by the following module: ntoskrnl.exe
Bugcheck code: 0x9F (0x3, 0xFFFFFA8003B4B050, 0xFFFFF80000B9C518, 0xFFFFFA80052E0E10)
Error: DRIVER_POWER_STATE_FAILURE
file path: C:Windowssystem32
toskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
The crash took place in a standard Microsoft module. Likely the culprit is another
driver on your system which cannot be identified.
To open with I did search the forums and find some similar posts, however there was no apparent solution other than disabling sleep mode or rolling back drivers neither of which are solutions acceptable to my company.I've recently started having a BSOD appear on my work laptop (HP Pavilion dm4), it seems to be when the laptop is shutting down to 'sleep' mode, at around the same time these bluescreens started up there also started to be connectivity issues with the wireless on board, it will connect for a variable amount of time, then simply drop the connection, usually for at least 20 minutes before reconnecting to the wifi, if I attempt to disable/re-enable the wireless card it seems to lock up in the midst of that process effectively forcing a restart. There have been no new drivers installed on this machine (all the drivers on the hp website are dated before the apparent manufacture date) and disabling sleep mode is unfortunately out of the question.
I can provide the minidump if that would be helpful, at this time I'm just looking for a direction to look in, as other than the apparent correlation between the blue screens and wireless issues I don't have many clues.
Could anybody help me out with this or point me in the right direction?
Whenever I try and install Windows 7 build 7068 or 7077 the installation process freezes and after a while i get a "DRIVER_STATE_POWER_ERROR", If I then restart the machine the installation process starts up again but just hangs.
I have tried this with both a clean install and an upgrade and I get the same thing.
However, build 7000 and build 7057 install fine.
I am using a gigabyte GA-E7AUM-DS2H motherboard with the Nvidia 9400 chipset with a mirrored RAID configuration on two of the hard disks. The windows partition is on a non raided disk. The video is outputted via HDMI and the audio via optical to my AV reciever (Harman Kardon AVR-255)
also another thing, build 7057 seems to work fine as I am using it only as media center. HD video, dixv, mp3, recorded and live TV are all fine in media center and the configuration to pass DOLBY, DTS and AC3 5.1 surround sound to my AV reciever works perfectly. However, whenever I try to play a DVD, the screen stutters and flickers every few seconds as though the signal is lost. If i plug the HDMI cable directly in to my samsung plasma, the problem goes away!
If this was happening with all video I could put it down to the nvidia drivers not sending a correctly formatted signal, but it is only with DVD playback. I have tried the drivers which were installed automatically with win7 and the nvidia windows 7 beta drivers and I still get the same problem.
So I keep getting the blue screen Power State Failure which I am sure you are all aware of. It's happening a lot to me, and it really needs to go away it's causing my computer to be incredibly slow.
View 12 Replies View Relatedthe last couple times I've sent my laptop to hibernate I have had driver power state failure BSODs. I usually have some programs like Chrome and Spotify open. I rarely shut down so I'm unsure if the problem is specifically related to hibernation.I have attached minidumps and updated my profile info with hardware specs.
View 1 Replies View RelatedI've got randomly occouring BSODs on my Dell XPS 9000. The BSOD is always a driver power state failure. My system is ~3 years old. Running a 2 year old Win 7 Ultimate x64 image.
View 9 Replies View RelatedIt happened yesterday while i was De-fragmentating my computer and like a month ago also. So it happened two times already, all this BSOD thing so i may not know the computer language to well , in fact its the first time this has ever happened to me (BSOD).
Additional Info: The Laptop is new about 4 or 5 months old ill leave the information right here :
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
[Code].....
HP Pavilion DM1 notebook with Windows 7 OS 64 bit version has been experiencing BSOD many times for the past few weeks. Normally, the BSOD occurs when there is a sudden interruption in the Internet connection (Internet connection is through a USB modem as a dial-up connection). In such a case, the system refuses to acknowledge the presence of the USB in the port. After approx. 10 minutes the BSOD occurs. Else, if the Shut Down command is given, the Shutting Down screen appears, it remains for around 10 minutes and BSOD occurs eventually. The screen that appears is as follows:
DRIVER POWER STATE FAILURE
Technical Information:
STOP : 0X0000009F 0X0000000000000004 0XFFFFFA800141DB50 OXFFFFF80000B9C510
Problem Event Name: Blue Screen
OS Version - 6.1.7601.2.1.0.768.2
Locale ID - 16393
Service Pack - 1_0
product - 768_1
[code]..
"The system has rebooted completely without cleanly shutting down first. This error could be caused if the system stopped responding,crashed or lost power unexpectedly" The system is approx. 1 year old. The OS is Windows 7 Home Basic 64 bit OEM version. The OS is also 1 year old. No re-installation has been done. BIOS update not done. Windows Security Essentials has been installed successfully, that means the original OS has been pre-installed. Not able to run perfmon/report. When this is typed in the start menu, it says: No items match your search"