Keep Losing Ability To Rename/Move/Add Files To Internal HD?
Oct 17, 2011
I recently built my first HTPC. Everything works great. I've got a ton of storage for all my shows/etc. The problem is that on my main 2TB HD, I've set up a partition for the OS (Windows 7) and then a larger Ex-Fat partition on the rest of the drive where I store my media. Occasionally, I will go to that partition and will be unable to edit folder titles, create new folders, move anything around the drive or move anything on or off of it. I scan the drive, which forces an unmount of the partition, find no errors, and then remount the drive and everything is fixed.
View 3 Replies
ADVERTISEMENT
Dec 17, 2009
I have all my programs stored on the P: drive but its running out of room and the D: drive is available.
Question: If I move all the programs to the D: drive and rename it to P:, will everything run from existing shortcuts?
Is there a simpler migration I am overlooking?
View 3 Replies
View Related
Jun 15, 2012
My computer has been acting a little weird lately. Recently i've downloaded some .mkv files and now i can't rename or delete or move them. I tried using command prompt and unlocker and it's still not working. It says "action can't be completed because it is being opened by other programme", i don't get this as i close all programmes and it still says the same thing.
My main purpose is to actually move them into another folder. It's only these few days that my computer is acting like this. I can move/delete/rename other avi or mp4 files.
View 5 Replies
View Related
May 1, 2012
I have a acer aspire 7750G-6634 laptop, 8gb of ram, 2 HDs, i5, windows 7 home (the one that came with the laptop)?Camtasia created a 50+ gb file on my D drive, I struggled to get the file to work but it seems like it was corrupted (couldn't use it) so I deleted it. Since then I started seeing the green ribbon of death when I was browsing folders on my D. It was always getting worse and worse, until one day I couldn't move/copy/delete any files that was on my D. Then I rebooted and my D drive disappeared?I was able to remove it, 30 minutes in the freezer, then I was able to connect it and save some files (maybe 75% of the files), then can't access it anymore.I bought a new HD from newegg (Seagate Momentus ST9750420AS 750GB 7200 RPM 16MB Cache 2.5" SATA 3.0Gb/s Internal Notebook Hard Drive -Bare Drive - OEM) and put the new one to replace the one that died.So far so good, but now I see that green ribbon again, but only on my D and only in my "Downloads" folder, the other folders on the D seems to be fine. I can't delete or modify any files in the Download folder.
*Scanned with Superantispyware
*Scanned with AVG2012
*Replaced AVG2012 with AVAST (Had issue with AVG before and I read it could be the cause of the issue)
*Scanned with Avast
*Scanned with SlimDrivers and updated the 15 drivers that were out of date
*Scanned with Emergency Kit (scan never finishes scanning, get stuck at 97% on 3 different files on the D drive so far)
*Checkdisk on both drives (C and D) 3 times (when booting the PC) 4-5 hours each time
*Defraged both disks
*Uninstalled Camtasia + many other softwares that I installed when the issue started (approx.)
*Used CCleaner and cleaned the registry and other files
*Tried to use Xplorer2 instead of windows explorer = same issue
View 1 Replies
View Related
Sep 11, 2012
I've been running my current set up for roughly two years and it has been fine until recently. My secondary drive for programs, storage, etc. will just disappear. It does not happen on any set routine or anything, just randomly.If I restart I do not get the drive back, however, If I shut it down and plug the drive into a different port it recognizes it again. I've gone back to the same port numerous times so none of the ports are bad.
View 5 Replies
View Related
Oct 21, 2011
Since 2 days, in a certain folder, I cant rename, move or delete folders or files. Now, it has spread to my desktop as well. If I rename a folder, even a new folder, the name changes ''magically'' within seconds to restore to its previous name. If I move the folder or file, it comes back and if I delete it, it restores. I tried to make a system restore, even format (!), the problem persists. I use this folder to tag and rename my new mp3s so I have to be able to 1) rename, 2) move the folders the files and folders in it.
View 1 Replies
View Related
May 14, 2010
Every time I delete/rename/move a file...the changes are not reflected in the folder until I right click "refresh".
Is there a microsoft approved fix for this?
View 9 Replies
View Related
Oct 21, 2011
windows 7 home premium sp1 i cannot rename .jpg files. when i right-click the file, the 'rename' option does not appear. normally there is a 'create shortcut' 'delete' and 'rename' option in the list near the bottom but not when i right-click on a jpeg, these three have been curtailed to 'create shortcut'.provenance of the .jpg varies - some come from a camcorder's picture-taking thinggy, some from the 'net, some copied from an other machine,etc but all with extension .jpg opened paint and did a 'save as' (to get the new name )then deleted the original (the one i wanted to rename).
View 6 Replies
View Related
Sep 23, 2012
I am having a peculiar issue with MKV files - when I attempt to rename or delete these files I am (sometimes) presented with the following error message:
In order to rename the offending MKV files I need to boot into Ubuntu (using a Live OS from CD) and if I want to delete the files I either must use Ubuntu or a "file unlocking program" within Windows (the FileAssassin tool that ships with MalwareBytes is my current preference).
View 2 Replies
View Related
Feb 14, 2012
I dragged a web address off and Windows created a shortcut. I was able to change the extension to .txt. The icon changed to that for a text file, and I could open the file and read it.
Since then, though, the url extension does not show up. If I select Rename and add .txt to the part of the filename showing, it evidently retains the url extension after the .txt extension because the icon doesn't change to the one for a text file, I'm not allowed to edit it, and selecting open results in it opening the web page - i.e., acting like it is still a .url file.
I have checked Tools -> View many times and the box for hiding common extensions is unchecked so that is not the problem.
View 7 Replies
View Related
Sep 23, 2012
I am having a peculiar issue with MKV files - when I attempt to rename or delete these files I am (sometimes) presented with the following error message:
In order to rename the offending MKV files I need to boot into Ubuntu (using a Live OS from CD) and if I want to delete the files I either must use Ubuntu or a "file unlocking program" within Windows (the FileAssassin tool that ships with MalwareBytes is my current preference).
View 1 Replies
View Related
Oct 1, 2012
How to rename files in Windows 7
[code]...
View 1 Replies
View Related
May 16, 2011
So I'm trying to make a personal shortcut on my computer to change a password using the shiftkeys .exe (C:WindowsSystem32sethc.exe) which can be done from setup.I'm looking to design this because I frequently deal with friends and family who have forgotten passwords, as well as my purchasing used computers.I want to automate the process, but I've hit a problem, which is making the batch file remove itself.I have a .exe file replace sethc.exe, with sethc.exe renamed to sethc.exe.I'm using the following lines Code: del sethc.exeren sethc2.exe sethc.exedel %0 The batch file deletes itself successfully (del %0), but it's completely failing at the removal of the .exe and the renaming. I've tried changing the targeting, checking the syntax, but as far as I can tell, everything checks out, yet it still fails.
View 6 Replies
View Related
Sep 30, 2011
I have been getting the following error (several in a day) when I try to rename files and/or folders via 'explorer.exe' GUI Now...this happens out of the blue so to speak and despite what the pop up widget says, the file or folder, in this case, was NOT opened in another process. In the above example, I was just trying to 'rename' the folder is all. I didn't even go into the folder at all.
The OS is Windows 7 64 Bit w/SP1 and 8GB DDR3.
The only things I can think of that might be causing the problem are the fact I have an 120GB OCZ Agility II SSD as my system drive with the following optimizations in place
View 4 Replies
View Related
Jan 16, 2013
how to make windows 7 rename the files i download in a series.I can't tell much about the work am going to use this auto rename for much because it's confidential.how i want it to be done.Basically i download "things" from a certain site for a certain use and i want to rename the downloads as something else.Basically, I would like my downloads to be renamed in the series of 1, 2, 3 etc automatically once i feed 1 manually for the first file i download.
View 1 Replies
View Related
Apr 17, 2011
I am able to play files with extension mkv using vlc player. But unable to rename or delete only files with extension mkv
View 2 Replies
View Related
Sep 30, 2012
basically (I'll try to be descriptive), I have an Excel file (extension xlsm) on my USB and I right click it, send to --> desktop (create shortcut). I see the shortcut. I right click and attempt to rename it with a different file extension, but the 'Rename' box doesn't show up like I believe it should and the file name changes without the warning. I need to do this for the shortcut I've created, not the file on the USB.I have 'Hide extensions for known file types' unchecked and 'Display the full path in the title bar' checked, as I believe they should be.
View 4 Replies
View Related
Dec 22, 2010
i am enraged, i have been having this problem for a bit, i disabled uac, i gave my user account full access permissions on all files and it still says i dont have permission, my hard drive is almost full now and i cannot delete stuff so i just wanna lay into microsoft with the force of 1000 suns
note: the files i am having problems with arent even on the C: drive, they are on my shared partition (i use this partition for documents music etc and just about everything that is not windows only)
View 9 Replies
View Related
Feb 5, 2011
Having difficulty with a homegroup and file sharing: one desktop PC with the family's main documents (which are on a separate drive to the system) and two laptops which need to access those documents. I've got them all seeing each other, and they can see the folders in the drive, but when I try to add files or rename files, it tells me that I need permission. I've gone through the advance settings to make sure the correct permission is selected, they all have the same workgroup name and different computer names. Sharing the printer attached to the desktop is fine.
View 1 Replies
View Related
Jun 19, 2011
I just figured out that I can't delete files from my external hard drive. It's WD Elements 320GB. Only thing I did before this occured is that I converted file system from FAT32 to NTFS via command in cmd prompt, but I'm not sure if that showed up after that. So, I don't have "delete" or "rename" commands on right click. Backup of all files is a no go since I don't have so much free space atm. I use my user account which is also admin account.
View 1 Replies
View Related
Apr 28, 2012
I require a batch file or free utility that i can redistribute from my web site to other users, (gamers) that will copy the contents of a directory inside their game to a new location and re-name the directory at the same time. Something like this; Copy "GenesisVehicleruck diesel4tonbaker"to "GenesisVehicleruckdiesel4tonbutcher".The batch file needs to be run without the need for a command line box being opened, that is, if the user can double click on it or run it with a 'right click' that would be great. Problem there is, I maybe need an exe file not a batch file. The other part of the problem is that the folder to be copied may or may not be in the same location on every PC that runs the file. It may be the case that the 4tonbaker folder is on; [code] and I require the end user to have no need to know, just for the directory to be copied and renamed when and where it is found.If possible I then want the batch file to perform a second task. I want to distribute a folder, lets say it is 4tonbutcher and in that folder there are files lets say doc1.txt, doc2.txt and doc3.txt.On any given users PC 4tonbaker has these same named files but the content is different to the ones in my folder 4tonbutcher, I want to update the newly created folder, 4tonbutcher with the new txt files I distribute.
So, User downloads a folder called 4tonbutcher from my site.Batch file copies and renames a folder from a location on the users PC, "Genesis Vehiclesruckdiesel4tonbaker" to "Genesis Vehiclesruckdiesel4tonbutcher".Batch file copies doc1.txt, doc2.txt and doc3.txt from the downloaded folder to the newly created folder 4tonbutcher.
View 1 Replies
View Related
Jun 2, 2011
Greetings Again,
My file and storage system is set up like this:
C: Drive - 120 GB SSD This is my Win 7 64-Bit Ultimate Boot drive. It has my most important Microsoft programs on it. Out of the 111GB available, I've used 42GB, leaving me 69GB free space. I want to keep this area open.
My next drive is a 1TB WD Caviar Black segmented into 3 partitions.
E: Drive = Program FIles This has the majority and rest of my programs. It also includes USERs Files. I've use 96GB out of 150GB. Out of that 96GB, 64GB are in USERS files.
F: Drive = Data Files. This stores all of my data except for media. I've used 91GB out of 350. I want to leave this be.
G:| Drive = Medsia FIles This stores all Media = Vids, Music, Graphics, Pictures. I've used 80 GB out of 500GB
I also have a 64GB ~ 55GB actual storage SSD drive that is partitioned but has no data on it or assigned drive letter.
Here is what I want to accomplish. i want to move my actual Program FIles to the 64GB SSD, assign it a drive letter, and keep the USERS files where they now reside on the F: dirve
My main concern is that in moving all these files around and splitting the USERS files from the Program Files that I'll mees up my Registry. Will someone please suggest some links I might read that will best help me acheive these moves.
View 3 Replies
View Related
Mar 15, 2012
I'm having an issue with the creation/modification date of .mov video files on my computer. Simply, they both keep changing to the current date/time when I transfer them to my computer.
For example, if I transfer my .mov videos from my Canon camera via USB to my computer (copy from one, paste into the other), both the created date AND the modified date in Windows 7 becomes the current date/time that I'm transferring them instead of the date/time they were actually shot (which is indeed on the file in the camera). All other video types from other cameras or the like (MP4, MPG, WMV, etc.) don't do this. In fact, I've never experienced this with any of my movie files before and have always been able to see the time they were shot because the created and the modified dates will be when they were shot (and only one changes when I move them).
.mov files automatically get the current date/time for both the created date AND the modified date meaning a video shot and dated weeks ago on the camera appears like I shot it right now when it's transferred to my computer.
I'm not sure if this is a Windows 7 thing with .mov files or a Canon thing. I've posted in a Canon forum and nobody seems to know what I'm talking about so I'm assuming it can't be that widespread. I just don't know where to go with this and it's driving me insane. I hate that I can't tell when my videos from a trip or whatnot were actually shot. It looks like they were all shot at the exact same moment weeks after I got back!
View 2 Replies
View Related
Jul 23, 2012
So currently I have Windows Xp and Windows 7 /32bit installed. Windows XP on C Drive and Windows 7 on D.I would like to install Windows 7 /64 bit over windows XP so I can use more than 4G Ram. So I would have both 32 and 64 bit windows on the same PC. I have few questions: Can I somehow upgrade from XP to 7 without losing data and files? Will I still be able to go on the Windows 7 /32Bit?
View 3 Replies
View Related
Jun 18, 2012
I have a program installed under "C:Program Files (x86)CompanyNameSWName". When the program runs it's supposed to copy some files, say FROM "C:Program Files (x86)CompanyNameSWNameDrivers*.abc TO "C:Program Files (x86)CompanyNameSWNameDrivers*.xyz
The program works on every machine it's been installed on, except for one (customer's) Win 7 64-bit machine. On that machine, nothing happens.
It's noteworthy that on that same machine an "insufficient access privileges" (or some such) message pops-up when an administrator trys to copy a folder to "C:Program Files (x86)CompanyNameNewName".
why this particular Windows 7 machine is being so picky? What should I have the installer do so that the application will be able to copy/rename its own files?
View 7 Replies
View Related
Jul 29, 2012
my machine is unstable IRQL NOT LESS OR EQUAL
View 7 Replies
View Related
Apr 2, 2012
Copying and pasting files is easy. But how do I move files so they no longer appear in original location. The time has come for me to make some room on my hard drive and the way to do it is move all the pictures to another drive. What is the command to do this? Isn't drag and drop copying and not moving? I suppose I could copy then come back and delete. But moving would be better I think. Less chance for a mistake
View 9 Replies
View Related
Mar 8, 2012
I'm the net admin for a small network. One of my users has a problem that has just started today, apparently. When emailed a link to a file on the internal network, from another user on this same network, clicking on the link simply gives an error about it not being allowed. (This operation has been cancelled due to restrictions in effect on this computer. contact your system administrator.)
All users are admins on their own local boxes. This user could perform this function prior to today. There is no problem with the structure of the link, nor with security for the file in question. (I first verified that the user has access to the file, and he does, he can navigate via Windows Explorer to the location, open the file, even has write access to that location)
Even when creating an email, and not using a masked link, but a full UNC path, the 'Crtl click' to go to the location results in the same error.
I tried removing spaces from the file name, same error. I tried typing out a link to a share (not a file), one that has no spaces and I know he has access to, same error.
This represents a significant problem. My users need to be able to send links to internal locations and files, and not attachments (for multiple reasons).
View 6 Replies
View Related
Sep 18, 2010
Just updated to Windows 7 and need to locate and use my WMM projects etc. on the new OS..I have copies of my old data etc which the install of W7 kept for me plus an acronis backup.
View 6 Replies
View Related
Nov 10, 2009
I think I was stupid enought to not notice and installed the windows 7 in a disc, having as first boot device another disc. -.-
Is it possible to put those boot files to the disc they should be?
View 8 Replies
View Related
Jan 24, 2011
How can I move files within Windows 7?
View 3 Replies
View Related
