Basically my xp was riddled with viruses so much so that I couldn't get it to boot without crashing so I tried installing Ubuntu but exited out before it could work essentially erasing my computer of any OS so now it gives me a "NTLDR is missing" error. Eventually I bought windows 7, booted from CD drive and started the install. I thought it was all fine and good but then I get a compatibility report saying to remove the CD and restart the computer normally then to put the CD in. The problem is that when I don't have the CD in it gives me the NTLDR error so I'm stuck.
I spent Sunday afternoon making bootable DVDs of the Win & ISO file I downloaded. None of them worked, and I used 3 different burners. Today I was at it again with different burners and as was reading the instructions for Free Easy Burner and ran across this piece of advise.If you have more than one DVD drive (like I do) the computer only allows for one disk drive to be booted from.Once I inserted one the DVD from Sunday into my read only drive it booted and Win 7 started it's installation.I will be dual booting so I want Win 7 on its' own drive and partition. Now I can unplug drive C: and load a clean Win 7. What a learning curve this installation turned out to be.
I've recently purchased all the new components for a new PC, and am looking to use my Windows 7 with it. My question is, and apologies if this is a stupid question (looked around for an answer but nothing seems to), if it can only be activated on one PC at a time, do I need to un-install it from my current PC for it to work on my new one? If not, and it installs fine on my new one, what do I need to do with my old PC to not receive the wrath of Microsoft?
I am having a compaq laptop.I am having a 500GB spare HDD which can be used as internal HDD. Its totally empty.Currently there is a 250GB HDD attached to my laptop which is having windows 7.I want to replace my 250GB HDD with 500GB HDD and install windows 7.But my DVD Drive is not working and I also dont have a USB(pen drive).I can connect my 500GB HDD as an external HDD via USB.What i want is to install windows 7 on my 500GB HDD by creating a partion in that 500GB HDD and replacing it with installation of windows 7.and than i'll replace my 250GB HDD with 500GB HDD and install windows 7 via that that partition that i created in 500GB HDD.I dont know how to make that partition bootable.
i bought new computer with no OS on it! i bought a gamer 406. and i bought a windows 7 home premium english so i did put the CD in and did the first part of the installation then i arrived at the setup when choose language for keyboard and time.. then worked press next and accept terms bla bla... then it want me choose disk again but this time none of them working....
Chassityp:Miditower Antal Installerade fl�ktar:2x 120 mm 5,25" platser (lediga):4 (3) M�tt485 x 421 x 187 mm
I have Win XP on my system and thought it might be time to upgrade to Win7 64. I don't want Win8 and heard Microsoft will stop serving XP soon.My question. I have a 2nd hard drive [1 TB] I keep my files on so I can reinstall the OS on the 1st HD easily. When I install Win7 on the 1st HD, will I be able to plug my 2nd HD back up with no problems, or will it need to be reformatted somehow? There are no programs on it, just files.
I want to install win 7 professional x64,i have a Dvd iso...Problem i want to solve is next,i have 1 sata disk ,and 1 ide disk...I want to divide Sata on two partition,c and d,and to install system on c..Next,my Ide disk ,has jumper on cable select,i think it could be the only way that is to pc work properly.Problem is ,when i install win 7 on partition c,next happens ,on My Computer,disk drives are not shown as Sataartitions c: and d: but its mixed somewhat,if i recall,itc c: of sata,and d is given t ide disk... i really want to know is there a solution to have primary sata c: and d: ,and than ide diskProcessorModel : AMD Athlon(tm) 64 X2 Dual Core Processor 4600+Speed : 2.57GHzCores per Processor : 2 Unit(s)Threads per Core : 1 Unit(s)Type : Dual-CoreIntegrated Data Cache : 2x 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line sizeL2 Cache : 2x 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size[CODE]
I have an old XP system that has died and i am building a new system to replace it. I'd like to use Win 7 on the new system meaning that the current XP software will be retired. I am purchasing new SATA HDDs and will not be using the ATA133 that has the XP installed.
If I understand correctly I can use an upgrade version of the Win 7 to perform a clean install on my new system. Correct? Any tutorials available on the process?
i'm running Ubuntu 11.10 and its working great , lately i wanted to install windows 7 alongside Ubuntu because there's no itunes on it, the problem is W7 can detect my Hard Disk and it says a driver is required ,thought that W7 has all the sata drivers ,i've installed W7 a millions times before but never seen this message .
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before.
i'm running Ubuntu 11.10 and its working great , lately i wanted to install windows 7 alongside Ubuntu because there's no itunes on it, the problem is W7 can detect my Hard Disk and it says a driver is required ,thought that W7 has all the sata drivers ,i've installed W7 a millions times before but never seen this message .
i'm running Ubuntu 11.10 and its working great , lately i wanted to install windows 7 alongside Ubuntu because there's no itunes on it, the problem is Windows 7 can detect my Hard Disk and it says a driver is required ,thought that Windows 7 has all the sata drivers ,i've installed Windows 7 a millions times before but never seen this message .
I had encountered problems with my laptop and wanted to start a fresh so I tried to install windows seven again and got all the way through the installation up until the completing installation phase then after about fourty minutesi received an error of what I beleive said windows has encountered a problem restart the computer and restart the installation and when i tried to boot I got an error after the setup is starting services screen that says the computer restarted unexpectedly or encountered an unexpected error windows installation cannot proceed, and when I restart I get stuck in this loop, I have my bios set to boot from cd drive but if I do not press any buttons it shows four different windows 7 listed, I am completely stuck in what to do, i have a dell Inspiron N5030. Im a bit of a computer noob so no jargon please, sorry if I have put this thread in the wrong part of the forum.Pretty much I'd like to know how to get rid of the 4 windows 7s and Make a fresh from my windows disk
I have a 1 TB Western Digital Caviar Black hard disk. While installing Windows 7, a screen for hard disk partition was asked. I created 4 drives: 200 GB, 200 GB, 200 GB and 400 GB. And then the windows 7 got installed. But now when I log into my PC, I can only see first 3 200 GB drives. Where did my 400 GB drive go? What mistake did I do and how can I recover it back?
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux.
I am getting problem while installing windows 7 on my single partition hard disk. I am using bootable USB drive for the installation. The error I get is "Setup was unable to create new system partition or locate an existing system partition. See the setup log files for more information". When I opened the setup log file(setuperr.log), it shows the error "Couldn't find boot disk on the BIOS based computer". Have anyone got this error before
I messed up whilst installing windows 7 over older windows 7 drive. I formatted the windows 7 drive and again tried to deleted that partition, but that deletion process took around 10-15 minutes, so restarted my system. Now i cannot install any of the windows os or even linux .
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
if I asume that a machine can boot from a USB harddisk, is there a way to install windows 7 from a USB harddisk without having to format my USB Hardisk? I read a tutorial for installing windows 7 from a USB Key, and I assume it works with a USB Hardisk too, but since the drive size is 250GB it would be crazy to format all of that to create the ISO image.
would it be possible to create let's say a small 4 GB partition and make it active/primary and write the ISO to that partition, and boot from it?
I have a desktop running windows 7 premium and will later purchase a netbook that will come with windows 7 starter. Started is dumb, and i want nothing to do with it. So can I use the same key with the installation on the desktop on the netbook without it causing issues? In other words, I want to install it on both machines. Is there a way to do this without getting another copy or using a keygen?
Found an old laptop in my attic last night, tried to boot it up but the operating system on it is corrupt (ie it won't boot up - stuck i in a loop and keep switching on and off), inserted my Windows 7 disk to try and install that but the disk drive seems to be broken too
When trying to install the sims 3 and gta 4 from DVD I get a crc error appear. I have tried making iso's of them and installing from that but same problem also I have tried installing from another copy but still same problem. I can install games from steam and they work fine.
I currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
My mother has a relatively new Dell notebook, but she did some rather stupid things with it. Nothing that I can't fix with enough time and effort, but I figure that reinstalling from scratch would yield a better result and probably take less time too. Besides, it's never a bad thing to reinstall Windows every few years anyway in my experience.However, here's the problem: my parents never bothered to order/make recovery disks. I do have a Windows 7 Ultimate upgrade disk laying around though (upgrade disks contain the full OS, right?). However, the laptop itself came with Home Premium and as such, the activation key on it is also for HP.So, can I just pop in the Ultimate disk, yet enter the HP code and end up with a regular HP edition? I vaguely remember that entering an Ulltimate code while installing from a Home Premium disk results in a full fat Ultimate, but does it work the other way round?
After installing IE9 from windows updates , can't open a folder or a hard disk by double clicking . Googling the problem found that there is a change in Registry in HKEY_CURRENT_USER/SOFTWARE/Microsft/Windows/CurrentVersion/explorer/MountPoints2 which probably affected by virus .The hard disk was full scanned four times by Ad-Aware , Spyware doctors , AVG and Malwarebytes Anti-Malware and found nothing . I deleted the MountPoints2 in Registry but after restarting appeared again . As a solution of this problem I used the Restore point created by IE9 installation and return to IE8 and everything is Ok . The probable conclusion is that the virus must be installed in the new Registry created by the IE9 installation or is triggering by the IE9 installation since there is no problem with IE8 . By-passing windows updates and downloading IE9 from Microsoft Download center would be usefull?
So my disk drive wasn't working so my husband installed a new driver, it fixed my disk drive, but now my mic (built in) stopped working. I really need it to work bc my husband has PCS-ed to Japan for 18 months, and skype is kind of out only option to talk.
i own Garrysmod, a steam source-mod. It is a game that grows dynamically as I connect to server's, download addons, and receive mandatory game updates.The game file has exceeded 50Gb before.After getting infected with "Windows 7 Antivirus Pro" and making (I freely admit it, and I REALLY should have known better) a terrible mistake and breaking all .exe's while removing the infection, I was forced to re-install windows. However, for whatever reason (another stupid mistake) I re-installed windows on the wrong hard-drive. So now my C: drive is only 150 Gb, and my backup (both of them) are 1TB.I do not have the space to have garrysmod on my C: drive, which is where steam is installed (Last time I tried installing it somewhere else it would not work.)Now that the background information is done lets move on to what you can help me with!
I have been looking for a way to install garrysmod on another hard-drive without reinstalling steam and trying to get it to work on another hard-drive. I believe I have found one, but I am really a coward when it comes to this sort of thing, (I HATE re-formatting) the solution I have found apparently tells the computer that the directory/file is on C: when it is actually on another hard-drive, but I found it in an old forum thread, and the member that had posted it was banned.
I have a new computer I would like to install my office 7 to from my old computer. No install disk....pre installed when I bought old computer but have product key
