Home Group Password From An Old Installation Of Windows 7?
Dec 26, 2011
I've just completed a fresh install of Windows 7 Home Premium. When I connected the pc to the wlan, Windows asked me to type in the Home Group password from a machine called "Uss-Enterprise". The odd thing is that "Uss-Enterprise" was the name of the previous install of Windows on the same PC...So, I'm just curious of why the fresh install of Windows did manage to get network setup information from the previous installalation. I'm shure I deleted and formatted the Windows partition before re-installing Windows, and named the PC something else.
Tech Support Guy System Info Utility version 1.0.0.2[CODE]I have two Gateway computers and I am trying to resolve a problem with homegroup sharing. I ran the network diagnostic and got the following:Either the Peer Name Resolution Protocol service (PNRPsvc) or the Peer Networking Identity Manager service (p2pimsvc) is not running. The Peer Networking Grouping service (p2psvc) depends on both these services to run properly.Then the diagnostic said failed and not fixed.
My desktop PC is running Windows 7 64 bits. I have already created a homegroup on it. But when I try to view password, system does not show anything there and if I try to change the password to a new one it fails to do! Further I can not also leave the homegroup as the system shows the message 'windows cannot leave the homegroup'.
I installed Windows Tweaks V4.0 and now I can no longer change my settings in Windows 7. For example, After exiting Windows Tweaks, my notification icons had all disappeared. When I tried to re-enable them, Windows 7 said my network admin had disabled my ability to make changes to my PC via Group Policies. My PC is in my home, not on a Network and I AM the Admin, yet I am locked out. I have Windows 7 Home Premium so I do not have a 'Group Policy Manager' program. Also, I can not disable the 'Group Policy Client' Servicesa either. I restored back to before I installed Windows Tweak and Windows Tweaks is gone but the policies remain and I am unable to modify anything. Is there a way aroound this without re-installing Windows 7 from scratch?
I have two computers running windows 7. One is a laptop, one is a desktop. Both are connected to the same router. The desktop is direct wired via ethernet, and the laptop is wirelessly connected.I set up a homegroup and successfully connected both computers to the homegroup.If I share one of the "Libraries" folders on either computer, it instantly shows up in the Homegroup folder where shared items should appear. Any other documents or folders that I share from either computer do not appear, no matter what I try.I right click, choose "share with" and then "homegroup read/write". It doesn't appear accessible from the other computer. I choose "specific people" and then add "everyone," "guest" and "homegroup" all with read/write, and it doesn't appear on the other computer.
On my desktop PC I run Win 7 Premium 64bit and I also have a new Dell XPS 16 with Win 7 64 bit Professional laptop connected to a homegroup with the desktop using wireless wi.fi. It works perfectly. I need to add an HP laptop to the homegroup network with a wireless connection. Connection to the homegroup is fine but the HP, running Vista, cannot connect to the internet. The HP laptop has no need to share files or anything on the homegroup except maybe the printer, once in a while. The homegroup has excellent access to the internet, the HP has access to the homegroup but no access to the internet.IP and DNS servers are set at "Automatically connect.." Router is a Billion 7800N with latest firmware. The desktop is in my home office, the Dell in the family room (about 30' one wall) the HP is in an adjacent bedroom (about 20' with two walls). The dell works superbly in that bedroom. Core two quad 2.8 Ghz (Q6600_ 9600GT GPU I cannot sort this one out.
I have a Windows 7 PC that's joined to a domain. The network location says "Domain network" and cannot be changed. According to Microsoft, you must set your location to "Home" in order to be able to join a computer to an already existing HomeGroup.My advanced sharing settings for both Home and Domain (domain being the current profile) show all the sharing and discovery settings enabled. HomeGroup Listener and HomeGroup Provider services are started. My Windows Firewall is enabled. I can connect to \computername of my HomeGroup computers.However, I cannot join the HomeGroup. It says "There is currently no homegroup on your network." [URL]I verified the group policy settings do not prohibit me from changing my network location from Domain to Home so that I may join a HomeGroup. However, I still cannot click on "Domain network" in order to change it to Home.How can I join this computer to the HomeGroup?
It supposed to be so simple.Trying to set up a homegroup between 2 Windows 7 Pro & Home Prem PCs. Both wired connected to an O2 Router Set up in one but never get the prompt to enter existing homegroup on the other so each PC says it's already in a Homegroup yet they aren't in the same Homegroup.
I can't add my new computer to the home group of an existing computer. When I attempt to add the new computer I get the message:"Peer networking grouping service not running"
Tech Support Guy System Info Utility version 1.0.0.1 OS Version: Microsoft Windows 7 Ultimate , Service Pack 1, 32 bit Processor: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz, x64 Family 6 Model 30 Stepping 5 Processor Count: 8 RAM: 3582 Mb Graphics Card: NVIDIA GeForce GTS 250, 1024 Mb Hard Drives: C: Total - 476837 MB, Free - 368668 MB; Motherboard: ASUSTeK Computer INC., Maximus III GENE, Rev 1.xx, 101600270001412 Antivirus: Norton 360 Premier Edition, Updated and Enabled
I just reinstalled windows and wanted to get a homegroup going for my desktop and my laptop. THe problem is some kid in my complex who was friends with my roommate has created one for some random reason and win7 only wants me to join his. Is there a way i can get his homegroup off of my network? or just make a new one all together?
Following the steps in the �Homegroup� tutorial on this site, I reach point 7, where it tells me to click on the �Join now,� button. However, that button doesn�t appear on the screens of either machine that I want to network? Opening the home-group troubleshooter, I get a message telling me that some of the problem is network related (yeah?) and these need to be resolved first. I give the machine its head and it comes back with the response that the computer�s time is out of sync, on both machines. However, clicking on �apply this fix,� brings forth yet another screen saying �Troubleshooter has completed, but was unable to fix all issues and that the problem is that my systems time differs from standard local time? I have visited the bios on both machines and made sure the times are as identical as I can get them. I�ve also checked the time in �control pannel�.
I have three computers in my homegroup. While I have been successful in sharing folders between two, am unable to do with third one.KR-PC is able to connect with RK-PC. but RK-PC is not able to connect to NUPC-PC This snap shot is from RK-PC. When I put in the homegroup password from NUPC-PC, it says invalid username or bad password.
I can create a HomeGroup from either computer but neither computer can join it,when I run the troubleshooter, on either computer, it keeps telling me "All Homegroup computers must have the correct time," however, both computers do have the correct time and time zone (I even tried synching both w/ the internet time).
Installed win8 and now trying to connect to my Windows 7 machine. Windows 7 status is: connection internet, joined, local area connection. Win8 status is internet, not joined, local area connection. So I set up a homegroup on Win 8, have a password etc. Went to Windows 7 and tried to "reset" the home group connection there. Got error messages, " Cannot leave home group and Cannot remove your computer from Home Group" The win 8 error message initially (trying to connect to Windows 7) was "type in the user name and password??" Have no idea what that might be, assuming that is for the Windows 7 home group initial setup long ago. Hence trying to reset it. Other error messages (Windows 7) during this whole process is " Peer network resolution protocal service PNRP or peer network .. service is not (P2pimsvc) running. Also, Peer networking Grouping service is not running". I have most of the settings to ON, network discovery, sharing etc. This kinda stuff reminds me back in the days trying to get a HDD recognized by # cylinders, sectors etc. Right now trying to do a discovery just times out after 3 minutes or so, even thought the windows says may take as much as 90 seconds. If it matters, all machines connect to internet no problems, and the two machines are connected via a network switch
so I have a PC and a laptop. Both windows 7 pro. But the PC is 32bit and the laptop is 64. What I am trying to do is transferring a file(video file) FROM the laptop TO the PC. I can see the libraries of the PC and I can access them and also transfer FROM the PC TO the laptop. Now the problem is, when I tried transferring FROM the laptop TO the PC, a pop up window titled "DESTINATION FOLDER ACCESS DENIED" then the message is saying "you need permission to perform this action".I have enabled all possible sharing both in the PC and LAPTOP, to no avail.
Home group in windows 7 pro keeps becoming active after I leave the home group. After reboot it is active again even after I disabled it. Anyone have any ideas what might cause this. I had to disable it in the services to get it to stop becoming active.
I am trying to setup a home group. I have created a Home Group on the main computer which has the printer hooked up directly. The printer is a Brother MFC-425CN. When i try to join the home group from my laptop, it says there is no home group to join on the network.
I'm running a 3-station LAN (2 desktops, 1 laptop) all running Win7 and Webroot Internet Security Complete (all software -- system and applications -- is fully up-to-date) through an Apple Airport Express wireless router. My settings are consistent throughout (home network, same workgroup, advanced sharing settings).The two desktops are members of the same Homegroup. The problem is with the laptop. Even though it accesses the web with no problem, it doesn't see the two desktops and can't ping either of them or the router!I have administrative rights on all three PCs while my wife has standard rights on her desktop and the laptop.One strange condition occurs in Windows Explorer where, under the Network heading in the left column, the laptop appears in from both desktop PCs (but won't expand) while neither desktop appears from the laptop.
Got a netbook that is part of a Home network. It just isn't visible on the home network. It's got the same info as far as group, like HOME. It can see the two other PCs on the network and access their shared files, but it isn't visible by the other two. The only difference is that it is wireless. The netbook runs win 7. One of the PCs runs win 7, the other xp. Everything runs fine between the two PCs. The netbook has the network discovery turned on, has files that are shared.
I can't save changes to home-group settings. When I try to share libraries and printers, printers is already checked, I check other options, like pictures, music, etc. I then click save changes and exit. The problem is when I go back in, it hasn't saved my settings - all the boxes except Printers are unchecked again.
I have two computers (towers) in Home Group. One named Silver and one named Black. From the Silver using H/G I can access the Black but from the Black I can't access the Silver computer. Received code 0x80630801 with error 1068. Peer Network Grouping Service not running. At times PNRP service and P2Pimsvc also will not start. I have tried several times in Services to turn them on but they won't start. I ran sfc /scannow, no problem found. Both computers got Tuesdays Windows updates so I don't think that is the problem because it only effects one computer. I removed the latest thing I installed on the Black computer, *LG BlueRay programs. Networking mapping looks as it should. This all was working for about a week or so when I made the Home Group.
So I have fibre optic broadband and I connect my PC and Xbox 360 together through my PC motherboard LAN connections.To explain what I have done is I have two LAN connections on my EvGA 680i motherboard and I have bridged out these two ports because I find it is is easier connecting the Xbox this way as I don't have to deal with the firewall issues and programme each file to access it and it is just smoother with no dropouts.The problem that I have though is as soon as I start up the Xbox 360 then my PC and any other laptop has this issue.Firstly the two laptops connect wirelessly.As soon as the Xbox fires up firstly it switches on my partners HP DV6000 laptop and this might be because it is a media laptop and has an infra red remote which perhaps frequencies are crossing. I can live with this.The issue is the network.Both my PC and the laptops automatically switch from a homegroup to a public network.
My PC is fine if I reboot, it will revert back to the homegroup but my partners laptop will not. It stays on this public network and so she can't access the internet.I have tried changing and managed to change back to a homegroup but it is confused in that it does not know which homegroup to connect to.I have typed in the WPA code but it does not appear to recognise this as our network.Is it because I have bridged the LAN ports and it is confusing Windows?All are using Windows 7. PC and HP laptop are Ultimate and other laptop is Professional.
My home network has 4 computers(including mine) running windows 7, and all of them are connected to the same router/access point for internet connection. When I created a homegroup, and went to add the other computers, they created another homegroup and the other 3 computers are now in the same homegroup. However on my side, it detects no computers. I clicked "leave homegroup", and it detected no homegroup on the network. The other 3 computers are on the same homegroup and are able to share files and printers. I cannot join the homegroup when i click homegroup in windows explorer it only says there is no homegroup on the network and asks me to create a homegroup.
I have 4 desktops, 2 laptops all running Windows 7 Ult. 4 X64, 2 X86. 4 satellite receivers, a WII and 2 PS3's all on line. I have the following setup for my network.I have a Thompson DC476 Docsys 3 plugged into a DR-615 which does the DHCP, which is plugged into a 24 port Cisco Catalyst 2950. Which feeds the rest of the house. Upstairs I have a 4 port Netgear as a dumb switch that does the wireless for the phones and a tablet and the WII.There are no real configs on the Cisco other than PORTFAST has been enabled and all ports are is switchport mode access on the default VLAN.The only way I can get the Homegroup to work is to plug all the PC's into the DR-615 and the Netgear while ensureing the Netgear is plugged into the DR s well. If they (PC's) are connected through the Cisco I loose the Homegroup. I can still see all end devices in Windows and access them as long as I've shared it out.
Have two latops, both running Windows 7, both on home network linked to BT homehub. Once had homegroup working and found it very helpful. Not sure what created original problem but now can't reestablish link - despite many many hours of trying. Can create homegroup on each laptop separately, but neither appears to 'see' the other. So once I have set up a group on one laptop, and go into the homegroup set up on the other, the 'join now' option never appears - all I get is the option to 'create a homegroup' on the second laptop. I can create a homegroup on both giving them the same passord etc but they still don't 'see' each other. Both laptops say they are joined to a homegroup, but when I click on the homegroup icon I get the message 'there are no other people in the hoemgroup'.Have run all the usual troubleshooters - the time is the same on both PCs, they both have the same workgroup name.
trying to configure a Home Group between a desktop Windows 7 64 Ultimate and a laptop Windows 7 64 Home Premium.Reading the forums and MS instructions didnt do, so I did an ipconfig /all on both.In the desktop Netbios is not active, but client for MS network is checked in the adaptor, file and printer sharing also in the adapter.Services show TCP Netbios as automatic
I am trying to connect to a home group in windows 7; However it says I must set my network to a public network on both computers first. I don't know what I am missing - but I am unable to find where to do this. If anyone can help by providing step by step on how to adjust my home network to 'public' - I am sure it something easy, but I just can't seem to find it.
I am setting up multiple machines to run Windows 7 on my home network. I would like the users to have the same profile settings regardless of the machine they log into. Can user profiles be synced between machines within the same homegroup?If not, during the setup of the user, can I copy user preferences/profile settings so when they log in for the first time they don't have to reset everything?
I have windows 7 installed on one computer, W2000 on the rest. I made the mistake of activating Home group, now I can no longer see my other computers.
I'm sure I'm being awfully thick, but can anyone tell me what to do to see them?
