Have No OS Installation Disk But Need To Use Command Prompt To Repair
Jan 2, 2013
Trying to get windows seven to boot again. Have no installation Disk. Made a recovery disk which has not worked. Tried using super grub boot disk and it did not work. probably messed up the partition order following those instructions. Have Linux Ubuntu 12.04.1LTS installed on separate partition. Have command prompt ability, used bootrec,exe/ RebuildBcd and got total identified windows installations. I'm thinking my best bet is to purchase windows 7 and install clean.
View 7 Replies
ADVERTISEMENT
Jan 11, 2011
I was stupid enough to manually delete my acronis files when I couldn't uninstall it the ordinary way.
Now windows 7 gives a short BSOD after logo and computer restarts. Startup repair doesn't fix the problem, neither from my windows 7 usb or from laptop, I have tried it several times.
I don't have any system restore created. I don't have any system image either to restore to either.
I really don't want to do a clean install again and wanted to try to do a repair upgrade, the problem is I can't boot into windows to begin with, and this seems to be needed to do a repair upgrade. When I try to do it from the USB it says I need to boot into windows first.
Is there a way to start the repair upgrade without having to boot into windows?
When I press F8 I don't get the options of safe mode, probably because I set the "time to display list of os to 0". Since I can't boot into windows 7 I can't change this above 0. Is there a a way to set this time above 0 from command prompt from my windows 7 installation usb?
View 9 Replies
View Related
Jan 31, 2012
i cant run any commands in command prompt.i have checked a lot of stuff on inet to solve like paths @environment variables etc but i still couldnt solve it.i thought maybe its cuz a system file is missing made a repair disc but couldnt run sfc via command prompt at boot because i got this error saying "thıs verıson of system recovery ıs not compatible with the version of windows you are trying to repair"
View 9 Replies
View Related
Feb 21, 2012
I recently had a laptop crash (Windows 7 Home Premium x64) during a windows update, had to go through lengthy process which ultimately resulted in need to do system recovery from protected partition on an Acer laptop.
One of the interim steps i had tried was to run chkdsk from a command prompt after having been able to reach "repair your computer". I originally had to create a repair disk to get there, but eventually was able to access it from the computer's hard drive.
Run from the command prompt under start-up repair, the chkdsk was PAINFULLY slow, running for more than 12 hours and without getting through the first step. Granted, it did seem to be trying to fix errors.
I came across something about it being slow based on allocation of system resources in the start-up repair. I wanted to see if anyone could elaborate on that. Now that I've gotten the system recovery working, I'd like to run chkdsk again, and I don't want that to take days. My thought is to run it from an elevated command prompt (run as administrator). I'm also thinking that the /x switch will be needed to run this on the c:drive.
View 6 Replies
View Related
Jul 31, 2012
Is there some way to determine installation date of software (or 'last used' date shown in Add or Remove Programs) via the command prompt in Windows 7 and Windows XP?
View 2 Replies
View Related
Sep 23, 2012
Trying to install windows 7 on my new hard drive since my old one died on me, I set it to boot from disc and it just loads up the cmd prompt. I'm sure I just have to enter a cmd but I can't seem to find anything that works. I've searched around of course but haven't had any luck so I give up.
View 4 Replies
View Related
Dec 14, 2011
i can no longer boot my windows 7 i get blue screen each time, if i try f10 key (recovery) it trys to load the files needed it goes all the way then blank screen and zit waited 30 mins in cmd i try chkdsk but get volume if write protect
View 1 Replies
View Related
Sep 29, 2010
trouble is, the Repair Disc is useless. All it does is "Load Files", then the hard drive light blinks for what seems like forever, then a mouse cursor on a black screen, and then. well, nothing. I've unplugged everything but the mouse, keyboard and monitor and still nothing. No matter what I do, nothing. Safe mode, recovery, last known good--all do the same thing.The computer boots Ubuntu with no problem, and I can even see the Windows files. (Is that partition supposed to be 'bootable'? It isn't.) Ubuntu tells me there are errors with the $mft whatever that is.
I just don't get it. When I boot from a disc, I expect the machine to boot FROM THE DISC!What is the machine doing for an hour? Every operating system I've ever had could boot from a disk to text mode with a command prompt. All I want to do is fix the mbr or partition table or run chkdsk and see what the problem is. Why won't the repair disk do ANYTHING?I had to replace my motherboard after it burned out, so the discs from the manufacturer are no use. I'll have to buy a new Windows 7 and reinstall
View 8 Replies
View Related
Apr 27, 2011
Trying to create a batch file for Windows 7 to run a command (elevated ) in command prompt?User: is an administrator or in administrator group ( but actual administrator account may be disabled )essentially need to be able to double click the *****.bat filehave it open up cmd in elevated ( run as administrator ) , run the command in the dos window and reboot the computer.
View 2 Replies
View Related
Jun 9, 2012
In UNIX, for changing the directory path, there is "cd" command. .This works fine in windows 7 too.. But the problem comes when we are trying to change the path using environment variables. .
In UNIX, cd $JAVA_HOME changes the path to the value set for JAVA_HOME,
Similarly is there any command in Windows which does the trick from command prompt for changing path using Environment variables. .
View 1 Replies
View Related
Jul 22, 2011
Ok So I got myself into a unique bind here. I was trying to install some custom system files (for a theme) and I did it wrong and now I cant open explorer.exe . I dont want to goto a backup because this is a easy fix. (in my view). So I need to know how to run command prompt with administrative privleges from command prompt.
I am trying to do this command: copy explorer.exe C:Windows
So if there is also another command I can just tack onto that that gives me admin rights to do it. I would be happy.
View 5 Replies
View Related
Jan 9, 2012
Does any one know how to get the win.ini missing fixed when opening bootcfg/msconfig not found. Also How to change "forcing changes in msconifg" to "not forcing changes" in msconfig from command prompt, as well as opening msconfig from command prompt w/ dos command(s) / paramteters.
View 1 Replies
View Related
Feb 8, 2012
My laptop Specs below:
Acer Aspire 5742
Intel i5-480M
6GB DDR3
Intel Graphics
It started when I needed to take the computer back to factory default with a fresh install. It was going back to Acer to have the charger point fixed (charger socket had become loose but still charged when it was held in). I used the control panel interface to reinstall windows, all was going well until the laptop power died, I restarted the laptop and the screen displayed:
"Setup is starting Services" a pop up box then appeared with "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer and then restart installation."
I have searched around the net and found a few guides but most require a repair disc or Installation disk. I have neither. Is there any way of starting the install again? For example from Command Prompt?
View 4 Replies
View Related
Jan 2, 2013
Today I booted up my computer and got a screen saying something went seriously wrong with my computer and that I should repair it from an installation disk. I load up windows onto a USB, boot it and click the repair option. It's been about half an hour and nothing has shown up. Is it still loading or perhaps something is very wrong with my PC?
View 2 Replies
View Related
Apr 3, 2011
I was just wondering id it was a good idea to have an extensive knowledge on the windows command prompt and how to use it. If so can anyone share some links to where I could see some tutorials?
View 6 Replies
View Related
Jan 11, 2009
How to Open a Command Prompt in Windows 7 ?
View 0 Replies
View Related
Jun 23, 2011
how do you run CD ROM from command prompt
View 1 Replies
View Related
Feb 8, 2012
when i try to run a .jar file i get a command prompt that disapeers after about half a second how come?
View 1 Replies
View Related
Jun 23, 2011
I'm having an issue on my computer where command prompt will not open. I looked in the system32 folder and cmd.exe is missing, however there is cmd.exe.mui is there. I also tried to run hijackthis to get a log, however the program keeps spitting out a blank log when I click save log.
View 14 Replies
View Related
Aug 28, 2011
I am trying to run command prompt in windows 7 professional, but it is not appearing in front of me.
1. I tried to run it from Start --> Accessories --> Command Prompt
2. I tried to run by typing cmd on the start menu and then finding the .exe file
3. I tried to run using Run command by typing cmd in Run dialog box
4. I tried to run it from C:/Windows/system32 folder
5. I also tried to run it using right click and then selecting Run as Administrator
But whatever I tried to do I cannot see the command prompt window.Also, when I run the task manager, I can only see the cmd.exe running in the 'processes tab' and that too one new process for each time I have clicked on the cmd.exe.But it does not show cmd.exe in the 'applications tab' where it should be showing.
View 1 Replies
View Related
Aug 10, 2011
My computer (Toshiba Satellite running Windows 7 Home Premium) acquired some sort of terrible virus and shut itself down. When I try to turn it on, it goes into startup repair, and startup repair always fails. I have tried every single system restore point, and that fails too. When I try to start it in any of the safe modes, it simply goes back to startup repair and fails again.
He was able to access C: in command prompt. All my files are in their original locations and haven't been corrupted, but there are also four folders with names like xisdfl83lkd02 (seriously) which definitely weren't there before and presumably contain whatever has crippled my precious laptop. Whenever he tried to delete those folders, the command prompt looked like it had accepted the delete command, but then when he went back into C they were still there. So the bad files are immortal or something.
He said he was able to move things around, so I should get an external hard drive to back up my files, wipe the computer back to factory settings, then put my files back on it from the external hard drive. Well, now I have an external hard drive but don't have him around to do this.
I have absolutely no experience with command prompt, and I've read a bunch of tutorials on how to use it, but they aren't dumbed down enough for me to understand them. I need someone to walk me through it.
I can access the command prompt, but it goes into X:\sources\recovery\Tools> as a starting line. The thing at the top says Administrator: X:\windows\system32\cmd.exe. I didn't even know X was a real drive. I try to get it to C and it just goes back to X. When I type cd E:\ or cd F:\ trying to figure out where my external hard drive is, E says "The device is not ready" and F takes me right back to X:\sources\recovery\Tools>.
How do I get to the directory where I can find my files and move them to the hard drive?
View 1 Replies
View Related
Jan 6, 2013
Alright so for the past few days my girlfriend's computer has been having a very quick command-prompt-looking pop-up within 10 minutes of starting up. We weren't able to catch a glimpse of what it said until today, as the pop up is literally less than a second long.We recorded her screen and were able to pause at the time of the pop up, discovering what the pop up is.
View 3 Replies
View Related
Feb 9, 2012
This probably is not new to many, but I find it useful.There are times I want an elevated command prompt. I usually type in "cmd", right click on it and run as administrator. If you need an elevated command prompt now and then, simply create a shortcut to "cmd". Right click on the shortcut, left click on properties. Click the shortcut tab and select "advanced". Finally, you can select "run as administrator".Like I said, just something I didn't think about before, but it's handy to have.
View 6 Replies
View Related
Apr 30, 2012
Trying to partition a HDD to install an OS. All was going well till I tried format the active partition - error: Parameter is incorrect
View 6 Replies
View Related
Nov 11, 2012
so today i tried to open my command prompt because i tend to allocate more ram to minecraft whenever i play. I searched for it, and it was not even there. i searched cmd, went into accessories, and even did SHIFT-RC and it said "application not found". so is there any way i can get this back?
View 2 Replies
View Related
Jan 27, 2013
I'm using a SSH server to remotely access my notebook from work. It works well for SFTP and remote command line access using a dedicated, non-admin, user account.Problem is when I want to run something that requires admin permission under that connection. The server runs cmd.exe under the context of a non-admin user I've created for it, so I'm limited in what I can do. Question is, how can I "elevate" that remote command prompt to execute admin-only programs and commands? UAC of course will not help under that conditions.
View 5 Replies
View Related
Dec 30, 2009
How to Personalize the Command Prompt Window ?
View 0 Replies
View Related
Nov 24, 2008
How to Open a Command Prompt at Startup in Windows 7 ?
View 0 Replies
View Related
Jan 20, 2009
How to Open a Elevated Command Prompt in Windows 7 ?
View 0 Replies
View Related
Feb 23, 2012
Is this Possible to check Operating System Language through Command Prompt ?
View 4 Replies
View Related
Mar 9, 2011
When I type a command in the CMD I get a message saying that the command is not recognized as a internal, external.
View 6 Replies
View Related
