I'm tasked with creating a triple boot setup using the OSs mentioned in the title. All operating systems must be installed on the same drive with a fourth partition to be accessible by all 3 (for sharing of files). The triple boot MUST be done using the Windows 7 boot manager, so EasyBCD and other managers are out of the question. I've never even heard of the latter 2 operating systems and need it done by Tuesday if possible.
I have Windows 7 and openSUSE running on my laptop. Windows 7 was installed first and SUSE later. Now I want to completely remove OPENSUSE and just keep windows 7. How do I do it.? coz Laptop boots viz grub. I heard if I remove Linux partition then windows might not boot because of GRUB. Can I do it with FIXMBR.
I have a Toshiba laptop that came with a preinstalled copy of Windows-7 (64 bit) version purchased in July 2010. No setup disk came with the laptop, but there is a "Toshiba recovery media creator" utility. Now, I want to format my laptop, and here I have few queries regarding this:
[1] What is the better option for formatting my drive? Should I use the Toshiba media-creator or install a clean version of Windows-7 from an ISO download (am I allowed to do that? If so, what is a good site to download?) There is a "sticker-certificate" on the bottom of my laptop with a product-key. Will it work with the new install?
[2] Do I have the option of installing a 32-bit version of Windows-7 instead of 64-bit with the above license? The reason is that most applications I use are 32-bit and hence a 32-bit OS is better suited for me. But does the license allow me to do that?
[3] (The tricky part) - Since I have a good 320GB HDD, I want to dual-boot by creating two partitions - with a linux distribution (Ubuntu/openSuse) running on the second partition? Assuming I don't have the option of clean-install, will I be able to create the extra partition for linux using the Toshiba utility?
I had a new system made up for me a few months back and as I was so insistent on excellent cooling - fans - RAM etc, I didn't pay enough attention to the HDD's.
Subsequently the system was installed on an SSD 60GB. For a normal user this would be adequate, but I work with a lot of digital programs that write to the app data folders and I can't safely move those onto the D:Drive where I have programs and Docs - all libraries. I have hard linked everything I could, but the more Windows updates and other updates I do, the Winsxs folder is already 7.2GB.
I only have 20GB's left after a short time and would like to be able to install another Windows 7 x64 on a 1TB drive I can free up easily. Ideally, I want to keep the SSD drive as an OS to use for general use and get all my graphics programs onto a different system for work purposes.
I have not ever multibooted before and have no idea how to go about it - or I do but it could be wrong.
Is it even possible to have one OS on an SSD and the other on a HDD? I do have an extra unused OEM version of Win 7 x64 ultimate and hope that is legal to use two OS on same machine.
Here's what I'd like to do. I've got vista on my first disk which is a regular hdd. I installed Windows 7 on a new ssd a month or so ago.
I wanted to get rid of my vista installation since I am no longer using it, and then I wanted to format the vista disk and use it to save all my data on it rather than the SSD.
However, my current problem is how to get "rid" of the vista installation while still being able to boot to Windows 7. I've looked at bcdedit from Windows 7 and it seems that all the boot info is on that vista drive. I unhid OS files, etc., and it does indeed look like they are on the vista disk. I sort of expected this, so I'm not surprised to find out that it is there.
So, here are my questions. What do I need to copy to the SSD, and what do I need to edit to make the SSD bootable? I'm pretty sure I need to go into disk management and set the SSD to be the active system partition, but I also suspect that there is some other stuff I need to copy to the SSD from the Vista disk, and maybe I need to edit the bcd and maybe some other registry info.
I installed opensuse 12.1 on dual boot along with my other windows 7 installation. Installation of opensuse is successful and i can use it. But when I tried to use windows 7 on grub, it says bootmgr is missing. I've already encountered this problem a long time ago so i tried to use bootrec /fixmbr, bootrec /rebuildbcd and bootrec /fixboot in the recovery console in the windows 7 DVD. Rebuildbcd and fixboot did not work and it said something like it cannot find my windows installation. I also tried bootrec /scanos, it returned a windows installation on D:\Windows but my windows is in drive C. I think this has something to do with me messing up the active partition in disk management a month ago but i already fixed it by setting the active partition to the system reserved partition. Only fixmbr is successful, but now i can't boot on any OS because it says: Missing operating system.I also tried bcdboot C:\Windows but it failed with a message that goes like: Failure when attempting to copy boot information..
How do i get rid of Vista because that was the main reason why i wanted to install 7 instead so it would delete everything but now its got 7 and vista on... how do i get rid of windows vista. I even did the Advanced Custom install not the upgrade and everything is still on my HD with Vista. I only want 7
Thinking ahead to when this copy dies on me & I have to format this partition...how does one restore ones original boot settings when in a multi-boot scenario of XP, Vista and Windows 7 in that order?
I posted the question on Pro Networks too as they have the detailed instructions for doing the same for Vista snd just wondered if you guys have any ideas?
1. On a system with Windows XP, can I install the upgrade into a 2nd partition to create a multiboot Windows XP/Windows 7 system? I do have retail Windows XP Pro media full version.
2. On a system with Vista, can I install the upgrade into a 2nd partition to create a multiboot Vista/Windows 7 system? I do not have Vista on media, it was pre-installed on the system.
3. On a notebook computer running Vista, should I choose to do so, could I install Windows 7 over Vista? Might I get into trouble due to proprietary notebook drivers?
4. On a notebook computer running Vista, should I choose to do so, could I uninstall Vista and then install the Windows 7 upgrade? Might I get into trouble due to proprietary notebook drivers? Also, since I do not have Vista on media, how would I prove that I qualify for the Windows 7 Upgrade?
Have you ever been in a situation where you desperately need help? Well, I'm in that position currently. This is a time-essential matter and I am appreciative to ANY help/tips/ideas that you have. I seriously need some ****ing help here.
Alright, I have two hard drives. C, and Y.
C is the primary hard drive from which I boot Windows XP from, and Y is where all of my other operating systems will be. I had only XP installed, and I decided I wanted to use Windows 7 as well as other operating systems such as Fedora. I first installed Windows 7, and for whatever reason it didn't recognize XP, so it would only boot to 7. I tried and tried to get 7 to recognize XP on boot, but it simply wouldn't. I figured installing Fedora might help, but it didn't. I also tried using EasyBCD to get XP to function, but alas - it won't help.
If I remove hard drive Y, and try to boot to XP it says NTLDR is missing. I've tried ****ing everything to get XP to work. I used a boot cd, I tried XP's install disc (whenever I try to copy the ntldr files it won't let me write to the hard drive, it says Access is Denied.) and I cannot install Windows XP all over again. That would truly be a disastrous solution.
What I want to know is
1. How can I get XP to boot again?
2. How can I get Windows 7 to recognize XP when I install it?
3. After Windows 7 and XP are working harmoniously, how can I get other operating systems like Fedora to work?
Has anybody tested this before? YUMI - Multiboot USB Creator (Windows) | USB Pen Drive Linux It appears to promise a way to boot from USB to multi and select-able ISOs?So the software would format the USB drive for me once, and I could then add ISOs for Windows 7 pro, Ghost and GParted?If this works.. I would not need CD/DVDs devices or media on newer desktops..
Well first off, I am running Windows 7. Its been the best to me except one thing. My printer only has 32 bit drivers and I have a 64bit OS. What I did was partition my drive and install Windows XP home on that partitioned drive. The installation was successful except that XP was now the only only thing that was bootable. I couldn't multiboot. It would always start in XP. To make things worse, I couldn't even go online on XP.
I had found a solution to dual boot but it required me to download something from windows update. Even if I was able to dual boot, I still wouldn't be able to go online. So I put my Win 7 disk and repaired it which made windows 7 my boot again. Then I deleted my whole windows xp partition (I hope that doesn't damage it)
So... Now I need help. I want to try to install xp again but I want win 7 to be my main boot instead of xp taking over like it did. Also not being able to connect to the internet with xp. What could be the problem?
A while ago I bought some new big 1TB HD's and decided to install windows 7 Ultimate onto one of them. To make the transition from XP to 7 easier for me I decided to do a multiboot so i could switch back to XP if i needed something.Once i had everything the way i wanted it and i was no longer using XP i decided to remove the old HD. Also it was an IDE and it was cluttering up the inside of my computer. Now whenever I unplug the original HD i get a boot disk failure.my guess is that my computer is looking to the C drive for where to boot windows 7 but I dont know how to change it so that it looks to that HD instead.
I have 2 hard drives, the first has Win 7 RC1 and the second has XP and Vista in their own partitions. The Win 7 boot loader gives me the choice of Windows 7, Vista and XP when I boot up. The question is: If I install Ubuntu onto the second HD in a currently unoccupied partion, will GRUB (which is sure to take over the booting process, from past experience) still leave me with the 3 choices I have now (assuming I do not select the Ubuntu prompt). I wwould hate to lose the ability to get into the 3 Win systems !
I spent the last three days trying to repartition my Windows 7 drive. I have a HP Pavillion Laptop that I am going to take to college. Before I go, I want to partition my drive to create two PCs. The C: drive will be a gaming PC which will inevitably get full of bloatware and run slow. I need the B: drive (partition) to have as little of the RAM as possible tied up in background applications. I've tried to install Windows 7 on both partitions, but it won't install twice on the same physical disc. Can I just choose which partition I want to use on startup, and would that keep my RAM free when I need it?
1. How to download in Windows 7 from Internet to a DVD to create an ISO image? 2. If the ISO image is larger than the full capacity of one DVD how do I create the full image? 3. Once I create the full image on one (or more) DVD , how do I transfer the ISO image to another HDD? 4. Can I create an ISO image directly on a 2nd HDD? 5. Can I create an ISO image of the Windows 7 OS on a second HDD? I have tried to create an ISO image for a few months and i haven not been able to do it. Special note: 6. How could I copy the Win 7 OS into an ISO image on one or more DVDs? 6.1 What size is Windows 7 Home Premium OS? 6.2 Which partition does Windows 7 store the OS in?a. "Recovery" ? b. FAT32 ? how to create the ISO image, how to install it, and how to make sure that the "image" could be used to fo make a backup of my HDDs and also how to use the backup to fix the computer should a fatal crash prevented from booting up Windows 7? IMPORTANT: I use only DVDs, mostly re-writables. Which is the best free Image Burn Software that does work with DVD's.(as I dont use CD's anymore)
is there a way i can back up my PC and have it in an iso format? I have looked at acronis but it give me an .tib. I want to create and ISO of my whole PC to an external nas.
I have a USB Drive that I can use to install Windows 7. I would like to know how to put the Windows 7 Installation files that are on my USB on to a DVD so, I could boot to the DVD and install Windows 7.
I have a number of rss feeds of shops that I buy from on a regular base, and have placed them on my favorites bar. When a particular shop lists a new item the name shows up bold, after I clicked on the new item in the list that drops down and load that page, the name of the feed goes back to normal.
I've done it 100 times so you'd almost expect I would remember... NOT.
One of the feeds didn't seem to work anymore. When new items were listed, the feed name didn't change to bold. So i removed the rss feed from my favorites bar, and deleted it in the favorites list.
I tried to make a new rss feed by going to the shops website, click on the rss feed logo in Windows 'Tools'. That brings me to a rss feed but I cannot click on 'subscribe' anywhere, so the rss feed doesn't work. I had one favorite that showed up as an rss feed in my favorite list but when I put that in my favorites bar and clicked on it it said something like 'no contents' or something.
I recently got a new PC it has Windows 7 Pro 64Bit OS. My old XP box finally died. I have my music drive which is external USB 500 GB drive Seagate Free Agent drive. I used in on my old system. I have about 110GB of music on it. It is my main music drive. I got some new songs that i wanted to add to the drive. I tried to make a new directory and I received a message saying that I don't have permission to create a folder. I tried creating a new folder within my music directory. I can create a new folder within the root of the drive but I cannot create a new directory where I want it. I am an admin on the PC so I even made sure that I was added as a user on the drive when I set permissions and sharing.
I read somewhere recently that win 7 can create an iso file, just by sticking a cd and right click on the desktop and choose Burn. It suppose to have its own iso burner built in. I did just as that message said and nothing popped up. Now, it could be that it may be only on one of the win 7 versions, mine is the home premium one.
Just purchased my first Windows 7 Professional (64-bit) PC (Hewlett Packard). No media was supplied with the machine and I have been advised that media is not shipped anymore (apparantley it is Microsoft's way of ensuring media cannot be loaded onto several systems).
Reading comments on the internet it seems clear that I have to make an ISO file, but I'm unsure what directory/files I need to pick and copy.
i am tried to create schtasks in windows 7 but the task is not popup at scheduled task time. command is: schtasks /create /tn prabhu /tr notepad.exe /sc once /sd 5/2/2011 /st 10:00:00 /ru prabhukumara /rp prabhu
how to create schtasks in windows 7. the above command works fine in windows XP. And to run schtasks administrator permission is nessessary or any user can run the task.
I installed Windows7 Ultimate from scratch, and it warns that it might create a 100MB partition before creating a second one where the real stuff lives. This makes imaging more complicated.
Code: # fdisk -luDisk /dev/sda: 320.1 GB, 320072933376 bytes255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0xf1f75308 Device Boot Start End Blocks Id System/dev/sda1 * 2048 206847 102400 7 HPFS/NTFSPartition 1 does not end on cylinder boundary./dev/sda2 206848 30722047 15257600 7 HPFS/NTFS/dev/sda3 172908544 254828543 40960000 83 Linux
Does someone know why Windows7 needs two partitions, and whether it's possible to have a single partition?
I'm also interested to know if any steps are required before imaging Windows7 (sysrep, etc.) where the image will be reinstalled on the same host (own test machine).
The tutorial for creating the bootable XP disc worked great and I would like to have a backup with SP1 on it for my Win7 Home Premium x64 (retail version). I didn't see anything in the Win 7 tutorials, maybe it can't be done with 7, but if it can I would do it so I have the cd with SP1 on it already.
